JVC DR-MV99B User Guide Manual Operating Instruction Pdf

JVC DR-MV99B User Guide Manual Operating Instruction Pdf
DVD VIDEO RECORDER
DR-MV99BU
AUX
CHAPTER
DVD VIDEO RECORDER
-
+
RM-SDR108U
For Customer Use :
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
INSTRUCTIONS
Downloaded From DvDPlayer-Manual.com JVC Manuals
LPT1151-001A
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE AND OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD
NOT BE PLACED ON THIS APPARATUS.
CAUTION:
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating.
The openings should be never be blocked by placing
the product on a bed, sofa, rug or other similar surface.This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's instruction have been adhered to.
Downloaded
From DvDPlayer-Manual.com JVC Manuals
2
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact
an authorized service center.
Performing controls, adjustments, or carrying out procedures other than those specified herein may result
in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
CAUTION: VISIBLE AND INVISIBLE CLASS 2M
LASER RADIATION WHEN OPEN. DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the product is operated in
a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this product does cause harmful interference to radio or television reception, which can
be determined by turning the product off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the product
and receiver.
•
Connect the product into an outlet on a circuit
different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an
authorized servicer.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the plug is easily accessible.
REFERENCE
•
CAUTION concerning the Power Cord
INTRODUCTION
FCC WARNING: This equipment may generate or
use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly
approved in the instruction manual. The user could
lose the authority to operate this equipment if an
unauthorized change or modification is made.
Downloaded From DvDPlayer-Manual.com JVC Manuals
3
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
2. Keep these instructions. - The safety, operating
and use instructions should be retained for future
reference.
3. Heed all warnings. - All warnings on the product
and in the operating instructions should be
adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
5. Do not use this apparatus near water. - For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a swimming pool; and other areas located near water.
6. Clean only with dry cloth. - Unplug this product
from the wall outlet before cleaning. Do not use
liquid cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
- Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over-heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete
outlet.
Downloaded
From DvDPlayer-Manual.com JVC Manuals
4
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
About the
Symbol Display . . . . . . . . . . . . .6
Symbol Used in this Manual . . . . . . . . . . . . . .6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .6
Moisture Condensation . . . . . . . . . . . . . . . . . .6
Recordable and Playable Discs . . . . . . . . . . .7
Recommended recordable DVD discs . . . . . .7
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . .8
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .8
About the Remote Control . . . . . . . . . . . . . . .8
Restrictions on video recording . . . . . . . . . . .9
What is ‘CPRM’? . . . . . . . . . . . . . . . . . . . . . . .9
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Notice for Progressive Scan Use . . . . . . . . . .9
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . .10
Remote Control . . . . . . . . . . . . . . . . . . . . . . .11
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .12
HOOKUP AND SETTINGS
Connecting an Antenna or Cable TV . . . . . .13
Connections to your TV . . . . . . . . . . . . . .14-15
HDMI connection . . . . . . . . . . . . . . . . . . . . .15
Connection to an Amplifier . . . . . . . . . . . . . .16
Accessory Audio/Video (A/V)
Connections to Recorder . . . . . . . . . . . . . . .17
Connecting a Digital Camcorder . . . . . . . . . .17
Initial Setup Wizard . . . . . . . . . . . . . . . . . . . .18
Using the Home Menu . . . . . . . . . . . . . . . . . .19
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .19
General Settings . . . . . . . . . . . . . . . . . . . . . .20
Language Settings . . . . . . . . . . . . . . . . . . . .21
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . .22
Recording Settings . . . . . . . . . . . . . . . . . . . .22
Disc Settings . . . . . . . . . . . . . . . . . . . . . .23-24
TV VIEWING
Channel Selection . . . . . . . . . . . . . . . . . . . . .24
Channel Selection with Channel List menu .24
General Explanation of On-Screen Display .25
Displaying Information While Watching TV . .25
Displaying Disc Information on-screen . . . . .25
PLAYBACK
Playing a Tape . . . . . . . . . . . . . . . . . . . . . . . .26
Playing a DVD . . . . . . . . . . . . . . . . . . . . . . . .26
VCR Playback Options . . . . . . . . . . . . . . . . .27
DVD or Video CD Playback Features . . . .28-29
Special Playback Options . . . . . . . . . . . . . . .30
Playing a DivX Movie File . . . . . . . . . . . . . . .31
Playing an Audio CD or MP3/WMA files . . . .32
Viewing a JPEG files . . . . . . . . . . . . . . . .33-34
Downloaded From DvDPlayer-Manual.com JVC Manuals
RECORDING
INTRODUCTION
INTRODUCTION
About DVD recording . . . . . . . . . . . . . . . . . .35
Notes for recording . . . . . . . . . . . . . . . . . . . .35
Recording time and picture quality . . . . . . .35
Basic Recording from a TV . . . . . . . . . . . . . .36
Instant Timer Recording . . . . . . . . . . . . . . . .36
Timer Recording . . . . . . . . . . . . . . . . . . . . . .37
Timer Recording Troubleshooting . . . . . . . .38
To record one TV program while
watching another . . . . . . . . . . . . . . . . . . . . . .38
Dubbing from DVD to VCR . . . . . . . . . . . . . .39
Dubbing from VCR to DVD . . . . . . . . . . . . . .39
Recording from External Components . . . . .40
Simultaneous Play and Record . . . . . . . . . . .40
Recording from DV Input . . . . . . . . . . . . . . .41
EDITING
Title List and Chapter List Menu Overview .42
VR Mode: Original and Playlist Editing . . . .43
Adding Chapter Markers . . . . . . . . . . . . . . . .43
Changing the Title Thumbnails . . . . . . . . . . .43
Making a New Playlist . . . . . . . . . . . . . . . . . .44
Adding Additional Title/Chapters to the
Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Deleting an Original or Playlist Title/
Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . .45
Naming a Title . . . . . . . . . . . . . . . . . . . . . . . .46
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .46
Moving a Playlist Chapter . . . . . . . . . . . . . . .47
Hide a Chapter/Title . . . . . . . . . . . . . . . . . . . .47
Protect a Title . . . . . . . . . . . . . . . . . . . . . . . .47
Divide One Titles Into Two . . . . . . . . . . . . . .48
Combining Two Chapters Into One . . . . . . . .48
Overwriting Recording . . . . . . . . . . . . . . . . .49
Viewing Title List menu displayed on other
DVD Recorders or Players . . . . . . . . . . . . . .49
Playing Your Recordings on Other DVD
Players (Finalizing a Disc) . . . . . . . . . . . . . . .49
REFERENCE
Language Code List . . . . . . . . . . . . . . . . . . .50
Area Codes List . . . . . . . . . . . . . . . . . . . . . . .50
Troubleshooting . . . . . . . . . . . . . . . . . . . .51-53
Resetting the Recorder . . . . . . . . . . . . . . . .53
Specifications . . . . . . . . . . . . . . . . . . . . . .54-55
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
5
Introduction
To ensure proper use of this product, please read
this owner’s manual carefully and retain for future
reference.
About the
Symbol Display
“
” may appear on your TV display during operation
and indicates that the function is not permitted by this
unit or specific media.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Symbol Used in this Manual
Note:
Tip:
Indicates special notes and operating features.
Indicates tips and hints for making the task
easier.
A section whose title has one of the following symbols are applicable only to those discs represented
by the symbol.
DVD ALL All DVD discs listed below.
-RWVR DVD-RW with VR recording mode
-RWVideo DVD-RW with Video recording mode
+RW DVD+RW disc
-R DVD-R disc
+R DVD+R disc
DVD DVD-Video disc
DivX DivX files
VCD Video CDs
ACD Audio CDs
MP3 MP3 files
WMA WMA files
JPEG JPEG files
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Moisture Condensation
Never operate this product immediately after moving it from a cold location to a warm location. Leave
it for two or three hours without operating it. If you
use this product in such a situation, it may damage
discs/tapes and internal parts.
Downloaded
From DvDPlayer-Manual.com JVC Manuals
6
INTRODUCTION
Recordable and Playable Discs
DVD-RW (DVD - ReWritable)
DVD-RW discs can be formatted for VR mode recording or Video mode recording.
These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the
same Disc.
[VR mode]
Recordings can be extensively edited
Playable only on VR mode compatible players (after finalization)
[Video mode]
Playable on regular DVD players (after finalization)
Limited editing features
DVD-R (DVD - Recordable)
These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it.
DVD-R discs can be only formatted to Video mode.
Playable on regular DVD players (after finalization)
Limited editing features
DVD+RW (DVD + ReWritable)
These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the
same Disc.
Playable on DVD+RW compatible players (automatic finalization)
The edited contents are playable on DVD+RW compatible players only after finalization.
Recordings can be edited.
DVD+R (DVD + Recordable)
These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit it any
more.
Playable on DVD+R compatible players (after finalization)
Any edited contents are not compatible on DVD+R compatible players. (Hide, chapter combine, added chapter
mark, etc.)
Limited title/chapter editing features.
Recommended recordable DVD discs
DVD-R
DVD+R
DVD-RW
DVD+RW
Mitsubishi (8x, 16x)
Mitsubishi (8x, 16x)
Mitsubishi (4x)
Mitsubishi (4x)
That’s (8x, 16x)
Ricoh (8x, 16x)
Verbatim (4x)
SONY (2.4x)
SONY (16x)
SONY (16x)
JVC (4x)
Verbatim (2.4x)
-
-
Maxell (4x)
Ricoh (2.4X, 4x)
Downloaded From DvDPlayer-Manual.com JVC Manuals
7
Playable Discs
DVD (8 cm / 12 cm disc)
Discs such as movies that can be purchased or rented
Video CD (VCD) (8 cm / 12 cm disc)
VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format
Audio CD (8 cm / 12 cm disc)
Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased
CD-R/CD-RW (8 cm / 12 cm disc)
CD-R/CD-RW discs that contain audio titles, MP3, WMA or JPEG files.
Notes:
• Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some
CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
•
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
•
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
•
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW)
may not be playable.
•
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder
may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder’s lens.
•
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are
cases in which it may not play because of the settings of the application software used to create the disc.
(Check with the software publisher for more detailed information.)
•
This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different
types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible playback.
•
Customers should note that permission is required in order to download MP3 / WMA files and music from
the Internet. Our company has no right to grant such permission. Permission should always be sought
from the copyright owner.
Regional Code
This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as
the rear of the unit or “ALL”.
Notes on Regional Codes
• Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number
must match your unit’s regional code or the disc cannot play.
•
If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code.
Can’t play back” appears on the TV screen.
About the Remote Control
Operation Range
Point the Remote Control at the Remote Sensor
and press the buttons.
Distance: About 23 ft (7 m) from the front of the
Remote Sensor.
Angle:
About 30° in each direction of the front of
the Remote Sensor.
Downloaded
From DvDPlayer-Manual.com JVC Manuals
8
Battery installation
Detach the battery cover on the rear
of the Remote Control, and insert two
(R03/AAA size) batteries with 3 and
# aligned correctly.
Do not mix old and new batteries and never
mix different types of batteries such as standard, alkaline, etc.
•
You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording
will pause or stop automatically and an error message will be displayed on-screen.
•
Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode with CPRM (see
below).
INTRODUCTION
Restrictions on video recording
What is ‘CPRM’?
CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast
programs. CPRM stands for Content Protection for Recordable Media.
This Recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode and CPRM recordings can only be played on players that are specifically compatible with
CPRM.
Copyright
•
Recording equipment should be used only for lawful copying and you are advised to check carefully what is
lawful copying in the area in which you are making a copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception or consented to by the rights owner.
•
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation.
Reverse engineering or disassembly is prohibited.
Notice for Progressive Scan Use
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING
YOUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD+VCR RECORDER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
Downloaded From DvDPlayer-Manual.com JVC Manuals
9
Front Panel
a
b
-
e
fgh
a
Disc Tray (DVD deck)
Insert a disc here.
b
Z OPEN/CLOSE
Opens or closes the disc tray.
c
d
+
i j
k
l
VCR
m n
o
p
Lights when the Recorder is in playing mode
or flashes when search mode.
The VCR deck is selected.
Indicates when the recorder is in timer
recording or a timer recording is
programmed.
c
Cassette Compartment (VCR deck)
Insert a video cassette here.
d
Z EJECT
Ejects the tape in the VCR deck.
REC
The Recorder is recording.
e
STANDBY/ON (1/`)
Switches the Recorder ON and OFF.
PM
Indicates PM time. (AM is not displayed.)
f
N / X (PLAY / PAUSE)
Starts playback.
Pause playback or recording temporarily,
press again to exit pause mode.
TV
Indicates that TV mode is active.
g
x (STOP)
Stops playback
h
z (REC)
Starts recording.
Press repeatedly to set the recording time.
i
j
k
A VHS tape is inserted in the VCR deck.
Indicates total playing time,
elapsed time, remaining time
or current deck status
(Playback, Pause, etc).
l
Remote Sensor
Point the recorder Remote Control here.
m
CH (+/–)
Scans up or down through memorized
channels.
DVD/VCR
Toggles control between the DVD deck and the
VCR deck.
n
DUBBING
Press to copy DVD to VCR (or VCR to DVD).
DVD B VCR
or
Lights when recorder is dubbing.
DVD b VCR
OUTPUT STATUS
Sets the output resolution for HDMI and COMPONENT OUTPUT jacks.
- HDMI: 1080i, 720p, 480p, 480i
- COMPONENT: 480p, 480i
o
Display window
Shows the current status of the Recorder.
DV IN
Connect the DV output of a digital camcorder.
p
AV IN 2 (VIDEO /AUDIO (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
Lights when a disc is in the DVD deck.
DVD
The DVD deck is selected.
Downloaded
10 From DvDPlayer-Manual.com JVC Manuals
TV
STANDBY/ON
a
DASH (-)
DISPLAY
Enters a channel number for multiple
channels such as 2-1, 2-2, etc.
Accesses On-Screen Display.
Displays information of current status.
AUX
RETURN (O)
Changes the input to use for recording
(Tuner, AV1, AV2, or DV IN).
Removes the menu.
JVC TV Control Buttons
- TV STANDBY/ON: Turns the TV
on or off.
- INPUT: Selects the TV’s source.
- CH +/–: Selects TV’s channel.
- VOL +/–: Adjusts TV’s volume.
b
b
- DVD: Search backward or forward.
- VCR: Rewinds/Advances the tape
during the STOP mode, for fast
reverse/forward picture search.
SKIP (. / >)
Go to next chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.
PAUSE/STEP (X)
d
Selects an audio language or an audio
channel.
SUBTITLE
Selects a subtitle language.
Enlarges DVD video image.
CHAPTER
Inserts a chapter marker when playing/
recording.
z REC
Starts recording. Press repeatedly to
set the recording time.
REC MODE
Selects the recording mode:
- DVD: XP, SP, LP or EP.
- VCR: SP or SLP.
TITLE
PLAY (N)
STOP (x)
Selects a thumbnail picture for the
current title for use in the Title List
menu.
Stops playback or recording.
PLAY MODE
Displays the disc’s Title menu, if
available.
THUMBNAIL
Selects play mode.
RM-SDR108U
c
a
AUDIO
Pause playback or recording
temporarily.
Press repeatedly for frame-by-frame
playback.
Starts playback.
DVD VIDEO RECORDER
d
ZOOM
BACKWARD / FORWARD
(m/M)
c
HOME
MARKER
Marks any point during playback.
SEARCH
Displays Marker Search menu.
STANDBY/ON (1/`)
Accesses or removes the HOME
menu.
Turns Recorder ON and OFF.
CH (+/-)
Removes a mark on the Marker
Search menu.
DVD
Selects a channel. Adjusts manually
the tape’s picture onscreen.
DUBBING
Select the Recorder’s function mode to
DVD.
CLEAR
FAV. CH (+/-)
Press to copy DVD to VCR (or VCR to
DVD).
VCR
Tunes to your favorite channels.
Select the Recorder’s function mode to
VCR.
TV/VCR
DISC MENU/LIST
To view channels selected by the VCR
tuner or by the TV tuner.
EJECT, OPEN/CLOSE (Z)
INTRODUCTION
Remote Control
Accesses menu on a DVD disc, Title
List or Playlist menu.
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
b B v V (left/right/up/down)
0-9 numerical buttons
- Selects numbered options in a menu.
ENTER ( )
Selects menu options.
Confirms menu selections.
- Inputs channel numbers.
Downloaded From DvDPlayer-Manual.com JVC Manuals
11
Rear Panel
a
b
g
c
hi j
d
e
k
f
l
a
ANTENNA IN (FROM ANT.)
Connect the antenna to this terminal.
g
ANTENNA OUT (TO TV)
Connect to a TV with ANTENNA coaxial inputs
b
OPTICAL (DIGITAL AUDIO OUTPUT)
Connect to digital (optical) audio equipment.
h
COAXIAL (DIGITAL AUDIO OUTPUT)
Connect to digital (coaxial) audio equipment.
c
COMPONENT OUTPUT (Y PB PR)
Connect to a TV with Y PB PR inputs.
i
S-VIDEO OUTPUT
Connect to a S-Video Input on TV.
d
INPUT 1 (VIDEO/AUDIO (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, VCR,
Camcorder).
j
AUDIO OUTPUT (Left/Right)
Connect to a TV or other equipment with audio
inputs.
k
e
HDMI OUTPUT
VIDEO/AUDIO OUTPUT (Left/Right)
Connect to a TV with video and audio inputs.
l
Cooling fan
HDMI output providing a high quality interface
for digital audio and video.
f
AC Power Cord
Plug into the power source.
Caution:
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
Downloaded
12 From DvDPlayer-Manual.com JVC Manuals
Hookup and Settings
a
Antenna
OR
Antenna
HOOKUP AND
SETTINGS
Depending on your TV and other equipment
there are various ways you can connect the
recorder. Please refer to the manuals of your
TV, VCR, Stereo System or other devices as
necessary for additional connection information.
OR
Notes:
•
Make sure the Recorder is connected directly to the TV
and tune the TV to the correct video input channel.
•
Do not connect the Recorder’s AUDIO OUTPUT jack to
the phono in jack (record deck) of your audio system.
•
Do not connect the Recorder via another VCR. The
DVD image could be distorted by the copy protection
system.
•
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. Position the units
away from each other or turn off the unit after removing
the disc.
Rear of Recorder
b
Connecting an Antenna
or Cable TV
a Antenna:
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANTENNA IN on your Recorder. If your antenna
cable is flat connect it to a 300-ohm to 75-ohm antenna adaptor (not supplied) and slip the adaptor over
the ANTENNA IN jack. Don’t attempt to screw it into
to the Recorder.
To view or record a CATV channel
1. Tune the TV to the Recorder output channel
(CH 3 or 4).
2. Set the Recorder channel selector to the cable
output channel. (Example: CH3)
3. Select a channel using the cable converter.
Notes:
•
With this connection, you cannot record one program
while viewing another.
•
If you are using a cable box to tune channels, it is not
necessary to do Auto Channel Set.
b Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANTENNA IN jack on the Recorder.
If a converter is required connect a coaxial cable from
the wall jack to the IN connector on the converter,
and a coaxial cable from the OUT connector on the
converter to the ANTENNA IN on your Recorder. This
cable hookup permits both TV and Recorder operation.
Downloaded From DvDPlayer-Manual.com JVC Manuals
13
Connections to your TV
Notes:
•
Set the resolution to 480p using OUTPUT STATUS button on the front panel for progressive signal.
•
Progressive Scan does not work with the RF, Video or
S-Video connections.
Connect the ANTENNA OUT jack on the Recorder to
the antenna in jack on the TV using the supplied 75ohm Coaxial Cable (R).
•
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled.
•
If the resolution is set to 720p or 1080i, the VIDEO
OUTPUT, S-VIDEO OUTPUT and COMPONENT OUTPUT connections are not available.
How to set the Recorder’s RF output channel
Audio connection
1. When the Recorder is turned off, press and hold
CH (-/+) on the front panel for more than five seconds. [RF03] or [RF04] appears in the display
window.
Connect the Left and Right AUDIO OUTPUT jacks on
the Recorder to the audio left/right in jacks on the TV
using the supplied audio cables (A1 or A2).
Make one of the following connections, depending on
the capabilities of your TV.
RF coaxial connection
2. Press CH (-/+) to change the RF output channel
(RF03 or RF04).
Rear of TV
S-VIDEO
INPUT
3. Tune the TV to this channel.
Pr
Video connection
Connect the VIDEO OUTPUT jack on the Recorder
to the video in jack on the TV using the video cable
supplied (V).
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
S
C
Pb
AUDIO INPUT
L
R
Y
A2
Rear of Recorder
Note:
If you use this connection, set the TV’s source selector to
VIDEO.
S-Video connection
Connect the S-VIDEO OUTPUT jack on the Recorder
to the S-Video in jack on the TV using the optional
S-Video cable (S).
R
Component Video connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the Recorder’s
progressive scan output for the highest video resolution possible.
Connect the COMPONENT OUTPUT jacks on the
Recorder to the corresponding in jacks on the TV
using an optional Y PB PR cable (C).
Downloaded
14 From DvDPlayer-Manual.com JVC Manuals
Rear of TV
V
A1
HDMI connection
HDMI compatible TV
HDMI
If you have a HDMI TV or monitor, you can connect it
to this recorder using a HDMI cable.
1. Connect the HDMI OUTPUT jack on the recorder
to the HDMI INPUT jack on a HDMI compatible TV
or monitor (H).
2. Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
HOOKUP AND
SETTINGS
H
Notes:
• If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48
kHz] on the setup menu (See page 22). When this
choice is made, this unit will automatically convert any
96 kHz signals to 48 kHz so your system can decode
them.
• If your TV is not equipped with Dolby Digital and MPEG
decoder, set the [Dolby Digital] and [MPEG] options to
[PCM] on the setup menu (See page 22).
• If your TV is not equipped with DTS decoder, set the
[DTS] options to [OFF] on the setup menu (See page
22). To enjoy DTS multi channel surround, you must
connect this recorder to a DTS compatible receiver via
one of this recorder’s digital audio outputs.
• The arrow on the cable connector body should face up
for correct alignment with the connector on the
recorder.
HDMI has the capability to support standard, enhanced,
or high-definition video plus standard to multi-channel
surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes
per second, one connector (instead of several cables
and connectors), and communication between the AV
source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
Additional Information for HDMI
•
When you connect a HDMI or DVI compatible
device make sure of the followings:
- Try switching off the HDMI/DVI device and this
recorder. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this recorder.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720(1440)x480i, 720x480p, 1280x720p, or
1920x1080i video input.
•
Not all HDCP-compatible DVI devices will work
with this recorder.
- It’s impossible copy protected-DVD title’s playback in non-HDCP devices.
(Type A)
•
•
If there is noise or lines on the screen, please check
the HDMI cable.
Not all HDCP-compatible
Tip:
When you use HDMI connection, you can change the
resolution (480i, 480p, 720p, or 1080i) for the HDMI output using OUTPUT STATUS button on the front panel.
Caution:
Changing the resolution when the recorder is connected with HDMI connector may result in malfunctions. To
solve the problem, turn off the recorder and then turn
it on again.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read TV’s owner’s manual then set the resolution that your TV can accept.
About HDMI
HDMI (High Definition Multimedia Interface) supports both
video and audio on a single digital connection for use with
DVD Players, Set-Top Boxes, and other AV devices.
HDMI was developed to provide the technologies of HDCP
(High Definition Contents Protection). HDCP is used to protect digital content transmitted and received.
Downloaded From DvDPlayer-Manual.com JVC Manuals
•
For best performance, directly connect the HDMI
output to an HDMI input on your TV. If connecting
to some device other than a TV or monitor, such
as a home theater receiver with an HDMI input,
check the following to make sure the HDMI signal
will be received correctly:
- Check the operating instructions of the connected device to make sure that the HDMI
input of the device complies with HDMI-HDCP
specifications.
- Check that the HDMI setup menu of any nondisplay device is set to “pass-through” so that
HDMI signals received are not changed in any
way (such as changing the video or audio format).
15
Connection to an Amplifier
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
Rear of Recorder
Connect the Left and Right AUDIO OUTPUT jacks on
the Recorder to the audio left and right in jacks on
your amplifier, receiver, or stereo system using the
audio cables (A) supplied.
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby
Digital™, MPEG 2, or DTS)
1. Connect one of the Recorder’s DIGITAL AUDIO
OUTPUT jacks (OPTICAL O, COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (optical O, coaxial X) audio cable.
2. You will need to activate the Recorder ’s digital
output. (See [Audio Settings] on page 22).
O
X
A
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your Recorder (MPEG 2,
Dolby Digital and DTS). Check the receiver manual
and the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
OPTICAL
COAXIAL
DIGITAL INPUT
DIGITAL INPUT
L
R
AUDIO INPUT
Amplifier (Receiver)
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
Notes:
•
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a
strong, distorted sound or no sound at all.
•
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped
with a Digital Multi-channel decoder.
•
To see the audio format of the current DVD in the onscreen display, press AUDIO.
•
This Recorder does not perform internal (2 channel)
decoding of a DTS sound track. To enjoy DTS multi
channel surround, you must connect this Recorder to a
DTS compatible receiver via one of this Recorder’s digital audio outputs.
•
While viewing a digital channel, the 2 channel stereo
audio is only output through the audio output jacks.
Downloaded
16 From DvDPlayer-Manual.com JVC Manuals
“DTS” and “DTS Digital Out” are registered
trademarks of DTS, Inc.
Accessory Audio/V ideo (A/V)
Connections to Recorder
Connecting a Digital
Camcorder
Connect the INPUT 1 or AV IN 2 jacks on the
Recorder to the audio/video out jacks on your accessory component, using the optional audio/video
cables. (Refer to page 40 for [Recording from
External Components].)
Use a DV cable (not supplied) to connect the DV
in/out jack of your DV Digital Camcorder to the front
panel DV IN jack of this Recorder.
HOOKUP AND
SETTINGS
Notes:
This jack is for connection to DV equipment only. It
is not compatible with digital satellite tuners or DVHS video decks.
Disconnecting the DV cable while recording a contents of the connected digital camcorder may result
in malfunction.
DV Digital Camcorder
DV
IN/OUT
Rear of Recorder
Front of Recorder
Front of Recorder
Downloaded From DvDPlayer-Manual.com JVC Manuals
17
Initial Setup W izard
5. Enter the necessary information for year, date and
time.
After the STANDBY/ON is pressed for the first time to
turn on the unit or after factory setting (See page 20),
the Initial Setup Wizard function sets the Language,
Channels and Clock step-by-step until the setup is
complete.
1. Use v / V to select a language for the Setup
menu and information display then press ENTER.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the
current cursor position.
Press ENTER to confirm your setting.
6. Press ENTER to exit the menu.
2. Check your antenna connections.
Press B to move next step.
Note:
3. Select the [Tuning Band] option then press B .
TV is for over-the-air antenna reception.
CATV is for cable subscribers.
4. Press ENTER to begin the channel search.
You can skip the analog channel scanning by
pressing B.
Downloaded
18 From DvDPlayer-Manual.com JVC Manuals
You can reset the Initial Setup Wizard from the
[Factory Set] in the setup menu. (see page 20).
From the Home Menu screen you can access all the
Media for playback and recording of the recorder.
Easy Menu
•
Dubbing: Displays [Dubbing] menu. (See page
39)
•
Disc Manager: Displays Disc setup menu. (See
page 25)
•
Rec. Mode: Displays Record Mode setup menu.
(See page 22)
•
DV Input: Displays DV Input mode. (See page
41)
1. Press HOME and the Home menu appears.
2. Use b / B to select the desired main option.
3. Use v / V to select the desired Sub option then
press ENTER to confirm your selection.
4. To exit the HOME menu, press HOME.
Setup
•
Start: Displays Setup menu.
HOOKUP AND
SETTINGS
Using the Home Menu
Initial Settings
In this menu system, there are several ways to customize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings.
1. Press HOME and the Home menu appears.
TV
•
Auto Ch. Scan: Displays [Auto Channel Set]
menu. (See page 20)
•
Channel Edit: Displays Channel Edit setup
menu. (See page 20)
•
Channel List: Displays the Channel List menu.
(See page 24)
•
Timer Record: Displays [Timer Record] menu.
(See page 37)
2. Select [Setup] > [Start] and press ENTER.
Movie
•
VCR: Plays back VHS cassette.
•
DISC:
- Displays TITLE LIST menu for recordable disc
(page 42)
- Plays back DVD-Video disc (page 28-29).
Photo (See page 33-34)
•
DISC: Displays [Photo List] menu for disc.
Music (See page 32)
•
DISC: Displays [Music List] menu for disc.
3. Use v / V to select the desired option.
4. While the desired item is selected, press B to
move to the second level.
5. Use v / V to select the second desired option.
6. Press B to move to the third level.
7. Use v / V to select the desired setting then press
ENTER to confirm your selection.
Some items require additional steps.
8. Press RETURN (O) or HOME to exit the Setup
menu.
Note:
Press b to go back to the previous level.
Downloaded From DvDPlayer-Manual.com JVC Manuals
19
General Settings
Auto Channel Set
This recorder is equipped with a frequency
synthesized tuner capable of receiving the analog
and digital channels.
4. Use v / V to select an option then press ENTER.
[Add] Adds a unmemorized channel manually.
[Delete] Deletes a memorized channel from
channel list. A digital channel has multiple
channels, so if you delete the digital channel,
all multiple channels will be deleted.
[Skip On/Off] (for memorized digital channel only)
Set the channel to the skipped channel.
The skipped channel number will dim.
The channel cannot be selected using the
CH (+/-) button during normal TV viewing.
[Favorite On/Off] Set the memorized channel to
favorite channel. (favorite channel shows
heart (♥) icon.)
[MFT Adjust] (for memorized analog channel only)
To obtain a clearer picture, tune the MFT option.
1. Select the [Auto Channel Set] option then press B.
2. Use v / V to select the tuning band (TV or
CATV) option.
TV is for over-the-air antenna reception.
CATV is for cable subscribers.
5. Press RETURN (O) repeatedly to exit Channel
List menu.
Clock Set
You can set the clock.
3. Press B to highlight [Start] icon.
4. Press ENTER to begin the channel search.
You can skip the analog channel scanning by
pressing B while scanning analog channel.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
1. Select the [Clock Set] option then B.
2. Enter the necessary information for year, date
and time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the
current cursor position.
Notes:
3. Press ENTER to confirm your setting.
•
•
If you want to change the [Band] option, you must execute the auto channel search after changing the [Band]
option.
This Recorder supports only unencrypted channels for
cable subscribers.
Channel Edit
You can edit a channel manually (add, delete, etc.).
1. Select the [Channel Edit] option then press B .
2. Press ENTER while the [Edit] icon is highlighted.
The Channel List menu appears.
TV Aspect
[4:3 Letter Box]: Select when a standard 4:3 TV
is connected. Displays theatrical images with
masking bars above and below the picture.
[4:3 Pan Scan]: Select when a standard 4:3 TV is
connected. Displays pictures cropped to fill your
TV screen. Both sides of the picture are cut off.
[16:9 Wide]: Select when a 16:9 wide TV is connected.
Power Save Mode
Set Power Save Mode to [ON] to place your
Recorder into an economic power save mode.
Nothing is displayed in the display window when the
unit is turned off.
Factory Set
You can reset the Recorder to its original factory
settings.
1. Select the [Factory Set] option.
3. Use b / B / v / V to select a channel number
then press ENTER.
2. Press B to select [SET] then press ENTER.
3. Select [OK] and press ENTER.
4. Follow the Initial Setup Wizard on page 18.
Downloaded
20 From DvDPlayer-Manual.com JVC Manuals
Language Settings
Note:
You can set [DTV Caption], [DTV Caption Style],
[DTV Caption Option] and [DTV Audio] options only while
viewing digital TV.
Analog Caption is not displayed on this Recorder.
If your TV has the Analog Caption function, you can
switch the Analog Caption using the TV. If analog
and digital caption is overlapped on the TV screen,
switch off one of two captions.
DTV Caption Style
Selects the style for caption.
HOOKUP AND
SETTINGS
[Set by program] Default caption type provided by a
broadcaster is shown when captions appear.
[Custom] Customized text is shown when captions
appear. Use [DTV Caption Option] to customize the
caption type.
DTV Caption Option
Display Menu
Select a language for the Setup menu and
information display.
Disc Menu / Audio / Subtitle
[Original]: Refers to the original language in
which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to enter the
corresponding 4-digit number according to the
language code list in the reference chapter (see
page 50). If you enter the wrong language code,
press CLEAR.
[OFF] (for Disc Subtitle): Turn off Subtitle.
Note:
•
•
The appearance of Audio and Subtitle not only
depended on the setting of Home Menu when play
a DVD disc; it depends on what languages of audio
and subtitle were pre-recorded in the disc also.
For some of DVD movies, the audio cannot be
changed by set the Home Menu, but you have to
access the DVD disc menu with ‘Disc menu/list’
button (on remote control) to change the language
of audio.
DTV Caption
Digital channels sometimes provide caption, often in a
different language. You can set a default caption language with this setting. If you select [Off], DTV
Caption is not displayed.
Note:
DTV caption will appear only if provided by the
broadcaster.
Tips:
If available, you can also select a caption language
while viewing digital TV viewing, press SUBTITLE
repeatedly.
If captions are available, the DTV caption icon ( )
appears on the channel information display to indicate that you can select one of those captions with
the SUBTITLE button.
Downloaded From DvDPlayer-Manual.com JVC Manuals
You can set [DTV Caption Option] only when [DTV
Caption Style] is selected in [Custom].
Font: Selects the font type for captions.
Size: Selects the font size for captions.
Color: Selects the font color for captions.
Opacity: Selects the font opacity for captions.
- Solid: The text is solid (without any transparency).
- Flash: The text blinks once a second.
- Transparent: The text is transparent (In this case,
whatever the color is, the color does not affect the
captions display).
- Translucent: The text is translucent.
BG (Background) Color: Selects the background
color for captions.
BG (Background) Opacity: Selects the background opacity for captions.
- Solid: The text background color is solid (without
any transparency).
- Flash: The text background color blinks once a
second.
- Transparent: The text background color is transparent (In this case, whatever the background
color is, the color does not affect the captions.).
- Translucent: The text background color is
translucent.
Edge Type: Selects the edge type for captions.
- None: The text has no edge.
- Raised: The text is raised.
- Depressed: The text is depressed.
- Uniform: The text has a uniform edge.
- Left Shadow: The text has a left-shadow edge.
- Right Shadow: The text has a right-shadow edge.
Edge Color: Selects the edge color for captions.
DTV Audio
Digital channels sometimes provide multiple audio
tracks, often in a different language. You can set a
default audio language with this setting.
Tip:
If provided by the broadcaster, the
(DTV
Multiple Audio Icon) appears on the channel information display to indicate that you can select one of
those audio languages with the AUDIO button.
21
Audio Settings
Recording Settings
Each DVD disc has a variety of audio output options.
Set the Recorder’s Audio Output according to the
type of audio system you use.
Disc Record Mode
You can set the picture quality for recording;
XP (High Quality), SP (Standard Quality),
LP (Low Quality), EP (Extend Quality).
Dolby Digital / DTS / MPEG
[Bitstream]: Select [Bitstream] if you connect the
DVD+VCR’s DIGITAL AUDIO OUTPUT jack to an
amplifier or other equipment with a Dolby Digital,
DTS or MPEG decoder.
[PCM] (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will
be automatically downmixed to two-channel PCM
audio.
[OFF] (for DTS): If you select [OFF], the DTS
signal is not output through the DIGITAL AUDIO
OUTPUT
Sampling Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice
is made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is
made, this unit passes each type of signal through
without any further processing.
Check the documentation for your amplifier to verify
its capabilities.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). This allows
you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to [ON] for this effect.
Downloaded
22 From DvDPlayer-Manual.com JVC Manuals
1. Select the [Disc Record Mode] option then press B.
2. Use v / V to select a desired Disc Record Mode
(XP, SP, LP or EP).
3. Press ENTER to confirm your selection, then
press HOME to exit the menu.
VCR Record Mode
You can set the picture quality for VCR recording;
SP (Standard Play), SLP (Super Long Play).
DV Record Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV
IN jack. Some digital camcorders have two stereo
tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used. On the Audio 2 setting, the
overdubbed sound is used.
Auto Chapter
During recording, chapter markers are added automatically at fixed intervals. You can set this interval to
5 minutes or 10 minutes. To turn off automatic chapter marking, select [None].
Initialize
If you load a completely blank disc, the recorder will
initialize the disc.
•
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
•
DVD-RW/ DVD+RW/DVD+R: The Initialize menu will
appears. Select [OK] then press ENTER.
DVD-RW disc is initialized to Video mode.
Also, you can reformat the DVD-RW/DVD+RW from
the Setup menu as below.
3. Select [OK] then press ENTER.
The Recorder starts finalizing the disc.
Notes:
•
Finalization can take up to 3-4 minutes or more depending on the type of disc, how much is recorded on the
disc, and the number of titles on the disc.
Tips:
•
•
•
HOOKUP AND
SETTINGS
Disc Settings
If you load a DVD-RW that has already been finalized,
you can ‘Unfinalize’ it by choosing [Unfinalize] from the
Finalize menu. After doing this, you can edit and rerecord onto the disc.
You cannot unfinalize a DVD-R and DVD+R disc.
If [Disc Protect] option is set to [ON], the finalize is not
available. To finalize, set [Disc Protect] option to [OFF].
Disc Label
Use the Disc Label feature to enter a name for the
disc. This name appears when you load the disc and
when you display disc information on-screen.
• The Disc label can be up to 32 characters long.
• For discs formatted on a different Recorder, you
will see only a limited character set.
1. Select the [Initialize] option then press B.
[Start] icon is highlighted.
1. Select the [Disc Label] option then press B.
[Edit] icon is highlighted.
2. Press ENTER.
In case of DVD-RW, use b / B to select a
desired Disc Initialize Mode (VR Mode or Video
Mode) then press ENTER.
• In case of DVD+RW, use b / B to select [OK],
and press ENTER.
It takes a few moments to format the disc.
2. Press ENTER.
Keyboard menu appears.
To enter characters, see page 46.
Caution:
If you want to change the disc format, everything
recorded on the disc will be erased.
Finalize
Finalizing ‘fixes’ the recordings in place so that the
disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
DISC MENU/LIST or TITLE.
Caution:
Once you have finalized a DVD-R and DVD+R disc,
you cannot edit or record anything else on that disc
except DVD+RW. However, you can record and edit
a DVD-RW disc by choosing [Unfinalize] option.
1. Select the [Finalize] option then press B.
2. Press ENTER while [Finalize] is selected.
Finalize menu appears.
Downloaded From DvDPlayer-Manual.com JVC Manuals
Disc Protect
Depending on the type of disc you are using, Disc
Protect allows you to preserve your recordings in a
variety of ways:
• DVD+RW: Prevents editing, erasing, or overwriting of existing recordings. Allows regular recording.
• DVD+R: Prevents editing or erasing of existing
recordings. Allows regular recording.
• DVD-RW (VR mode): Prevents
editing, erasing, and regular recording.
Notes:
•
Disc Protect is not compatible with DVD-RW discs in
Video mode or DVD-R discs.
•
If you need to unlock a disc to make edits, select [OFF].
PBC
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
REFERENCE
•
[ON]: Video CDs are played according to the PBC, if
available.
[OFF]: Video CDs are played the same way as Audio
CDs.
23
AutoPlay
When you load a DVD with AutoPlay turned on, the
Recorder will bypass the Disc menu and trailers and
start playing the movie automatically.
Set [AutoPlay] to [ON] or [OFF].
DivX Registration Code
Channel Selection with Channel List
menu
DivX
®
We provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more
information, visit www.divx.com/vod.
1. Select [About DivX(R)] option then press B.
2. Press ENTER while [Enter] is selected and the
registration code will appear.
3. Use the registration code to purchase or rent the
videos from Divx® VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on
this unit.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
TV Viewing
Channel Selection
Displaying Channel List and Changing
Channel
1. Press HOME and the Home menu appears.
2. Select [TV] > [Channel List] and press ENTER.
The channel list menu will appear.
3. Select your desired channel using the v / V and
press ENTER to change the channel.
Switching Channel List
Four types of channel lists are provided for easy and
quick channel searching. You can switch the channel
lists to TV (CATV), DTV (CADTV), Favorite or ALL.
1. Press v to move the highlight position to top of
the channel list.
2. Press b / B to select a [TV (CATV)], [DTV
(CADTV)], [Favorite] or [ALL].
Selected channel list appears.
You can select a channel as shown below.
TV (CATV): Shows all analog TV channels.
Number and – (dash) buttons
DTV (CADTV): Shows all digital TV channels.
Use Number (0-9) and – (dash) buttons to select a
channel directly.
Favorite: Shows favorite channels.
(favorite channel shows heart (♥) icon.)
FAV. CH +/- button
Press FAV +/– to scroll through your favorite channels. (favorite channel shows heart (♥) icon.)
Note:
To set a favorite channel, use [Channel Edit] option in
the Setup menu. (See page 20.)
CH +/– buttons
Use CH +/– on the Remote Control or CH v/V on the
front panel to cycle the recorder through the channels
in memory.
Downloaded
24 From DvDPlayer-Manual.com JVC Manuals
ALL: Shows all analog and digital channels.
General Explanation of
On-Screen Display
Some DVDs require specific operation or allow only
limited operation during playback. When this occurs,
is displayed, action prohibited or not available.
Displaying Disc Information
on-screen
You can display various information about the disc or
tape loaded on-screen. Some items can be changed
using the menu.
1. Press DISPLAY once to show current status.
Displaying Information While
Watching TV
Example: DVD-RW in VR mode
During viewing the TV, press DISPLAY to display/
remove the information displayed on-screen.
Indicates program title, start time, end time,
etc. Details are below. (Digital channel only)
2. Press DISPLAY once again to show various
playback information.
The items displayed differ depending on the disc
type or playing status.
TV VIEWING
Indicates channel number, station name, and
audio signal by the tuner.
Indicates the disc format, free space,
and elapsed time progress bar.
Indicates audio language for
digital channel or output audio
signal for analog channel
(Stereo, Mono, SAP, etc.).
Indicates current date and time.
Note:
You must set the clock on the setup menu to display
the correct start time and end time of the program
while viewing digital channel.
Channel Information Icon
(DTV caption icon)
Indicates that the current channel contains the DTV
caption. Press SUBTITLE to select a DTV caption
language.
TV Aspect
Indicates that the current channel is wide or 4:3 picture format.
3. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
For details about each item, see the pages in
parenthesis.
•
•
•
•
•
•
•
[Title]: Current title (or track) number/total
number of titles (or tracks) (page 28, 29)
[Chapter]: Current chapter number/total
number of chapters (page 28)
[Time]: Elapsed playing time (page 30)
[Audio]: Selected audio language (DVD
VIDEO only) or audio channel (page 29)
[Subtitle]: Selected subtitle (page 28)
[Angle]: Selected angle/total number of angles
(page 30)
[Sound]: Selected sound mode (page 30)
Note:
If no button is pressed for 10 seconds, the on-screen display disappears.
(DTV Multiple Audio Icon)
Indicates that the current channel contains the DTV
multiple audio languages. Press AUDIO to select an
audio language.
Downloaded From DvDPlayer-Manual.com JVC Manuals
25
Playback
Playing a Tape
Remote Control Function
Remote Control A/B/C/D Code
Switching
1. Press VCR to control the VCR deck.
2. Insert a pre-recorded video cassette.
The remote control is capable of controlling four JVC
video units independently. Each of the units can
respond to one of four codes (A, B, C or D). The
remote control is preset to send C code signals
because your unit is initially set to respond to C code
signals. You can easily modify your unit to respond to A,
B or D code signals.
-
+
If the unit is powered off, it will power on
automatically when the tape is loaded.
•
If the Timer indicator lights on the front panel
display window, press STANDBY/ON once.
3. Press PLAY (N) to start playback.
• If a tape without a safety tab is inserted the
unit starts playback automatically.
4. Press STOP (x) to stop playback.
• If the tape reaches the end before you press
STOP (x) the Recorder automatically stops,
rewinds and ejects the tape.
B/``
STANDBY/ON (1/&)
TV
STANDBY/ON
•
Note:
S-VHS Quasi Playback (SQPB)
Number 1-4
STOP (x)
ENTER (
)
•
This Recorder can play back S-VHS recorded
tapes, however, it cannot make recordings using
S-VHS format tapes.
•
SQPB is an abbreviation for S-VHS Quasi
Playback.
Playing a DVD
1. Press DVD to control the DVD deck.
2. Press EJECT, OPEN/CLOSE (Z) to open the disc
tray. Load your chosen disc in the tray, with the
playback side down.
DVD VIDEO RECORDER
RM-SDR108U
1. Press STANDBY/ON (1/&) on the unit to turn off the
unit with no video tape inserted.
2. Press the number key “1” for A, “2” for B, “3” for C or
“4” for D while pressing ENTER ( ) down on the
remote control.
3. Press N/`` on the unit for over 5 seconds while the
unit is turned off. The current code appears on the
display window.
4. Press STOP (x) on the remote control, the current
code on the display window changes to new code
and blinks for approximately 10 seconds.
5. The new code setup on unit and remote is done.
Note:
If you change the batteries of the Remote Control with
A, B or D code, the remote control code is set to C
automatically. In this case, you should reset the remote
control code described above.
Downloaded
26 From DvDPlayer-Manual.com JVC Manuals
3. Press EJECT, OPEN/CLOSE (Z) to close the
tray. Playback starts automatically. If playback
does not start, press PLAY (N) or Starts playback using HOME menu.
4. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
the disc. “Xx” appears on the screen briefly.
Press PLAY (N) to resume playback (from the
scene point). If you press STOP (x) again or
unload the disc (“x” appears on the screen.), the
unit will clear the stopped point.
5. Press EJECT, OPEN/CLOSE (Z) to remove the
disc.
Press EJECT, OPEN/CLOSE (Z) to close disc
tray or press STANDBY/ON (1/&), the disc tray
closes automatically and unit turns off.
VCR Playback Options
Buttons
Operations
EJECT (Z)
Ejects the tape in the VCR deck.
PAUSE (X)
Pause playback.
Press repeatedly to step forward one frame at a time.
•
BACKWARD (m)
Scan forward. In Stop mode, fast forwards the tape.
In Pause mode, starts slow motion playback.
•
After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and
video heads
•
After 3 minutes in SLOW MOTION mode the Recorder goes back to PLAY mode to protect the
tape and video heads.
Scan backward. In Stop mode, rewinds the tape.
•
After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and
video heads.
CLEAR
Resets the current tape counter position to 0:00:00. To automatically goto tape counter
position 0:00:00, press RETURN while the tape is in Stop mode or in Play mode.
CH (+/-)
Manually reduces noise on the screen during tape playback. Tracking is set
automatically when a tape is inserted.
AUDIO
Sets tape audio to HIFI, LEFT, RIGHT or NORMAL.
Use b/B buttons to select tape audio you want.
Downloaded From DvDPlayer-Manual.com JVC Manuals
PLAYBACK
FORWARD (M)
After 5 minutes in STILL mode the Recorder stops to protect
the tape and video heads.
27
DVD or Video CD Playback Features
Buttons
Operations
Discs
OPEN / CLOSE (Z)
Opens or closes the disc tray.
All Discs
PAUSE (X)
Pause playback.
All Discs
Press repeatedly to play Frame-by-Frame.
You can also use b / B to step backward and forward
while in Pause mode.
DVD ALL
VCD
DVD ALL
ACD
VCD DivX
In Pause mode, press BACKWARD (m) / FORWARD
(M) for slow motion playback.
- DVD; 4 steps,
- Video CD; 3 steps
• This function is forward only for Video CD.
DVD ALL
VCD
Press SKIP (> or .) briefly during playback to select
the next chapter/track or to return to the beginning of the
current chapter/track.
Press SKIP (.) twice in quick successions to step back
to the previous chapter/track.
DVD ALL VCD DivX
ACD MP3 WMA
BACKWARD (m) / FORWARD (M)
During playback, press repeatedly to select the required
scan speed.
- DVD; 5 steps,
- Video CD, DivX, Audio CD; 3 steps
SKIP (. / >)
•
To go directly to any chapter/track during
playback, press DISPLAY twice and use v / V to select
the chapter or track (for Video CD) icon. Input the
chapter/track number or use b / B.
• On a Video CD with PBC, you must set PBC to [OFF]
in the Setup menu to use this function (See page 23).
•
On an Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) during
playback.
ZOOM
Enlarge the video image.
(x1 size → x2 size → x4 size → x1 size (normal size))
You can move through the zoomed picture using b B v V
buttons.
TITLE
If the current DVD title has a menu, the title menu appears DVD
on the screen. Otherwise, the disc menu may appears.
+RW
DISC MENU/LIST
The disc menu appears on the screen.
DVD
DivX
SUBTITLE
During playback, press SUBTITLE then press b / B
repeatedly to select a desired subtitle language.
DVD
DivX
Downloaded
28 From DvDPlayer-Manual.com JVC Manuals
DVD ALL
+R
Operations
PLAY MODE
Select a desired play mode while playback.
AUDIO
Discs
[A-]: Repeats a sequence between A (Start point) and B
(End point) during playback. Press ENTER at your
chosen end point then the repeat sequence begins.
DVD ALL VCD ACD
Karaoke DVD
[CHAPTER]: Repeats the current chapter.
DVD ALL
[TITLE]: Repeats the current title.
DVD ALL
[ALL]: Repeats the all titles/tracks.
VCD ACD -RWVR
[Track]: Repeats the current track.
VCD ACD MP3 WMA
[RANDOM]: Random playback
VCD
[Folder]: Repeats all the tracks on a folder of a disc.
MP3 WMA
[OFF]: Does not play repeatedly.
DVD ALL
•
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
•
By pressing SKIP (>) during Random playback, the
Recorder selects another title (track) and resumes
Random playback.
Press AUDIO then press b / B repeatedly to hear a
different audio language, audio track or encoding method.
Karaoke DVD
Karaoke DVD
PLAYBACK
Buttons
DVD DivX
Note:
Some discs feature both Dolby Digital and DTS soundtracks. There is no analog audio output when DTS is
selected. To listen to the DTS soundtrack, connect this
recorder to a DTS decoder via one of the digital outputs.
See page 16 for connection details.
Press AUDIO then press b / B repeatedly during playback DVD ALL VCD
to hear a different audio channel.
With DVD-RW discs recorded in VR mode that have both
a main and a Bilingual audio channel, you can switch
between Main (L+L), Bilingual (R+R), or a mix of
both (L+R).
Downloaded From DvDPlayer-Manual.com JVC Manuals
29
Special Playback Options
If a menu screen is displayed
DVD
VCD
In some cases, the disc menu might appear instead.
DVD
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start. Press
TITLE or DISC MENU/LIST to return to the menu
screen.
VCD
Use the number buttons to select the track you want
to view and press RETURN to return to the menu
screen. Menu settings and operating procedures may
differ. Follow the instructions on each menu screen.
You may also set PBC to [OFF] (See page 23).
Camera Angle DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback. Press DISPLAY then select
the Angle icon during playback. Use b / B to select a
desired angle. Note that the number of the current
angle appears on the display.
Tip:
The Camera Angle icon is displayed on the TV screen when
alternate angles are available.
3D Surround DVD ALL
VCD
DivX
To start playing at any chosen time on the disc:
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
1. Press DISPLAY twice then use v / V to select the
sound icon. Then, use b / B to select [3D SUR.].
1. Press DISPLAY twice during playback. The time
search box shows the elapsed playing time.
2. To turn off the 3D Surround effect, select
[NORMAL].
2. Press v / V to select the time clock icon and
[-:--:--] appears.
Last Scene Memory DVD
Time Search DVD ALL
DivX
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press b / B to move the under
bar (_) to the wrong number. Then enter the
correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
Marker Search DVD ALL
VCD
This Recorder memorizes last scene from the last
disc that is viewed. The last scene remains in memory even if you remove the disc from the Recorder or
switch off the Recorder. If you load a disc that has
the scene memorized, the scene is automatically
recalled.
Notes:
•
•
To enter a Marker
You can start playback from up to six memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to six
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH.
The marker search menu appears on the screen.
2. Use b/B/v/V to select a marker scene that you
want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, Press CLEAR and use b / B
to select [OK] then press ENTER to delete
marked scene from the list.
4. To remove the Marker Search menu,
press RETURN (O).
Downloaded
30 From DvDPlayer-Manual.com JVC Manuals
•
Settings are stored in memory for use any time.
This Recorder does not memorize settings of a disc if
you switch off the Recorder before commencing to play
it.
Last Scene Memory function for a previous DVD title is
erased once a different DVD title is played.
Finding Locations on a Disc VCD
You can directly access any point on a video CD
using this function within 95% of progress bar while
playing. This function will not work if any bookmarks
have been set.
1. Press SEARCH during playback.
The progress bar appears on the TV screen.
2. Use b / B to find the desired starting position for
playback.
3. Press ENTER to confirm the selected position.
Playback starts from the selected position.
Note:
This function works only when no marker is
memorized.
Playing a DivX Movie File
Movie List menu options
The recorder can play DivX files. Before playing DivX
files, read “DivX file requirement” on right.
1. Press v / V to select a folder/file on the [Movie
List] menu then press ENTER.
[Movie List] menu options appear.
1. Press HOME.
2. Press v / V / b / B to select an option, and press
ENTER.
2. Select [Movie] option.
3. Select a media that contains DivX file(s) then
press ENTER.
The [Movie List] menu appears on the TV screen.
[Play] Start playback the selected title.
[Open] Opens the folder and a list of files in the
folder appears
DivX file requirement
5. If you want to view a particular file, press v / V to
highlight a file and press PLAY (N).
You can use variable playback functions. Refer to
pages 28-29.
6. Press STOP to stop the playback. The [Movie
List] menu appears.
Notice for displaying the DivX subtitle
If the subtitle does not display properly, please follow
the steps below.
1. Press PAUSE/STEP when the subtitle appears.
2. Press and hold SUBTITLE about 3 seconds.
The language code will appear.
3. Press b / B to select another language code until
the subtitle is displayed properly.
4. Press PLAY (N) to continue playback.
Note:
The DivX subtitle file name has to be identified with
the DivX file name to display by this unit.
Downloaded From DvDPlayer-Manual.com JVC Manuals
PLAYBACK
4. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use
the v / V buttons on the remote to highlight
and press ENTER.
Available resolution size: 720x576 (W x H) pixel
DivX file extensions: “.avi”, “.divx”
Playable DivX subtitle: “.smi”, “.srt”,
“.sub (Micro DVD format only)”,
“.txt (Micro DVD format only)”
Playable Codec format: “DIV3”, “MP43”, “DIVX”,
“DX50”
Playable Audio format: “AC3”, “PCM”, “MP2”,
“MP3”, “WMA”
Sampling frequency:
within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
Bit rate:
within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 1999 (total number
of files and folders)
Notes on DivX format
If the number of the screen frame is over 29.97
frames per second, this unit may not operate normally.
If the video and audio structure of recorded file is
not interleaved, returns to the menu screen.
If there is impossible code to express in the DivX
file name, it may be displayed as “_” mark.
If the file is recorded with GMC, the unit supports
only 1-point of the record level.
* GMC?
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX, have this option.
There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC.
31
Playing an Audio CD or
MP3/WMA files
Music List menu options
1. Press v / V to select a track/file or folder on the
[Music List] menu then press ENTER.
The Recorder can play Audio CDs and MP3/WMA
files. Before playing MP3/WMA files, read [MP3/WMA
audio file requirement] on right.
1. Press HOME and the Home menu appears.
2. Select [Music] > [DISC] and press ENTER.
The [Music List] menu appears on the TV screen.
2. Use v / V to select an option, then press ENTER.
• [Play] Start playback the selected track or file.
• [Open] Opens the folder and a list of files in the
folder appears.
• [Random] Start or stop random playback.
Example) Audio CD
3. Use v/V to select a track or file then press
PLAY (N). Playback starts.
You can use variable playback functions. Refer to
pages 28-29.
4. To stop playback at any time, press STOP (x).
Tips:
Random
1. Press v / V to select a file then press ENTER.
The menu options appear.
2. Press v / V to select [Random] option then press
ENTER.
The unit automatically begins random playback
and “RANDOM” appears on the menu screen.
3. To return to normal playback, select [Random]
option again then press ENTER.
•
You can view TV channel or video input source by
pressing RETURN (O). If you want to return to the
[Music List] menu, press DISC MENU/LIST.
•
Press DISPLAY to view ID3-Tag information for the MP3
file. If ID3-Tag information is not present, [ID3-Tag:
None] will appear. If you select a folder, the number of
subfolders and number of MP3/WMA files in the folder
are displayed. Press DISPLAY again to remove the
information screen.
•
On CDs, DVDs with mixed content (Audio tracks,
MP3/WMA files or JPEG files), you can select between
the [Music List] menu and [Photo List] menu by pressing
TITLE repeatedly.
MP3/WMA audio file requirement
If you are in a file list and want to return to the Folder
list, use the v/V to highlight
and press ENTER to
return to the previous menu screen.
Sampling frequency:
within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
•
Tip:
By pressing SKIP ./> during Random playback, the unit selects another track and resumes
Random playback.
File extensions
“.mp3”, “.wma”.
Bit rate: within:
8 - 320kbps (MP3), 32 - 192kbps (WMA)
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
ISO 9660 (UDF Bridge format)
Maximum Files/Disc:
Less than 1999 (total number of files and folders)
Downloaded
32 From DvDPlayer-Manual.com JVC Manuals
V iewing a JPEG files
This unit can play JPEG files. Before playing JPEG
recordings, read “Photo file requirement” on page 34.
Photo List menu options
1. Use v V b B to select a file then press ENTER.
The menu options appear.
1. Press HOME and the Home menu appears.
2. Select [Photo] > [DISC]] and press ENTER.
3. Use v V b B to select a file or folder and press
ENTER.
2. Use v / V to select an option then press ENTER
to confirm your selection.
• [Open] Opens the folder and a list of files in the
folder appears.
• [Full Screen] Shows the selected file as full
2. Use v / V to select option and press ENTER.
screen.
• [Slide Show] Displays Slide Show menu.
Example: When you select a file.
Still picture
Use PAUSE/STEP (X) while viewing slide show to
pause mode.
PLAYBACK
3. Use v / V to select [Full Screen] then press
ENTER.
The selected image is displayed in full screen.
Skip Images
While viewing a picture, press SKIP (> or .)
once to advance to the next file or return to the
previous file.
Press ENTER to make this menu appear or disappear.
4. To stop viewing at any time, press STOP (x).
Rotate Images
Use v / V while viewing a picture to flip the picture
clockwise or counterclockwise.
Notes:
•
If the
icon displays in the [Photo List] menu, it
means you cannot see those JPEG files.
•
You can view TV channel or video input source by
pressing RETURN (O). If you want to return to the
[Photo List] menu, press DISC MENU/LIST.
•
If you are in a file list and want to return to the Folder
list, use the v/V to highlight
and press ENTER to
return to the previous menu screen.
•
On CDs, DVDs with mixed content (Audio tracks,
MP3/WMA files or JPEG files), you can select between
the [Music List] menu and [Photo List] menu by pressing
TITLE repeatedly.
Downloaded From DvDPlayer-Manual.com JVC Manuals
33
View Slide Shows
1. Select [Slide Show] option on the [Photo List]
menu.
2. Press ENTER.
Photo file requirement
File extensions
“.jpg”
Photo size:
Less than 4MB recommended
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
ISO 9660 (UDF Bridge format)
Maximum Files/Disc:
Less than 1999 (total number of files and folders)
3. Use b / B / v / V to set the options.
[Object] option:
• [Selected] Views slide show only selected
files.
• [All] Views slide show all files.
[Speed] option:
Sets the Slide Show speed to
[Normal], [Slow], or [Fast].
4. Select the [Start] option then press ENTER to
start the Slide Show.
5. Press STOP (x) to stop the Slide Show and
returns to the [Photo List] menu.
Tips:
•
Selecting multiple files
1. Press MARKER.
A check mark appears on the file. Press MARKER
again to cancel the marked file.
2. Repeat step 1 to mark additional file.
•
Use the CLEAR button to select all files, or cancel all
marked files.
Downloaded
34 From DvDPlayer-Manual.com JVC Manuals
Notes on JPEG file
Progressive and lossless compression JPEG
image files are not supported.
Depending on the size and number of the JPEG
files, it may take several minutes to read the contents of the media.
About DVD recording
•
Notes:
• This Recorder cannot record CD-R or CD-RW
discs.
The displayed times for recording and time
remaining may not always add up to exactly the
length of the disc.
•
The recording time available may decrease if you
heavily edit a disc.
•
Fingerprints and small scratches on a disc can
affect playback and/or recording performance.
Please take proper care of your discs.
•
•
The company does not hold any responsibility to
compensate the contents which should have
been recorded, and any losses or damages (e.g.
losses of business profit, or business intermission) that may arise from malfunction of this
recorder (not recording/editing as intended).
If using a DVD-RW disc, make sure you change
the recording format (Video mode or VR mode)
before you record anything on the disc. See page
23 (Initialize) for how to do this.
•
When using a DVD-R or DVD+R disc, you can
keep recording until the disc is full, or until you
finalize the disc. Before you start a recording
session, check the amount of recording time left
on the disc.
•
When using a DVD-RW disc in Video mode or
DVD+RW disc, recording time available will only
increase if you erase the last title recorded on the
disc.
•
When using a DVD-RW disc in VR mode,
recording time available will increase if you erase
any title recorded on the disc.
•
The Delete Title option in the Title List (Original)
menu only hides the title, it does not actually
erase the title from the disc and increase the
recording time available (except for the last
recorded title on a DVD-RW disc in Video mode).
•
Overwrite recording is available using DVD+RW
discs.
•
When using a DVD+R/RW, the recorder will execute the Menu-making operation to update the new
title and editing when removing the disc from the
recorder.
Disc types and recording formats, modes,
and settings
This recorder can play many different kinds of DVD
discs: pre-recorded DVD-Video discs, DVD-RW,
DVD-R, DVD+RW, DVD+R discs. The disc format for
DVD-R, DVD+R, DVD+RW discs is always “Video
format”—the same as pre-recorded DVD-Video discs.
This means that once finalized, you can play a DVDR, DVD+R, or DVD+RW in a regular DVD player.
The DVD-RW disc format is Video Recording (VR)
format or Video format. You can change Recording
format, if required. (Reinitializing the disc will erase
the contents of the disc.)
The recording mode is closely related to the disc format. If the disc format is Video Recording format,
then the recording mode is VR mode; if the disc format is Video format, then the recording mode is
Video mode (except for DVD-Video, which is not
recordable, and so does not have a recording mode).
These can be changed as required for each recording and determine the picture quality and how much
space the recording will take up on the disc.
Notes for recording
•
The recording times shown are not exact
because the recorder uses variable bit-rate video
compression. This means that the exact recording time will depend on the material being recorded.
•
When recording a TV broadcast, if the reception
is poor or the picture contains interference, the
recording times may be shorter.
•
If you record still pictures or audio only, the
recording time may be longer.
Downloaded From DvDPlayer-Manual.com JVC Manuals
RECORDING
Recording
Recording time and picture
quality
There are four preset recording quality modes:
XP – Highest quality setting, gives about
1 hour of recording time on a DVD (4.7GB).
SP – Default quality, sufficient for most applications,
gives about 2 hours of recording time on a DVD (4.7GB).
LP – Slightly lower video quality, gives about 4
hour of recording time on a DVD disc (4.7GB).
EP – Low video quality, gives about 6 hour of
recording time on a DVD (4.7GB).
35
Basic Recording from a TV
Instant T imer Recording
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc or tape is full or you stop the recording.
Instant Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
1. Switch on the Recorder, select the device (VCR
or DVD) for recording and load a recordable disc
or tape. Also make sure that the TV input is set to
this recorder.
1. Follow steps 1-4 as shown left (Basic Recording
from a TV).
2. Press z REC repeatedly to select the recording
time length. Recording starts after the first press.
DVD: Each subsequent press increases the
recording time by 10 minutes.
2. Set a recording mode as necessary by pressing
REC MODE repeatedly.
VCR: Each subsequent press increases the
recording time by 30 minutes (maximum
540 minutes). Please confirm the VHS tape
has enough remaining time to be recorded
before recording.
DVD: XP, SP, LP, EP
VCR: SP, SLP
3. Select the TV channel to record.
4. Use AUDIO to select the audio channel for analog
channel or audio language for digital channel to
record.
The table below shows what will be recorded on
the different settings for different types of analog
broadcast. The last column (Monitor Audio) shows
what you’ll hear as it is recording.
TV Broadcast Selected
Audio
MONO
MONO
STEREO
STEREO
Left
Right
MONO
MONO+SAP MONO
SAP
STEREO
STEREO
+SAP
SAP
MONO
Broadcast Audio
L Ch R Ch
MONO MONO
L
R
L
L
R
R
MONO MONO
MONO MONO
SAP
SAP
L
R
SAP
SAP
MONO MONO
Monitor
Audio
MONO
STEREO
Left
Right
MONO
MONO
SAP
STEREO
SAP
MONO
If you set the audio channel to SAP, but there is
no SAP channel being broadcast, the main audio
(mono or stereo) will be recorded.
Checking the Recording Time
Press z REC or DISPLAY once to check the recording time. The recalled setting will automatically return
to the TV screen for a moment.
Also, remaining time of recording is shown in the display window.
To Extend the Recording Time
The recording time can be extended anytime by
pressing z REC.
Each subsequent press increases the recording time
by 10 minutes (DVD) or 30 minutes (VCR).
To Pause the Recording
1. Press PAUSE/STEP (X) to pause the recording.
2. When you want to continue recording, press
PAUSE/STEP (X) or z REC.
Notes:
5. Press z REC once to start recording.
The REC indicator lights in the display window.
•
If you press PAUSE/STEP (X) during the Instant Timer
Recording, it will be canceled.
6. Press STOP (x) to stop recording.
•
The Recorder will automatically power off when the
Instant Timer Recording ends.
Notes:
•
If the unit is DVD mode when the VCR Instant timer
recording ends, the unit will not automatically power off.
•
The maximum numbers of DVD titles are as show
below;
- DVD-R/RW: 99
- DVD+R/RW: 49
•
If the Recorder is powered off during DVD recording, the
recording will not be saved.
Downloaded
36 From DvDPlayer-Manual.com JVC Manuals
T imer Recording
The Timer Recording function allows you to record up
to 16 programs within a period of one month.
4. Enter the necessary information for your timer
recording(s).
• b / B (left/right) – Move the cursor left/right
• v / V (up/down) – Change the setting at the
current cursor position.
1. Press HOME and the Home menu appears.
2. Select [TV] > [Timer Record] and press ENTER.
•
Press RETURN (O) to return to the [Timer
Record List] menu.
5. Press ENTER to save the program.
6. Press RETURN (O) to exit the [Timer Record
List] menu.
•
The Timer indicator lights on the front panel
display.
•
The Recorder will record the audio according to
the current TV tuner setting. Use AUDIO to select
the audio channel for analog channel to record
before switching the Recorder to Standby mode.
•
For digital TV recording with multiple audio languages, set audio language from the [DTV Audio]
in sub-menu of the Setup menu (see page 21).
•
The Recorder will automatically power off when
the Timer Recording ends.
•
If the unit is DVD mode when the VCR timer
recording ends, the unit will not automatically
power off.
•
There is a short delay when a timer recording finishes to confirm the recorded program. If two
timer recordings are set to record sequentially
(one right after the other), the very beginning of
the later program may not be recorded.
•
You must press STOP (x) to stop the Timer
Recording.
3. Select [NEW] and press ENTER.
The Timer Record menu will appear.
•
[Media] – Choose a media (DVD or VCR).
•
[Ch.] – Choose a channel that memorized in
this Recorder, or one of the external inputs
from which to record (AV1 or AV2).
•
[Date] – Choose a date up to 1 month in
advance, or select a daily or weekly program.
•
[Start Time] – Set the recording start time.
•
[End Time] – Set the recording end time.
•
[Mode] – Choose a record mode.
DVD: XP, SP, LP, EP or AT (Auto)
VCR: SP, SLP or AT (Auto)
AT(Auto) mode determines how much time is available on the disc or tape and switches record mode,
if necessary, to complete recording the program.
•
[Set-Top Channel] – Choose a channel or
[OFF] for AV1 input timer recording.
RECORDING
Notes:
• You must insert a recordable disc or tape.
Checking Timer Recording Details
Programming can be checked whenever the
Recorder is turned on.
1. Press HOME and the Home menu appears.
2. Select [TV] > [Timer Record] and press ENTER.
3. Use v / V to select a program.
4. Press ENTER to edit the selected program.
Timer Record menu appears.
Canceling a Timer Recording
You can clear a timer setting anytime before the
recording actually starts.
• Use v / V to select a program you want to erase
on the [Timer Recorder List] menu, then press
CLEAR and select [OK] then press ENTER.
Downloaded From DvDPlayer-Manual.com JVC Manuals
37
Timer Recording Troubleshooting
Even though the timer is set, the recorder will not
record when:
•
There is no disc (or tape) loaded.
•
A non-recordable disc (or tape) is loaded.
•
Disc Protect is set to [ON] in the Disc menu
(see page 23).
•
There are already 99 titles (DVD-RW, DVD-R),
49 titles (DVD+RW, DVD+R) recorded on the
disc.
You cannot enter a timer program when:
•
A recording is already underway.
•
The time you’re trying to set has already
passed.
•
There are already 16 timer programs set.
If two or more timer programs overlap:
•
The earlier program takes priority.
•
When the earlier program finishes, the later
program starts.
•
If two programs are set to start at exactly the
same time, the program entered first takes
priority.
If the disc is damaged, the recording may not
complete successfully. In this case even though the
Check field shows [Rec. OK], it may not be.
To record one TV program while
watching another
1. Press TV/VCR to select the TV mode during
recording. The TV indicator appears.
2. Using the TV, select the channel to be viewed.
Tip (VCR mode only)
Always use PAUSE/STEP (X) for best results when making
changes during recording .
For example: To change channels during recording, first
press PAUSE/STEP (X) to put the unit in pause mode.
Then select the desired channel on the Recorder, and press
PAUSE/STEP (X) again to resume recording.
Downloaded
38 From DvDPlayer-Manual.com JVC Manuals
Dubbing from DVD to VCR
Dubbing from VCR to DVD
You can copy the contents of a DVD to a VHS tape
using the DUBBING button.
You can copy the contents of a VHS tape to a DVD
using the DUBBING button. This allows you to
archive your old VHS tapes to DVD.
1. Insert a blank VHS videotape into the VCR deck.
2. Insert the disc you wish to copy in the DVD deck
and close the disc tray.
1. Insert a blank DVD disc in the DVD deck and
close the disc tray.
3. Select DVD mode by pressing DVD on the remote
control or pressing DVD/VCR on the front panel.
2. Insert the VHS video tape you wish to copy into
the VCR deck.
4. Find the place on the DVD (or Disc) from which
you want to start dubbing using the PLAY, FF,
REW and PAUSE functions.
For best results, pause playback at the point from
which you want to record.
3. Select VCR mode by pressing VCR on the remote
control or pressing DVD/VCR on the front panel.
5. Press the DUBBING button.
The Dubbing menu appears.
4. Find the place on the VHS tape from which you
want to start dubbing using the PLAY, FF, REW
and PAUSE functions. For best results, pause
playback at the point from which you want to
record.
5. Press the DUBBING button.
The Dubbing menu appears.
7. Select [Dubbing] then press ENTER or DUBBING
to start copying.
6. Use v / V / b / B to select the desired Record
Rec. Mode: XP, SP, LP or EP.
8. To stop dubbing at any other time,
press STOP (x).
You must stop the dubbing process manually
when the DVD movie ends, or the unit may replay
and record over and over again.
7. Select [Dubbing] then press ENTER or DUBBING
to start copying.
8. To stop dubbing at any other time,
press STOP (x).
Dubbing will stop automatically when the VHS
tape ends.
Note:
If the DVD (or Discs) you are attempting to copy is
copy protected, you will not be able to copy the disc.
It is not permitted to copy Macrovision encoded
DVDs (or Discs). [Copy-protected. Cannot record.] is
displayed on the TV screen.
Note:
If the VHS video tape you are attempting to copy is
copy protected, you will not be able to copy the tape.
It is not permitted to copy Macrovision encoded
tapes.
Tip:
If you press PAUSE during Dubbing mode, both the
DVD and VCR decks go into Pause mode and the
DUBBING button blinks on the front panel. While in
Pause mode, you can adjust the DVD playback position using PLAY, REW, FF, PAUSE/STEP, etc. The
VCR deck will remain in Pause mode. To resume
Dubbing, press the DUBBING button twice.
Tip:
If you press PAUSE during Dubbing mode, both the
DVD and VCR decks go into Pause mode and the
DUBBING button blinks on the front panel. While in
Pause mode, you can adjust the VCR playback
position using PLAY, REW, FF, PAUSE/STEP, etc.
The DVD deck will remain in Pause mode.
To resume Dubbing, press the DUBBING button
twice.
Downloaded From DvDPlayer-Manual.com JVC Manuals
RECORDING
6. Use v / V / b / B to select the desired Record
Rec. Mode: SP or SLP (3 times SP).
39
Recording from External
Components
Simultaneous Play and
Record
You can record from an external component, such as
a camcorder or VCR, connected to any of the
Recorder’s external inputs.
You can play a DVD during the VCR recording, press
DVD to change DVD mode and perform the DVD
playback.
1. Make sure that the component you want to record
from is connected properly to the Recorder. See
page 17.
Notes:
• You cannot play or record both DVD and VCR at
the same time.
2. Press AUX repeatedly to select the external input
to record from.
•
AV1: Audio/Video Input mounted on back
panel.
•
AV2: Audio/Video Input mounted on front
panel.
•
DV: DV Input mounted on front panel.
3. Load a recordable disc or tape.
4. Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: XP, SP, LP or EP.
VCR: SP or SLP
5. Press z REC once to start recording.
The REC indicator lights in the display window.
6. Press STOP (x) to stop recording.
Notes:
Check that the Audio In settings DV Record Audio
are as you want them. See page 22.
•
•
If your source is copy-protected using
CopyGuard, you will not be able to record it using
this recorder. See Copyright on page 8 for more
details.
•
Recording continues until you press STOP (x) or
the disc is full.
•
To record for a fixed length of time, see [Instant
Timer Recording] on page 36.
•
When unit is on any external inputs mode (AV1,
AV2 and DV) the CH +/- buttons don’t work, press
AUX (on remote) repeatedly to select the TV
mode, and then select the TV channels.
Downloaded
40 From DvDPlayer-Manual.com JVC Manuals
•
You cannot change VCR mode during the DVD
recording mode.
•
If you wish VCR playback or record during the
DVD playback, press VCR to change VCR mode
and perform the VCR playback or recording.
Before DV dubbing
You can connect a DV-equipped camcorder to this
recorder using a single DV cable for input and output
of audio, video, data and control signals.
This recorder is only compatible with DV-format
(DVC-SD, DV25) camcorders. Digital satellite
tuners and Digital VHS video recorders are not
compatible.
You cannot connect more than one DV camcorder
at a time to this recorder.
You cannot control this recorder from external
equipment connected via the DV IN jack (including
two recorders).
It may not always be possible to control the connected camcorder via the DV IN jack.
Digital camcorders can usually record audio as
stereo 16-bit/48kHz, or twin stereo tracks of 12bit/32kHz. This recorder can only record one stereo
audio track. Set [DV Record Audio] option to Audio
1 or Audio 2 as required (see page 22).
Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
Picture disturbance on the recording may occur if
the source component pauses playback or plays an
unrecorded section of tape, or if the power fails in
the source component, or the DV cable becomes
disconnected.
Note:
This unit may not detect some camcorder.
Follow the steps below to solve the problem.
1. Turn off the camcorder.
2. Disconnect the DV cable and connect it again.
3. Turn on the camcorder.
Recording from a Digital Camcorder
You can record from a digital camcorder connected to
the DV IN jack on the front panel of this recorder.
Using the recorder’s remote, you can control both the
camcorder and this recorder.
Before recording, make sure that the audio input for
the DV IN jack is set up (see page 22).
Tips:
• The source signal must be DVC-SD format.
• Some camcorders cannot be controlled using this
recorder’s remote.
• If you connect a second recorder using a DV
cable, you cannot control the second DVD from
this one.
• You cannot control this unit remotely from a component connected to the DV IN jack.
• You cannot record date and time information from
a DV cassette.
Downloaded From DvDPlayer-Manual.com JVC Manuals
•
Disconnecting the DV cable while recording a
contents of the connected digital camcorder may
result in malfunction.
1. Make sure your digital camcorder is connected to
the front panel DV IN jack. See page 17.
2. Press AUX repeatedly to select the DV input.
3. Find the place on the camcorder tape that you
want to the recording to start from.
For best results, pause playback at the point from
which you want to record.
Depending on your camcorder, you can use
this recorder’s remote to control the camcorder
using the STOP, PLAY, BACKWARD, FORWARD and PAUSE functions.
4. Press z REC once to start recording.
Recording is automatically stopped if the
recorder detects no signal.
You can pause or stop the recording by pressing PAUSE/STEP (X) or STOP (x).
You cannot control the camcorder from this
Remote Control during recording.
In Video mode, the final frame of the recording
may remain displayed on screen for a while
after recording stops.
Note:
When ‘Not connected to camcorder’ shows on the TV
screen, the PLAY & RECORD functions won’t work.
To resume these functions, press AUX to get out of
DV input mode.
RECORDING
Recording from DV Input
Troubleshooting
If you cannot get a picture and/or audio through the
DV IN jack, check the bullet points:
Make sure the DV cable is properly connected.
Try switching off the connected equipment then
switch back on.
Try switching the audio input.
Note:
Depending on the connected camcorder, you may not
be able to control it using the Remote Control supplied
with this recorder.
41
Editing
T itle List and Chapter List
Menu Overview
1 2
3
4
5
67
Using the Title List menu you can edit video content.
The editing features available in the Title List menu
depend on whether you are editing video on DVD,
and whether you’re editing Original content, or a
Playlist.
There are two ways to edit VR mode DVD-RW discs.
You can directly edit the Original content of the disc,
or you can create and edit a Playlist. The Playlist
doesn’t actually change any of the content on the
disc, but just controls how the content is played back.
1. Press DISC MENU/LIST to display the TITLE
LIST menu.
Playback should be stopped when you do this.
When selecting titles, use the v / V buttons to
display the previous/next page if there are more
than six titles.
If you are editing a VR mode disc, press DISC
MENU/LIST to switch between Original and
Playlist menu.
On the left side of the screen are the menu
options. The main part of the screen shows
thumbnails of the titles (or chapter) on the DVD.
You can change these thumbnails using the
THUMBNAIL button. (see [Changing the Title
Thumbnails] on page 43.)
Press DISPLAY to display the information of
selected title on the Title List menu.
After selecting a title or chapter on the Title List
or Chapter List menu, then press ENTER. The
menu options on the left side of the menu. Use
v / V to select a option then press ENTER to
confirm your selection.
2. To exit the TITLE LIST menu, press
RETURN (O) repeatedly.
1. Menu options: To display menu option, select a
title or chapter then press ENTER. The options
displayed differ depending on the disc type.
• [Play] Start playback of the selected title or chapter.
The hidden titles and chapters on the DVD+R/RW
cannot be play back.
• [Search]
- [Chapter] ; Displays Chapter List of the Title.
- [Time] ; Search time for you want start point
of the title .
• [Delete] Deletes the title or chapter. (page 45)
• [Move] Moves chapter position on [Chapter List Playlist] menu (page 47).
• [Protect] Protects accidental recording, editing or
deleting of the title.(page 47)
• [Edit] Edits or Deletes a part of the title.
- [Title Name] Edits the title name. (page 46).
- [Delete Part] Deletes a part of the Title (page 45).
- [Divide] Divides a title into two (page 48).
- [Hide (Show)] Hides (or Shows) the selected title or
chapter. (page 47)
• [Playlist Add] Adds the title or chapter to the Playlist.
(page 44)
• [Dubbing] Dubs the title to VCR (page 39).
• [Title] Displays Title List of the chapter.
• [Combine] Combines two titles or chapters into one
(page 48).
• [Full Play] Starts playback of the selected title including the hidden chapters.
2. Current media.
3. Indicates the record mode, free space, and
elapsed time progress bar.
4. Currently selected title.
5. Thumbnail.
6. Shows the selected title number and total number
of titles.
7. Shows the title name, recorded date, and recording length.
Downloaded
42 From DvDPlayer-Manual.com JVC Manuals
VR Mode: Original and
Playlist Editing
Titles, Chapters and Parts
Titles in the disc’s original content contain one or
more chapters. When you insert a disc’s title into the
Playlist, all the chapters within that title also appear.
In other words, chapters in the Playlist behave exactly as chapters on a DVD-Video disc do. Parts are
sections of Original or Playlist titles. From the Original
and Playlist menu you can add or delete parts.
Adding a chapter or title to the Playlist creates a new
title made up of a section (ie., chapter) of an Original
title. Deleting a part removes part of a title from the
Original or Playlist menu.
Caution:
When editing using the Delete, Add and Move functions, the start and end frames may not be exactly
as set in the start and end point display.
During Playlist playback, you may notice a momentary pause between edits. This is not a malfunction.
Is editing a DVD like editing a video tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record
the edits. With DVD, you edit by making a ‘Playlist’ of
what to play and when to play it. On playback, the
Recorder plays the disc according to the Playlist.
About word ‘Original’ and ‘Playlist’
-RWVR
-RWVR
+RW
+R
You can create chapters within a title by inserting
chapter marks at the desired points.
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see [Auto Chapter] on page 22).
During recording or playing back, at the point you
want to start a new chapter, press CHAPTER.
A chapter marker icon appears on the TV screen.
Changing the Title Thumbnails
-RWVR
+RW
+R
Each title displayed in the Title List menu is represented by a thumbnail picture taken from the start of
that title or chapter.
If you prefer, select a different still picture from within
a title.
Press THUMBNAIL to make the currently displayed
picture the one that appears in the Title List menu.
The still picture that you choose appears in both the
Original or Playlist menu.
Tip -RWVR :
You can also change the thumbnail picture of the title
on the Chapter List menu. Select a chapter on the
Chapter List menu then press THUMBNAIL. The
thumbnail picture of the title that includes the chapter
is changed.
EDITING
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
Original: content refers to what’s actually recorded
on the disc.
Playlist: content refers to the edited version of the
disc — how the Original content is to be played.
Adding Chapter Markers
Downloaded From DvDPlayer-Manual.com JVC Manuals
43
Making a New Playlist
-RWVR
Use this function to add an Original title or chapter to
the Playlist. When you do this, the whole title or
chapter are put into the Playlist (you can delete bits
you don’t need later - see [Deleting an Original or
Playlist title/chapter] on page 45).
The title appears in the Playlist complete with the
chapter markers that appear in the Original. However,
if you add more chapter markers to the Original later,
these are not automatically copied over into the
Playlist title.
You can add up to 999 chapters to one disc.
Adding Additional T itle /
Chapters to the Playlist
-RWVR
You can add an Original title or chapter to add to a
Playlist title even if it is already registered.
1. Choose a title or chapter on the [TITLE LISTOriginal] menu or [Chapter List-Original] menu to
put into the Playlist, then press ENTER.
The menu options appears on the left side of the
screen.
2. Use v / V to select [Playlist Add] from menu
options then press B.
1. Choose a title or chapter on the [TITLE LISTOriginal] menu or [Chapter List-Original] menu to
put into the Playlist, then press ENTER.
The menu options appears on the left side of the
menu.
2. Use v / V to select [Playlist Add] option then
press B.
3. Choose a Title List-Playlist that is already registered to insert a title or chapter, then press
ENTER.
4. Repeat steps 1-3 to add additional title or chapter
on the Playlist.
You can view the added chapters on the [Chapter
List-Playlist] menu.
3. Select [New Playlist] then press ENTER.
The new title appears in the updated Playlist. All
chapters of the title are added to the Playlist.
5. Press RETURN (O) to exit, or DISC MENU/LIST
to go back to the [Title List-Original] menu.
Downloaded
44 From DvDPlayer-Manual.com JVC Manuals
Deleting an Original or
Playlist T itle/Chapter
When you erase a title or chapter from the Playlist
menu, you only remove it from the Playlist; the
title/chapter remains in the Original menu.
If you choose to delete a title or chapter from the
Original (title/chapter) menu, the title or chapter is
actually deleted from the disc and the remaining time
available for recording increases. Titles/chapters
deleted from the Original are also removed from the
Playlist.
Deleting a Part
-RWVR
You can delete a part which you do not want in the
title.
1. Use b / B / v / V to choose a title you want to
delete on the Title List menu then press ENTER.
The options appears on the left side of the menu.
2. Select [Edit] > [Delete Part] option then press
ENTER.
[Edit] menu appears on the TV screen.
Example: Edit (Delete Part) (DVD-VR)
Note:
It may not be possible to delete chapters that are less
than 3 seconds long.
1. Use b / B / v / V to choose a chapter or title you
want to delete on the [TITLE LIST] or [Chapter
List] menu then press ENTER.
The menu options appears on the left side of the
screen.
2. Select [Delete] option from the options on the
menu.
Example: Title List (DVD-VR)
3. Use play, pause step, search and slow-motion to
find the starting point.
4. Press ENTER at the starting point of the section
you want to delete.
[End Point] icon is highlighted.
The part is indicated on the Progress Bar.
5. Use play, pause step, search and slow-motion to
find the ending point.
4. Use b / B to select [OK] then press ENTER.
The selected chapter or title is deleted.
After pressing ENTER, the new, updated menu is
displayed.
5. Repeat steps 1 - 4 to continue to delete from the
menu.
7. If you finish to edit, select [Done] icon then press
ENTER.
The confirm message for deleting will appear.
Use b / B to select [OK] then press ENTER.
The selected part is deleted from the title and Title
List menu appears.
Notes:
6. Press RETURN (O) repeatedly to exit the menu.
•
Notes:
• When DVD+RW recording, the deleted title’s
name is changed to [Deleted Title].
It may not be possible to delete parts that are less than
3 seconds long.
•
If you select [Cancel] then press ENTER, the Recorder
will go to previous option and into Pause mode.
•
If more than two titles are repeatedly deleted, the
titles are combined into one.
•
When you are deleting a title or chapter, only the
last one on DVD+R/RW increases remaining
recording time.
Downloaded From DvDPlayer-Manual.com JVC Manuals
EDITING
3. Press ENTER to confirm.
The confirm message for deleting will appear.
6. Press ENTER at the ending point of the section
you want to delete.
You can cancel the selected point, use v / V to
select [Cancel] icon then press ENTER.
45
Naming a T itle
You can name the titles.
1. Choose the title you want to name on the Title List
menu, then press ENTER.
The menu options appears on the left side of the
menu.
2. Use v/V to select [Edit] > [Title Name] option then
press ENTER.
Keyboard menu appears.
Notes:
• Names can be up to 32 characters long.
•
For discs formatted on a different recorder, you
will see only a limited character set.
•
When recording on DVD-R, DVD-RW or DVD+R
discs, the entered name is displayed on the DVD
player only after finalization.
T ime Search
You can select start point of the title.
1. Use b / B / v / V to choose a title on the TITLE
LIST menu then press ENTER.
The options appears on the left side of the menu.
2. Select [Search] > [Time] option then press
ENTER.
[Time] menu appears on the TV screen.
3. Enter a name for the title. Use b / B / v / V to
select a character then press ENTER to confirm
your selection.
•
Language: Selects a keyboard type.
•
Space: Inserts a space at the cursor position.
•
Delete: Deletes the character to the left of the
cursor position.
•
•
b / B: Moves the cursor left or right.
OK: Confirms the name you have entered.
•
Cancel: Deletes all characters and exits the
Keyboard menu.
Remote Control buttons for entering a name
•
N): Inserts a space at the cursor posiPLAY (N
tion.
•
PAUSE/STEP (X): Deletes the character to
the right of the cursor position.
•
SKIP (. / >): Moves the cursor left or
right.
•
STOP (x), CLEAR: Deletes the character to
the left of the cursor position.
•
0-9: Enters the character corresponding to the
selected column.
•
DISC MENU/LIST, DISPLAY: Switches the
keyboard type.
4. Choose [OK] then press ENTER to fix the name
and return to the previous menu screen.
5. Press RETURN (O) repeatedly to exit the menu.
Downloaded
46 From DvDPlayer-Manual.com JVC Manuals
End time
Current picture
Selected time
Selected point
Start time
3. Use b / B to find the point you want to start.
The point increase 1 minute step.
If you press and hold b / B then the point
increase 5 minute step.
4. Press ENTER to start selected point.
Moving a Playlist Chapter
-RWVR
Use this function to re-arrange the playing order of
Playlist chapters on the Chapter List-Playlist menu.
Note:
This function is not available if there is only one
chapter.
1. Select a chapter on the Chapter List-Playlist
menu.
2. Press ENTER.
The menu options appears on the left side of the
menu.
3. Use v / V to select [Move] option from Playlist
options then press ENTER.
Tip:
If you select a hidden chapter or title on the TITLE
LIST or Chapter List menu, you can ‘show’ it by
choosing [Show] option on the menu. After doing that,
you are able to see the chapter or title.
Protect a T itle
+RW
+R
-RWVR
Use this function to protect against accidental recording, editing or deleting of the title.
1. Press DISC MENU/LIST to display the [TITLE
LIST] menu.
2. Use v V b B to choose a title you want to protect
then press ENTER.
Options appear on the left side of the screen.
3. Select [Protect] from the options.
Example: Title List (DVD-VR)
4. Use b / B / v / V to choose the place you want to
move the chapter then press ENTER.
After pressing ENTER, the updated menu is
displayed.
+RW
+R
You can skip playing chapters or titles without deleting from the disc.
1. Use v V b B to choose a chapter or title you
want to hide on the [TITLE LIST] or [Chapter List]
menu, then press ENTER.
Options appear on the left side of the screen.
Tip:
If you select a title that has already been protected
on the Title List menu, you can ‘unprotect’ it by
choosing [Unprotect] option from the Title List menu
options. After doing that, you can edit and delete the
title.
EDITING
Hide a Chapter/T itle
4. Press ENTER to confirm.
The lock mark will appears on the title’s
thumbnail.
2. Select [Edit] > [Hide] option.
Example: Title List (DVD+RW)
3. Press ENTER to confirm.
The chapter’s or title’s thumbnail will dim.
Downloaded From DvDPlayer-Manual.com JVC Manuals
47
Divide One T itle Into Two
+RW
Combining Two Chapters
Into One -RWVR +RW +R
Use this command to split a title up into two new
titles.
Use this function to combine two adjacent chapters
into one.
1. On the Title List menu, select a title you want to
divide then press ENTER.
The menu options appears on the left side of the
screen.
1. On the Chapter List menu, select the second
chapter of the two chapters you want to combine
then press ENTER.
The menu options appears on the left side of the
screen.
2. Select [Edit] > [Divide] option.
2. Use v / V to select [Combine] option.
The combine indicator appears between the two
chapters you want to combine.
Example: Title List (DVD+RW)
Example: Title List (DVD-VR)
3. Press ENTER.
[Edit (Divide)] menu appears.
Current picture
The first title’s
thumbnail
The second
title’s thumbnail
4. Use play, pause step, search and slow-motion to
find the point you want to divide the title.
5. Select [Divide] option then press ENTER at the
point.
To reset the point, select [Cancel] option then
press ENTER. Repeat from step 4.
6. Choose [Done] option then press ENTER to fix
the dividing point.
The title is divided into two new titles. It take up to
4 minutes to divide.
Note:
The diving point may not be selected if the point is
less than 3 seconds long.
Downloaded
48 From DvDPlayer-Manual.com JVC Manuals
3. Press ENTER to combine the chapters.
4. Repeat steps 1 - 3 to continue to combine from
the menu.
5. Press RETURN (O) repeatedly to exit the menu.
Notes:
This function cannot operate listed as below;
•
If there is only one chapter within the title.
•
If you select first chapter.
•
If two chapters created by erasing a part from an
original title.
•
If two chapters created from different titles.
•
If two chapters created by moving an order from an
original title.
Overwriting Recording
+RW
To overwrite a new video recording on a previously
recorded title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end
of the Disc.
2. On DVD mode, press TITLE in Play mode or Stop
mode.
Title List menu will appear as shown below.
1. Select input source you want to record
(TV channel, AV1-2).
2. Press DISC MENU/LIST to display the TITLE
LIST menu.
3. To play back a title, select the title you want then
press ENTER or PLAY (N).
Tip:
You can remove the Title List menu by pressing
STOP (x).
4. Press z REC to start overwrite recording.
Overwrite recording starts from the start point of
the title.
5. Press STOP (x) to stop the overwrite recording.
The new title is created and updated menu is displayed.
Notes:
• This function is not available for a protected title.
•
•
If the overwrite is longer than the recording
length of the current title, the next title is overwritten. But if next title is protected, the overwriting stops at the starting point of the title.
If the selected title’s recording length is less than
10 seconds, the next title is overwritten. But if the
next title is protected, overwriting stops.
V iewing T itle List menu
displayed on other DVD
Recorders or Players
+RW
+R
You can view the Title List menu displayed on the
other DVD player that is capable of playing DVD+RW
or DVD+R discs.
1. Insert DVD+R or DVD+RW disc recorded already.
Downloaded From DvDPlayer-Manual.com JVC Manuals
Playing Your Recordings on
Other DVD Players
(Finalizing a Disc)
Most regular DVD players can play finalized discs
recorded in Video mode, finalized DVD+R or
DVD+RWs. A small number of players can also play
DVD-RW discs recorded in VR mode, finalized or not.
Check the manual that came with the other player to
check what formats of discs it will play.
Finalizing ‘fixes’ the recordings and editings in place
so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM
drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. The menu can be accessed
by pressing DISC MENU/LIST or TITLE.
To finalize a disc, refer to [Finalize] on page 23.
EDITING
3. Use v V b B to choose a title you want to
overwrite.
Notes:
• Unfinalized DVD+RW is playable on regular DVD
players.
•
The edited contents of a DVD+RW disc is compatible on regular DVD players only after
finalization.
•
Any edited contents of the DVD+R disc are not
compatible on regular DVD players.
(Hide, chapter combine, added chapter mark, etc.)
•
How long finalization takes depends on the type
of disc, how much is recorded on the disc, and
the number of titles on the disc.
49
Reference
Language Code List
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Code List
Choose a area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
FI
FR
DE
GB
GR
GL
Heard and McDonald Islands HM
Hong Kong
HK
Hungary
HU
India
IN
Indonesia
ID
Israel
IL
Italy
IT
Jamaica
JM
Japan
JP
Kenya
KE
Kuwait
KW
Libya
LY
Luxembourg
LU
Downloaded
50 From DvDPlayer-Manual.com JVC Manuals
Area
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Code
MY
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
RU
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
Correction
No power.
The power cord is disconnected.
Plug the power cord into the wall outlet securely.
Abnormal or no picture.
The TV is not set to receive Recorder
signal output.
Select the appropriate video input
mode on the TV so the picture from
the Recorder appears on the TV
screen.
The video cable is not connected
securely.
Connect the video cable into the jacks
securely.
Unit output setting and TV resolution
capabilities mismatch.
Check TV capability.
Check mode of connections
(eg. S-Video, Components etc.).
Wrong connection.
Check the connection.
The equipment connected with the
audio cable is not set to receive
Recorder signal output.
Select the correct input mode of the
audio receiver so you can listen to the
sound from the Recorder.
The audio cables are not connected
securely.
Connect the audio cable into the jacks
securely.
The power of the equipment connected
with the audio cable is turned off.
Turn on the equipment connected with
the audio cable.
The AUDIO options are set to the wrong
position.
Set the AUDIO options to the correct
position.
In HDMI mode, audio selection is not
set to PCM.
Change AUDIO setup to PCM mode.
The disc is dirty.
Clean the disc.
The TV channels are not tuned in properly.
Check tuning, carry out tuning again.
Tape heads are dirty.
Clean video heads.
Tape is a rental or was recorded on
another VCR.
Use CH (v/V) for manual tracking
adjustment while tape is playing.
Picture from external
input is distorted.
The video signal from the external
component is copy-protected.
You cannot connect via the Recorder.
Connect the component directly to
your TV.
Some channels are
skipped over when
using CH (+/-).
The skipped channels were deleted with
the Channel Edit option.
Use the [Channel Edit] option to
restore channels. See page 20.
No sound.
The playback picture is
poor.
Downloaded From DvDPlayer-Manual.com JVC Manuals
REFERENCE
Check unit Resolution setting according to TV capability and mode of connection.
51
Cause
Symptom
Correction
No disc is inserted.
No tape is inserted.
Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
An unplayable disc is inserted.
Insert a playable disc. (Check the disc
type and Regional code.)
The disc is placed upside down.
Place the disc with the playback side
down.
The disc is not placed within the
guide.
Place the disc on the disc tray correctly
inside the guide.
The disc is dirty.
Clean the disc.
The Rating level is set.
Cancel the Rating function or change
the rating level.
Video tape cannot be
inserted.
A cassette tape was inside already.
Eject the tape first and then insert the
tape you want to use.
The Remote Control
does not work properly.
There is an obstacle in the path of the
Remote Control and this unit.
Remove the obstacle.
The batteries in the Remote Control
are exhausted.
Replace the batteries with new ones.
The Remote Control is not pointed at
the remote sensor of the Recorder.
Point the Remote Control at the remote
sensor of the Recorder.
The Remote Control is too far from
the Recorder.
Operate the Remote Control within
23ft (7m).
This Remote Control use the same
buttons for VCR and DVD functions
(ex.PLAY).
When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
The current remote control code dose
not match the unit.
Identify the remote control code with
the code of unit (See page 26).
Camcorder image is
not shown.
Camcorder is off.
Turn camcorder on and operate
properly.
Camcorder image via
A/V input or DV IN to
Recorder is not shown
on TV screen.
The recorder’s source is incorrect.
Use AUX to select input channel (AV1,
AV2 or DV IN).
Timer recording is not
possible.
Clock in record is not set to
correct time.
Set clock to correct time.
Timer has been programmed
incorrectly.
Reprogram Timer.
(TIMER Record) indicator light does
not appear after programming timer.
Reprogram Timer and turn the
Recorder off to enable timer.
The Recorder does not
start playback.
Downloaded
52 From DvDPlayer-Manual.com JVC Manuals
Correction
Cause
Picture or sound of
broadcasting channel is
weak or missing.
Antenna or cables are loose.
Tighten connections or replace cable.
Wrong Tuning Band is selected in the
Recorder Setup menu.
Try [Auto Channel Set] options; see
page 20 for details.
Can’t play disc recorded
on this Recorder on
another DVD player.
The disc was recorded in Video mode.
Finalize the disc; see page 23.
Some players will not play even a
finalized disc recorded in Video mode.
No solution.
The disc was recorded in VR mode.
The other player must be RW
compatible in order to play it.
Discs recorded with copy-once material cannot be played on other players.
No solution.
The remaining blank space on the
disc is insufficient.
Use another disc.
The source you are trying to record is
copy-protected.
You cannot record the source.
When setting the recording channel,
the channel is tuned on the TV’s own
tuner.
Select the channel on the Recorder’s
built-in TV tuner.
When recording to a Video mode disc,
programs that are copy-once protected cannot be recorded.
Use a VR mode formatted disc for
copy-once material.
TV is not Stereo-compatible.
No solution.
Broadcast program is not in stereo format.
No solution.
Recorder A/V Out jacks are not
connected to TV A/V In jacks.
Make A/V connections. Stereo is available only via A/V output from Recorder.
Recorder Audio/Video Out is not
selected for viewing at the TV.
Select AUX or A/V source as TV input.
Recorder’s TV audio channel is set to
SAP or MONO.
Set TV audio channel mode to Stereo.
See [Changing TV Audio Channel] on
page 25.
Cannot record or did
not record successfully.
Stereo Audio Record
and/or Playback not
present.
Resetting the Recorder
You can reset the Recorder as follows:
•
Press and hold the STANDBY/ON button for
more than five seconds. This will force the
Recorder to power off.
Press the STANDBY/ON button again to turn
the Recorder back on.
•
Unplug the power cord and then plug the
power cord again after more than five seconds.
If you observe any of the following symptoms...
•
When the Recorder is plugged in, but the
power will not turn on or off.
•
When the display window is not working.
•
When the Recorder does not operate
normally.
Downloaded From DvDPlayer-Manual.com JVC Manuals
REFERENCE
Symptom
53
Specifications
General
Power requirements
AC 120V, 60 Hz
Power consumption
32W
Dimensions (approx.)
430 X 78.5 X 260 mm (16.9 x 3.1 x 10.2 inches) (w x h x d)
Net Weight (approx.)
5.8 kg (12.79 lbs)
Operating temperature
Operating humidity
Signal system
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
NTSC, DTV standard ATSC or Clear QAM over cable
Recording
Recording format
DVD VideoRecording, DVD-VIDEO
Recordable discs
Recordable time
DVD+/-Recordable; DVD+/-Rewritable
DVD; Approx. 1 hour (XP mode), 2 hours (SP mode),
4 hours (LP mode), 6 hours (EP mode)
VCR; SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
Video recording format
Sampling frequency
27MHz
Compression format
MPEG 2 (VBR support)
Audio recording format
Sampling frequency
48kHz
Compression format
Dolby Digital
VCR Specifications
Head system
Timer
Tape speed
Tape width
Rewind time
Antenna
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
About 180 seconds (T-120)
75 ohms (VHF/UHF)
VHF output signal
Channel 3 or 4 (Switchable)
Channel coverage
Analog (VHF: 2-13, UHF: 14-69, CATV: 1-135)
Digital (Terrestrial: 2-69, Cable: 1-135)
Frequency range
Signal-to-noise ratio
20Hz to 20kHz
43dB
Dynamic range
88 dB
Channel separation
60 dB
Downloaded
54 From DvDPlayer-Manual.com JVC Manuals
DVD Specifications
Laser system
Semiconductor laser, wavelength 650 nm
Frequency response
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz
Signal-to-noise ratio
More than 95dB
Harmonic distortion
Less than 0.008%
Dynamic range
More than 90 dB
Inputs
ANTENNA IN
Antenna or CATV input, 75 ohms
VIDEO IN (AV1,2)
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2
AUDIO IN (AV1,2)
- 6.0 dBm more than 47 kohms, RCA jack (L, R) x 2
DV IN
4 pin (IEEE 1394 standard)
Outputs
VIDEO OUTPUT
S-VIDEO OUTPUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
COMPONENT OUTPUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, RCA jack x 2
HDMI video/audio output
19 pin (HDMI standard, Type A)
Audio output (digital audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
Audio output (optical audio)
Optical connector x 1
Audio output (analog audio)
1 kHz, -6 dBm, 600 Ω, RCA jack (L, R) x 2
ANTENNA OUT
Channel 3 or 4 (Switchable)
Accessory:
Audio cable (L, R) . . . . . . . . . . . . . . . .1
Remote Control . . . . . . . . . . . . . . . . . .1
REFERENCE
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Design and specifications are subject to change without notice.
Downloaded From DvDPlayer-Manual.com JVC Manuals
55
WARRANTY (Only in U.S.A.)
Downloaded
56 From DvDPlayer-Manual.com JVC Manuals
FOR SERVICING (Only in U.S.A.)
DR-MV99BU
Downloaded
From DvDPlayer-Manual.com JVC Manuals
7
Printed in Indonesia
US 0307MNH-OT-OT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement