1/4 DIN Temperature Controller PDS 2110

1/4 DIN Temperature Controller PDS 2110
http://www.chromalox.com
PDS 2110
1/4 DIN
Temperature
Controller
• Easy Three-Step Setup
• High Current Output
Option
• 10 Amp Solid State
Relay
• 20 Amp Mechanical
Relay
• Plug-In Output Cards
• J, K Thermocouple, or
RTD Selectable Inputs,
°F or °C Indication
• Alarm Relay Output
Option
• NEMA 4X Front Panel
• Compact 1/4 DIN
Design 4” Depth
C
UL
¤
Description
The Chromalox 2110 Temperature
controller offers simple setup,
flexibility and control features in an
attractive, compact design that both
OEMs and users will find cost
effective. The 2110 is housed in a
rugged, plastic 1/4 DIN package
that only requires four inches
behind the mounting surface.
Straightforward operation and easyto-use control features are major
strengths of the 2110 controller.
The 2110 features a variety of output
cards including High Current options
of a 10 Amp Solid State Relay or 20
Amp Mechanical Relay. These
outputs can directly control many
cartridge or strip heaters, eliminating
the need for a remote contactor or
solid state relay. For larger threephase loads, the 2110 can drive a
remote device with the Pilot Duty
Relay or Solid State Relay Drive
outputs.
Easy Three-Step Setup: The 2110
delivers exceptional process temperature control. Your process is up
and running after three easy setup
steps: 1) Select the sensor and
control type, 2) Hook up the system
and 3) Select the desired temperature.
The optional Alarm Output gives you
a non-latching, normally de-energized, 5 Amp relay output for over or
under temperature protection of
critical process temperatures.
Full Feature Outputs: A total of six
output functions further extend the
applications flexibility of the 2110
controller:
• 1 Amp Relay
• 20 Amp Relay
• Solid State Relay Drive
• 1 Amp Solid State Relay
• 5 Amp Solid State Relay
• 10 Amp Solid State Relay
US
Packaging with the User in Mind:
The 2110 features a NEMA 4X front
panel with tactile feedback push
buttons. The buttons allow even the
heaviest gloved hand to easily
configure this controller. Large,
bright LEDs provide an easy-to-read
interface at a distance.
Flexibility: Output cards are plug-in
modules that are field replaceable.
The switch-selectable control modes
include On-Off or ProportionalIntegral (PI).
IS 9001
A P P R O V E D
¥ C E R T.
N O .
A 3 1 6 4
¤
PRECISION HEAT AND CONTROL
Phone: 1-888-996-9258 • Fax: 615-793-3563
www.chromalox.com
©2001 Chromalox, Division of Emerson Electric Co.
http://www.chromalox.com
2110 Temperature Controller
Easy Three-Step Setup
1. Select Sensor and Control Type
Locate the input selection DIP switch on the bottom of
the 2110 controller and simply select °F or °C, Thermocouple (TC) or RTD, the Thermocouple type (J or K),
and PI (Proportional-Integral) or onof (on-off) control.
2. Hook Up System
Chromalox¤
Connect system wiring to 2110
controller for the load, sensor and
optional alarm output if used.
2110
Load
¡F
Alarm
¡C
Temp
Set Point
Heater
Output
Input
Set
Point
Sensor
Process
Alarm
Output
3. Select Temperature
Press and hold the Set Point key while using the Up or
Down arrow keys to adjust the Set Point to the proper value.
NEMA 4X Front Panel
Construction for
Hosedown Applications
Display
(4 Green, 7-Segment LEDs)
Actual Process Temperature
Displayed
Chromalox¤
¡F
Alarm
¡C
Output LEDs
Indicates Control Load ON
and Alarm Status
Temp LED
Indicates Actual
Process Temperature
is Displayed
2
®
2110
Load
Temp
Set Point
Green LEDs
Indicates °F or °C
Selected for Temperature
Display
Set Point LED
Indicates Set Point
Temperature is
Displayed
Set
Point
• 1382 Heil Quaker Blvd. • LaVergne, TN 37086 • PH: 1-888-996-9258 • www.chromalox.com
http://www.chromalox.com
2110 Temperature Controller
Features
Heater
High-Current Switching
The 2110 features high current output switching (Relay and
Solid State Relay) eliminating the need for an external power
switching device and reducing installation cost. Single phase
loads up to 20 amps may be directly connected to the 2110,
eliminating the need for a remote contactor or solid state
relay. The internal relay option R3 can switch up to 20 amps
or the internal solid state relay option S2 can switch up to 10
amps. The 2110 automatically detects the output type and
adjusts the controllers setting for optimal control.
Typical
Controller
Fuse
L1
Contactor
L2
Chromalox¤
2110 Control
Chromalox¤
2110
Load
¡F
Alarm
¡C
Temp
Heater
Fuse
L1
Set Point
L2
Set
Point
Control Modes
The 2110 provides precise, solid state proportion control with
automatic reset (PI) that will control precisely most heating
applications. ON/OFF control may be selected for applications where maximum output life (load switching) is needed.
Specifications
Open Sensor and
Out-of-Range Conditions ...................... Displays “SEnS”, Control output 0%
Control Modes
ON/OFF
PI—Proportional with integral
Instrument Power ...................................... 90 to 260VAC Less than 10 VA
Control Adjustments
Proportional Band ................................... Sensor range
Automatic Reset ...................................... 0.0 to 99.9 repeats/minute
Cycle Time .................................................. 0.1 to 60.0 seconds
On/Off Deadband .................................... 1° to 100°F or °C
Set Point Upper Limit ............................. Sensor range °F or °C
Set Point Lower Limit ............................. Sensor range °F or °C
Output Limit .............................................. 0 to 100%
Alarm Adjustments
Type .............................................................. Absolute High or Low
Set Point ...................................................... Sensor range °F or °C
Alarm Dead Band .................................... 0° to 100°F or °C
Control/Alarm Outputs
Relay (R1) ................................................. 1 Amp Form A, 120/240VAC
Relay (R3) ................................................. Form A, 120/240VAC resistive loads
at 30 sec. cycle time
20 Amps, 500,000 Operations
15 Amps, 1 Million Operations
10 Amps, 5 Million Operations
5 Amps, 5 Million Operations
Solid State Relay Drive(V0) .............. 24 VDC at 40mA
Solid State Relay (S0) ......................... 1A Triac, up to 240VAC
Solid State Relay (S1) ......................... 5A, up to 240VAC at 40°C
Solid State Relay (S2) ......................... 10A, up to 240VAC at 40°C
Alarm ........................................................... Form C, Relay 5 Amps at 120VAC,
2.5A at 240VAC
Sensor Input ................................................. Switch selectable J, K Thermocouple
or RTD
Operating Environment ........................... 0° to 65°C (32° to 150°F)
Enclosure Material .................................... High Temp ABS plastic rated for
0° to 175 °F
Front Panel .................................................... NEMA 4X construction
Influence of Line
Voltage Variation ....................................... +/-0.1% of sensor span per 10%
change in nominal line voltage
Noise Rejection
Common Mode Noise ............................ Less than 2°F with 230 VAC, 60 Hz applied
from sensor input to earth ground
Series Mode Noise .................................. Less than 2°F with 100mV, peak to
peak series mode noise
RFI ................................................................. Typically less than 0.5% of sensor span
at distance of 1 meter (3.1 feet) from a
transmitter of 4W at 464MHz
Sensor Leadwire Effect
J Thermocouple ....................................... +1°F for 1000 feet of 18 AWG
thermocouple extension wire
K Thermocouple ....................................... +2°F for 1000 feet of 18 AWG
thermocouple extension wire
RTD ............................................................... +/-0.1% of sensor span per 20Ω
balanced leadwire resistance
Termination Wiring
Power, Input,
Outputs (R1, VO, SO) ............................. #14-28 Stranded or Solid
Input Update Rate ..................................... Four samples per second
Outputs (S1,S2) ........................................ #10-24 Stranded or Solid
Readout Stability
J and K TC .................................................. +/-1°F per 10°F change in ambient temp.
RTD ............................................................... +/-0.5°F per 10°F change in ambient temp.
Outputs (R3) .............................................. Quick Connect: 0.25 in (6.25mm)
Input Specifications
Range °F
J TC ............................................................... -100 to 1400°F
K TC .............................................................. -300 to 2400°F
100Ω Pt RTD (a=.00385) ...................... -200 to 1000°F
®
Range °C
-73 to 760°C
-184 to 1316°C
-128 to 538°C
Accuracy at 77°F ambient
0.2% span +/- 1 LSD
0.2% span +/- 1 LSD
0.2% span +/- 1 LSD
• 1382 Heil Quaker Blvd. • LaVergne, TN 37086 • PH: 1-888-996-9258 • www.chromalox.com
3
http://www.chromalox.com
2110 Temperature Controller
Mounting Dimensions
Chromalox¤
0.5
(12.7)
Panel
Cutout
2110
Load
4.0
(101.6)
3.6
(92)
0.4
(10)
¡F
Alarm
¡C
Temp
3.55
(90)
Set Point
3.6
(92)
Set
Point
4.0
(101.6)
4.0
(102)
All dimensions in inches (mm)
3.6
(92)
* With alarm option or S2 output
Ordering Information
Model
2110
1/4 DIN Controller, with Selectable Thermocouple or RTD Inputs
Code
Control Output
R1
R3
V0
S0
S1
S2
Relay, 1 Amp Form A, 120/240 Vac
Relay, 20 Amps Form A, 120/240 Vac
Solid State Relay Drive, 24 Vdc @ 40ma
Solid State Relay, 1 Amp, up to 240 Vac
Solid State Relay, 5 Amps, up to 240 Vac, at 40°C
Solid State Relay, 10 Amps, up to 240 Vac, at 40°C
Code
Alarm Output (Kit Option)
0
1
No Alarm
Form “C” Relay, 5 Amps at 120 Vac, 2.5 Amps at 240 Vac
Code
0
2110
-
R3
1
Models
0
Add to Complete Part Number
0
Order Code
2110-R10000, 1Amp Relay
2110-R1100, 1Amp Relay, Alarm
2110-R3000, 20Amp Relay
2110-R3100, 20Amp Relay, Alarm
2110-V0000, SSR Drive
2110-V0100, SSR Drive, Alarm
2110-S0000, 1Amp SSR
2110-S0100, 1Amp SSR, Alarm
2110-S1000, 5Amp SSR
2110-S1100, 5AmpSSR, Alarm
2110-S2000 10Amp SSR
2110-S2100, 10Amp SSR, Alarm
®
317016
317075
317024
317083
317032
317091
317040
317104
317059
317112
317067
317120
Code
Power Supply
0
90-260 Vac
Typical Model Number
Spare Parts
0149-27147,
0149-27146,
0149-27149,
0149-27148,
0149-27150,
0149-27133,
0149-27132,
0149-27135,
0149-27134,
0149-27136,
0149-00022,
Order Code
R1 1Amp relay + Alarm
R3 20Amp relay + Alarm
V0 SSR Drive Out + Alarm
S1 1Amp triac + Alarm
S2 or S3 5, 10Amp SSR + Alarm
R1 1Amp relay
R3 20Amp relay
V0 SSR Drive Out
S1 1Amp triac
S2 or S3 5, 10Amp SSR
Fan Kit
317139
317147
317155
317163
317171
317180
317198
317200
317219
317227
317235
• 1382 Heil Quaker Blvd. • LaVergne, TN 37086 • PH: 1-888-996-9258 • www.chromalox.com
PDS 2110
April 01
0037-75408
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement