C-265 Brochure
C Series Architectural Speakers
The C 265 is the perfect in-wall speaker for
filling your room with rich sound without the
clutter of large box speakers. The 6.5” rigid
Kevlar woofer gives tight, clean bass and the
tweeter can be attenuated to adjust the sound to
your liking. Whether it's background music or
serious listening, the C 265 will bring your home,
theater or office to life with uncompromising
sound quality, virtually invisible installation and
exceptional value. Enjoy!
6-1/2" extended throw Kevlar woofer with phase plug,
vented Strontium magnet, and dust screen
1" aluminum dome tweeter utilizing dual chamber design
for smoother response, and ferrofluid damping/cooling
Three position level control for treble
12 dB/octave crossover network with premium parts
24k gold "Constant Pressure" 10 AWG push terminals
Knockout plug for installing infrared receiver
Acoustically transparent, fine mesh grill with paint shield
Woven dust screen to protect woofer from in-wall debris
Six-point "dog-leg" mounting system
Optional NCK-6M New Construction Kit
Parasound's 10 years parts, 5 years labor warranty
Frequency response: 42Hz - 22kHz +/- 3dB
Nominal impedance: 8Ω
Minimum impedance: 6Ω
Sensitivity: 88dB 1 watt/1 meter
Power range: 10 - 80 watts
Woofer size: 6-1/2”
Woofer cone material: Kevlar
Surround material: Butyl rubber
Tweeter size/material: 1” aluminum dome
Cut-out hole dimensions: 7-3/8" x 10-3/4"
Outer edge of frame: 8-5/8" x 12"
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF