User manual | Controlling the rest of your system

10
Controlling the rest of your system
Chapter 10:
Controlling the rest of your
system
Setting the remote to control
other components
There are several ways to set your remote to
control the other components in your system.
The easiest way to do this is to assign the
component’s manufacturer preset code
(starting on page 67) to one of the MULTI
CONTROL buttons on the remote control.
Selecting preset codes
directly
MULTI CONTROL
DVD/LD
TV / SAT
VCR/DVR
TV CONT
CD
CD-R/TAPE
TUNER
RECEIVER
The buttons can be set to control the following
components:
Button
Controllable Components
DVD/LD:
TV/SAT:
VCR/DVR:
CD:
CD-R/TAPE:
DVD or LD player
TV or Satellite tuner
VCR or Digital Video Recorder
CD player
CD Recorder, Tape deck
or MD player
TV or Cable TV tuner
FM/AM tuner
TV CONT:
TUNER:
MASTER
VOLUME
TUNE
ST
ST
ENTER
TUNE
If you can’t find a preset code that matches
the component you want to control, you can
still teach the remote individual commands
from another remote control (page 61).
• The remote control will exit an operation
after 1 minute of inactivity.
60
En
1 While pressing the RECEIVER button,
press and hold the 1 button.
The LED blinks.
2 Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
10
Controlling the rest of your system
nent (for example , , or other operation
buttons). This can also be used to program
additional operations (buttons not covered in
the presets) after assigning a preset code.
The LED blinks again after you enter the code.
1 While pressing the RECEIVER button,
press and hold the 2 button.
The LED blinks.
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
• You may not be able to use a particular
code even if it is listed on page 67.
• The remote control buttons will not be
able operate other equipment unless
preset with the method above.
5
When you’re done, press RECEIVER.
VSX-D812/D912 only
If the preset code for your component is not
available, or the available preset codes do not
operate correctly, you can program signals
from the remote control of another compo-
4 Press the corresponding button on the
other remote control that is sending
(teaching) the signal to this receiver’s
remote control.
If the operation has been learned successfully, the LED on this receiver’s remote will
blink once then light steadily.
If for some reason the operation hasn’t been
learned the LED will blink for three seconds
and then light steadily. If this happens, keep
pressing the (teaching) button as you vary the
distance between the two remotes, until you
see the the LED light steadily.
If there is not enough memory for this button
to be learned by the remote, the LED will blink
twice and the operation will be canceled.
5 To program additional signals for the
current component repeat steps 3 and 4.
To program operations for another component exit and repeat steps 1 through 5.
Español
Programming signals from
other remote controls
2 – 5 cm
Nederlands
4 Repeat steps 2 through 3 to try a
different code, or to enter a code for
another component you want to control.
3 Point the two remote controls
towards each other about 2–5 cm apart
then press the button that will be doing
the learning on this receiver’s remote
control.
The LED blinks rapidly.
Deutsch
• Even if you don’t input a preset code for
the TV (TV/SAT MULTI CONTROL button)
you will be able to control your TV using
the dedicated TV CONTROL on the
remote if you have assigned it to the TV
CONT button.
• To exit or cancel press RECEIVER.
Français
• You can only input a code for the component type written on each MULTI
CONTROL button (except RECEIVER and
TUNER).
2 Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
Italiano
If the correct code has been input the power
of the component being input will turn on or
off.
English
3 Use the number buttons to enter the
preset code.
You can find the preset codes on page 67
(VSX-D712) and page 68 (VSX-D812/912).
61
En
10
Controlling the rest of your system
6 When you’re done, press RECEIVER to
store the operation(s).
• Some commands from other remote
controls cannot be learned, but in most
cases the remotes just need to be moved
closer together or farther apart.
• Certain buttons represent operations that
cannot be learned from other remote
controls. These include: RECEIVER ,the
MULTI CONTROL buttons, RECEIVER
CONTROL and MASTER VOLUME
buttons.
Erasing all of your
programmed settings
VSX-D812/D912 only
This erases all of the buttons you have
programmed (in Programming signals from
other remote controls, above) and restores the
button to the factory default.
You can use the direct function feature to
control one component using the remote
control while at the same time, using your
receiver to playback a different component.
This could let you, for example, use the
remote control to set up and listen to a CD on
the receiver and then use the remote control
to rewind a tape in your VCR while you
continue to listen to your CD player.
When direct function is on, any component
you select (using the MULTI CONTROL
buttons ) will be selected by both the receiver
and the remote control. When you turn direct
function off, you can operate the remote
control without affecting the receiver.
1 While pressing the RECEIVER button,
press and hold the 4 button.
The LED blinks.
2 Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
3 Use the number buttons to enter
either 1 (direct on) or 2 (direct off).
The LED blinks again.
Clearing all the remote
control settings
5
• While pressing the RECEIVER button,
press and hold the 0 button for three
seconds.
The LED blinks three times indicating the
settings have been restored to the factory
presets.
En
• Default setting: ON
• While pressing the RECEIVER button,
press and hold the 9 button for three
seconds.
The LED blinks steadily for three seconds and
then goes off.
You can clear all presets and restore the
factory default settings.
62
Direct function
4 Repeat steps 2 through 3 for the other
components you want to control.
When you’re done, press RECEIVER.
• You can’t use direct function for TUNER.
10
Controlling the rest of your system
This remote control can control components after entering the proper codes or teaching the
receiver the commands (see Setting the remote to control other components on page 60 for more
on this). Use the MULTI CONTROL buttons to select the component.
Components
TV
Switches the DTV on or off.
DTV
Switches the TV or CATV between standby and on.
Cable TV/Satellite TV/TV
INPUT
SELECT
Switches the TV input. (Not possible with all models.)
TV
CHANNEL
+/–
Selects channels.
Cable TV/Satellite TV/TV/
DTV
VOLUME
+/–
Adjust the TV volume.
Cable TV/Satellite TV/TV/
DTV
TOP MENU Use as the TEXT ON button.
TV
Cable TV/Satellite TV/TV
AUDIO
Use as the AUDIO button.
Cable TV/Satellite TV/TV/
DTV
GUIDE
Use as the GUIDE button for navigating.
Cable TV/Satellite TV/DTV
Use as the TEXT OFF button.
TV
Use to choose the BLUE commands on a DTV menu.
DTV
B/RED
Satellite TV/TV
Use to choose the GREEN commands on a DTV menu.
DTV
C/GREEN
Satellite TV/TV
Use to choose the RED commands on a DTV menu.
DTV
D/YELLOW
Satellite TV/TV
Use to choose the YELLOW commands on a DTV menu. DTV
E/CYAN
Satellite TV/TV
Press to get information on DTV programs.
DTV
A
Satellite TV/TV
Español
Select the menu screen.
Nederlands
DTV
Deutsch
Select different menus from the DTV functions.
MENU
Français
Function
Italiano
Button(s)
English
Controls for TVs
63
En
10
Controlling the rest of your system
Button(s)
Function
Components
Switches DTV on or off.
DTV
Use to select closed captioning with DTV.
DTV
Number
Buttons
Use to select a specific TV channel.
Cable TV/Satellite TV/TV/
DTV
+10 button Use to add a decimal point when selecting a specific TV DTV
channel.
ENTER/
DISC
Use to enter a channel.
Cable TV/Satellite TV/TV/
DTV
& Select or adjust and navigate items on the menu screen. DTV
ENTER
ENTER brings up the DTV menus.
Press to select or adjust and navigate items on the menu Cable TV/Satellite TV/TV/
DTV
screen.
• The four TV CONTROL buttons on the remote control are dedicated to control the TV
assigned to the TV CONT button. Thus if you only have one TV to hook up to this system
assign it to the TV CONT MULTI CONTROL button. If you have two TVs, assign the main TV
to the TV CONT button.
Controls for other components
This remote control can control these components after entering the proper codes or teaching
the receiver the commands (see Setting the remote to control other components on page 60 for
more on this). Use the MULTI CONTROL buttons to select the component.
Button (s)
Function
Components
SOURCE Press to switch the component between standby and on. CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
64
En
Press to return to the start of the current track.
Repeated presses skips to the start of previous tracks.
CD/MD/CD-R/DVD/LD
player
Play the reverse side of the tape on a reversible deck.
Cassette deck
Press to advance to the start of the next track.
Repeated presses skips to the start of following tracks.
CD/MD/CD-R/DVD/LD
player
Play the forward side of the tape on a reversible deck.
Cassette deck
10
Controlling the rest of your system
Pause playback or recording.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Start playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Hold down for fast forward playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Hold down for fast reverse playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Stops playback (on some models, pressing this when the CD/MD/CD-R/VCR/DVD/LD/
disc is already stopped will cause the disc tray to open). DVR player/Cassette deck
Number
buttons
Directly access tracks on a program source.
CD/MD/CD-R/VCR/LD
player
Use the number buttons to navigate the on-screen
display.
DVD/DVR player
+10 button Selects tracks higher than 10. (For example, press +10
then 3 to select track 13.)
CD/MD/CD-R/VCR/LD
player
DVD
Chooses the disc.
Multiple CD player
Use as the ENTER button.
VCR
Displays the setup screen for DVR players.
DVR player
Changes sides of the LD.
LD player
Displays menus concerning the current DVD or DVR you DVD/DVR player
are using.
Pauses the tape.
Cassette deck
Stops the tape.
Cassette deck
ENTER
Starts playback.
Cassette deck
/
Fast rewinds/fast forwards the tape.
Cassette deck
& Navigates DVD menu/options.
ENTER
DVD/DVR Player
Selects channels.
VCR/DVR Player
CHANNEL
+/–
Español
MENU
Nederlands
Changes the search mode.
Deutsch
ENTER/
DISC
Français
Components
Italiano
Function
English
Button (s)
65
En
10
Controlling the rest of your system
Button (s)
Function
TOP MENU Displays the disc ‘top’ menu of a DVD.
66
En
Components
DVD/DVR Player
AUDIO
Changes the audio language or channel.
DVD/DVR Player
GUIDE
Displays/changes the subtitles on multilingual DVDs.
DVD/DVR Player
10
Controlling the rest of your system
You should have no problem controlling a component if you find the manufacturer in this list,
but please note that there are cases where codes for the manufacturer in the list will not work
for the model that you are using. There are also cases where only certain functions may be
controllable after assigning the proper preset code.
DVD
Manufacturer Code
SONY 101, 102
HITACHI 109
DENON 110
PHILIPS 104
PIONEER 100,111(DVD/
LD)
TV
RCA 618
PHILIPS 607,656
GRUNDIG 631, 653
NOKIA 632, 652
FISHER 635, 638
THOMSON 636
TELEFUNKEN 637
ALBA 639
TANDY 641
ITT 642
DVD Recorder
Manufacturer Code
Manufacturer Code
JERROLD 716
S.ATLANTA 706, 708
ZENITH 717
PIONEER 700
On digital STB
ManufacturerCode
PIONEER 200, 204
TUNER
Manufacturer Code
PIONEER 500
VCR
Manufacturer Code
AKAI 442
MATSU 445
AIWA 446
PIONEER 456
TAPE
Manufacturer Code
PANASONIC 803
LUXMAN 815
NAKAMICHI 816
SHERWOOD 818
TAND BERG 820
PHILIPS 821
SANSUI 824
THOSHIBA 826, 828
AKAI 829
DENON 810, 827
FISHER 813
JVC 802
KENWOOD 804, 807
ONKYO 817, 819
SONY 814, 823
Manufacturer Code
GOLDSTAR 330
PANASONIC 304
BUSH 332
HITACHI 334
AKAI 335
ASUKA 337
FISHER 340
LUXMAN 341
SHARP 343
ROADSTAR 344
DENON 309
JVC 331
KENWOOD 310, 311
ONKYO 342
PHILIPS 322, 336
RCA 319
SONY 316, 329
TECHNICS 333
YAMAHA 338, 339
PIONEER 300
MD
Manufacturer Code
SONY 901
KENWOOD 903
SHARP 902
TEAC 904
ONKYO 905
DENON 906
PIONEER 900, 907(DAT)
Español
Manufacturer Code
STB (SATELLITE/CATV)
CD
Nederlands
Manufacturer Code
YAMAHA 811, 822
PIONEER 800, 825
Deutsch
LD
ALBA 447, 452
BUSH 448
THOMSON 449
BAIRD 450
TELEFUNKEN 451
GRUNDIG 453, 454, 455
MAGNAVOX 414
PANASONIC 408 , 432 ,
TOSHIBA 405
JVC 407, 428
HITACHI 406
SONY 416, 417, 457, 458,
459(Digital Video)
MITSUBISHI 409, 424
SANYO 444
SHARP 402
GOLDSTAR 411
GRADIENTE 441
PIONEER 400, 443
Français
TOSHIBA 001
SONY 002
PANASONIC 003
JVC 004
SAMSUNG 005
SHARP 006
AKAI 007
RCA 009, 011
DENON 010
HITACHI 012(DVD/CD/
CD-R)
PHILIPS 013
ZENITH 014
THOMSON 015
SONY 016 (video game)
PIONEER 000, 008
SALORA 643
SAMSUNG 644, 646
BUSH 647
FUJITSU 648
SEI 649
FINLUX 655
SONY 604
PANASONIC 608, 622
TOSHIBA 605
SHARP 602
HITACHI 606, 633, 634,
654
SANYO 645,
MITSUBISHI 609
GOLDSTAR 650
JVC 613
FUNAI 640
GRANDIENTE 657
PIONEER 600, 651, 231
Italiano
• The TV CONT button will only accept preset codes for TV, STB and DTV.
English
Preset Code List (VSX-D712 only)
CD-R
Manufacturer Code
PHILIPS 346
PIONEER 345
67
En
10
Controlling the rest of your system
Preset Code List (VSX-D812/D912)
You should have no problem controlling a component if you find the manufacturer in this list,
but please note that there are cases where codes for the manufacturer in the list will not work
for the model that you are using. There are also cases where only certain functions may be
controllable after assigning the proper preset code.
• The TV CONT button will only accept preset codes for TV, STB and DTV.
DVD
Manufacturer Code
TOSHIBA 1010
SONY 1009
SAMSUNG 1008
JVC 1005
RCA 1007
DENON 1004
PHILIPS 1006
TOSHIBA 1010
YAMAHA 1011, 1012
PIONEER 1001, 1002 , 1003
LD
Manufacturer Code
SONY 2008
PHILIPS 2006, 2007
PANASONIC 2005
KENWOOD 2004
DENON 2003
YAMAHA 2009
PIONEER 2001, 2002
TV
Manufacturer Code
PIONEER 5001,5002, 5003,
5004, 5005, 5006, 5007,
5008, 5009, 5010
ADMIRAL 5011, 5012.
5013
AIWA 5014, 5015
AKAI 5016
ALBA 5017
AOC 5018
BESTAR 5019
BLAUPUNKT 5020
BLUE SKY 5021
BRANDT 5022
BROCSONIC 5023
BUSH 5024
68
En
CLATRONIC 5025
CRAIG 5026, 5027, 5028,
5029
CROSLEX 5030
CURTIS MATHIS
5031,5032, 5033
DAEWOO 5034, 5035,
5036, 5037, 5038, 5039
DAYTRON 5040
DUAL 5041
EMERSON 5042,
5043,5044,5045, 5046,
5047, 5048
FERGUSON 5049, 5050
FIRST 5051
FISHER 5052
FUJITSU 5053
FUNAI 5054, 5055, 5056
GE 5057, 5058, 5059, 5060
GOLDSTAR 5061, 5062,
5063, 5064
GOODMANS 5065, 5066
HITACHI 5067, 5068, 5069,
5070, 5071
ICE 5072
IRRADIO 5073
ITT/NOKIA 5074,5075
JC PENNY 5076, 5077,
5078, 5079
JVC 5080, 5081
KENDO 5082
KTV 5083, 5084
LOEWE 5085
LXI 5086, 5087, 5088, 5089,
5090
MAGNAVOX 5091
MARK 5092
MATSUI 5093, 5094
MATSUSHITA 5095, 5096
MEDION 5097
MITSUBISHI 5098, 5099
MIVAR 5100
NEC 5101, 5102
NOKIA OCEANIC 5103
NORDMENDE 5104,5105
OKANO 5106
ONWA 5107
PANASONIC 5108, 5109,
5110, 5111
PHILCO 5112, 5113, 5114
PHONOLA 5115
PORTLAND 5116, 5117
PROSCAN 5118
QUASAR 5119, 5120
RADIO 5121, 5122
RADIOSHACK 5123,5124,
5125
RADIOLA 5126
RCA/PROSCAN 5127,
5128, 5129
SABA 5130
SAMSUNG 5131, 5132
SANYO 5133, 5134, 5135
SCHNEIDER 5136
SCOTT 5137, 5138
SHARP 5139, 5140
SIEMENS 5141
SIGNATURE 5142, 5143
SONY 5144, 5145
SYLVANIA 5146, 5147
SYMPHONIC 5148
TATUNG 5149
TELEFUNKEN 5150, 5151
THORN 5152
TOSHIBA 5153, 5154
UNIVERSUM 5155
VIDECH 5156, 5157
W. WHOUSE 5158
WARDS 5159, 5160, 5161
WATSON 5162
ZENITH 5163, 5164
VCR
Manufacturer Code
PIONEER 3001, 3002,
3003, 3004, 3005
ADMIRAL 3006
AIWA 3007, 3008, 3009
AKAI 3010, 3011
ALBA 3012
AUDIO DYNAMIC 3013,
3014
BELL&HOWELL 3015
BLAUPUNKT 3016, 3017
BROCSONIC 3018, 3019
BUSH 3020
CANON 3021
CGM 3022, 3023
CITIZEN 3024
CLATRONIC 3025
CRAIG 3026
CURTIS MATHIS 3027,
3028, 3029
DAEWOO3030, 3031,
3032
DBX 3033, 3034
DIMENSIA 3035
EMERSON 3036,
3037,3038, 3039, 3040,
3041
FERGUSON 3042
FISHER 3043, 3044, 3045,
3046
FUNAI 3047, 3048
GE 3049, 3050, 3051
GOLDSTAR 3052
GOODMANS 3053, 3054
GRUNDIG 3055
HITACHI 3056, 3057, 3058,
3059, 3060
INSTANT REPLAY 3061,
3062
ITT/NOKIA 3063
10
Controlling the rest of your system
PIONEER 7001, 7002
DENON 7003, 7004, 7005
FISHER 7006, 7007
JVC 7008, 7009, 7010,
7011
KENWOOD 7012, 7013,
7014, 7015, 7016
MAGNAVOX 7017, 7018
MARANTZ 7019
ONKYO 7020, 7021
PANASONIC 7022, 7023
PHILIPS 7024, 7025
RCA 7026, 7027
SANYO 7028
SHARP 7029
SONY 7030
TEAC 7031, 7032, 7033
Manufacturer Code
PIONEER 4001
MD
Manufacturer Code
PIONEER 8001, 8002, 8003
DENON 8004
JVC 8005
KENWOOD 8006
SONY 8007
YAMAHA 8008, 8009
TAPE
Manufacturer Code
PIONEER 9001, 9002
DENON 9003, 9004
FISHER 9005, 9006
JVC 9007, 9008
KENWOOD 9009, 9010,
9011
NAKAMICHI 9012
ONKYO 9013, 9014, 9015
PHILIPS 9016, 9017
SONY 9018, 9019
TEAC 9020, 9021
TECHNICS 9022
YAMAHA 9023, 9024,
9025 , 9026
Nederlands
PIONEER 6001, 6002,
6003, 6004, 6005, 6006
BELL 6049
BLAUPUNKT 6007
ECHOSTAR 6047
GENERAL INSTRUMENT
6008
GOLDSTAR 6009
GRUNDIG 6010, 6011
HAMLIN 6012, 6013
Manufacturer Code
DVR
Deutsch
Manufacturer Code
CD/CD-R
TECHNICS 7034, 7035
YAMAHA 7036, 7037,
7038, 7039
DENON 7040, 7041
JVC 7042
KENWOOD 7043
PHILIPS 7044
SONY 7045
Français
STB
HNS/HUGHES 6014
HITACHI 6015
ITT/NOKIA 6016
JERROLD 6017, 6018,
6019, 6020, 6021
NEC 6022, 6023
OAK 6024, 6025, 6026
PANASONIC 6027, 6028,
6029
PHILIPS 6030, 6031
PRIMESTAR 6048
RADIO SHACK 6032
RCA 6033
SAMSUNG 6034, 6035
SCIENTIFIC ATLANTA
6036 , 6037, 6038
SIEMENS 6039, 6040
SONY 6041
TOSHIBA 6042, 6043
TOCOM 6044
ZENITH 6045, 6046
Italiano
SCOTT 3141, 3142, 3143,
3144, 3145, 3146, 3147
SEG 3148
SELECO 3149
SHARP 3150, 3151, 3152
SIEMENS 3153, 3154, 3155
SIGNATURE 3156, 3157
SONY 3158, 3159, 3160,
3161, 3162, 3163
SYLVANIA 3164, 3165,
3166, 3167
SYMPHONIC 3168
TANDBERG 3169
TASHIRO 3170
TATUNG 3171, 3172
TEAC 3173, 3174, 3175
TECHNICS 3176, 3177
TELEFUNKEN 3178, 3179
THORN 3180, 3181
TOSHIBA 3182, 3183, 3184
UNIVERSUM 3185, 3186,
3187
W. WHOUSE 3188
WARDS 3189, 3190, 3191,
3192, 3193
YAMAHA 3194, 3195,
3196
ZENITH 3197
English
JC PENNY 3064, 3065,
3066, 3067, 3068, 3069
JVC 3070, 3071, 3072
KENDO 3073
KENWOOD 3074, 3075,
3076
LOEWE 3077, 3078
LUXOR 3079
LXI 3080, 3081, 3082,
3083, 3084, 3085 , 3086
MARANTZ 3087, 3088
MARTA 3089
MATSUI 3090
MEMOREX 3091, 3092
MINOLTA 3093, 3094
MITSUBISHI 3095, 3096,
3097,3098, 3099
MULTITECH 3100, 3101,
3102
NEC 3103
NOKIA OCEANIC 3104
NOKIA 3105, 3106
NORDMENDE 3107
OKANO 3108
OLYMPIC 3109, 3110
ORION 3111
PANASONIC 3112, 3113,
3114, 3115, 3116, 3117
PENTAX 3118, 3119
PHILCO 3120, 3121
PHILIPS 3122
PHONOLA 3123
QUASAR 3124, 3125
RCA/PROSCAN 3126
REALISTIC 3127, 3128,
3129, 3130, 3131, 3132
SABA 3133
SAMSUNG 3134, 3135
SANSUI 3136
SANYO 3137, 3138
SCHNEIDER 3139, 3140
Español
69
En

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project