0RGHO 5HSODFHDEOH7LS3UHFLVLRQ(OHFWURQLF3UREH

0RGHO 5HSODFHDEOH7LS3UHFLVLRQ(OHFWURQLF3UREH
0RGHO
5HSODFHDEOH7LS3UHFLVLRQ(OHFWURQLF3UREH
Standard Sheathed Banana Plug
Nominal .166" (4,21mm)
0$7(5,$/6
)($785(6
Probe Body: Insulation - Gray Santoprene®
x Miniature probe is the perfect size for probing
Rubber over Polypropylene.
tiny, high-density circuits.
Right Angle Sheath Banana Plug:
x Gold plated pogo pin tip keeps constant
Plug Body: Nickel Plated Brass.
pressure on test point for consistent readings.
Banana Plug Spring: Nickel Plated Beryllium
x Replaceable probe tips.
Copper.
x Safety design complies with all the latest
Insulation: Santoprene®
standards.
Wire: 20 AWG, gray silicon rubber 0.089 (2,26mm)
x Flexible Silicone insulated wire resists burning.
O.D.
x Wear indication with double insulated (dual
Probe Tips: Gold plated or Stainless Steel
extruded) silicone leads shows black inner layer
for increased safety
5$7,1*6
Operating Voltage: IEC 61010-031 CAT II 1000 Vrms Max. For CE compliance: The 3” (76,19mm) Long Sharp Point
Stainless Steel Tip is not intended for hand-held use at voltage above 30 Vrms/42.4Vpk/60Vdc.
Current: 3 Amperes
25'(5,1*,1)250$7,21
Model: 6341
(one red probe, one black probe with a set of all tip styles)
Model: 6342
(one red probe, one black probe with model 6210 sharp point gold pogo pin tips)
Model: 6275
(one red probe, one black probe with model 6213 sharp point stainless steel tips)
Model: 6354
(replacement tips only, set of all tips)
Distributed by: All-Spec, a Hisco Subsidiary
Ph: 800-537-0351 Email: [email protected]
Fx: 800-379-9903 Web Site: www.all-spec.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2012
D1094722, D1094672, D1094674 Rev. 101
Page 1 of 1
4/22/2014
RoHS CERTIFICATION LETTER
®
Apr 22, 2014
To:
CUSTOMERS & DISTRIBUTORS OF PRODUCTS MANUFACTURED
BY POMONA ELECTRONICS
RE:
RoHS CERTIFICATION LETTER FOR POMONA PRODUCT #6341
The Pomona Model 6341
No component of the Pomona #6341 product contains any material restricted by
‘2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of Certain Hazardous Substances in Electrical and Electronic
Equipment recast (RoHS-2).’ If the product contains leaded brass, it does not exceed
4% by weight of the brass. Therefore, this brass is exempt per the RoHS-2 directive’s
annex listing exempted materials ‘as a copper alloy containing up to 4% lead by weight’.
In addition, certain Pomona products are exempt from RoHS-2 requirements and are,
therefore, in compliance.
If you have any questions about this certification, please contact:
Pomona Electronics
Grace E. Giorgio
Environmental, Health and Safety Manager
P.O. Box 9090, MS 170
Everett, WA 98206
Phone 425-446-5317
Fax 425-446-5164
Pomona Electronics / P.O. Box 9090, MS203A / Everett, WA 98206-9090 / 425-446-5437 / FAX 425-446-5117
http://www.pomonaelectronics.com/docs/ROHS_Cert.php?model=6341
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement