Project/Location: Contractor: LMCEB6L & LMCSB6L Series Date: Prepared by: All Metal Exit Sign Lumacell Model: FEATURES TYPICAL SPECIFICATIONS •All-metal construction using Canadian cold-rolled steel •Consult Ordering Information for complete details •Long-life, energy efficient ALINGAP technologie LED light source Supply and install the Lumacell® bilingual LMCEB6L Series LED Exit Sign. The equipment shall operate with universal AC input voltage of 120 to 347VAC at less than 3W and universal two-wire DC input voltage from 6VDC to 24VDC at less than 3.5W for single and double face signs. The frame shall be of a onepiece steel construction and have a maximum depth of 2-1/8”. The faceplate(s) shall be steel and come standard with knockout chevrons. The equipment shall have two (2) canopies that shall fasten for installation in ceiling-mount applications. The light source shall be light emitting diodes (LED). The LED lamps shall provide illumination in normal and emergency operation and shall be mounted inside the exit housing, not on the face. Red LED technology shall be ALINGAP. An LED-sensitive diffuser shall be mounted behind the legend to provide the 6” high by 3/4” stroke letters with even illumination. The Exit Sign in a Self-Powered configuration shall stay illuminated during minutes upon AC failure. emergency operation for at least The Exit Sign shall be CSA-C860 approved. The equipment shall be Lumacell® Model: . completely enclosed in an acrylic module •Single illumination module lights both single and double face Exit Signs •Highly energy efficient – consumes less than 5.5W •Normal AC and emergency DC operation 120 to 347VAC input; 6 to 24VDC input •CSA certified, meets or exceeds C860 requirements DIMENSIONS Dimensions are approximate and subject to change. 73/8” [19 cm] LMCEB6L 285/8” [73 cm] LMCSB6L 73/8” [19 cm] 71/2” [19 cm] 83/4” [22 cm] 45/8” [12 cm] WIRE GUARDS 285/8” [73 cm] 21/8” [5 cm] 460.0059-L Wall Mount 460.0092-L Ceiling Mount POWER CONSUMPTION AND UNIT RATING MODEL AC SPECS DC SPECS AC/DC standard, red 120 to 347VAC Less than 3W 6 to 24VDC Less than 3.5W AC/special DC, red 120/277/347VAC Less than 5W 36 or 48 or 120VDC Less than 5W Self-Powered red 120 to 347VAC Less than 5.5W Nickel-Cadmium Battery Min. 60 or 120 minutes ORDERING INFORMATION SERIES LMCE= exit/sortie 6” letters LMCS= sortie/exit 6” letters FACES 1B6L= s ingle face 2B6L= d ouble face APPROVAL C860 COLOUR Blank= factory white SG= silver grey TG= textured grey * Other colours available. Consult your sales representative. VOLTAGE OPTIONS UNIV= 120 to 347VAC, 24VDC 120VACDC2= 120VAC, 120VDC, 2 wires UNIV36= 120/277/347VAC, 36VDC, 4 wires UNIV48= 120/277/347VAC, 48VDC, 4 wires UNIV120= 120/277/347VAC, 120VDC, 4 wires SP= Self-Powered 120 to 347VAC, 60 min. duration SP2= S elf-Powered 120 to 347VAC, 120 min. duration Blank= 2 canopies supplied TP= tamper proof screws VRTP= polycarbonate shield with tamper proof screws 3C= 3 canopies 990.0119-L= tamper proof bit* * One bit needed per order. EXAMPLE: LMCE1B6LC860UNIV www.lumacell.com 45
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021