Quick Reference Guide (Download PDF, 832KB)

Quick Reference Guide (Download PDF, 832KB)
2014 Infiniti QX50
1378280_14a_Infiniti_QX50_QRG_060613.indd 2
Quick Reference Guide
6/6/13 10:21 AM
01
02
Behind
steering
wheel
Behind
steering
wheel
16
03
04
05
06
07
08
17
09 10
11
On
13 steering
12
18
column
Behind
19
14 15 steering
wheel
INSTRUMENT BRIGHTNESS cONTROL SwITcH*
01 11 DYNAMIC DRIVER ASSISTANCE SWITCH*
02 Trip computer switches
12 INTELLIGENT KEY PORT
03 LOW TIRE PRESSURE WARNING LIGHT
13 TILT / TELESCOPIC STEERING
WHEEL SWITCH*
04 HEADLIGHT AND TURN SIGNAL CONTROL
14 HOOD RELEASE*
05 WINDSHIELD WIPER and WASHER SWITCH
06 STEERING WHEEL SWITCHEs FOR
AUDIO* / BLUETOOTH® / NAVIGATION
15 VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH*
16 CONTROL PANEL DISPLAY SCREEN*
07 INTELLIGENT CRUISE CONTROL BUTTONs
17 AUDIO SYSTEM
08 PUSH BUTTON IGNITION
18 AUTOMATIC CLIMATE CONTROLS
09 WARNING SYSTEMS SWITCH*
10 INTELLIGENT BRAKE ASSIST (IBA)
OFF SWITCH*
19 FRONT PASSENGER AIR BAG
STATUS LIGHT*
*See your Owner’s Manual for information.
1378280_14a_Infiniti_QX50_QRG_060613.indd 3
6/6/13 10:21 AM
table of contents
new system features
Blind Spot Warning (BSW) System (if so equipped) . . . . . . . . . . . . . . . . . . . 2
essential information
Tire Pressure Monitoring System (TPMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Loose Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Fuel-Filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Front Armrest/Center Console Storage Box . . . . . . . . . . . . . . . . . . . . . . . . . . 4
first drive features
INFINITI Intelligent Key System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Liftgate Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Power Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Automatic Drive Positioner (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . 7
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Starting/Stopping the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Headlight Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Windshield Wiper and Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Automatic Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
FM/AM/SiriusXM Satellite Radio with CD/DVD Player
(with Navigation System - if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . 12
USB/iPod® Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Conventional (Fixed Speed) Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . 13
Intelligent Cruise Control (ICC) System (if so equipped) . . . . . . . . . . . . . . 14
Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
system guide
Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Bluetooth® Hands-free Phone System (if so equipped) . . . . . . . . . . . . . . . . . 16
System Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Bluetooth® System with Navigation (if so equipped) . . . . . . . . . . . . . . 17
Bluetooth® System without Navigation (if so equipped) . . . . . . . . . . . 19
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DVD Player (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
HomeLink® Universal Transceiver (if so equipped) . . . . . . . . . . . . . . . . . . 23
• A cellular telephone should not be used for any purpose while
driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat
properly secured in child restraints or seat belts according to
their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)”, “Monitor, climate,
audio, phone and voice recognition systems (section 4)” and the
“Starting and driving (section 5)” of your Owner’s Manual.
Additional information about your vehicle is also available in
your Owner’s Manual, Navigation System Owner’s Manual and
at www.InfinitiUSA.com.
1378280_14a_Infiniti_QX50_QRG_060613.indd 4
To view detailed
instructional videos, go to
www.infinitiownersinfo.mobi/2014/qx50
or snap this barcode with an
appropriate barcode reader.
6/6/13 10:21 AM
n ew sy s t em f e a t u r e s
Blind Spot Warning (BSW) System (if so equipped)
The control switch is located on the left side of the
instrument panel.
The system automatically turns on when the engine
is started and the indicator light on the switch 01
illuminates.
The BSW indicator lights 02 , located next to the
outside mirrors, will activate when the BSW system
detects a vehicle in the detection zone.
01
If the turn signal is activated in the direction of a
detected vehicle, a chime sounds twice and the BSW
indicator light will flash.
To cancel the system, push the control switch and the
warning systems ON indicator will turn off.
For more information, refer to the “Instruments and controls (section 2)” and
the “Starting and driving (section 5)” of your Owner’s Manual.
02
2
1378280_14a_Infiniti_QX50_QRG_060613.indd 2
6/6/13 10:21 AM
e s s e n t i a l i n f or mat ion
Tire Pressure Monitoring System (TPMS)
A Check tire pressure warning message will
appear in the vehicle information display 01
and the low tire pressure warning light 02 will
illuminate when one or more tires are low on
pressure and air is needed.
01
• T he tire pressures should be checked when the
tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more or
driven less than 1 mi (1.6 km) at moderate speeds.
A
fter tire pressures are adjusted, drive the vehicle at
speeds above 16 MPH (25 km/h). The Check tire
pressure warning message and the low tire pressure
warning light will disappear.
02
When the low tire pressure warning light flashes for 1 minute and then remains on, the TPMS
is not functioning properly. Have the system checked by an INFINITI retailer.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the
outside temperature. Low outside temperature can lower the temperature of the air inside
the tire, which can cause a lower tire inflation pressure. This may cause the low tire pressure
warning light to illuminate. If the warning light illuminates, check the tire pressure in your
tires.
• Check the tire pressure (including the spare tire) often and always prior to long distance trips.
The Tire and Loading Information label contains valuable information. Please refer to section 9,
“Technical and consumer information”, in your Owner’s Manual for the location of the Tire
and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, the “Starting and driving (section 5)” and the “Maintenance
and do-it-yourself (section 8)” of your Owner’s Manual.
3
1378280_14a_Infiniti_QX50_QRG_060613.indd 3
6/6/13 10:21 AM
essent i al i n f o r m a t i o n
Loose Fuel Cap
A LOOSE FUEL CAP warning message will appear in
the vehicle information display 01 when the
fuel-filler cap is not tightened correctly.
01
To tighten, turn the cap clockwise until a single click
is heard.
The warning message will disappear when the vehicle
detects the fuel-filler cap is properly tightened and the
reset button 02 is pressed.
If the cap is not properly tightened, the Malfunction
Indicator Light
may illuminate.
02
For more information, refer to the “Instruments and controls (section 2)” and
the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Fuel-Filler Door
Unlock the fuel-filler door using one of the following
operations, then push and release the left side of the
door to open.
Push either door handle request switch or the liftgate
request switch while carrying the INFINITI Intelligent
Key with you.
Press the UNLOCK button on the Intelligent Key.
Push the power door lock switch to the
UNLOCK position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Front Armrest/Center Console Storage Box
To access the center console storage box, push
the button 01 .
01
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
4
1378280_14a_Infiniti_QX50_QRG_060613.indd 4
6/6/13 10:21 AM
f i r s t d r i v e f e at ur e s
INFINITI Intelligent Key System
The INFINITI Intelligent Key System allows you to lock or
unlock your vehicle, open your liftgate and start the engine.
It is important to make sure the Intelligent Key is with you
(that is, in your pocket or purse).
01
The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch 01 or the liftgate request switch 02 or press
the button 03 on the key fob.
02
To unlock the vehicle, perform one of the
following procedures:
• P
ush either door handle request switch 01 or the
liftgate request switch 02 ; the corresponding door will unlock.
Push the door handle request switch 01 or the liftgate request
switch 02 again within 1 minute; all other doors will unlock, or
• P
ress the button 04 on the key fob to unlock the driver’s side
door. Press the button again; all other doors will unlock.
03
The Intelligent Key can also be used to activate the panic alarm by
pressing and holding the button 05 for more than 1 second. Once
activated, the panic alarm and headlights will stay on for a period of time.
04
05
INFINITI INTELLIGENT KEY BATTERY DISCHARGE
If the battery in the Intelligent Key is almost discharged,
the guide light 06 of the Intelligent Key port blinks and
the Intelligent Key insertion indicator 07 is displayed
in the vehicle information display.
To start the engine under these circumstances, insert
the Intelligent Key into the key port with the keyring
side facing backward until it latches into place. Then
push the ignition switch to start the engine.
06
To remove the Intelligent Key from the port, push the
ignition switch to turn the engine off and then pull the
Intelligent Key out of the port.
The Intelligent Key port does not charge the Intelligent
Key battery. If you see the Intelligent Key warning light
08 , replace the battery in the Intelligent Key.
Do not insert the mechanical key or other objects into
the key port because it will damage the key port.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)”, “Starting and driving (section 5)” and the “Maintenance
and do-it yourself (section 8)” of your Owner’s Manual.
07
08
F
E
5
1378280_14a_Infiniti_QX50_QRG_060613.indd 5
6/6/13 10:21 AM
f irst d r i v e f e a t u r e s
Liftgate Release
It is important to make sure the Intelligent Key is with you
(that is, in your pocket or purse).
Use one of the following methods to unlock the liftgate:
button 01 on the INFINITI Intelligent Key twice.
• Press the
• Push the liftgate request switch 02 .
01
To open the liftgate, once unlocked, push the opener
switch 03 located just above the license plate and pull
the opener handle.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
02
03
Power Seat Adjustments
To slide the seat forward or backward, push the control
01 forward or backward.
switch
To recline the seatback, push the switch
forward or backward.
02
01
02
03
SEAT LIFTER (if so equipped for passenger seat)
To adjust the angle of the front portion or height of the
seat, push the front or rear end of the switch
01 up or down.
POWER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the switch
03 .
For more information, refer to the “Safety —— Seats, seat belts and supplemental restraint system (section 1)”
of your Owner’s Manual.
6
1378280_14a_Infiniti_QX50_QRG_060613.indd 6
6/6/13 10:21 AM
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• A
djust the driver’s seat, steering column and outside mirrors to the desired positions using
the adjusting switches for each feature.
• P
ush the SET switch and within 5 seconds, push the memory switch (1 or 2) for at
least 1 second.
• T he indicator light on the memory switch you select will illuminate for approximately
5 seconds.
• The driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligent Key.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, turn the control
switch 01 right or left.
To adjust the mirror angle, move the control switch
01 up, down, right or left.
01
To prevent accidentally moving the mirror, turn and
set the switch to the middle (neutral) position.
REVERSE TILT-DOWN FEATURE (if so equipped)
When backing up the vehicle, the right or left outside mirror can be selected to automatically
turn downward to provide better rear visibility.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3.Choose the right or left outside mirror by operating the outside mirror control switch 01 .
4. The selected outside mirror surface moves downward.
When one of the following conditions has occurred, the outside mirror surface will return to
its original position:
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center (neutral) position.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
7
1378280_14a_Infiniti_QX50_QRG_060613.indd 7
6/6/13 10:21 AM
f irst d r i v e f e a t u r e s
Starting/Stopping the Engine
It is important to make sure the INFINITI Intelligent
Key is with you (that is, in your pocket or purse).
Depress the brake pedal.
• I f the brake pedal is not depressed, pushing the
ignition switch once enters the ACC mode.
• I f the ignition switch is pushed a second time, the
vehicle will enter the ON mode.
Move the shift lever to P (PARK).
Push the ignition switch to start the engine.
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the
position 01 to turn on the front parking, side
marker, tail, license plate and instrument panel
lights. Turn the switch to the
position 02 to turn
on the headlights.
03
01
02
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it is dark and off when
it is light. The system will keep the headlights on for a period of time after you turn the
ignition off and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
01 or
control switch to the OFF,
position 02 .
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
04
05
Pull and release the headlight control switch 05 to
flash the headlight high beams on and off.
8
1378280_14a_Infiniti_QX50_QRG_060613.indd 8
6/6/13 10:21 AM
FOG LIGHT SWITCH
The headlights must be in the auto, or the low
beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
to turn the fog lights on.
position 06
06
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Windshield Wiper and Washer Switch
Move the lever to the following positions to operate
the windshield wipers:
01 Mist (MIST) - One sweep operation of the
front wipers.
03
MIST 01
OFF
02 Intermittent (INT) - Operates the speed-sensing
front wipers intermittently. The intermittent
operation speed can be adjusted by twisting
the time control ring 03 towards you to
decrease wiper delay.
INT 02
LO 04
HI 05
04 Low (LO) - Front wipers operate at a continuous
low-speed.
05 High (HI) - Front wipers operate at a continuous
high-speed.
06 Front Washer
- Pull the lever toward you to
activate the front washer. The front wipers will
operate several times.
06
09
REAR WINDSHIELD WIPER AND WASHER
07 Intermittent (INT) - Rear wiper operates
intermittently.
08 Low (ON) - Rear wiper operates at a continuous
low-speed.
07
INT
08
ON
09 Rear Washer
- Push the lever forward to
activate the rear washer. The rear wiper will
operate several times.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
9
1378280_14a_Infiniti_QX50_QRG_060613.indd 9
6/6/13 10:21 AM
f i rst dr i v e f e a t u r e s
08
05
04
03
01
02
09
06
07
Automatic Climate Controls
01 AUTO BUTTON/DRIVER’S SIDE TEMPERATURE CONTROL DIAL
The auto mode may be used year-round. Press the AUTO button to turn the system on
and the system will automatically control the inside temperature (automatic cooling and/
or dehumidified heating), air flow distribution and fan speed.
Turn the driver’s side temperature control dial to the left for cooler air or right for warmer air.
02 DUAL BUTTON/PASSENGER’S SIDE TEMPERATURE CONTROL DIAL
Press the DUAL button to turn the passenger’s side temperature controls on or off. This
will allow the passenger’s side temperature to be adjusted independently from the
driver’s side by turning the passenger’s side temperature control dial.
Turn the passenger’s side temperature control dial left for cooler air or right for warmer air.
03 FAN SPEED CONTROL BUTTONS
To manually adjust the fan speed, press the top
button to increase the fan speed or
press the bottom
button to decrease the fan speed.
04 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
to turn the system on. The A/C automatically turns
Press the defroster control button
on when the defroster mode is selected. This feature removes humidity from the air.
Turn the temperature control dial 01 to set the desired temperature.
To defrost the front and side windows quickly, set the temperature controls and fan speed
controls to their maximum settings.
05 MODE BUTTON
Press the MODE button to cycle through the following air flow outlets:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
06 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch
This function automatically turns off after approximately 15 minutes.
to turn the system on or off.
10
1378280_14a_Infiniti_QX50_QRG_060613.indd 10
6/6/13 10:21 AM
07 INTAKE AIR CONTROL BUTTON
AIR RECIRCULATION
Press the intake air control button to recirculate interior air inside the vehicle. The indicator
side will come on. This system is used to avoid outside odors and helps to
light on the
adjust the inside vehicle temperature more effectively.
The air recirculation mode cannot be activated when the air conditioner is in the front
defrosting mode
or front defrost and foot vent mode .
OUTSIDE AIR CIRCULATION
Press the intake air control button again to draw outside air into the passenger
compartment. The indicator light on the
side will come on.
AUTOMATIC INTAKE AIR CONTROL
In the auto mode, the intake air will be controlled automatically. To manually control the
intake air, press the intake air control button. To return to the automatic control mode,
press the intake air control button for about 2 seconds.
08 A/C BUTTON
Press the A/C button to turn the air conditioner system on or off. This system helps cool
and dehumidify the air inside the cabin and defog the windows.
09 OFF BUTTON
Press the OFF button to turn the climate control system off.
For more information, refer to the “Instruments and controls (section 2)” and the “Monitor, climate, audio, phone and voice recognition
systems (section 4)” of your Owner’s Manual.
11
1378280_14a_Infiniti_QX50_QRG_060613.indd 11
6/6/13 10:21 AM
f irst d r i v e f e a t u r e s
05
02
01
03
04
FM/AM/SiriusXM* Satellite Radio with CD/DVD Player
(with Navigation System - if so equipped)
01 VOLUME/ON•OFF CONTROL KNOB
Press the VOL/ON•OFF control knob to turn the system on or off. Turn the knob right or left
to increase or decrease the volume.
02 SEEK•CAT AND TRACK BUTTONS
To scan quickly through each broadcasting station, press the SEEK•CAT button or the
TRACK button to stop at the previous or next broadcast station.
For SiriusXM Satellite Radio, press the SEEK•CAT button or the TRACK button to switch to
the first channel of the previous or next category.
Press the SEEK•CAT button or the TRACK button to change tracks on a CD.
Press and hold the SEEK•CAT button or the TRACK button to fast forward or rewind a
track on a CD.
03 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the TUNE/FOLDER/AUDIO knob left or right.
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eighteen for
SiriusXM Satellite Radio.
To store a station in a preset, you must first select a radio band by pressing the
AM•FM/SAT button 05 , then tune to the desired AM, FM or SiriusXM Satellite Radio
station.
Then press and hold the desired station preset button (1-6) until the preset number
is updated on the display and the sound is briefly muted. The channel indicator will then
display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the preset was stored,
then press the corresponding station select button (1-6).
*SiriusXM Satellite Radio is only available on vehicles equipped with optional SiriusXM Satellite Radio subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
12
1378280_14a_Infiniti_QX50_QRG_060613.indd 12
6/6/13 10:21 AM
USB/iPod® Interface
The USB jack 01 is located in the center console
under the armrest.
When a compatible USB memory device or iPod® is
plugged into the USB jack, compatible audio and
video files stored on the device can be
played through the vehicle’s audio system
and front display.
For more information, refer to the “Monitor, climate, audio,
phone and voice recognition systems (section 4)” of your
Owner’s Manual.
01
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 MPH (40 km/h).
04
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/
OFF switch 01 . The CRUISE indicator light in the
instrument panel will illuminate.
03
02
01
To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/
SET switch 02 and release. The CRUISE SET indicator light in the instrument panel will
illuminate. Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03 . When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02 . Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANCEL switch 04 .
To turn off cruise control, push the ON/OFF switch 01 . Both the CRUISE indicator light and
the SET indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
13
1378280_14a_Infiniti_QX50_QRG_060613.indd 13
6/6/13 10:21 AM
f i rst dr i v e f e a t u r e s
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
08
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button 01 for less
than 1.5 seconds. The CRUISE indicator light 02
will illuminate.
07
03
01
Accelerate to the desired speed.
Push down on the COAST/SET switch 03 and release
it. Cruise control will be set to the desired speed.
Press the distance button 04 repeatedly to change
the set distance between long, middle, and short.
04
When a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate 05 in set mode.
When a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance, and set
vehicle speed indicator lights will illuminate 06 in set mode.
02
To reset at a faster cruising speed, push up and hold the ACCEL/RES
switch 07 . When the vehicle attains the desired speed, release
the switch.
05
06
To reset at a slower cruising speed, push down and hold the COAST/SET switch 03 . Release
the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 08 or tap the brake pedal. The set
vehicle speed indicator 05 will go out.
To turn off cruise control, press the CRUISE ON/OFF button 01 . The CRUISE indicator
light 02 , in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:
While cruise control is off, press the CRUISE ON/OFF button 01 and hold it down for more
than 1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off, and then turn it on
again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
14
1378280_14a_Infiniti_QX50_QRG_060613.indd 14
6/6/13 10:21 AM
Power Outlets
T he power outlets are used for powering electrical
accessories such as cellular telephones. They are
rated at 12 volt, 120W (10A) maximum.
01
Power outlets are located on the instrument panel
01 and inside the center console 02 .
To use a power outlet, open the cap.
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
02
15
1378280_14a_Infiniti_QX50_QRG_060613.indd 15
6/6/13 10:21 AM
syste m g ui d e
Trip Computer
When the
button 01 is pressed, the following
modes will appear on the vehicle information
display 02 :
• M
PG – Displays the current and average fuel
consumption since the last reset.
• M
PG/MPH – Displays the average fuel consumption
and speed since the last reset.
• T IME/MILES – Displays the elapsed time and total
distance the vehicle has been driven since the
last reset.
01
03
02
• R
ANGE – Displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
• O
UTSIDE TEMP – Displays the exterior air
temperature including a low temperature warning feature.
• S
ETTING – Allows you to set reminders for alerts and maintenance intervals or change the
language and units used in the system.
— Press the
— Press the
button 03 to cycle through the various setting modes.
button 01 to choose the selected menu.
• WARNING – This is available when a warning is present.
Press the
button 03 for approximately 1 second to reset the currently displayed trip
odometer to zero.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System (if so equipped)
A cellular telephone should not be used
while driving so full attention may be given to
vehicle operation.*
SYSTEM OPERATING TIPS
Bluetooth® Controls
T he “Help” command can be used to hear a list of
available commands at any time.
R
educe background noise as much as possible by
closing windows and pointing HVAC vents away
from the ceiling.
S
ay commands after the tone, or press the
button to say a command at any time.
Speak naturally without long pauses and without
raising your voice.
*Some jurisdictions prohibit the use of cellular telephones while driving.
16
1378280_14a_Infiniti_QX50_QRG_060613.indd 16
6/6/13 10:21 AM
When speaking Phonebook names, please be aware
some phones require the last name to be spoken
before the first name. For example, “Michael Smith”
may be spoken as “Smith Michael”.
T o cancel a voice recognition session, simply wait 5
seconds, say “Cancel” or “Quit”, or press and hold
the button for 5 seconds.
Microphone
T o increase or decrease the volume of the voice prompts,
push the volume control switches or on the steering wheel or turn the VOL/ON•OFF
control knob on the audio system while the system is responding.
I f the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
F or more detailed information and instructions, refer to your cellular phone Owner’s Manual
and visit www.InfinitiUSA.com/bluetooth.
Bluetooth® System with Navigation* (if so equipped)
CONNECTING PROCEDURE
The vehicle must be stationary when connecting
the phone.
1. Press the
button and select the “Connect Phone” key.
2. Initiate connecting from the phone.
• The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
• W
hen prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned by
INFINITI and cannot be changed.)
3.When the connecting is complete, the screen will return to the Phone menu display.
*Some jurisdictions prohibit the use of cellular telephones while driving.
17
1378280_14a_Infiniti_QX50_QRG_060613.indd 17
6/6/13 10:22 AM
syste m g ui d e
PHONEBOOK SETUP
D
epending on your cell phone, the system may automatically download your cell phone’s
entire phonebook to the vehicle’s Bluetooth system.
If the phonebook does not download automatically, the vehicle phonebook may be set for up
to 40 entries.
To manually download entries:
1.Press the
button and select the “Quick Dial” key.
2.Select the “Add New” key at the top of the display.
There are different methods to input a phone
number. Select one of the following options:
• “ Copy from Call History” to save a number from
the Outgoing, Incoming or Missed Calls lists.
• “Copy from the Phonebook” to save a number
that has been downloaded from your handset to
the vehicle.
• “ Enter Number by Keypad” to input the number
and name manually.
CALLING A PHONEBOOK ENTRY:
1. Press the
button.
2. After waiting for the tone, say “Phone”.
3. After the tone, say “Phonebook” or “Quick Dial” to select the desired phonebook.
4. After the tone, say the name of the person as shown on the vehicle’s display of the
phonebook. Depending on the phone, the last name of the contact may need to be spoken
before the first name.
MAKING A CALL:
1. Press the
button.
2. After waiting for the tone, say “Phone”.
3. After the next tone, say “Dial Number”.
4. After the next tone, say “123-456-7891”. You may also say the digits in groups of 3, 3 and 4,
respectively. To use this group dialing method, say only the first 3 digits of the phone number
instead of all 10 digits. After the system recognizes the number, it will request the next 3 digits
and finally the last 4 digits.
5. After the system speaks the correct number and sounds the tone, say “Dial”.
18
1378280_14a_Infiniti_QX50_QRG_060613.indd 18
6/6/13 10:22 AM
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering
wheel or touch the “Answer” key. To reject the call,
touch the “Reject Call” key.
To hang-up, press the
“Hang Up” key.
button or touch the
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROCEDURE
1. Press the
button on the steering wheel.
The system announces the available commands.
2.Say “Connect Phone”. The system acknowledges
the command and announces the next set of
available commands.
3.Say “Add Phone”. The system acknowledges the
command and asks you to initiate connecting from the
phone handset.
4. Initiate pairing from the phone.
• T he connecting procedure varies according to each cellular phone model.
For detailed connecting instructions and a list of compatible phones, please
visit www.InfinitiUSA.com/bluetooth.
hen prompted for a PIN code, enter “1234” from the handset. (The PIN code is assigned
• W
by INFINITI and cannot be changed.)
5.The system asks for a name for the phone. Say “Yes”. The system acknowledges the command
and registers the cellular phone.
PHONEBOOK
D
epending on the phone, the system may automatically download the entire phonebook. For
more information, please visit www.InfinitiUSA.com/bluetooth or the phone’s user guide.
If the phonebook does not download automatically, 40 entries can be individually downloaded.
To manually download entries:
1. Press the
button on the steering wheel
2. After the tone, say “Phonebook”.
3. After the next tone, say “Transfer Entry”.
*Some jurisdictions prohibit the use of cellular telephones while driving.
19
1378280_14a_Infiniti_QX50_QRG_060613.indd 19
6/6/13 10:22 AM
s yste m g u i d e
4. Using the phone, select an entry to send to the vehicle. Please consult the website above or
your phone’s user guide for specific steps of the phone.
5. The system will speak the transferred entry. Confirm the entry by saying “Yes” after the tone.
CALLING A PHONEBOOK ENTRY:
In some cases, names stored using all UPPERCASE letters may not be recognized by the voice
recognition system.
1. Press the
button.
2. After waiting for the tone, say “Call”.
3. After the next tone, speak a name of a phonebook entry. For example “Michael Smith”.
4. Confirm the correct name is recognized by saying “Dial” after the tone.
MAKING A CALL:
1. Press the
button.
2. After waiting for the tone, say “Call”.
3. After the next tone, say “Phone Number”.
4. After the next tone, say “123-456-7890”.
You may also say the digits in groups of 3, 3 and 4, respectively. To use this group dialing
method, say only the first 3 digits of the phone number instead of all 10 digits. After the
system recognizes the digits, it will request the next 3 digits and finally the last 4 digits.
5. After the system speaks the correct number and sounds the tone, say “Dial”.
RECEIVING/ENDING A CALL
T o accept the call, press the
To reject the call, press the
To hang-up, press the
button on the steering wheel.
button.
button.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual
or please visit www.InfinitiUSA.com/bluetooth.
20
1378280_14a_Infiniti_QX50_QRG_060613.indd 20
6/6/13 10:22 AM
01
02
04
09
05
03
07
06
10
08
11
12
13
Navigation System (if so equipped)
Your Navigation System can calculate a route from the current location to a preferred destination.
The real-time map display and turn-by-turn voice guidance will lead you along the route.
The Navigation System will continually update your vehicle’s position. If you have deviated
from the original route, it will recalculate the route from your current location.
01 Touch screen display
02 DEST button – Press to enter a destination.
03 STATUS button – Press multiple times to display audio information with either the air
conditioner status, fuel economy or navigation directions.
04 ZOOM OUT button – Press to zoom the map out.
05 ROUTE button – Press to access the guidance control functions (guidance cancellation, route
priority, waypoint setting on the route, etc.).
06 INFINITI Controller
• E NTER button – Press to select the highlighted item on the screen. If this button is
pressed while a map is displayed, the map menu screen is displayed.
• M
ain directional buttons – Use to move across the map, highlight an item on the screen or
adjust a setting (volume, brightness, etc.).
• A
dditional directional buttons – Use to move across the map or highlight an item on the
character input screen.
• C
enter dial – Use to highlight an item on the screen or adjust a setting. The center dial can
also be used to adjust the map scale.
21
1378280_14a_Infiniti_QX50_QRG_060613.indd 21
6/6/13 10:22 AM
s yste m g u i d e
07 INFO button – Press to display the vehicle (if so equipped), weather (if so equipped) or voice
recognition information.
08 button – Press to switch between the day screen (bright) and the night screen (dark).
Press and hold to turn off the display. Press again to turn on the display.
09 ZOOM IN button – Press to zoom the map in.
10 MAP button – Press to display the map. While following a programmed route, press multiple
times to change the type of route information displayed.
11 SETTING button – Press to access the system settings.
12 BACK button – Press to return to the previous screen. In a settings screen, this button is also
used to apply the setting. In a character input screen, this button is also used to delete the
characters that have been entered.
13 VOICE button – Press to hear the current guidance for a programmed route.
For more information, please refer to your Navigation System Owner’s Manual.
DVD Player (if so equipped)
With this DVD Player, you can play video files via a
DVD or CD from the front display.
To view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the P (PARK)
position and apply the parking brake.
To reduce driver distraction, movies will not be
shown on the front display while the vehicle is in
any drive position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
22
1378280_14a_Infiniti_QX50_QRG_060613.indd 22
6/6/13 10:22 AM
HomeLink® Universal Transceiver
The HomeLink® system can learn and consolidate
the functions of up to 3 different hand-held
transmitters, operating items such as garage doors,
property gates, outdoor and indoor lights or
alarm systems.
HOMELINK®
To program the Homelink® Universal Transceiver:
• P
osition the handheld transceiver 1-3 in (26-76
mm) away from the Homelink® surface, keeping the Homelink® indicator light in view.
• P
ress and hold the desired Homelink® button and the handheld transmitter button
simultaneously until the Homelink® indicator light flashes slowly and then rapidly.
• Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the Homelink® and observe the
indicator light:
• A
solid continuous light indicates the programing is complete and the Homelink® button
will activate your device.
• A
blinking light that turns to a solid continuous light after 2 seconds indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:
• A
t the receiver of the device that you are programing to the Homelink®, press and
release the “learn” or “smart” button (the name may vary by manufacturer but it is
usually located near where the hanging antenna wire is attached to the unit). You have
approximately 30 seconds to initiate the following step.
• Press and hold the programmed Homelink® button for 2 seconds and release.
Repeat the previous 2 steps up to 3 times to complete the programming process.
Homelink® should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
23
1378280_14a_Infiniti_QX50_QRG_060613.indd 23
6/6/13 10:22 AM
memo
1378280_14a_Infiniti_QX50_QRG_060613.indd 24
6/6/13 10:22 AM
me mo
1378280_14a_Infiniti_QX50_QRG_060613.indd 25
6/6/13 10:22 AM
Printing: July 2013 (07) / QR14E 0J50U0 / Printed in USA
To view detailed instructional videos,
go to www.infinitiownersinfo.mobi/2014/qx50
or snap this barcode with an appropriate
barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the unique features
of your new vehicle. See your Owner’s Manual, which contains important safety warnings and
information about the operation and maintenance of your vehicle, for complete details. Nissan
North America, Inc. reserves the right to make changes, at anytime, without prior notice, in prices,
colors, materials, equipment, specifications, and models and to discontinue models or equipment.
Due to continuous product development and other pre- and post-production factors, actual vehicle,
materials and specifications may vary. Some vehicles are shown with optional equipment. See
the actual vehicle for complete accuracy. Specifications, options and accessories may differ in
Hawaii, U.S. territories and other countries. For additional information on availability, options or
accessories, see your INFINITI retailer or contact Nissan North America, Inc.
1378280_14a_Infiniti_QX50_QRG_060613.indd 1
6/6/13 10:21 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement