Celair basic manual thermostat Basic Manual
Below you will find brief information for thermostat basic manual. This manual provides instructions on how to view fault codes and reset the unit. It also includes a description of the fault code log and how to access it using the buttons on the thermostat. The manual provides information on how to troubleshoot common problems and reset the unit.
Advertisement
Advertisement
Advertisement
Key features
- View fault codes
- Access fault log
- Reset unit
- Troubleshooting
- Easy to use
- Clear instructions
- Comprehensive guide
- Simple to navigate
- Step-by-step instructions
Frequently asked questions
When a product fails and generates a fault code, the manual control will flash ERR and indicate the fault code using the screen display. The fault errors will only be displayed for the unit currently operating. To view the log for previous faults, use the up or down buttons to display. To exit and reset the unit, turn the control OFF then ON.
To view the fault code log on a basic manual thermostat use the following steps: Turn the control ON and select the product to check. Press the MODE button and the DOWN button together until the screen display changes. To view the fault code log use the up down buttons. To exit the fault code mode and reset the unit, press OFF. Turn ON to restart the unit.
When requesting a service call for a failed unit, please note these fault codes and advise them to the call centre operator. This will assist our service technicians to carry the correct components for the service call.