LER400 Series Extruded Aluminum Exit Sign FEATURES TYPICAL SPECIFICATIONS

LER400 Series Extruded Aluminum Exit Sign FEATURES TYPICAL SPECIFICATIONS
Project/Location:
Contractor:
Date:
LER400 Series
Prepared by:
Extruded Aluminum Exit Sign
FEATURES
TYPICAL SPECIFICATIONS
•Durable extruded, one-piece aluminum housing
•Long-life, energy efficient ALINGAP technology red LED light source
completely enclosed in acrylic module
•Single LED module lights both single and double face Exit Signs
•Highly energy efficient – consumes less than 2.5W in
AC or DC mode
•Normal AC and emergency DC operation – 120, 277 or 347VAC input;
6 to 24VDC input
•Also available with power pack; see 3LER400 catalogue sheet
•CSA certified, meets or exceeds C860 requirements
DIMENSIONS
Dimensions are approximate and subject to change.
43/4” [11.9 cm]
Lumacell Model:
Supply and install the Lumacell ® LSR400 Series LED “SORTIE’’ Exit
Signs. The equipment shall operate with universal AC input voltage of
120VAC, 277VAC or 347VAC at less than 1.5W and universal two-wire DC
input voltage from 6VDC to 24VDC at less than 1.5W for single or double
face signs.
The housing shall be constructed of rugged extruded aluminum and have a
maximum depth of 2-1/2” (6.35cm). The faceplate(s) shall be constructed of
extruded aluminum and come standard with knockout chevrons.
The light source shall be light emitting diodes (LED). The LED lamps shall provide
illumination in normal and emergency operation and shall be mounted inside
the exit housing, not on the face. The red LED technology shall be ALINGAP. An
LED-sensitive diffuser shall be mounted behind the legend to provide the 6”
(15cm) high by 3/4” (1.9cm) stroke letters with even illumination. The Exit Sign in
a Self-Powered configuration shall stay illuminated during emergency operation
for at least 90 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved.
.
The equipment shall be Lumacell® Model:
73/4” [19.7 cm]
83/4” [22.3 cm]
WIRE GUARDS
131/8” [33.3 cm]
460.0079-L
Wall Mount
460.0027-L
End Mount
460.0028-L
Ceiling Mount
21/2” [6.3 cm]
141/8” [35.9 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/ standard DC, red
120/277/347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
AC/ special DC, red
120/277/347VAC
Less than 1.5W
36 or 48 or 120VDC
Less than 2.5W
Minimum 90 minutes
Self-Powered, red
120 to 347VAC
Less than 3W
Nickel-Cadmium battery
AC/ standard DC, green
120 to 347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
Self-Powered, green
120 to 347VAC
Less than 3.5W
Nickel-Cadmium battery
Minimum 60 minutes
ORDERING INFORMATION
SERIES
FACES
LER= LED exit
450= single face universal
mount
460= double face universal
mount
COLOUR
VOLTAGE
Blank= factory white
BK= black
SG= silver grey
BA= brushed aluminium
TA= textured aluminium
PW= polar white
UNIV= 120/277/347VAC, 6 to 24VDC
120VACDC2= 120VAC 120VDC, 2 wires
UNIV36= 120/277/347VAC, 36VDC, 4 wires
UNIV48= 120/277/347VAC, 48VDC, 4 wires
UNIV120= 120/277/347VAC, 120VDC, 4 wires
SP= 120 to 347VAC, Self-Powered
OPTIONS
TP= tamper proof screws
VRSTP= vandal resistant shield and tamper proof screws*
GN= green legend
990.0119-L= tamper proof bit**
* One bit needed per order.
** Indicate single or doube face.
EXAMPLE: LER450UNIV
32
www.lumacell.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement