View detail for AT88CK440RED Getting Started Guide

View detail for AT88CK440RED Getting Started Guide
Atmel CryptoAuthentication Evaluation Kit
Atmel AT88CK440RED
Getting Started Guide
Features
Contents
• Installing Atmel CryptoAuthentication Utilities
• Atmel AT88CK440RED USB Dongle
• Powering the board
• Quick Start Guide
• Reading the Device Configuration Information
Atmel AT88SA102S device
Introduction
Atmel® AT88CK440RED is an Atmel CryptoAuthentication Evaluation Kit, which can be used as a reference
design for an USB application requiring the Atmel CryptoAuthentication product family.
Figure 0-1.
Atmel AT88CK440RED Evaluation Kit
8725A–SMEM–09/10
1.
2.
Install the Atmel CryptoAuthentication Utilities
•
Visit www.atmel.com/cryptokits to download and install the latest Atmel® CryptoAuthentication
Utilities
•
Scroll down the webpage to Software Files and select the software icon for:
CryptoAuthentication Firmware AT88CK440RED Version x.x
Powering up the board
The Atmel AT88CK440RED is a USB powered Device.
•
Simply insert the board into an open USB port
Figure 2-1.
Atmel AT88CK440RED USB device
Power LED
3.
Reading the Device Configuration Information
•
Insert the Atmel AT88CK440RED into a USB port
•
Launch the Atmel CryptoAuthentication Utilities
•
Click Start, All Programs, Atmel Crypto Solutions, CryptoAuthentication Utilities
Figure 3-1.
2
Atmel CryptoAuthentication Utilities
Atmel AT88CK440RED Quick Start Guide
8725A–SMEM–09/10
The Atmel® CryptoAuthentication Utilities will open to the AT88SA102S / Hardware Operation tab.
Figure 3-2.
Hardware Operations Tab
If the following screen appears, then one of two problems exists.
1. Atmel AT88CK440RED has not been inserted into a USB port
− The enumeration process must be completed prior to launching the utility
2. The firmware is outdated
− See Section 4, “Firmware Upgrade”
Figure 3-3.
Incorrect Firmware Version Error Message
Atmel AT88CK440RED Quick Start Guide
8725A–SMEM–09/10
3
• Click the Read button in the AT88SA102S Configuration Information section
The section will populate
Figure 3-4.
Atmel AT88SA102S Configuration Information populated
Congratulations, your Atmel AT88CK440RED is up and running.
See the CryptoAuthentication Help shortcut on your desktop for additional information.
For additional samples, go to: http://www.atmel.com/forms/Samples.asp?family_id=699
4
Atmel AT88CK440RED Quick Start Guide
8725A–SMEM–09/10
4.
Firmware Upgrade
To upgrade the firmware, click the Help tab and complete steps one through six.
The following steps enable the DFU mode:
1.
2.
3.
4.
5.
6.
Load the Atmel FLIP (FLexible In-System) Programming utility
http://www.atmel.com/dyn/products/tools_card_v2.asp?tool_id=3886
Click the Firmware upgrade mode Enable button
Click OK in the popup box
Both LEDs will light indicating the board is in DFU mode
Launch FLIP to load the new firmware
Figure 4-1.
Device Firmware Upgrade Mode
Atmel AT88CK440RED Quick Start Guide
8725A–SMEM–09/10
5
5.
References and further information
A complete reference design including schematics, Gerber files, bill of materials (BOM), Hardware User
Guide and development and demonstration software is conveniently downloadable from the Atmel®
website at www.atmel.com/cryptokits.
6.
EVALUATION BOARD/KIT IMPORTANT NOTICE
This evaluation board/kit is intended for ENGINEERING, DEVELOPMENT, DEMONSTRATION or
EVALUATION PURPOSE ONLY. It is not a finished product and may not (yet) comply with some or
any technical or legal requirements that are applicable to finished products, including, without limitations,
directives regarding electromagnetic compatibility, recycling (WEEE), FCC, CE or UL (except as may be
otherwise noted on the board/kit). Atmel® supplied this board/kit “AS IS,” without any warranties, with
all faults, at the buyer’s and further users’ sole risk. The user assumes all responsibly and liability for
proper and safe handling of goods. Further, the user indemnifies Atmel from claims arising from the
handling or use of goods. Due to open construction of the product, it is the user’s responsibility to take
any and all appropriate precautions with regard to electrostatic discharge and any other technical or legal
concerns.
EXCEPT TO THE EXTENT OF INDEMNITY SET FORTH ABOVE, NEITHER USER NOR ATMEL SHALL BE
LIABLE TO EACH OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
No license is granted under any patent right or other intellectual property right of Atmel covering or
relating to any machine, process, or combination in which such Atmel product or services might be or are
used.
Mailing Address: Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
6
Atmel AT88CK440RED Quick Start Guide
8725A–SMEM–09/10
Product Contact
Product Line
[email protected]
Sales Contact
www.atmel.com/contacts
Atmel Corporation
Atmel Asia Limited
Atmel Munich GmbH
Atmel Japan
2325 Orchard Parkway
Unit 01-5 & 16, 19F
Business Campus
9F, Tonetsu Shinkawa Bldg.
San Jose, CA 95131
BEA Tower, Millennium City 5
Parkring 4
1-24-8 Shinkawa
USA
418 Kwun Tong Road
D-85748 Garching b. Munich
Chuo-ku, Tokyo 104-0033
Tel: (+1)(408) 441-0311
Kwun Tong, Kowloon
GERMANY
JAPAN
Fax: (+1)(408) 487-2600
HONG KONG
Tel: (+49) 89-31970-0
Tel: (+81)(3) 3523-3551
www.atmel.com
Tel: (+852) 2245-6100
Fax: (+49) 89-3194621
Fax: (+81)(3) 3523-7581
Fax: (+852) 2722-1369
© 2010 Atmel Corporation. All rights reserved. / Rev.: 8725A−SMEM−09/10
Atmel®, logo and combinations thereof, CryptoAuthentication™ and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other
terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in
connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS
ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel
makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without
notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel
products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement