null  null
Product information
Pro-Ject Phono Box II
MM/MC Phono Pre-amplifier
Good sound from sound technology
Metal case shields the electronics from vibrational and electromagnetic interference
Optimal channel separation through dual-mono circuitry
Special low-noise ICs used
Gold plated RCA connection sockets
Outboard power supply included
Amplification and RIAA equalisation for MM and MC cartridges
Phono MM/MC selection switch located at the rear of the unit
Small size allows installation close to record player
Technical specifications
Input impedance, MM:
Input impedance, MC:
Gain, MM:
Output voltage typically:
Gain, MC:
Output voltage typically:
Max. output:
Noise floor, MM:
Noise floor, MC:
RIAA-equalisation curve accuracy:
Outboard power supply:
Power consumption:
Dimensions W x H x D (D with sockets):
300mV/1kHz at 3mV (MM input)
300mV/1kHz at 0,3mV (MC input)
9,5Vrms / 1kHz
86dB (94dB / A weighted)
68dB (75dB / A weighted)
< 0,01%
< 0,05%
20Hz - 20kHz / max. 0,5dB
16V/200mA AC, suitable for your country's mains supply
16V/30mA AC
103 x 36 x 103 (115)mm
570g without power supply
The manufacturer reserves the right to alter the technical specifications without notice.
Available in silver or black finish
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697 · © Heinz Lichtenegger · Revision 1.6.10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF