PS-VC-202A_v1.0
Product Specification of VC-202A
Confidential
Product Specification
Ethernet Over VDSL 2 Converter
VC-202A
Version 1.0
This document contains confidential proprietary information and is property of PLANET. The contents of this
document should not be disclosed to unauthorized persons without the written consent of PLANET.
Change History:
Revision
Version 1.0
Author
Reviewed by:
Date
2010/6/7
Bryant Wu
Kent Kang
Filename: PS-VC-202A_v1.0.doc
Author
Bryant Wu
Change List
Initial release
Editor:
Approved by:
Page 1 of 8
Bryant Wu
Tom Shih
Printed on 8/3/2010
Product Specification of VC-202A
Confidential
1.
PRODUCT DESCRIPTION
The VC-202A Ethernet over VDSL2 converter has a switching architecture with one RJ-45 10/100Mbps Fast Ethernet
port and one BNC Ethernet over VDSL2 port. It is ideal for signal conversion by transmitting the Ethernet data from the
standard RG58 cable to the coaxial cable and extending the distance.
The Ethernet over VDSL2 combines the Ethernet and VDSL technology to transmit the Ethernet format data by using
VDSL signaling over the exist coaxial cable. Therefore, it will be very good for building a coaxial cable network because
of every room or house could use the their existing coaxial cable to transmit data to the Internet and the whole building
could share the Internet line to the wide area network with minimum cost.
The VC-202A can be set to CO mode or CPE mode via a DIP switch. When the VC-202A-CO is used to connect to the
other VC-202A-CPE as a standalone pair, up to 100/66Mbps asymmetric data rate at 200m and up to 25/5Mbps
asymmetric band plan at 3.0km.With much enough bandwidth, the 100/100 Mbps of symmetric and 100/66Mbps of
Asymmetric capability enables many multi-media services on local Internet come true, like VOD (Video on Demand),
Internet caching server, distance education, and so on.
In one community or hotel, we just need to install one local server and then the multi-media services will be localized.
Therefore, people do not need to access the services through Internet but using local area network with better bandwidth
and efficiency. Meanwhile, this kind of infrastructure will minimize the burden on the Internet.
The converter is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols.
Moreover, the rich diagnostic LEDs on the front-panel provide the operating status of individual port and the whole
system. There are two models of the converters, one is used for client side and the other is central side. If you want to
setup one pair of converters for point-to-point connection then one set must be CPE (client) mode and the other one is
CO mode.
The cable specifications of the connection are listed as following:
■ 10Base-T, Category 3, 4 or 5 UTP
■ 100Base-TX, Category 5, 5e or 6 UTP
■ Ethernet over VDSL, Coaxial cable
Filename: PS-VC-202A_v1.0.doc
Page 2 of 8
Printed on 8/3/2010
Product Specification of VC-202A
Confidential
The below drawings listed below are typical application for the Ethernet over VDSL2 converter.
2. PRODUCT FEATURES
„
Cost-effect VDSL2 CO / CPE bridge solution
„
One box design, CO / CPE selectable via DIP Switch
„
Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
„
Defines asymmetric (Plan 998) and symmetric band plans for the transmission of upstream and downstream
signals
„
DMT (Discrete Multi-Tone) line coding
„
Half Duplex Back pressure and IEEE 802.3x Full Duplex Pause frame Flow Control
„
Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent
„
VDSL2 stand-alone transceiver for simple bridge modem application
„
Advantage of minimum installation time (Simply as Plug-and-Play)
„
Selectable target band plan and target SNR margin
„
Support extensive LED indicators for network diagnostics
„
Co-work with PLANET MC family Media Chassis ( MC-700 / 1500 / 1500R / 1500R48)
„
Compact in size, wall-mountable design, easy installation
3. PRODUCT SPECIFICATION
3.1 MAIN COMPONENT
VDSL Analog Chip
Metanoia MT3201
x1
VDSL Digital Chip
Metanoia MT2201
x1
10/100 Fast Ethernet MAC
Realtek RTL8306S
x1
Filename: PS-VC-202A_v1.0.doc
Page 3 of 8
Printed on 8/3/2010
Product Specification of VC-202A
Confidential
3.2 FUNCTIONAL SPECIFICATIONS
Product
VC-202A
Ethernet over VDSL 2 Converter
Hardware Specification
10/100Base-TX
1 RJ-45, Auto-negotiation and Auto-MDI/MDI-X
Coaxial
1 BNC, female connector
Ports
4 position DIP switch
DIP Switch
• CO / CPE mode select
• Selectable fast and interleaved mode
Functionality
• Selectable target Band Plan
• Selectable target SNR mode
• VDSL-DMT
- ITU-T G.993.1 VDSL
Encoding
- ITU-T G.997.1
- ITU-T G.993.2 VDSL2 (Profile 17a Support)
• One Power,
• 3 for Coaxial / VDSL2 WAN :
LED Indicators
o
Green, LNK/ACT
o
Green, CO mode
o
Green, CPE mode
• 2 for per RJ-45 10/100Base-TX port
Ethernet
Cabling
VDSL
Performance
Filename: PS-VC-202A_v1.0.doc
o
Green, LNK/ACT.
o
Green, Speed
• 10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
• 100Base-TX: 2-pair UTP Cat.5, 5e, 6 up to 100m (328ft)
• 50 ohm, RG58A/U, RG58C/U, RG58/U or 75 ohm, RG6 (Distance
up to 3.0km)
Asymmetric
Symmetric
。
。
。
。
。
。
。
。
。
。
。
。
。
。
。
200m -> 100/65Mbps
400m -> 100/64Mbps
600m -> 100/59Mbps
800m -> 100/53Mbps
1000m -> 94/44Mbps
1200m -> 84/36Mbps
1400m -> 74/28Mbps
1600m -> 66/19Mbps
1800m -> 60/14Mbps
2000m -> 44/15Mbps
2200m -> 35/12Mbps
2400m -> 32/10Mbps
2600m -> 29/8Mbps
2800m -> 27/6Mbps
3000m -> 25/5Mbps
Page 4 of 8
。
。
。
。
。
。
。
。
。
。
。
。
。
。
。
200m -> 100/100Mbps
400m -> 97/100Mbps
600m -> 86/91Mbps
800m -> 79/80Mbps
1000m -> 69/66Mbps
1200m -> 60/52Mbps
1400m -> 51/41Mbps
1600m -> 45/36Mbps
1800m -> 40/29Mbps
2000m -> 27/26Mbps
2200m -> 23/24Mbps
2400m -> 22/21Mbps
2600m -> 20/18Mbps
2800m -> 18/15Mbps
3000m -> 17/13Mbps
Printed on 8/3/2010
Product Specification of VC-202A
Confidential
Standard Conformance
Regulation Compliance
FCC Part 15 Class A, CE
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x Full Duplex Pause frame Flow Control
Standards Compliance
ITU-T
。
G.993.1 (VDSL)
。
G.997.1
。
G.993.2 VDSL2 (Profile 17a Support)
3.3 PHYSICAL SPECIFICATION
■
Dimensions
26 x 70 x 97mm (H x W x D)
■
Weight:
210g
Filename: PS-VC-202A_v1.0.doc
Page 5 of 8
Printed on 8/3/2010
Product Specification of VC-202A
Confidential
■
Diagram:
Top view
Filename: PS-VC-202A_v1.0.doc
Page 6 of 8
Printed on 8/3/2010
Product Specification of VC-202A
Confidential
Front view
Rear view
■
LED Definition
†
System
LED
Color
PWR
Green
†
Function
Lit:
Indicate that the VDSL Converter has power.
Off:
Indicate that the VDSL Converter has no power.
VDSL
LED
LNK/ACT
Color
Green
Function
Lit:
Indicate that the VDSL link is established.
Fast Blink:
Indicate that the VDSL link is at training status
Slow Blink: Indicate that the VDSL link is at idle status
†
CO
Green
Lit:
Indicate the VDSL Bridge is running at CO mode
CPE
Green
Lit:
Indicate the VDSL Bridge is running at CPE mode
10/100Base-TX Port
LED
LNK/ACT
100
Color
Green
Function
Lit:
Indicate that the port is link up.
Blink:
Indicate that the switch is actively sending or receiving data over that port
Off:
Indicate that the port is link down
Lit:
Indicate that the port is operating at 100Mbps.
Off:
Indicate that the port is link down or 10Mbps.
Green
Filename: PS-VC-202A_v1.0.doc
Page 7 of 8
Printed on 8/3/2010
Product Specification of VC-202A
Confidential
„ DIP Switch Setting
DIP-1
DIP-2
DIP-3
DIP-4
Mode
Channel
Band Plan
SNR
OFF
CO
Interleave
Symm
9dB
ON(default)
CPE
Fast
Asymm
6dB
3.4 ENVIRONMENTAL SPECIFICATION
Operating
Temperature:
0~50°C
Relative Humidity:
10~90 %( non-condensing)
Storage
Temperature:
-10~70°C
Relative Humidity:
10~90 %( non-condensing)
3.5 ELECTRICAL SPECIFICATION
Power Requirement: DC 5V, 2A
Power Consumption: 6.30 Watts / 21.4 BTU (maximum)
3.6 REGULATORY COMPLIANCE
FCC Part 15 Class A, CE
3.7 RELIABILITY
MTBF > 50,000Hrs @25 Degree C
3.8 BASIC PACKAGING
„
Ethernet over VDSL2 Converter x1
„
AC-DC Power Adapter (Output: 5V DC, 2A max.)
„
User’s Manual x1
x1
3.9 PACKING INFORMATION
Dimension
140mm x 285mm x 70mm (W x D x H)
Weight
0.53kg (Gross Weight)
20pcs in one canton
Filename: PS-VC-202A_v1.0.doc
Page 8 of 8
Printed on 8/3/2010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement