BLSO Update_Upgrade Manual Instructions


Add to my manuals
3 Pages

advertisement

BLSO Update_Upgrade Manual Instructions | Manualzz

UPGRADING YOUR MACHINE’S SOFTWARE

UPGRADING YOUR MACHINE’S SOFTWARE

You can use USB media or a computer to download software upgrades for your sewing machine.

When an upgrade program is available on “www.babylock.com”, please download the files following the instructions on the website and steps below.

Note

• When using USB media to upgrade the software, check that no data other than the upgrade file is saved on the USB media being used before starting to upgrade.

Upgrade Procedure Using USB

Media

a

While pressing the “Automatic Threading” button, turn the main power to ON.

→ The following screen will appear on the LCD.

c

Insert the USB media into the primary (top)

USB port on the machine. The media device should only contain the upgrade file.

b

Press .

a Primary (top) USB port for media b USB media

Note

• The access lamp will begin blinking after inserting USB media, and it will take about 5 to 6 seconds to recognize the media. (Time will differ depending on the USB media).

7

331

332

UPGRADING YOUR MACHINE’S SOFTWARE d

Press .

Upgrade Procedure Using

Computer

a

While pressing the “Automatic Threading” button, turn the main power to ON.

o The following screen will appear on the LCD.

b

Press .

o The upgrade file is downloaded.

Note

• If an error occurs, a red text error message will appear. When the download is performed successfully, following message will appear.

e

Remove the USB media, and turn the machine off and on again.

c

Plug the USB cable connector into the corresponding USB ports for the computer and for the machine.

o “Removable Disk” will appear in “Computer (My computer)”.

d

Copy the upgrade file to “Removable Disk”.

o The following message will appear.

UPGRADING YOUR MACHINE’S SOFTWARE e

When the message disappears, press

.

o The upgrade file is downloaded.

Note

• If an error occurs, a red text error message will appear. If the download is performed successfully, following message will appear.

f

Unplug the USB cable, and turn the machine off and on again.

7

333

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement