Specification
Model: VIS200E-2/XV200B-2
Picture Type:
Image Sensor:
Colour
VIS200E-2:
Sony 1/3” Super HAD CCD
XV200B-2:
Panasonic 1/4” Super HAD CCD
DSP:
Resolution:
Lens Viewing Angle:
VIS200E-2: Xvision IXC1
XV200B-2: Xvision XC1
VIS200E-2: 480TVL
XV200B-2: 420TVL
VIS200E-2: 78°
XV200B-2: 60°
3.6mm
Lens Size:
Infra Red Nightvision:
Minimum Illumination:
No
VIS200E-2: 0.1
XV200B-2: 0.5
Audio:
Operating Voltage:
No
12V DC 80mA
Suggested Power Supply: 12V DC 300mA Regulated
Mounting: Wall/Ceiling
Weatherproofing Yes
Dimensions Ø22 x 66mm
CCTV
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your local distributor.
LIMITED WARRANTY:
This product is supplied with a 2 Year warranty. The Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.
Manufactured exclusively for:
Xvision (Europe) Group,
Head Office: London, U.K.
Web: www.x-vision.co.uk
CCTV
Model:
VIS200E-2
Colour Internal/External
Bullet Camera
Model:
XV200B-2
Colour Internal/External
Bullet Camera
Before you begin
•
Please unpack the box carefully and identify that all the parts are present.
The camera is suitable for indoor or outdoor use. Please bear in mind the following points when choosing a mounting position.
•
The camera must be positioned so that it will not point directly into the sun (sunrise and sunset) or any bright light, as this may cause damage to the camera.
•
Avoid viewing areas where half the area is in bright sunlight and the other half is dark, such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with such a large lux level variation.
•
Do not open the camera housing. This will void the warranty and break the warranty seal inside the camera.
•
Do not cut the camera cables, this will void the warranty.
•
Make sure you use only the recommended power supply. Damage caused to the camera by incorrect voltage or wiring is not covered by the warranty.
Mounting Options
Model:
VIS200E-2/XV200B-2
Colour Internal/External
Bullet Cameras
Wall
Mount
Ceiling
Mount
Thank you for purchasing this Xvision camera. Before operating this product, please read this instruction manual carefully.
1. Safety Precautions
When in use please avoid direct contact with eyes and do not touch the camera body as it can get very hot.
When installing the camera, please avoid pointing it directly at paper or flammable materials.
Please avoid all direct contact with the tempered glass lens cover to avoid contamination. If you need to clean the cover use cotton wool balls dipped in alcohol or glass wipes.
2. Product Description
The VIS200E-2 and XV200B-2 are colour bullet cameras designed for discreet use in low to medium risk applications. The XV200B-2 offers good
420 TVL resolution images from its Panasonic 1/4” CCD sensor and will provide images in light levels as low as 0.5 lux. The VIS200E-2 offers a high 480 TVL resolution images from its Sony 1/3” CCD sensor and will provide images in light levels as low as 0.1 lux. These cameras can be used internally or externally and can be wall or ceiling mounted, they also feature a removable sun/rain shield.
4. Features
High Resolution CCD sensor provides great quality Colour images in low light levels
Discreet styling for unobtrusive low profile use
The XV200B-2 is built with a Panasonic 1/4" CCD image sensor for
420 TVL resolution images and 0.5 lux low light sensitivity. Its Xvision
XC1 Digital Signal Processing (DSP) chip has been optimised for external viewing and features Automatic Gain Control, Automatic
Electronic Iris and Auto White Balance
The VIS200E-2 is built with a Sony 1/3" CCD image sensor for 480 TVL resolution images and 0.1 lux low light sensitivity. Its Xvision IXC1
Digital Signal Processing (DSP) chip has been optimised for internal or external viewing and features Automatic Gain Control, Automatic
Electronic Iris, Auto White Balance Back Light Compensation, Low
Smear, Edge Enhancement and Zero Colour Rolling
3.6mm focus free lens for 60°/78° viewing angle
Economical to run with an operating voltage of 12V DC and power consumption of 110mA
Durable Corrosion Proof Metal Casing
Designed for Internal or External use and Wall or Ceiling mounting with the bracket supplied
Supplied with removable sun/rain shield
4. Package Contents
Rain/Sun Shield
VIS200E-2/XV200B-2 Camera
Wiring
Bracket
1. Connect power to the DC Socket.
2. Connect video feed to the BNC Socket.
3. Test that the camera is functioning fully before finalising the position of the camera.