Catalogue Sheet: 12ESL

Catalogue Sheet: 12ESL
Project/Location:
Contractor:
12ESL-EX Series
Date:
High Capacity Combination Unit
Features
Typical specifications
• Standard 120/347Vac input
Supply and install the Emergi-Lite® 12ESL-EX Series “Exit” a unit
that combines an illuminated LED Exit Sign with an emergency light
battery unit. The housing and faceplate shall be constructed of steel.
The faceplate shall come standard with knockout chevrons. The light
source for the Exit Sign shall be LED. The LED lamps shall provide
illumination in normal and emergency operation. Red LEDs shall be
of ALINGAP technology. The charger board, the battery and the LEDs
shall be contained in a single housing. A diffuser optimized for LEDs
shall be mounted behind the legend to provide the 6” high by 3/4”
stroke letters with even illumination. The unit shall include a test
switch and high charge pilot light. The equipment shall be designed
to furnish exit illumination from the normal AC source. When a power
failure occurs, the Exit Sign along with the emergency heads shall
illuminate for a minimum of 30 minutes. The power available for
emergency lights shall be at least 110W or as otherwise specified. The
heads shall require no tools to aim and shall be as specified. The Exit
Sign shall be CSA-C860 approved and meets CSA 22.2 No. 141.
The equipment shall be Emergi-Lite® Model:
.
• Wide range of lamp heads available
• Solid-state pulse-type charger standard
• Sealed dust-proof transfer relay
• Auto-diagnostic charger available (110W only)
• Meets or exceeds CSA 22.2 No. 141.
Dimensions
137/8” [35.3 cm]
101/4” [26 cm]
161/8” [41 cm] up to 144W
231/8” [59 cm] 250W and 360W
161/8” [41 cm]
Dimensions are approximate and subject to change.
exit
Prepared by:
51/2” [13.8 cm]
Wire guards
51/2” [13.8 cm]
460.0081-E
460.0034-E
POwer consumption and unit rating
Model
*Housing width is 231/8 for 250W and 360W capacity only (cabinet C). For more information
please consult your sales representative
Wattage Capacity
AC Specs
Exit Sign Module
12ESL110
12ESL144
12ESL250
12ESL360
Less than 2W
0.25/0.10 A
0.25/0.10 A
0.45/0.15 A
0.45/0.15 A
120/347VAC
Wall Mount 110W and 144W
Wall Mount 250W and 360W
30min
1h00
1h30
2h00
4h00
110
144
250
360
64
84
144
210
45
60
100
150
36
48
83
120
18
24
42
60
ordering information
Series, voltage
and wattage
12ESL110= 12V - 110W
12ESL144= 12V - 144W
12ESL250= 12V - 250W
12ESL360= 12V - 360W
colour
Blank= factory
white
B= black
lettering
voltage
options
EX= EXIT
Blank=
120/347Vac
2= 277Vac
Blank= n
o options
U= autodiagnostics
(110W only)
EXAMPLE: 12ESL110EX/2M
52
# of
heads
/0= no
heads
/1= one
head
/2= two
heads
/3= three
heads
heads style and wattage
Blank= large tungsten, 12V-9W, wedge base
-18= large tungsten, 12V-18W, wedge base
-25= large tungsten, 12V-25W, DCB
150MK= MR16 Deco head EF150, 12V-12W
150MA= MR16 Deco head EF150, 12V-20W
150MB= MR16 Deco head EF150, 12V-35W
150MC= MR16 Deco head EF150, 12V-50W
LG= MR16 LED, 12V-4W
LI= MR16 LED, 12V-5W
LJ= MR16 LED, 12V-6W
H= large halogen, 12V-8W, quartz sealed beam
H12= large halogen, 12V-12W, quartz sealed beam
M= mini tungsten, 12V-9W, wedge base
M18= mini tungsten, 12V-18W, wedge base
MQ= mini halogen, 12V-8W, quartz bi-pin
MQ12= mini halogen, 12V-12W, quartz bi-pin
MK= MR16 halogen, 12V-12W
MA= MR16 halogen, 12V-20W
Q= large halogen, 12V-8W, quartz bi-pin
Q12= large halogen, 12V-12W, quartz bi-pin
Q20= large halogen, 12V-20W, quartz bi-pin
Q55= large halogen, 12V-55W, quartz bi-pin
S12= large tungsten, 12V-12W, sealed beam
S18= large tungsten, 12V-18W, sealed beam
S25= large tungsten, 12V-25W, sealed beam
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement