8 15-12

8 15-12
8 15-12
1
8 15-12
SUBJECT
DATE
Installation of the Oil Cooler
August 2012
Additions, Revisions, or Updates
Publication Number / Title
Platform
Section Title
Change
DDC-SVC-MAN-0081
DD Platform
Installation of the Oil
Cooler
Added torque specification sequence with graphic.
All information subject to change without notice.
8 15-12
Copyright © 2012 DETROIT DIESEL CORPORATION
3
2 Installation of the Oil Cooler
2
Installation of the Oil Cooler
Install as follows:
1. Using new O-rings, install the oil cooler to the oil coolant module.
2. Torque the eight securing bolts to 25-30 N·m (18-22 lb·ft) using the sequence below.
3. Install the oil coolant module. Refer to section "Installation of the Oil Coolant Module"
4
All information subject to change without notice.
Copyright © 2012 DETROIT DIESEL CORPORATION
8 15-12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement