PZS23KPE GE Profile Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator H

PZS23KPE GE Profile Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator H
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator
AIR
CLEARANCES
OVERALL
DIMENSIONS
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Height to top of hinge (in.) A
69-1/4
Height to top of case (in.) B
68-3/4
Case depth without door (in.) C
23-7/8
Case depth less door handle (in.) D
27-1/8
Case depth with door handle (in.) E
28-3/4
Depth with fresh food door open 90˚ (in.) F
H
G
46
Width (in.) G
35-3/4
Width with door open 90˚ with door handle (in.) H
40-1/8
C
A B
D
E
1/8
Each side (in.)
Top (in.)
1
Back (in.)
2
F
*Height to top of door trim (in.): 70-1/4
†Water hook-up fits in back air clearance when calculating
installation depth.
If installed against a wall, allow clearance of 13-15/16" on
freezer side to remove bin.
OVERALL
DIMENSIONS
Clearance required to remove fresh food full-size pan without
disassembling is 18-5/8".
Allow additional space for any necessary leveling adjustments.
Height to top of hinge (in.) A
69-1/4
Height to top of case (in.) B
68-3/4
Case depth without door (in.) C
23-7/8
Case depth less door handle (in.) D
27-1/8
Case depth with door handle (in.) E
28-3/4
Depth with fresh food door open 90˚ (in.) F
Width (in.) G
AIR
CLEARANCES
Width with door open 90˚ with door handle (in.) H
Each side (in.)
For answers to your Monogram, GE Café Series,
Top (in.)
GE Profile™ Series or GE Appliances product questions,
visit our website at geappliances.com or call GE Answer
Back (in.)
Center® Service, 800.626.2000.
™
46
35-3/4
40-1/8
Listed by
Underwriters
1/8
Laboratories
1
2
Specification Revised 12/15
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator
FOR 21 CUBIC FOOT MODELS
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
INSTALLATION TIPS TO MAXIMIZE THE BUILT-IN LOOK
- All wall/floor molding should be removed prior to installation.
Electrical
- When possible, recess both copper water line and electrical
outlet. (See local codes)
8' Ceiling
Electrical
Water
Water
12"
Soffit
- Water recess on rear wall recommended to prevent water
line damage. 48" minimum length, 1/4" diameter water
line tubing recommended.
24"
Cabinet
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
25"
Counter
Top
- Front and rear leveling legs are adjustable for the built-in look.
(See owner’s manual)
3/4" Airspace
(1/2" Gap + 1/4"
13" to 14"
Wall Plates)
Cabinet 25"
Counter
Top
24"
Cabinet
- If optional collar trim kit is to be used or anticipated, see collar
trim installation for different rough-in dimensions
Trim
*The rough-in dimensions of 70" for 23 cu. ft. models and 72-1/2" for 25 cu. ft. models
are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets
are planned for above the refrigerator, you may need to consider adding a maximum
of 1/4" (70-1/4") to height of opening for 23 cu. ft. models and 1/8" (72-5/8") for 25
cu. ft. models to allow for additional clearance between the cabinet doors and the
top of refrigerator trim when the cabinet doors are in open position.
70"*
23 cu. ft. models
72-1/2"*
25 cu. ft. models
FOR 24 CUBIC FOOT MODELS
24-1/2"
36-1/8"
Water
24"
Cabinet
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
For answers to your Monogram, GE Café™ Series,
GE Profile™ Series or GE Appliances product questions,
visit our website at geappliances.com or call GE Answer
Center® Service, 800.626.2000.
Water
Electrical
Electrical
*The rough-in dimensions of 70" for 23 cu. ft. models and 72-1/2" for 25 cu. ft.
models are minimum and measured from the finished floor to top of opening
(or the underside of the overhead cabinets). For Models with Trim Kit:
If frameless style cabinets are planned for above the refridgerator, you may
3/4" Airspace
need to consider adding a maximum of 1/4" (70-1/4")
height
of opening
(1/2" to
Gap
+ 1/4"
for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. Wall
ft. models
to allow additional
Plates)
clearance between24"
cabinet doors and top of refridgerator trim when cabinet 25"
25"
Cabinet
doors are in open position.
Counter
Counter
Listed by
†Model PSDW3YGX is 71-3/4".
Top
Top
Underwriters
Laboratories
Specification Revised 12/15
Trim
Collar Trim In. w/ceiling
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator
ROUGH-IN DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
COLLAR TRIM INSTALLATION
An enclosure is required to match up
to the trim, see Typical Installation.
To obtain the most integrated look, the
cabinet or soffit above the refrigerator
should extend out to the same depth as
the side panels. The refrigerator opening
must have minimum dimensions of 70"
high x 36-1/8" wide x 24-1/2" deep as
shown at right. If there is an overhead
cabinet, allow 1" for cabinet door
clearance with the top trim piece so the
cabinet doors can be opened without
hitting the top trim. If 1/2" side panels
are used, then side trim and panel will be
even. If 3/4" side panels are used, then
some of the side panel will extend beyond
the trim and must be finished.
IMPORTANT: Before finalizing
specifications for your GE Profile
Counter-Depth Refrigerator,
please NOTE:
- A minimum of 36-1/8" is required for
refrigerator installation
with collar
- Be sure to allow for 1/2" or 3/4" side
panels in addition to the 36-1/8"
minimum.
1/2" minimum
70"*
Refrigerator
Case
3/4" Cabinet
Side Panel
1/2" Cabinet
Side Panel
Cabinet
Door
1"
Magnetic
Tape
Door Gasket
Overhead
Cabinet
Case
Refer collar trim install
Side Trim
Side trim must be installed
flush with the gasket contact
surface on the case.
24-1/2"*
36-1/8"
Top Trim
Typical Installation
Shaded areas represent front surfaces of side panels
and overhead cabinet or soffit that contacts trim.
For answers to your Monogram, GE Café™ Series,
GE Profile™ Series or GE Appliances product questions,
visit our website at geappliances.com or call GE Answer
Center® Service, 800.626.2000.
*The rough-in dimension of 70" is minimum and is measured from the
finished floor to top of opening (or the underside of the overhead cabinets).
For Models with Trim Kit: If frameless style cabinets are planned for above the
refrigerator, you may need to consider adding a maximum of 1/4" (70-1/4") to
height of opening to allow additional clearance between cabinet doors and
top of refrigerator trim when cabinet doors are in open position.
Listed by
Underwriters
Laboratories
Specification Revised 12/15
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
ORDER YOUR OWN CUSTOM WOOD PANELS TO
MATCH CABINETRY OR OTHER DECOR.
Panels up to 1/4" thick will fit door frame with no special
preparation. Add filler behind material thinner than 1/4"
for proper fit.
WEIGHT LIMITS: Total weight of panels (i.e., both
freezer panels)—Fresh Food = 38 lbs., Freezer = 28 lbs.
FREEZER PANEL
WITHOUT
Freezer Panel
DISPENSER
Without Dispenser
Cut
out
1/8
INSTALLATION OF WATER OUTLETS
Panel
1/2"
1/8
1/8
Alternate
water
line location 1/2"
5/16
through
floor
14-15/32
Alternate
water
17-7/8
line hook-up
location
Water
floor
onthrough
the refrigerator
NOTE: Panels up to 3/4” will require special routing area
around handles. Dimensions may vary depending on
depth of panel.
1/2"
Cut
out
Alternate
water
1/2"location
line
through floor
Alternate
water
line location
Top View
through floor
5/16
67-9/32 Top View
67-9/32
Top View
Water hook-up
on the refrigerator
FRONT
- A minimum of 36-1/8" is required for refrigerator
installation with collar
With Dispenser
Cut
out
5/16
IMPORTANT: Before finalizing specifications for your
GE Profile Counter-Depth Refrigerator, please NOTE:
FREEZER PANEL
FRESH FOOD
WITH
DISPENSER Fresh PANEL
Freezer Panel
Food
14-15/32
- Be sure to allow for 1/2" or 3/4" side panels in addition
to the 36-1/8" minimum.
Water hook-up
Top View
on the refrigerator
Recommended
FRONT
FRONT
single loop of 1/4" copper water line
14-15/32
19-15/32
Water hook-up
on the refrigerator
Recommended
33-5/8
Allow 48" minimum water
single loop
1/4"
water line
24" ofline
to copper
enable refrigerator
to be pulled forward
DETAIL C
18"
Panels 1/4" thick
or less
1/8"
5/16"
Allow 48" minimum water
24" line to enable refrigerator
to be pulled forward
Recommended
water line
location using recess
in rear wall
Recommended single loop
of 1/4" copper water line
Recommended
single loop
Allow 48" minimum
water
of 1/4" copper
24" water line
line to enable refrigerator
to be pulled forward
Water hook-up
on the refrigerator
Allow 48" minimum water
line to enable refrigerator 24" 18"
to be pulled water
forward
Recommended
line
location using recess
in rear wall
Rear Wall
18" View
1/4" Max.
Water hook-up
on the refrigerator
Rear Wall View
18"
Recommended water line
location using recess
in rear wall
Rear Wall View
Recommended water line
location using recess
in rear wall
Rear Wall View
(FRESH FOOD PANEL SHOWN)
NOTCH REQUIRED AT TOP
CORNER AS NOTED.
For answers to your Monogram, GE Café™ Series,
GE Profile™ Series or GE Appliances product questions,
In.of water & Electric Ot. Art
visit our website at geappliances.com or call GE Answer
Center® Service, 800.626.2000.
In.of water & Electric Ot. Art
Listed by
Underwriters
Laboratories
Specification Revised 12/15
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator
FEATURES AND BENEFITS
ounter-depth design – Offers a built-in look by fitting nearly flush with
C
surrounding cabinetry
70" tall
Integrated shelf support system – Provides strong, flexible support
Adjustable slide-out, spillproof glass shelves – Raised edges help contain
spills and make cleanup quick and easy
Freezer Temp
Fridge Temp
Set
Features
REFRIGERATOR
FREEZER
F
F
Door Alarm On
TurboCool On
Replace Water Filter
On/Off
0°F is Recommended for Freezer
37°F is Recommended for Fridge
Water
Crushed
Cubed
Lock
Controls
Light
djustable Clear Look door bins – Offer ideal space for storing large containers
A
in the door and free up valuable space
In-the-door beverage rack – Beverages are chilled and ready without taking
up valuable space
Tilt-out freezer bins – Rotate forward for convienient access
Quick Ice setting – Creates ice up to 50% faster than normal settings
Turbo Cool setting – Drops interior temperature to maintain freshness
after frequent openings
Advanced filtration – Removes trace pharmaceuticals from water and ice* and uses
replacement filter MWF
(*Removes ibuprofen, atenolol, fluoxetine, progesterone and trimethoprim. These
pharmaceuticals are not necessarily in all users’ water.)
Model PZS23KPEWV – White
Model PZS23KPEBV – Black
UFAS
COMPLIANT
Specification Revised 12/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement