Catalogue Sheet: LPEX50 Series

Catalogue Sheet: LPEX50 Series
Project/Location:
LPEX50 Series
Contractor:
Date:
Extruded Aluminum
Exit Sign
Prepared by:
Features
Typical specifications
• Long-life, energy-efficient ALINGAP technology red LED light
source completely enclosed in acrylic module
Supply and install the Emergi-Lite® LPEX50 Series LED Exit Signs.
The equipment shall operate with universal AC input voltage of
120VAC, 277VAC or 347VAC at less than 1.5W and universal two-wire
DC input voltage from 6VDC to 24VDC at less than 1.5W for single or
double face signs.
• Durable, extruded, one-piece aluminum housing
• Single illumination module lights both single and double face exit
signs
The housing shall be constructed of rugged extruded aluminum and
have a maximum depth of 2-1/2”. The faceplate(s) shall be constructed of extruded aluminum and come standard with knockout
chevrons.
• Highly energy efficient – consumes less than 2.5W in AC or DC
mode
• Normal AC and emergency DC operation –
120/277/347V AC input; 6 to 24V DC input
The light source shall be light emitting diodes (LED). The LED lamps
shall provide illumination in normal and emergency operation and
shall be mounted inside the exit housing, not on the face. The red
LED technology shall be ALINGAP. An LED-sensitive diffuser shall
be mounted behind the legend to provide the 6” high by 3/4” stroke
letters with even illumination. The Exit Sign in a Self-Powered
configuration shall stay illuminated during emergency operation for
at least 90 minutes upon AC failure.
• Comes with the Emergi-Lite® EZ2 canopy for quick and
easy installation
• Also available with power pack; see LPEX50-P catalogue sheet
• CSA certified, meets or exceeds CSA 22.2 No. 141 requirements
Dimensions
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No.141
Dimensions are approximate and subject to change.
The equipment shall be Emergi-Lite® Model:
.
73/4” [19.7 cm]
83/4” [22.3 cm]
43/4” [11.9 cm]
Wire guards
460.0079-E
13 ” [33.3 cm]
1/8
21/2” [6.3 cm]
141/8” [35.9 cm]
Wall Mount
460.0027-E
End Mount
460.0028-E
Ceiling Mount
POwer consumption
Model
AC Specs
DC Specs
AC/ standard DC, red
120/277/347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
AC/ special DC, red
120/277/347VAC
Less than 1.5W
36 or 48 or 120VDC
Less than 2.5W
Minimum 90 minutes
Self-Powered, red
120 to 347VAC
Less than 3W
Nickel-Cadmium battery
AC/ standard DC, green
120 to 347VAC
Less than 1.5W
6 to 24VDC
Less than 1.5W
Self-Powered, green
120 to 347VAC
Less than 3W
Nickel-Cadmium battery
Minimum 90 minutes
ordering information
Series
Faces
colour
LPEX5= LED EXIT
2= single face,
universal
mount
3= double face,
universal
mount
W= factory white
B= black
BA= brushed aluminum
TA= textured aluminum
W= polar white
mounting
-U= 120/277/347VAC, 6 to 24VDC
-EM120-2W= 120VAC, 120VDC 2 wires
-U36= 120/277/347VAC - 36VDC
-U48= 120/277/347VAC - 48VDC
-U120= 120/277/347VAC - 120VDC
-I= 120 to 347VAC Self-Powered
options
-TP= tamper-proof screws
-VRSTP= v andal resistant shield with
tamper-proof screws*
-G= green legend
990.0119-E= tamper-proof bit**
*Indicate single or double face.
**One bit needed per order.
EXAMPLE: LPEX52W-U-VRTP
34
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement