GE VT/VR6010 Security IFS 4-Channel Video Multiplexer

GE VT/VR6010 Security IFS 4-Channel Video Multiplexer
GE
Security
VT/VR6010
IFS 4-Channel Video Multiplexer
Overview
Standard Features
The IFS VT/VR6010 multiplexer simultaneously transmits
four channels of real-time video signals over one multimode
fiber optic cable. The modules utilize frequency modulation
(FM) to reduce ghosting, jitter and cross-talk between
channels, thereby providing superior video transmission.
Plug-and-play design ensures ease of installation
requiring no electrical or optical adjustments. The modules
incorporate power and carrier detect status indicating LED’s
monitoring proper system operation. The modules
are available in either stand-alone or rack mount version.
• FM Design
• Transmits and Receives Four Real-Time Video Signals
• 10 MHz Bandwidth Per Individual Channel
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Reduces Fiber/Cabling Cost
• No In-field Electrical or Optical Adjustments Required
• Power, Carrier Detect and Four Video Presence Status
Indicating LED’s for Each Individual Channel to Monitor
System Performance
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses on all Power Lines
• Comprehensive Lifetime Warranty
Application Examples
• Installations with Limited Fiber
• Retrofits/System Upgrades
• Conduit with Limited Space for Additional Cabling
4-Channel Video
Multiplexer
Simultaneously transmits 4 channels
of real-time video signals over
one multimode optical fiber.
GE
Security
Specifications
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Video
Video Input: Bandwidth: Differential Gain: Differential Phase: Tilt: Signal-to-Noise Ratio (SNR): 1 volt pk-pk (75 ohms)
10 Hz - 10 MHz (typical)
<5%
<5°
<1%
55 dB (typical)
Wavelength
850 nm, Multimode
Number of fibers
1
Connectors
Optical: Power and Audio:
Video: ST
Terminal Block with Screw Clamps
BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power: Surface Mount:
Rack:
Number of Rack Slots:
Current Protection:
Max. RG59 Cable Length:
Circuit Board:
Size (in./cm.) (LxWxH)
Surface Mount: Rack Mount: Shipping Weight:
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Environmental
MTBF: Operating Temp: Storage Temp: Relative Humidity: VT: 12 VDC @ 400 mA
VR: 12 VDC @ 300 mA
From Rack
2
Automatic Resettable Solid-State Current Limiters
750 ft.
Meets IPC Standard
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
<2 lbs./0.9 kg
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
Agency compliance
System Design
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
4 Video Inputs
(Coax)
VT6010DRDT
up to 1.2 miles
(2 km)
VR6010DRDT
1 Fiber
62.5/125µm MM
4 Video Outputs (Coax)
to monitors or switchers
Control
Data
Control
Data
Ordering Information
PTZ Control
Part Number
Description
Fibers Required Optical Pwr. Budget
Max. Distance*
Multimode
62.5/125µm**
VT6010
VR6010
4 Channel Video Transmitter/Multiplexer (850 nm)
4 Channel Video Receiver/Demultiplexer (850 nm)
1
1.2 miles (2 km)***
Accessories♦
PS-12 VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12 VDC 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
*** This product may be used with 62.5µm graded index multimode fiber having a maximum run length of 2 km and/or a maximum optical loss of 10 dB.
♦
All accessories are third party manufactured.
10 dB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement