Kawasaki ZX-6R FE Kit (2009)
Installation Instructions
1. Install TBR fender eliminator kit using the original bolts
and supplied nuts, the nuts will be inside the bike under
seat.
V.A.L.E.
TM
2009 Kawasaki
V a r i a b l e
A x i s
L o c k i n g
E x h a u s t
ZX-6R
2. Attach turn signals and plate light bolts using the wire
splice connectors supplied to the correct wires in the
harness as shown in the Wiring Diagram.
3. Re-install seats and covers.
4. Double check all your work.
Fender Eliminator Kit
Part # 013-241
5. Before you run the bike, clean off all fingerprints and
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Also,
remove any plastic film from the name badge(s) and or
canister clamp(s). Run the bike and enjoy. It is normal
for some white smoke to appear the first time you start
the bike. This is packing/manufacturing oil from inside
the pipe burning off. Check for gaps or leaks. If you find a
leak, a little high temperature silicon sealant should fix it.
After 50 to 100 miles, recheck all fasteners for tightness.
WIRING DIAGRAM
Wiring Harness
Parts List
Part Number
1
2
1
6
1
1
4
1
Fender Bracket
Lighted License Plate Bolt
Turn Signals (set of 2)
Butt Splice Connectors
Zip Tie
Zip Tie Tab
6mm Flange Nut
TBR Sticker Kit
005-19904B
005-8504LTZ
005-88T2
005-BS1614
005-ZT458B
005-ZTM4
005-FN6
015-10212
l
nar)
g
i
S o
t
rn nnec
u
T
ft co
Le rey
(G
ck
Bla
Red
ck
Bla
Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the
use of these products or parts.
d
Re
Warranty
Rig
(Bl ht T
ack ur
co n S
nn ign
ec
to al
Plate Lights
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions first
before starting installation. Make sure the motorcycle and exhaust system are
completely cool before starting the installation. Also, make sure the bike is secure
on a centerstand or ideally a service lift during installation. Be sure to save all stock
components for possible use later.
Red
Description
Black/Yellow
Qty.
r)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement