LOGO! Now twice as ingenious! The choice is yours: siemens.com/logo

LOGO! Now twice as ingenious! The choice is yours: siemens.com/logo
LOGO! Now twice as ingenious!
The choice is yours:
the well-proven logic module – now also with Ethernet
Micro Automation
siemens.com/logo
In infrastructure ...
Heating / ventilation / air-conditioning
■■Energy management
■■Heating
■■Cooling systems
■■Ventilation systems
■■Air-conditioning systems
Building management systems
■■Light control (outdoor and indoor
lighting)
■■Door/gate control
■■Roller blind and awning control
■■Irrigation and sprinkler systems
Monitoring equipment
■■Access controls
■■Monitoring of drive controls
■■Alarm systems
■■Limit value checks
■■Traffic light controllers
■■Luggage inspection
Profitable switching and controlling
In automation, all of the potential means of savings
Intelligent technology with a vision
must be consistently used – from planning and com-
LOGO! is ideally suited for implementing simple automation tasks in industry and building management systems.
The intelligent logic module is characterized by maximum user-friendliness and it leaves little to be desired in
terms of functionality, thanks in no small part to the high
memory capacity and efficient use of memory. With the
use of expansion modules, LOGO! can control even the
most complex plants without any problems.
missioning to operation. What is needed are systems
that allow the constantly increasing requirements
to be quickly and economically fulfilled: Intelligent
solutions that stand out due to maximum flexibility,
reliability, and user-friendliness. The best example of
innovative technology that completely fulfills these
high requirements is LOGO! – the world‘s leading logic
module for switching and controlling.
2
Maximum flexibility due to consistent modularity
A wide range of modules make it possible to individually
expand LOGO! to 24 digital inputs, 16 digital outputs,
8 analog inputs, and two analog outputs. Communication modules for AS-Interface and KNX are also available.
With the analog output module, for example, you can
solve simple control tasks. This is supported by the special
functions of PI controller, ramp function, and analog
multiplexing.
... and industry
Transport equipment
■■Conveyor belts
■■Lifting platforms
■■Lifts
■■Silo systems
■■Automatic feeders
Special solutions
■■Solar plants
■■Use on ships
■■Use in extreme ambient conditions
■■Display panels and traffic signboards
Machine controls
■■Motors, pump and valve controls
■■Air compressors
■■Extraction and filtering installations
■■Sewage plants
■■Sawing and planing machines
■■Etching and cleaning equipment
Tried and tested millions of times –
in numerous applications
New applications made possible
by new 0BA7 basic units
In combination with the LOGO! software Soft Comfort,
the handling of our logic module is child’s play: Creating programs, project simulating and documentation
are quite easy using drag & drop – for maximum userfriendliness. In addition, a display with the capability of
directly changing process parameters in the message text
always ensures professional handling and satisfied users.
All of this is the reason why LOGO! has proven itself over
the past 15 years in millions of machine and building
appli­cations around the world.
The performance of LOGO! can be expanded in terms of
the number of I/Os and program capacity by means of
simple networking. It is not always necessary to switch
to more complex PLC configurations for simple networking requirements. Instead, you can remain in the familiar, simple configuration world of our logic module and
continue networking easily and cost-effectively. Even in
a single family home, there are so many possible applications that the number of I/Os is exceeded by a single
LOGO!. The simple networking via Ethernet is useful here.
The new communication options via Ethernet now allow
small LOGO! networks to be set up – as well as communication with higher-level systems.
Whether in infrastructure
or industry – a quick and
cost-effective solution
3
Easy expansion
by means
of a text
display or
expansion
modules
for a reliable
solution
LOGO! – simple, brilliant, reliable
LOGO! 0BA6 basic units, together with the expansion
modules and the external text display, provide a
broad and proven basis for reliable solutions in
mechanical engineering and building management
LOGO! in assemblies with
the function modules
systems. Practice-oriented function blocks are easily
connected via the software using the cursor and
their interaction can be immediately tested.
The simplest connection
4
Outstanding performance and overview
Highlights of LOGO!
With LOGO! four of the eight digital inputs that are available on the hardware can be used as analog inputs and
four as high-speed counter inputs up to a frequency of
5 kHz. With a program memory for 200 function blocks,
the 12/24 V DC devices provide sufficient capacity for
many stand-alone applications. Up to 50 four-line message
texts with a maximum of 32 characters per line ensure
user-friendliness in practice and clearly display all of the
relevant machine parameters. Well-conceived options such
as ticker text, bar graph or status parameter also contribute to the user-friendliness. Function blocks for arithmetic and pulse width modulation open up further usage
options. Last but not least: the Teleservice option, which
often does away with costly on-site service calls and really
pays off if you sell your systems cross-regionally.
■■Can be modularly expanded up to 50 I/Os
Additional text display
LOGO! allows an additional text display, which is perfectly
tailored to the needs of a logic module, to be connected.
It is directly connected to the LOGO! without a communication module. The configuration is done using the same
function block as for the internal display. You decide
whether message texts are displayed on the internal or
­external display – or on both.
■■230 V units can be expanded with analog modules
■■All three phases can be combined in a configuration
■■Extremely simple software
■■Display of up to 50 messages, either by LC display on
the module, external TD, or both together
■■Supports 12 or 16 standard characters per line,
­depending on the selected character set; you can
­double the number of characters with the ticker
­function
■■Users can toggle between 2 languages
■■Display of up to 4 bar charts and up to 4 I/O
status parameters per message
■■Controllable backlight of both displays can also be
used in continuous operation
■■Password protection for STOP mode on TD
5
LOGO! – and now also with Ethernet
LOGO! 0BA7 impressively proves that we are con­
stantly further developing our pioneering logic
module. The two new basic devices supplement the
existing 0BA6 basic devices, which have already
been tried and tested worldwide.
6
Proven devices have been consistently further
developed
The developmental leap forward can even be seen on the
outside of our new LOGO! 0BA7 basic devices: They are
wider by two modular widths and the previous interface
has been replaced by an Ethernet interface on the underside of the device.
In addition, there is a slot for SD cards on the right front
of the device. In spite of these exterior changes, the new
devices are compatible with all existing I/O modules. Even
programs from the previous LOGO! generations can be
used in the new devices.
The highlight of the 0BA7 basic devices is without a doubt
the standard Ethernet interface. It is used as a programming interface and for communicating with other LOGO!
0BA7 basic devices or SIMATIC automation components
such as SIMATIC S7 CPUs, HMI Panels, and PCs. Up to
nine LOGO! devices can be networked via the Ethernet
­interface.
Standard Ethernet
interface for
communication
with further LOGO!
basic units or
other automation
components
New communication options
The networking is mainly used for direct communication between
several LOGO! devices. The advantages that result from this:
■■Increasing the number of I/Os in a configuration. One logic
module executes the program and the others only serve as an
I/O expansion – without processing their own program. This
means that a multi-cell layout in the control cabinet is now also
possible.
■■Expansion of the program memory. All logic modules process
their own program and only exchange some of the data among
each other.
Function extensions
–– Program memory extended to 400 function blocks
–– Astronomical clock
–– Min./Max.
–– Average value
–– Analog filter
–– Stopwatch
–– Macro and library function
–– Data logging
7
LOGO! Software – simply professional
LOGO! Soft Comfort – stands for sensationally easy
A decisive argument for LOGO!
and quick configuration. This allows the creation
LOGO! Soft Comfort is appealing in every respect. The
­user-friendliness of our software is unequaled on the market. The preferential configuration in the function block
­diagram is more manageable than in the contact diagram,
especially for programs with many special functions.
LOGO! Soft Comfort, however, allows programming in
both display formats and the execution of online tests –
as the only software in the logic module class. Since it can
be executed on three operating system platforms, you will
benefit from maximum flexibility when choosing a computer and a high-end device is not absolutely essential.
of ladder and function block diagrams by selecting
the respective functions and their connection via
drag & drop. In addition, the entire switching
­program can be simulated and tested offline on the
PC. Also possible: an online test in both program
displays during operation. Last but not least, LOGO!
Soft Comfort provides professional documentation
with all of the necessary project information such as
switching programs, comments, and parameter
settings.
8
The standard simulation function makes program development easy. You can immediately simulate, optimize and then
group individual program sections for total functionality.
The outstanding functionality of our software is rounded
out by professional tools for creating the user documentation. A context-sensitive help function brings additional
advantages: It puts an end to the tiresome business of
paging through manuals and reduces the weight of your
luggage when making service calls. Last but not least, an
integrated tutorial and numerous examples facilitate your
entry into modern automation technology.
1
Create
2
Simulate
3
1
Online test
4
Document
4
2
3
LOGO!
NEW
■■Astronomical clock
■■Min./Max.
■■Average value
■■Analog filter
■■Stopwatch
More functions ...
... and important innovations
With the current version of LOGO! Soft Comfort, you
can, of course, easily configure all of the new LOGO!
hardware and firmware functions.
The following five function blocks have been added:
Creating macro blocks
with library function
Recurring parts of programs can be saved separately as
complete blocks and used in other programs. You can
build up your own block library from regularly used partial
­applications and quickly and easily integrate them into
new projects. This speeds up testing and programming.
■■Astronomical clock
■■Min./Max.
■■Average value
■■Analog filter
■■Stopwatch
Sensationally
easy and quick
programming thanks to
43 function blocks and
operating via drag & drop
Data logging
Data from the production process can be saved in the internal memory of the LOGO! or on a standard SD card in order
to either read it with a PC or evaluate it from the SD card at
the workstation.
Networking
A real highlight of the LOGO! 0BA7 generation are the
­different communication modes:
■■Communication between LOGO! and LOGO! – the
second LOGO! functions as an I/O expansion without
its own program.
■■Communication between LOGO! and LOGO! –
the second LOGO! executes its own program and
­exchanges some data with the other one.
■■Communication between LOGO! and SIMATIC S7 CPUs
or Panels, which provide S7 communication via
­Ethernet.
9
LOGO! – the proven basic units ...
LOGO! impresses customers due to the wide variety of possible
­applications and it allows the easy implementation of compre­hensive
applications – last but not least due to the possibility of selecting
from among 38 integrated functions and linking them to up to
200 blocks. When operating and monitoring, the 4-line backlit
­display with a maximum of 32 characters per line ensures a high
­degree of user-friendliness. The message text allows the display of
text, setpoints and actual values, bar graphs and status parameters.
Of course, parameters can be adjusted in the message text. ­
Flexibility is always assured due to the diverse expansion options.
10
... and the new ones with Ethernet
You have grown with LOGO! and you want to always be able to solve
more tasks with a greater demand on industrial communication?
Then, the new LOGO! 0BA7 devices are the ideal solution for you.
With the new basic devices, you can easily expand old programs
by adding functions.
Also possible: the supplementing of additional I/Os or the integration
of a user-friendly operator guidance via touch panels. Previously
developed LOGO! programs can be used as a basis and the easy
­configuration continues.
LOGO!
simply ingenious –
and now …
11
LOGO! functions
LOGO! pays off
With the eight basic functions and 30 special functions, simple
switching programs can be created quickly – either directly on
the device or via PC. You can find a large selection of example
applications under www.siemens.com/logo
The eight basic functions
Up to 50% cost savings
■■Replaces many conventional switching
devices
■■Requires less space in the control cabinet
■■Fewer accessories
■■Less storage space
■■Saves on servicing costs because it is free
of wear
AND (and) series
connection NO
contact
NAND (and not)
­parallel connection
NC contact
Up to 70% time savings
■■Simply snap it onto a standard
mounting rail
■■Low wiring overhead
■■Simple programming using LOGO!
Soft Comfort
■■Use ready-to-use sample programs at
no cost or create and test them on the PC
and quickly transfer them free of errors
■■Automatic daylight-saving adjustment
■■Documentation
AND with edge
­evaluation
(pos. edge)
NAND (and not)
with edge evaluation (neg. edge)
OR (or) parallel
­connection NO
contact
Up to 70% space savings
■■4/6 modular widths suffice as a replacement for many relays, time switches, and
contactor relays
■■8 basic and 30/35 special functions
replace many conventional switching
devices
NOR (or not)
series connection
NC contact
Universally applicable
■■Vibration-proof
■■High electromagnetic compatibility (EMC)
■■Fully industrial-grade
■■For all climatic conditions
■■Radio suppression class B
■■All of the required certifications for
worldwide use
■■Marine approval
XOR (exclusive or)
2-way changeover
NOT (not)
inverter*
The special functions
ON
delay
12
OFF
delay
ON/OFF
delay
Latching ON
delay
*Binary inputs of function blocks can be negated directly
Interval relay/
Pulse output
Interval relay,
edge-triggered
Pulse generator
LOGO! basic units 0BA6
LOGO! text display
LOGO! basic units 0BA7
LOGO! basic unit 0BA6
■■38/43 ready-to-use functions integrated – no
additional devices such as operating hours
counter required
■■Linking of 200/400 functions possible
■■8 digital inputs (incl. 4 AI with 12/24 V DC)
and 4 digital outputs on board
■■Flexibly expandable up to 24 DI, 16 DO, 8 AI,
and 2 AO
■■Display of message texts, actual and setpoint
values and direct modification of the values
on the display (not on Pure variants)
■■Integrated data retentivity – ensures backup
of the current values in the event of a power
failure
■■Software LOGO! Soft Comfort V 7 for the userfriendly creation of switching programs on the
PC for all LOGO! generations, which can run
on various operating systems
Random
Staircase lighting
timer
13
Convenience
switch
Week time
switch
Year time
switch
Up/down
counter
Operating hours
counter
Threshold
switch
Digital expansion modules
LOGO! basic unit 0BA7
■■Standard Ethernet interface as
programming interface and for
communication with other LOGO!
basic devices 0BA7 or SIMATIC
automation components such
as SIMATIC S7 CPUs, HMI Panels
and PCs
■■A maximum of 9 LOGO!s can
be networked
■■Data logging
■■Standard SD cards as the
storage medium
■■Program and connectioncompatible with LOGO! 0BA6
LOGO!
simply
twice as
ingenious
Analog
comparator
Analog threshold
switch
Analog amplifier
Analog
monitoring
Analog difference
threshold switch
Latching
relay
Current impulse relay
Software
switch
14
Analog expansion modules
Communication modules
NEW for 0BA7
Astronomical
clock
Average value
LOGO! modules
LOGO! text display
For operator prompting and servicing for the
display of message texts, input and output
statuses, and for setting process parameters
(usable as of basic device 0BA6, supports the
range of functions of the 0BA6 basic devices)
■■ Display of up to 50 messages
■■ Users can toggle between 2 languages
■■ Display of up to 4 bar charts and up to
4 I/O status parameters per message
■■ Supports max. 32 Standard characters
per line
■■ Controllable backlight
■■ Password protection for RUN/STOP mode
on TD
Digital expansion modules*
■■ Expansion of the digital inputs and
outputs:
DM8 230R / DM16 230R
DM8 24 / DM16 24
DM8 12 / 24R
DM8 24R
DM16 24R
Analog expansion modules*
■■ Expansion of the analog inputs:
AM2 for 0–10 V or 0/4 ... 20 mA signals
AM2 RTD for Pt100 or Pt1000
with automatic sensor detection
AM2 AQ for 0–10 V or 0/4 ... 20 mA signals
Analog filter
Communication modules*
■■ CM AS-Interface slave
–– 4 DI/4 DO as interface to the AS-Interface
master
■■ CM EIB / KNX
–– max. 16 DI, 12 DO, 8 AI and 8 AO as interface
to the KNX
–– The date and time can be synchronized
via KNX
–– All of the digital and analog input and output
signals are available as communication
objects on the KNX
–– Dimming and shutter/blind actuators on
the KNX can be controlled in a systemconformant way
Stopwatch
Min./Max.
*All expansion modules are available for 0BA6 and 0BA7.
Shift register
PI controller
Ramp function
Analog
multiplexer
Message text
expanded
Arithmetic
function
Pulse width
modulation
15
LOGO! 0BA7– more options in detail
With an Ethernet interface and SD card slot, LOGO!
Communication like never before
0BA7 opens up completely new perspectives – not only
Devices with an “E” in their names can communicate with
each other via Ethernet. This can happen in various ways:
in terms of communication capabilities. The standard
SD cards can be used – e.g. to copy programs or save
data/projects with comments. In addition, the program
memory has been expanded to 400 function blocks
and, in place of the optional battery, the internal
buffering of the real-time clock has been extended to
20 days.
16
■■Master/slave connections
between LOGO! and LOGO!
In this case, only one of a maximum of 9 basic devices processes a user program. The others only serve
to ­expand the I/O capacity. They provide the input
information of the digital and analog inputs to the first
LOGO! and execute the switching commands on the
other side for the digital outputs of their hardware, or
they forward the analog output values to the I/O. This
does away with the limitation on the number of channels of the previous basic devices. Of course, the basic
devices that are being used as slaves can be equipped
with the proven expansion modules up to the maximum process image.
■■Master/master connections
between LOGO! and LOGO!
In this mode, up to 9 basic devices can also be connected to each other. However, each LOGO! processes
its own program and shares only the generally needed
information with the others. In this way, small, networked systems with easy program structures can be
created. Each unit can continue to solve its subtask
without the others, if necessary.
In both cases, up to 9 basic devices and a PC/PG for
programming can be interconnected. The theoretical
degree of expansion of a LOGO! configuration is thus
88 DI, 80 DQ, 40 AI, and 18 AQ.
■■Communication with SIMATIC S7
The new LOGO! basic modules can be coupled to higherlevel automation structures (e.g. SIMATIC S7 CPUs or
HMI Panels with Ethernet interface), because they can
work with the standard S7 protocol. This allows, for
example, the use of SIMATIC Touch Panels for operating
a machine controlled by LOGO!. Of course, you can also
combine these communication options as needed.
Twice the program memory and
five new function blocks
The five new function blocks pay off in practice. Thus, for
example, minimum and maximum temperature values can
be determined over the course of a day or mean values
can be formed over a defined period of time. The duration
of any process can be measured using a stopwatch. In
­addition, there is an astronomical clock, which can be
used for such things as controlling outside lighting or
feeding times in animal husbandry, and an analog filter,
which helps to smooth the influence of interference
­pulses on the signal profile. Last but not least, the number
of usable shift registers has been increased to four. Thus,
shift registers with up to 32 bits are now possible.
Completely new perspectives
for communication,
data handling and storage
17
Increased engineering efficiency: reusable sections
of a program
More complex applications can be programmed using
LOGO! Soft Comfort V7 even easier than before: Macros
can now be used and libraries can be created for recurring
program sequences (e.g. for roller blind controllers).
­Corresponding program sections can then be selected
and reused at any time. When opening a program that
contains macros from the library, you are notified if the
macro has been changed since its last use. Macros are
also helpful when creating step sequence controls.
New usage options thanks to data logging
Thanks to data logging, you can now save specific pro­
duction or process data in a data area in the LOGO! –
­either by using the internal memory or by using a standard SD card up to 8 GB. This is advantageous if LOGO! is
used for controlling temperatures or monitoring levels,
for example. Corresponding characteristics can be easily
documented and evaluated. In the program, the user can
define the time intervals in which or the event by which
the temperature data or levels are to be recorded.
18
Simply more –
many more
­options in
­every respect
New advantages, old strengths
The status of the inputs and outputs are transferred to the
PC via the Ethernet interface and are documented there
in an Excel table, for example. However, the new software
also facilitates programming for users of the previous
LOGO!: Function blocks can be exchanged without having
to create new connections. The simplified handling includes additional capabilities for aligning the blocks and
the additional linking of comments.
Of course, the new generation of devices are also
­characterized by the proven strengths of LOGO!: from the
flexible, modular design and easy creation of programs,
project simulation and documentation by means of
drag & drop to the built-in display with HMI functionality.
The new basic devices are fully compatible with the old
ones, apart from the increased width of the devices
(108 mm instead of 72 mm), which is due to the implemented innovations. They have the built-in display, cursor
keys, and the familiar signal ports. Therefore, with their
expanded functionality, they can completely replace the
old 0BA6 basic devices.
In addition, all of the old expansion modules can be used
on the new basic devices without restrictions. The only
thing that must be noted is that an Ethernet cable is required in order to directly transfer an existing program
from one PC to one of the new basic devices.
19
LOGO! modular – the technical details
Basic units
LOGO! 12/24RC1), LOGO! 12/24RCo2)
LOGO! 24C, LOGO! 24Co
LOGO! 24RC1), LOGO! 24RCo2)
Inputs
8
8
8
of which can be used in analog mode
4 (0 to 10 V)
4 (0 to 10 V)
–
Input/supply voltage
12/24 V DC
24 V DC
24 V AC/DC
Permissible range
with signal “0”
with signal “1”
Input current
10.8 V ... 28.8 V DC
max. 5 V DC
min. 8.5 V DC
1.5 mA (Ι3 ... Ι6), 0.1 mA (Ι 1, Ι 2, Ι 7, Ι 8)
20.4 V ... 28.8 V DC
max. 5 V DC
min. 12 V DC
2 mA (Ι3 ... Ι6), 0.1 mA (Ι 1, Ι 2, Ι 7, Ι 8)
20.4 ... 28.8 V DC
20.4 ... 26.4 V AC
max. 5 V AC/DC
min. 12 V AC/DC, 2.5 mA
Outputs
4 relays
4 transistors
4 relays
Continuous current
10 A with resistive load;
3 A with inductive load
0.3 A
10 A with resistive load;
3 A with inductive load
Short-circuit protection
External fuse required
Electronic (approx. 1 A)
External fuse required
Switching frequency
2 Hz with resistive load;
0.5 Hz with inductive load
10 Hz
2 Hz with resistive load;
0.5 Hz with inductive load
Cycle time
< 0.1 ms/function
< 0.1 ms/function
< 0.1 ms/function
Integrated time switches/
power reserve
Yes / typ. 80 h
(2 years with battery module)
Yes / typ. 80 h
(2 years with battery module)
Yes / typ. 80 h
(2 years with battery module)
Connection cables
2 x 1.5 mm2 or 1 x 2.5 mm2
Ambient temperature
0 to + 55 ºC
Storage temperature
– 40 ºC to + 70 ºC
Emitted interference
In accordance with EN 55011 (limit class B)
Degree of protection
IP20
Certification
In accordance with VDE 0631, IEC 1131, FM Class 1, Div 2, cULus, C-Tick, marine approvals
Mounting
On 35 mm standard mounting rail, 4 MW, or wall-mounting
Dimensions
72 (4 MW) x 90 x 55 mm (W x H x D)
Programming cable
LOGO! PC cable, (RS232 or USB)
LOGO! PC cable, (RS232 or USB)
LOGO! PC cable, (RS232 or USB)
Optional backup battery
Yes
Yes
Yes
LOGO! <=> LOGO!
communication (Ethernet)
No
No
No
LOGO! <=> network
(Ethernet)
No
No
No
Maximum
program memory
200 blocks
200 blocks
200 blocks
External memory module
LOGO! memory card
LOGO! memory card
LOGO! memory card
Data logging
No
No
No
Online status chart
No
No
No
Macro function
No
No
No
Digital modules
LOGO! DM8 12/24R
LOGO! DM8 24
DM16 24
Inputs
4
4/8
Input/supply voltage
12/24 V DC
24 V DC
Permitted range
10.8 ... 28.8 V DC
20.4 ... 28.8 V DC
with signal “0”
with signal “1”
max. 5 V DC
min. 8.5 V DC
max. 5 V DC
min. 12 V DC
Input current
1.5 mA
2 mA
Outputs
4 relays
4/8 transistors
Continuous current Ith (per terminal)
5 A with resistive load;
3 A with inductive load
0.3 A
Short-circuit protection
External fuse required
Electronic (approx. 1 A)
Switching frequency
2 Hz with resistive load;
0.5 Hz with inductive load
10 Hz
Power loss
0.3 ... 1.7 W at 12 V DC
0.4 ... 1.8 W at 24 V DC
0.8 ... 1.1 W*
0.8 ... 1.7 W**
Dimensions (W x H x D)
36 (2 MW) x 90 x 53 mm
36 (2 MW) x 90 x 53 mm
72 (4 MW) x 90 x 53 mm
LOGO! 230RC1), LOGO! 230RCo2)
LOGO! 12/24 RCE
LOGO! 230 RCE
8
8
8
–
4 (0 to 10 V)
–
115/240 V AC/DC
12/24 V DC
115/240 V AC/DC
85 ... 265 V AC
100 ... 253 V DC
max. 40 V AC/30 V DC
min. 79 V AC/79 V DC, 0.08 mA
10.8 V ... 28.8 V DC
max. 5 V DC
min. 8.5 V DC
1.5 mA (I3 ... I6) 0.1 mA (I 1, I 2, I 7, I 8)
85 ... 265 V AC
100 ... 253 V DC
max. 40 V AC/30 V DC
min. 79 V AC/79 V DC, 0.08 mA
4 relays
4 relays
4 relays
10 A with resistive load;
3 A with inductive load
10 A with resistive load;
3 A with inductive load
10 A with resistive load;
3 A with inductive load
External fuse required
External fuse required
External fuse required
2 Hz with resistive load;
0.5 Hz with inductive load
2 Hz with resistive load;
0.5 Hz with inductive load
2 Hz with resistive load;
0.5 Hz with inductive load
< 0.1 ms/function
< 0.1 ms/function
< 0.1 ms/function
Yes / typ. 80 h
(2 years with battery module)
Yes / typ. 480 h; no battery
Yes / typ. 480 h; no battery
On 35 mm standard mounting rail, 6 MW, or wall-mounting
108 (6 MW) x 90 x 55 mm (W x H x D)
108 (6 MW) x 90 x 55 mm (W x H x D)
LOGO! PC cable, (RS232 or USB)
Ethernet
Ethernet
Yes
No
No
No
Yes, max. 8 LOGO!s + 1PC/PG
Yes, max. 8 LOGO!s + 1PC/PG
No
Yes, max. 8 TN
(LOGO!, SIMATIC CPU, 1x SIMATIC HMI, PC)
Yes, max. 8 TN
(LOGO!, SIMATIC CPU, 1x SIMATIC HMI, PC)
200 blocks
400 blocks
400 blocks
LOGO! memory card
SIMATIC memory card or
standard SD card max. 8 GB
SIMATIC memory card or
standard SD card max. 8 GB
No
Internal memory/SD card
Internal memory/SD card
No
Yes, with saving on the PC
Yes, with saving on the PC
No
Yes
Yes
LOGO! DM8 24R
DM16 24R
LOGO! DM8 230R
DM16 230R
4/8
4/8
24 V AC/DC*
24 V DC**
115/240 V AC/DC
20.4 ... 28.8 V DC, 20.4 ... 26.4 V AC*
85 ... 265 V AC, 100 ... 253 V DC
max. 5 V AC/DC
min. 12 V AC/DC*
max. 40 V AC
min. 79 V AC
2.5 mA*, 2.0 mA**
0.08 mA
4/8 relays
4/8 relays
5 A with resistive load;
3 A with inductive load
5 A with resistive load;
3 A with inductive load
External fuse required
External fuse required
2 Hz with resistive load;
0.5 Hz with inductive load
2 Hz with resistive load;
0.5 Hz with inductive load
0.4 ... 1.8 W at 24 V DC*
0.9 ... 2.7 W at 24 V AC*
0.7 ... 2.5 W at 24 V DC**
1.1 ... 3.5 W (115 V AC) ... 4.5**
2.4 ... 4.8 W (240 V AC) ... 5.5**
0.5 ... 1.8 W (115 V DC) ... 2.9**
1.2 ... 2.4 W (240 V DC) ... 4.8**
36 (2 MW) x 90 x 53 mm
72 (4 MW) x 90 x 53 mm
36 (2 MW) x 90 x 53 mm
72 (4 MW) x 90 x 53 mm
R: Relay outputs, C: Clock/time switch,
o: without display
E: Ethernet interface
* for DM8 module, ** for DM16 module
1) A
s SIPLUS component also for extended temperature
range – 25 ... +70 °C and corrosive atmosphere/
condensation (www.siemens.com/siplus)
2) A
s SIPLUS component also for extended temperature
range – 40 ... +70 °C and corrosive atmosphere/
condensation (www.siemens.com/siplus)
21
LOGO! modular – the technical data
Analog modules
LOGO! AM22)
LOGO! AM2 RTD
LOGO! AM2 AQ2)
Supply voltage
12/24 V DC
12/24 V DC
24 V DC
Permitted range
10.8 ... 28.8 V DC
10.8 ... 28.8 V DC
20.4 ... 28.8 V DC
Analog inputs/outputs
2/0
2/0 x PT100 or PT1000
2-wire or 3-wire
Automatic sensor detection
0/2
Measuring range
2)
–50 ºC ... +200 ºC
–
Input range/output range
0 ... 10 V or 0/4 ... 20 mA
–
0 ... 10 V or 0/4 ... 20 mA
Resolution
10 bit standardized to 0 – 1000
0.25 °C
10 bit standardized to 0 – 1000
Cable length
(shielded and twisted)
10 m
10 m
10 m
Encoder supply
none
1.1 mA
–
Power loss
at 12 V DC
at 24 V DC
0.3 ... 0.6 W
0.6 ... 1.2 W
0.3 ... 0.6 W
0.6 ... 1.2 W
–
0.6 ... 1.2 W
Dimensions (W x H x D)
36 (2 MW) x 90 x 53 mm
36 (2 MW) x 90 x 53 mm
36 (2 MW) x 90 x 53 mm
As SIPLUS component also for extended temperature range
– 40 ... + 70 °C and corrosive atmosphere/condensation (www.siemens.com/siplus)
LOGO! TD Text Display
Supply voltage
12 V DC, 24 V AC/DC
Permitted range
10.2 ... 28.8 V DC or 20.4 to 26.4 V AC (47 ... 63 Hz)
Input
6 standard keys, 4 function keys (tactile-touch keys)
Display
61 x 33 mm, white, controllable backlight, adjustable contrast
Lines/characters
4 lines, 12/16 characters per line (depends on character set)
Length of connecting cable
2.5 m (extendable to 10 m with “universal“ 9-wire standard serial cable)
Power consumption at 24 V DC
typ. 65 mA (12 V DC), typ. 40 mA (24 V DC), typ. 90 mA (24 V AC)
Cutout dimensions (W x H x D)
119.5 x 78.5 x 1.5 – 4.0 mm for panel mounting (128.3 x 86 x 38.7 mm total)
Communication modules (CM)
EIB / KNX
CM AS-Interface (slave)
Supply voltage
12/24 V DC
24 V DC
Permitted range
20.4 ... 28.8 V DC
20.4 ... 26.4 V AC
19.2 ... 28.8 V DC
Digital inputs*
16 (can also be configured
as Monoflop)
4
Analog inputs*
8
–
Analog outputs*
2 (max. 8)
–
Digital outputs*
12
4
Dimensions (W x H x D)
2 MW 36 x 90 x 53 mm
2 MW 36 x 90 x 53 mm
* Mapping to LOGO! inputs/outputs
22
LOGO!
ordering data
LOGO! versions
Order No.
LOGO! 12/24 RCE
6ED1 052-1MD00-0BA7
LOGO! 230 RCE
6ED1 052-1FB00-0BA7
LOGO! 24 C
6ED1 052-1CC01-0BA6
LOGO! 24 Co
6ED1 052-2CC01-0BA6
LOGO! 12/24RC
6ED1 052-1MD00-0BA6
LOGO! 12/24RCo
6ED1 052-2MD00-0BA6
LOGO! 24RC (AC/DC)
6ED1 052-1HB00-0BA6
LOGO! 24RCo (AC/DC)
6ED1 052-2HB00-0BA6
LOGO! 230RC
6ED1 052-1FB00-0BA6
LOGO! 230RCo
6ED1 052-2FB00-0BA6
LOGO! TD
6ED1 055-4MH00-0BA0
Expansion modules
Order No.
LOGO! DM8 24
6ED1 055-1CB00-0BA0
LOGO! DM8 12/24R
6ED1 055-1MB00-0BA1
LOGO! DM8 24R (AC/DC)
6ED1 055-1HB00-0BA0
LOGO! DM8 230R
6ED1 055-1FB00-0BA1
LOGO! DM16 24
6ED1 055-1CB10-0BA0
LOGO! DM16 24R
6ED1 055-1NB10-0BA0
LOGO! DM16 230R
6ED1 055-1FB10-0BA0
LOGO! AM2
6ED1 055-1MA00-0BA0
LOGO! AM2 RTD
6ED1 055-1MD00-0BA1
LOGO! AM2 AQ
6ED1 055-1MM00-0BA1
Communication modules
Order No.
LOGO! AS-i
3RK1 400-0CE10-0AA2
LOGO! EIB / KNX
6BK1 700-0BA00-0AA2
Optional accessories
Order No.
LOGO! Manual German
6ED1 050-1AA00-0AE8
LOGO! Manual English
6ED1 050-1AA00-0BE8
LOGO! Memory Card
6ED1 056-1DA00-0BA0
LOGO! Battery Card
6ED1 056-6XA00-0BA0
LOGO! Combo Memory &
Battery Card
6ED1 056-7DA00-0BA0
LOGO! Soft Comfort V 7.0
6ED1 058-0BA02-0YA1
LOGO! Soft Comfort V 7.0
Upgrade
6ED1 058-0CA02-0YE1
LOGO! PC cable
6ED1 057-1AA00-0BA0
LOGO! USB PC cable
6ED1 057-1AA01-0BA0
LOGO! modem cable
6ED1 057-1CA00-0BA0
R: Relay outputs, C: Clock/time switch, o: without display
The products listed here may be subject to the current European/German and/
or US export regulations.
LOGO! accessories
LOGO! PC cables/USB PC cables (only 0BA6)
For the simple transfer of LOGO! switching
programs to and from PCs
LOGO! Switch
• For simple networking directly in the
distribution board
• Provides 4 RJ45 ports, of which one is
at the front
More information: www.siemens.com/logo-csm
LOGO! Manual
For intro to LOGO!
• Detailed information on operation
• Description of all integrated functions
• Many practical application examples
• Available in 6 languages
LOGO! Power
Reliable power supply for LOGO! – for converting
the line voltage of 100/240 V AC to the respective
operating voltage
• Suitable for all LOGO! 12 V DC and 24 V DC
• Versions for different output currents
More information: www.siemens.com/sitop
LOGO! Contact
Hum-free switching module
• For switching resistive loads up to 20 A
• For the direct switching of motors up to 4 kW
• For powerful loads in noise-sensitive areas
More information:
www.siemens.com/lowvoltage
LOGO! Prom (only 0BA6)
For replication of program modules
• For copying of modules
• For writing to modules via LOGO! Soft Comfort
More information: www.siemens.com/siplus
Front panel mounting frame
For installation in the control cabinet door
• Front IP65 (IP30 without glass)
• 4 MW or 8 MW (optional with keys)
More information: www.siemens.com/siplus
LOGO! Upmitter
For use with critical power supplies
Produces stable 24 V DC at the output with
8 to 59 V DC at the input
More information: www.siemens.com/siplus
23
Further information on LOGO!
can be found on the Internet –
under www.siemens.com/logo
• Comprehensive product information
• Free demonstration software
• Software upgrades
• Ready-to-use applications
• News
• Customer magazine GO!
• And much more
Of course, you can also purchase software, hardware or promotion packages for LOGO! online. In
addition, on request you also find personal support
under “Service and Support.” We have compiled
further example applications and configuration tools
for you under www.siemens.com/microset.
SIPLUS LOGO! in the Internet
www.siemens.com/siplus
You can find hardened LOGO! modules there with
• extended temperature range
• protection against corrosive atmosphere/
condensation
Siemens AG
Industry Sector
Industry Automation
P.O. Box 48 48
90026 NUREMBERG
GERMANY
Subject to change without prior notice 02/12
Order No. E20001-A1120-P271-X-7600
Dispo 06307
WÜ/32480 MI.AS.LO.XXXX.52.2.02 021210.
Printed in Germany
© Siemens AG 2012
The information provided in this brochure contains me­re­ly general descriptions
or characteristics of per­for­m­ance which in ac­tual case of use do not always
­ap­ply as described or which may change as a result of fur­ther de­ve­lopment
of the pro­ducts. An obligation to provide the respective characteristics shall
only exist if ex­pressly agreed in the terms of contract. All product designations
may be trademarks or product na­mes of Siemens AG or supplier companies
whose use by third parties for their own purposes could violate the rights
of the o
­ wners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement