CS7000 Control Station Datasheet

CS7000 Control Station Datasheet
CS7000 Control Station
The CS7000 is a compact, state-of-the-art control station
that provides

Dual-band half-duplex operation with an XG-75M

Single-band half-duplex operation with an M5300

700/800 MHz, VHF 50W, UHF-L, and UHF-H
frequencies with an XG-75M; and 800 and 900
MHz frequencies with an M5300
Multiple Operating Modes
The CS7000 supports multiple operat®
ing modes, including OpenSky digital
operation, Enhanced Digital Access
Communication System (EDACS®) or
ProVoiceTM trunked modes, P25 digital
trunked mode, P25 digital conventional
mode, and conventional analog mode.
Project 25 Interoperability
The CS7000 provides Project 25 digital
conventional or trunked capabilities for
interoperability with other critical communications users.
Over-the-Air Programming
Harris radios benefit from a flexible,
software-based, digital radio design.
Features and user profiles are softwaredefined and can be reprogrammed over
the air. The over-the-air programming
feature allows communications protocols to be changed easily and added at
any time.
User Interfaces
The CS7000 provides a Controller Area
Network (CAN) interface that supports
multiple control heads or SP721 controllers (see reverse side of page). This
capability allows users to operate either
a single dispatch group with multiple
users or a dispatch center with multiple
groups, all on a first-come, first-served
basis. Alternatively, the CS7000 can be
configured to support tone remote
equipment connected via the optional
remote interface module.
The CS7000 can interface with the
SP721 Desktop Controller. The SP721
is a fully digital remote controller that
uses the industry standard CAN interface. The SP721 provides the same
user interface as the CH-721 Control
Unit.
The mobiles for the CS7000 provide a fixed audio level to the remote
interface that is not affected by the front
volume control.
External Connections
The CS7000 contains an internal power
supply and requires connections only to
an external N-type antenna, AC power,
and a user interface. The CS7000 also
includes the CAN interface which, along
with the TIA/EIA-232 serial interface,
allows for simple reconfiguration and
peripheral support of optional equipment such as the control head or IP
remote equipment.
OpenSky leverages the power of IP and
packet technology for reliability and
scalability to bring open data applications to the user. OpenSky uses a
19.2-kbps physical bit rate 4-slot Time
Division Multiple Access (TDMA) airlink
to achieve 6.25-kHz voice channel
spectral efficiency and dynamic bandwidth allocation.
EDACS Software-Based Features
Based on Digital Signal Processor
(DSP) architecture, the feature set of
the M5300/XG-75M is extensive and
easily expandable through software
upgrades to meet the specific requirements of users.

The standard M5300/XG-75M
incorporates the critical communications features Emergency and
Dynamic Regroup to deliver
advanced performance.

Trunked systems/groups may be
configured for up to 1,024 different
combinations and up to 1,024 conventional channels.

ProFile™ offers easy over-the-air
programming for efficient updates
of radios.

ProScan™ provides the user
smooth, automatic roaming
between sites.

The M5300/XG-75M includes
conventional operation.
Secure Communications
Optional password protection and
Advanced Encryption Standard (AES)
are available for maximum security.
Harris radios operate the most
advanced vocoder on a private wireless
Intranet that provides maximum voice
channel capacity.
OpenSky Operation
OpenSky is a secure integrated digital
voice and data communication system.
Technical specifications are subject to change without notice. Product sales are subject to applicable U.S. export control laws.
General Specifications
Dimensions (H x W x D):
Desktop (excludes rubber feet):
3.5 x 17 x 13.1 in.
(8.9 x 43.2 x 33.3 cm)
Rack Mount:
3.5 x 17 x 13.1 in.
(8.9 x 43.2 x 33.3 cm)
Weight:
Without Transceiver:
With Transceiver:
18 lb (8.2 kg)
24 lb (11 kg)
Operating Temperature Range:
Local Control Unit
@ 50% duty cycle:
@ 20% duty cycle:
Local Remote Unit
@ 50% duty cycle:
@ 20% duty cycle:
-22 to +104°F (-30 to +40°C)
-22 to +140°F (-30 to +60°C)
+32 to +104°F (0 to +40°C)
+32 to +140°F (0 to +60°C)
Storage Temperature Range:
-40 to +140°F (-40 to +60°C)
System Voltage:
110-120 VAC, 50/60 Hz
220-240 VAC, 50/60 Hz
Maximum Current:
4.0 Amps
Mounting:
19-inch rack mount
Programming:
Over-the-Air Programming
Direct Connect TIA/EIA-232 Serial Programming
Safety Approvals:
UL 60950-1, CSA 22.2
Please refer to the appropriate XG-75M or M5300 Mobile data sheet for additional specifications.
Controller Support
Configuration
OpenSky Operation with CS7000 Local Remote Unit
P25/EDACS/Analog Operation with CS7000 Local Remote Unit
P25/EDACS/Analog Operation with CS7000 Local Remote Unit
Supported Controllers
Up to four SP721 or CH721
Up to two SP721 or CH721 in Dual Mode
Up to five SP721 or CH721 in Parallel Mode
Options and Accessories
- Tone Remote Interface Module for connectivity to third-party tone
- Advanced Encryption Standard (AES)
- 7 dBd (9 dBi) Directional Antenna (N-type Connector)
Public Safety and Professional Communications | www.pspc.harris.com
221 Jefferson Ridge Parkway | Lynchburg, VA USA 24501 | 1-800-368-3277 (+1-434-455-6403)
Harris, assuredcommunications, OpenSky, and EDACS are registered trademarks of Harris Corporation.
ProVoice, ProFile, and ProScan are trademarks of Harris Corporation. Trademarks and tradenames are the property of their respective companies.
Copyright  2015 Harris Corporation. All rights reserved.
Printed in U.S.A. 02/15 ECR-7536K
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement