Century 1060S SDU2 [0501058] [01/2000]

Century 1060S SDU2 [0501058] [01/2000]
CENTURY
L E G E N D A R Y
®
L E A D E R S H I P
OWNER'S MANUAL
1060S / SDU2
INSTALLATION, OPERATION, MAINTENANCE & PARTS
NOTE: MANUAL including SPECIFICATIONS, subject to change without notice
All ratings specified are based on structural factors only,
not vehicle capacities or capabilities.
CENTURY®
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Phone (423) 238-4171 • FAX (423) 238-5371
FORM NO. 0501058
01 / 2000
PRICE $25.00
LIMITED WARRANTY
MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the
original purchaser that each new MILLER wrecker or other MILLER products will be free from defects in
material and workmanship for a period of twelve (12) months from date placed in service, but in no event
shall such warranty period exceed twenty-four (24) months from date of manufacture by MILLER. The
purchaser must promptly notify MILLER in writing of any failure in material or workmanship. In no event
shall MILLER accept such notification later than twenty-four (24) months from date of delivery or twelve
(12) months from date placed in service, whichever is earlier.
MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement at
the MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon
inspection by MILLER to be defective in material or workmanship. New or remanufactured parts will be
used for any replacement at MILLER's option. This warranty is not transferable. This warranty does not
obligate MILLER to bear the cost of labor or transportation charges in connection with the repair or
replacement of any parts found to be defective, nor shall it apply to a product upon which repairs or
alterations have been made unless authorized by MILLER.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER
WARRANTY, EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. MILLER shall in no event be liable for claimed downtime,
claimed loss of profits or goodwill, or any other special, incidental, indirect, or consequential damages
concerning or relating to any product or parts, whether based on negligence, strict liability, breach of
contract, breach of warranty, misrepresentation or any other legal theory, regardless of whether the loss
resulted from any general or particular requirement which MILLER knew or had reason to know about at
the time of sale.
MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS
MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER TO
PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed or any
accessories or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT OR
PRODUCTS. This language shall in no way affect or diminish the rights of the purchaser to rely on such
warranties as are extended by such manufacturers or suppliers. MILLER shall, to the extent permitted
under applicable law, pass on to the purchaser such manufacturer's or seller's warranty.
MILLER, whose policy is one of continuous improvement, reserves the right to improve its products
through changes in design or materials as it may deem desirable without being obligated to incorporate
such changes in products previously sold. This warranty is not intended to cover or include the following
items, which are set forth by way of example and not limitation:
A. Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to
weather, road conditions, road treatments, etc.
B. Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs, failure
to provide reasonable and necessary maintenance, or uses for which the equipment was not
designed or intended.
C. Alterations or modifications that affect performance, operation or reliability.
D. Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud
flaps, fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts.
IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER
PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY
OTHER IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Telephone (423) 238-4171
SERIAL NUMBER
Section VI - PARTS
This Section is provided by the manufacturer for the purpose of ordering
any component part of the 1060S Recovery Unit and SDU/2 Underlift that
may be required when part replacement is necessary.
Be certain to use only original equipment replacement parts for warranty
purposes as well as for keeping your 1060S Recovery Unit and SDU/2
Underlift in its original state and optimum operating capacities.
When ordering replacement or spare parts be sure to provide the following
information to the manufacturer’s Parts Department.
1.
2.
3.
4.
5.
6.
7.
Manual Number & Date of Publication
Manual Page Number
Page Title
Reference Number of Part Desired
Part Number
Part Description
Quantity of Part Desired
Providing this information will help ensure that the correct parts will be
delivered to you in an expedient manner. Should additional information be
required for repair or replacement of certain components, contact your
Wrecker Manufacturer Authorized Representative.
The Manufacturer reserves the right, without notice or obligation, to improve
or modify their products, which may change the specifications, models and
feature availability.
VI-1
Section VI - PARTS (cont'd)
SUBFRAME ASSEMBLY
VI-2
Section VI - PARTS (cont'd)
SUBFRAME ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
3 FT.
8
16
7 FT.
20
4
8
8
16
15
8
4
2
1
2
1
1
1
1
0301851
0302540
0302541
0303056
0400066
0400276
0400281
0400294
0400430
0400452
0400506
0400508
0707194
0710537
0712204
0714342
0714343
0804114
0804240
TRIM-LOK, 1/8"
CENTER BONDED MOUNT
SPECIAL WASHER
"D" GASKET (NOT SHOWN)
SCREW, 1/4"-20 X 3/4" HEX HD CAP
SCREW, 5/8"-11 X 4-1/2" HEX HD CAP
SCREW, 3/4"-10 X 3-1/2" HEX HD CAP
SCREW, 3/4"-10 X 6-1/2" HEX HD CAP
NUT, 3/4"-10 HEX NYLOK
LOCKWASHER, 1/4" HELICAL
WASHER, 5/8" FLAT
LOCKWASHER, 5/8" HELICAL
COVER, SPADE TUBE
PLATE, VALVE COVER
REINFORCEMANT, OUTER TUBE
COVER, LT CHAIN BOX
COVER, RT CHAIN BOX
CYLINDER COVER WELDMENT
1060S - SDU/2 SUBFRAME WELDMENT
-20
21
22
-2
2
2
0902553
0400564
0708452
GA0215
"D" RING KIT (NOT SHOWN)
ROLL PIN, 3/8" X 1-3/4" (NOT SHOWN)
"D" RING, TOWING (NOT SHOWN)
PIN, "D" RING (NOT SHOWN)
-23
24
25
26
-2
2
2
4
0903729
0303445
0400211
0400408
0400492
SAFETY CHAIN ASSEMBLY
SAFETY CHAIN - SYSTEM 10
SCREW, 1/2"-13 X 1-3/4" HEX HD CAP
NUT, 1/2"-13 HEX NYLOK
WASHER, 1/2" FLAT
DESCRIPTION
VI-3
REF.
NO.
NO.
REQ'D
PART
NUMBER
-28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
-1
1
1
1
1
1
1
4
6
1
2
1
4
2
7
1
1
5
1
1
1
1
1
1
2
1
1
1
1
1
0903793
0300341
0302230
0302231
0302641
0303229
0400070
0400095
0400118
0400148
0400150
0400365
0400367
0400382
0400388
0400392
0400393
0400463
0400480
0400492
0705698
0709331
0709380
0709655
0711970
0712230
0712741
0715717
0802859
0803056
HD0900
HOUSE LOCK KIT (NOT SHOWN)
KNOB, BLACK
ADJUSTABLE CLEVIS, AC-210
ADJUSTABLE CLEVIS, AC-218
SPRING, PLUNGER PIN
CONTROL CABLE, 90"
SCREW, 1/4"-20 X 1" HEX HD CAP
SCREW, 5/16"-18 X 1/2" SHOULDER
SCREW, 5/16"-18 X 3/4" HEX HD CAP
SCREW, 3/8"-16 X 1-1/4" HEX HD CAP
SCREW, 3/8"-16 X 2-1/2" HEX HD CAP
NUT, 1/4"-28 HEX
NUT, 1/4"-20 HEX NYLOK
NUT, 5/16"-18 HEX NYLOK
NUT, 3/8"-24 HEX NYLOK
NUT, 3/8"-16 HEX NYLOK
NUT, 3/8"-16 HEX JAM
WASHER, 5/16" FLAT
WASHER, 3/8" FLAT
WASHER, 1/2" FLAT
CONNECTOR, ALLTHREAD
RETAINING PIN, HOUSE LOCK
BELL CRANK, HOUSE LOCK
PLATE, CONTROL CABLE MOUNTING
BRACKET, HOUSE LOCK CONTROL
BOSS, TURNTABLE LOCK
COVER PLATE, HOUSE LOCK
SPRING, SPACER
CONTROL HANDLE, WELDMENT
COVER, HOUSE LOCK WELDMENT
BEARING, ROD END 1/4"-28
-58
59
-2
4
0904049
0303481
0400223
BOOM/TAILGATE BUMPER KIT
SLIDE PAD, BUMPER
SCREW, 3/8"-16 X 3/4" FL HD SKT
DESCRIPTION
Section VI - PARTS (cont'd)
BODY ASSEMBLY
VI-4
Section VI - PARTS (cont'd)
BODY ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
35 FT.
2
1
1
6
8
76
6
8
76
6
108
1
1
2
6
1
1
1
1
1
2
0300345
0301223
0303728
0303729
0400066
0400122
0400303
0400369
0400392
0400436
0400451
0400566
0705090
0705091
0705092
0706609
0712761
0712155
0712156
0712157
0712159
0801175
FENDER, RUBBER
MUDFLAP
TOOL COMPARTMENT, LEFT 180" C.B.
TOOL COMPARTMENT, RIGHT 180" C.B.
SCREW, 1/4"-20 X 3/4" HEX HD CAP
SCREW, 3/8"-16 X 1-1/4" HEX HD CAP
SCREW, 7/8"-9 X 2-1/2" HEX HD CAP
CLIP, 1/4" "J" TINNERMAN
NUT, 3/8"-16 HEX NYLOK
NUT, 7/8"-9 HEX NYLOK
WASHER, 1/4" FLAT
RIVET, 1/4"
ANGLE, MUDFLAP MOUNTING LEFT
ANGLE, MUDFLAP MOUNTING RIGHT
BAR, MUDFLAP
RETAINING STRIP, RUBBER FENDER
PANEL, CONTROL
PANEL, CONTROL, 12 SLOT
PANEL, GAUGE
PANEL, WINCH FREE SPOOL
PANEL, CONTROL
FORK STORAGE BRACKET
-24
25
-6
2
0901496
0400035
0500406
CENTURY NAMEPLATE KIT
SCREW, #10-24 X 1/2" OVAL HD SELF TAP
CENTURY NAMEPLATE
-26
27
28
-2
4
4
0902113
0300097
0400101
0400382
BOARDING STEP KIT
FOLDING STEP
SCREW, 5/16"-18 X 1" RD HD SLOTTED
NUT, 5/16"-18 HEX NYLOK
-29
30
31
-1
2
2
0903069
0303061
0400057
0400367
BACKUP ALARM KIT (NOT SHOWN)
BACK UP ALARM
SCREW, 1/4"-20 X 1-1/4" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
-32
33
-16
16
0903999
0301934
0400016
DOOR BUMPER KIT (NOT SHOWN)
DOOR STOP
SCREW, #8-32 X 1" FL PHL HD MACH
DESCRIPTION
VI-5
Section VI - PARTS (cont'd)
SDU/2 ASSEMBLY
VI-6
Section VI - PARTS (cont'd)
SDU/2 ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
4
15
4
1
2
1
3
3
1
1
1
2
2
1
2
8
2
6
4
1
4
2
8
8
2
1
8
8
6
2
1
2
1
1
1
0300110
0300113
0300329
0301197
0301397
0301398
0301817
0301818
0301822
0302537
0303088
0303097
0303098
0303501
0303902
0400044
0400139
0400151
0400196
0400219
0400228
0400271
0400288
0400306
0400392
0400408
0400430
0400437
0400481
0400508
0703233
0703277
0707179
0708470
0709242
DESCRIPTION
SNAP RING, 1"
GREASE FITTING
SNAP RING, 2" EXTERNAL
COMPRESSION SPRING
GREASE FITTING, 90°
STEEL BALL,1-3/16"
SLIDE PAD
SLIDE PAD
O-RING, PIVOT PIN
FOLD CYLINDER
BUSHING, PIVOT PIN
THRUST WASHER, 1/8"
THRUST WASHER, 1/16"
EXTEND CYLINDER
TILT CYLINDER
DRIVE SCREW, #10 X 1/2" RD HD
SCREW, 3/8"-16 X 1-1/2" HEX SKT SET
SCREW, 3/8"-24 X 3/4" HEX HD CAP
SCREW, 1/2"-13 X 1-1/4" SKT HD CAP
SCREW, 1/2"-13 X 4-1/2" HEX HD CAP
SCREW, 3/8"-24 X 5/8" BUTTON HD SKT
SCREW, 5/8"-11 X 4-1/2" SKT HD CAP
SCREW, 3/4"-10 X 2-1/2" HEX HD CAP GR8
SCREW, 7/8"-9 X 3" HEX HD CAP GR8
NUT, 3/8"-16 NYLOK HEX
NUT, 1/2"-13 NYLOK HEX
NUT, 3/4"-10 NYLOK HEX
NUT, 7/8"-9 NYLOK HEX
LOCKWASHER, 3/8" EXTERNAL TOOTH
LOCKWASHER, 5/8" HELICAL
STOP PLATE
SLIDER PAD
PIN
SPACER, DETENT BALL
PIN, MAIN PIVOT
VI-7
REF.
NO.
NO.
REQ'D
PART
NUMBER
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
0710051
0710052
0710450
0712174
0712195
0712213
0714209
0714218
0714219
0714240
0802914
0803441
0803442
0804029
0804030
0804032
0804034
0804035
0804036
HC0159
HD0152
UK0126
-58
59
60
61
62
63
64
65
66
67
-2
4
2
1
4
4
2
8
4
2
0904785
0400082
0400191
0400366
0400367
0400413
0703484
0703487
0703488
0714388
AWS-1011-A
DESCRIPTION
PIVOT PIN, TOP HALF
PIVOT PIN, BOTTOM HALF
RETRACT BAR
SHAFT, EXTEND CYLINDER INNER BOOM
SHAFT, EXTEND CYLINDER OUTER BOOM
STOP PLATE
PIVOT PIN
PIN, TILT CYLINDER ROD END
PIN, LIFT CYLINDER ROD END
PIN, FOLD CYLINDER
CROSSBAR WELDMENT
2ND STAGE BOOM WELDMENT
INNER BOOM WELDMENT
OUTER BOOM WELDMENT
OUTER MAST WELDMENT
INNER MAST WELDMENT
TILT CYLINDER MOUNTING BRACKET
LEFT PIVOT SUPPORT WELDMENT
RIGHT PIVOT SUPPORT WELDMENT
LIFT CYLINDER
SNAP RING, 3" EXTERNAL
PIN, TILT CYLINDER BASE END
HOSE TENSION KIT (NOT SHOWN)
EYEBOLT, 1/4"-20 X 1-1/8"
SCREW, 1/2"-13 X 3-3/4" HEX HD CAP
NUT, 1/4"-20 HEX
NUT, 1/4"-20 NYLOK HEX
NUT, 1/2"-20 NYLOK HEX
PULLEY, HOSE TENSIONER
BRACKET, HOSE TENSIONER PULLEY
WASHER, HOSE TENSIONER PULLEY
ANGLE, NYLON SHEAVE
CLAW SPRING
Section VI - PARTS (cont'd)
SDU/2 LIFT & EXTEND HYDRAULICS
VI-8
Section VI - PARTS (cont'd)
SDU/2 LIFT & EXTEND HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
2
1
2
2
2
1
1
2
2
2
2
2
REF.
2
2
1
1
1
2
2
2
1
1
0300044
0300644
0301425
0301470
0301620
0301731
0301782
0301998
0302065
0302510
0302575
0303017
0303093
0303170
0303187
0303501
0303967
0303968
0400078
0400367
0400451
0703001
HC0159
DESCRIPTION
CONNECTOR, 6MJ-8MB
HOSE CLAMP, 8"
CONNECTOR, 6MJ-6MP
ELBOW, 6MJ-8MB90
ELBOW, 6MJ-6MB90
HOLDING VALVE
MALE RUN TEE, 6MJ-4MP-6MJ
HOSE ASSEMBLY, 24"
CAP, 6MJ
ADAPTER, 6MJ-6MBL
BULKHEAD RUN TEE, 6MJ
CONNECTOR, 8MB-6FB
CONTROL VALVE, VDP11DDDC110
HOSE ASSEMBLY, 75"
HOSE ASSEMBLY, 141"
EXTEND CYLINDER
HOSE ASSEMBLY, 7"
HOSE ASSEMBLY, 10"
SCREW, 1/4"-20 X 2" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
WASHER, 1/4" FLAT
BRACKET, CHECK VALVE MOUNTING
LIFT CYLINDER
VI-9
Section VI - PARTS (cont'd)
SDU/2 TILT & FOLD HYDRAULICS
VI-10
Section VI - PARTS (cont'd)
SDU/2 TILT & FOLD HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
2
1
3
2
2
2
1
1
1
2
2
1
2
5
2
2
2
REF.
2
1
6
6
2
2
0300044
0300365
0301388
0301425
0301619
0301620
0301730
0301731
0301782
0301837
0301997
0301998
0302510
0302808
0302813
0302886
0303017
0303093
0303902
0306508
0400078
0400367
0400451
0703001
DESCRIPTION
CONNECTOR, 6MJ-8MB
CLAMP, CHECK VALVE RETAINING, 7"
ELBOW, 8MJ-8MB90
CONNECTOR, 6MJ-6MP
BRANCH TEE, 6MJ-6MJ-6MB
ELBOW, 6MJ-6MB90
DOUBLE HOLDING VALVE
HOLDING VALVE
MALE RUN TEE, 6MJ-4MP-6MJ
INLINE ORIFICE
HOSE ASSEMBLY, 18"
HOSE ASSEMBLY, 24"
ADAPTER, 6MJ-6MBL
HOSE ASSEMBLY, 18"
HOSE ASSEMBLY, 108"
HOSE ASSEMBLY, 45"
CONNECTOR, 8MB-6FB
CONTROL VALVE, VDP11DDDC110
TILT CYLINDER
FOLD CYLINDER
SCREW, 1/4"-20 X 2" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
WASHER, 1/4" FLAT
BRACKET, CHECK VALVE MOUNTING
VI-11
Section VI - PARTS (cont'd)
SDU/2 LIFT ADAPTERS
.
KING PIN & FIFTH WHEEL ADAPTERS
VI-12
Section VI - PARTS (cont'd)
SDU LIFT ADAPTERS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
2
2
2
2
2
2
2
4
2
2
1
1
2
1
1
2
2
2
0200018
0200019
0200020
0200021
0200022
0200023
0200024
0306564
0400585
0711002
0801186
0801187
0801459
0803591
0803592
0802810
0900900
0902321
DESCRIPTION
FORK, SHORT 3" OPENING
FORK, SHORT 4-1/2" OPENING
FORK, MEDIUM 3" OPENING
FORK, MEDIUM 4-1/2" OPENING
FORK, LONG 3" OPENING
FORK, LONG 4-1/2" OPENING
FORK, OFFSET REAR AXLE 6" OPENING
TEE HANDLE, ALUMINUM 5/8" X 1-1/4"
HAIR PIN COTTER, 1-1/4"
BOLT, MODIFIED 5/8"-11 X 6" w/HOLE
CHAIN HOOK ADAPTER, RT
CHAIN HOOK ADAPTER, LT
RISER BRACKET
OFFSET FORK ADAPTER, LT
OFFSET FORK ADAPTER, RT
SPRING LIFT BRACKET
RETAINING PIN ASSEMBLY
RETAINER PIN, SPRING LIFT BRACKET
KING PIN & FIFTH WHEEL ADAPTERS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
1
0803605
KING PIN ADAPTER WELDMENT
-2
3
4
5
6
-1
2
1
1
1
0902782
0400555
HD1259
VA0660
VA0661
VA0662
FIFTH WHEEL ADAPTER (COMPLETE)
ROLL PIN, 3/8" X 1-1/2"
PIN, SNAPPER
5TH WHEEL PIVOT PLATE WELDMENT
PULL PIN WELDMENT
PIVOT PIN WELDMENT
-7
8
9
10
-1
4
4
1
124002211
0302198
0400176
0400491
0803604
11
2
0902378
DESCRIPTION
PINTLE HOOK KIT (COMPLETE)
PINTLE HOOK (Not Shown)
SCREW, 1/2"-13 X 1" HEX HD CAP
LOCKWASHER, 1/2" HELICAL
5TH WHEEL, KING PIN ADAPTER & PINTLE
HOOK BRACKET
RETAINING PIN ASSEMBLY
VI-13
Section VI - PARTS (cont'd)
RECOVERY BOOM ASSEMBLY
VI-14
Section VI - PARTS (cont'd)
RECOVERY BOOM ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
6
2
2
6
2
1
2
2
1
1
2
2
4
2
2
8
2
8
2
2
1
4
16
1
35
36
4
3
16
20
0300113
0301691
0301923
0301924
0301989
0302060
0302061
0302273
0302830
0303026
0303092
0303504
0305023
0305031
0400122
0400126
0400130
0400141
0400172
0400205
0400206
0400248
0400298
0400318
0400336
0400338
0400392
0400408
0400430
0400482
DESCRIPTION
GREASE FITTING
MASTER LINK, OBLONG
SLIDE PAD, BOOM BOTTOM
SLIDE PAD, BOOM SIDE
WIRE ROPE, 6 X 25 IWRC, 3/4" X 250 FT.
ANCHOR SHACKLE, 1-1/2"
SAFETY CHAIN, 5/8" ALLOY
SPRING, WINCH CABLE TIE-BACK
BOOM EXTEND CYLINDER
SLEW RING
BOOM LIFT CYLINDER
WINCH, DP S50-50K (Not Shown)
SNAP RING
SLIDE PAD, INNER BOOM
SCREW, 3/8"-16 X 1-1/4" HEX HD CAP
SCREW, 3/8"-16 X 1" HEX HD CAP
SCREW, 3/8"-16 X 3-1/2" HEX HD CAP
SCREW, 3/8"-16 X 7/8" HEX HD CAP
SCREW, 3/8"-16 X 4-1/2" HEX HD CAP
SCREW, 1/2"-13 X 3" HEX HD CAP
SCREW, 1/2"-13 X 5" HEX HD CAP
SCREW, 5/8"-11 X 1" HEX HD CAP
SCREW, 3/4"-10 X 5" HEX HD CAP
SCREW, 1"-8 X 3" SKT HD CAP
SCREW, 1"-8 X 3" HEX HD CAP
SCREW, 1"-8 X 6-1/2" HEX HD CAP
NUT, 3/8"-16 HEX NYLOK
NUT, 1/2"-13 HEX NYLOK
NUT, 3/4"-10 NYLOK HEX
LOCKWASHER, 3/8" HELICAL
VI-15
REF.
NO.
NO.
REQ'D
PART
NUMBER
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
4
36
36
6
2
6
2
1
1
1
1
4
1
1
1
1
1
4
1
2
1
1
1
1
4
0400508
0400522
0400523
0400557
0700778
0703734
0703736
0703737
0703738
0703739
0703740
0705902
0705907
0706042
0706043
0710638
0710643
0711998
0801085
0803721
0804025
0804308
0903776
0903777
MM12B
LOCKWASHER, 5/8" HELICAL
WASHER, 1-1/16 X 2 X 1/8" HARDENED
WASHER, 1-1/16 X 2-1/2 X 1/8" HARDENED
ROLL PIN, 1/2" X 1-1/4"
TOP SPACER, OUTER BOOM
SHIM, SIDE PLATE, OUTER BOOM
SHAFT, CYLINDER PIVOT
SHAFT, LIFT CYLINDER PIVOT
SHAFT, BOOM PIVOT
SHAFT, EXTEND CYLINDER, ROD END
SHAFT, EXTEND CYLINDER, BASE END
ROLL PIN, 3/8" X 1-3/4"
PLATE, ACCESS COVER
CABLE WING, LONG
CABLE WING, MEDIUM
"D" RING PIN, INNER BOOM
"D" RING PIN, OUTER BOOM
ANGLE, WINCH MOUNTING (Not Shown)
OUTER BOOM WELDMENT
LOCK WELDMENT
INNER BOOM WELDMENT
RECOVERY FRAME WELDMENT, 1060S
BOOM SWIVEL ASSEMBLY, LEFT
BOOM SWIVEL ASSEMBLY, RIGHT
RING, TOWING
-56
57
-1
4
0904612
0303887
0400045
BOOM ANGLE KIT (Not Shown)
INCLINOMETER KIT
SCREW, #10-32 X 1/2" THRD CUT RD HD
DESCRIPTION
Section VI - PARTS (cont'd)
BOOM HYDRAULICS
VI-16
Section VI - PARTS (cont'd)
BOOM HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
2
6
1
2
2
2
1
1
1
2
4
2
5
1
2
2
2
1
2
5
2
5
2
1
1
1
1
1
1
1
1
1
0300040
0300113
0300644
0300659
0300761
0300762
0300763
0300766
0300767
0300901
0301388
0301471
0301487
0301906
0301983
0302321
0302631
0302830
0303092
0400066
0400107
0400367
0400382
0701680
0709708
0709709
0709710
0709711
0709712
0709713
0802883
HC1413
DESCRIPTION
CONNECTOR, 8MJ-8MP
GREASE FITTING
HOSE CLAMP, 8"
HOSE ASSEMBLY, 45"
STRAIGHT ADAPTER
MALE CONNECTOR
MALE ELBOW
MALE BRANCH TEE
TEE UNION
ELBOW
ELL, 8MJ-8MB90
HOSE ASSEMBLY, 30"
HOSE CLAMP, 1/2" INSULATED
HOLDING VALVE, ACTIVATION
ELBOW, 10MJ-8MB45
ELBOW, 8MJ-8MB45
HOSE ASSEMBLY, 68"
CYLINDER, EXTEND
CYLINDER, BOOM LIFT
SCREW, 1/4"-20 X 3/4" HEX HD CAP
SCREW, 5/16"-18 X 2-1/2" HEX HD CAP
NUT, 1/4"-20 NYLOK HEX
NUT, 5/16"-18 NYLOK HEX
CLAMP BRACKET, HYD TUBE
TUBE, LIFT CYLINDER HYDRAULIC
TUBE, LIFT CYLINDER HYDRAULIC
TUBE, LIFT CYLINDER HYDRAULIC
TUBE, LIFT CYLINDER HYDRAULIC
TUBE, LIFT CYLINDER HYDRAULIC
TUBE, HYD PIPE, ELEV CYLINDER
BRACKET, HOLDING VALVE
TEE FITTING
VI-17
Section VI - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
Section VI - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
VI-18
Section VI - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
2
2
2
6
1
1
1
4
1
1
15 FT.
1
1
15 FT.
2
1
1
2
1
1
1
1
1
1
1
2
1
1
2
1
2
2
2
0300052
0300055
0300056
0300071
0300136
0300212
0300288
0300364
0300434
0300446
0300558
0300660
0300666
0300671
0300692
0301373
0301541
0301545
0301547
0301695
0301762
0301763
0301792
0301836
0301880
0301894
0301904
0301905
0301961
0301965
0302010
0302108
0302169
DESCRIPTION
ELBOW, 8MJ-10MB90
HOSE BARB, 12C4-12MP
BARB, 16C4-16MP
CLAMP, HOSE, 1"
RETURN LINE FILTER ASSEMBLY
HOSE ASSEMBLY, 115"
STREET ELBOW, 90°, 3/4"
CLAMP, HOSE, 1" - 2-1/4"
HOSE BARB, 2"
PIPE PLUG, 3/4" NPT MALE
SUCTION HOSE, 2"
HOSE ASSEMBLY, 120"
BARB, 24C4-24MP
SUCTION HOSE, 1-1/2"
STREET ELBOW, 90°, 1"
PIPE BUSHING, 2" NPT-1-1/2" NPT
SIGHT GAGE, TYPE S-1
ELBOW, 12MJ-12MB90
ELBOW, 8MJ-12MB90
HOSE ASSEMBLY, 91"
CONTROL VALVE, VDP12DDDDDD10
H.P.C.O. ADAPTER
ELBOW, 16MB-12FR90
HYDRAULIC PUMP, OPPOSITE ENGINE
HOSE ASSEMBLY, 107"
SPIN-ON FILTER ASSEMBLY
ELBOW, 8MJ-12FL90
"O" RING FLANGE KIT, 12FH
BALL VALVE, BRONZE
HOSE ASSEMBLY, 106"
STREET ELL, 2" 45 DEG.
REDUCER BUSHING, 20MP-16FP
"O"-RING CONNECTOR, 16MJ-12MB
VI-19
REF.
NO.
NO.
REQ'D
PART
NUMBER
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
2
3
4
4
1
1
1
1
2
3
2
2
4
1
2
1
12
1
6
12
6
3
2
4
6
13
12
4
6
1
1
1
1
0302170
0302205
0302227
0302228
0302242
0302277
0302296
0302334
0302367
0302577
0302826
0302829
0302901
0302931
0302932
0303093
0303290
0305006
0400036
0400122
0400135
0400140
0400150
0400177
0400357
0400392
0400482
0400491
0704045
0705910
0706114
0802787
0802799
DESCRIPTION
BENT TUBE, SWIVEL 16C2-16FJX90
GAUGE, FLUSH MOUNT, 6000 PSI
CENTER BONDED MOUNT (Not Shown)
SPECIAL WASHER (Not Shown)
FLANGE FITTING, 24FL-24HOSE90
HOSE ASSEMBLY, 106"
CONTROL VALVE, VDP12CDD118
CONTROL VALVE, VDP12CDCD10
PIPE NIPPLE, 2" X 4"
CONNECTOR, 6MJ-4FP
TEE, 12MJ-12FJX-12MJ
ADAPTER, 12FJ-6MJ
HOSE ASSEMBLY, 120"
ELBOW, FLANGE 24-32FL90 W/ FLANGE KIT
ELBOW, 12MJ-20FL90 W/ FLANGE KIT
CONTROL VALVE
CLAMP, 2-1/2" INSULATED (Not Shown)
FILLER CAP
SCREW, #10-32 X 1" RD HD MACH
SCREW, 3/8"-16 X 1-1/4" HEX HD CAP (N.S.)
SCREW, 3/8"-16 X 4-1/2" HEX HD CAP (N.S.)
SCREW, 3/8"-16 X 4" HEX HD CAP (N.S.)
SCREW, 3/8"-16 X 2-1/2" HEX HD CAP (N.S.)
SCREW, 1/2"-13 X 1-1/4" HEX HD CAP
NUT, #10-32 NYLOK HEX
NUT, 3/8"-16 NYLOK HEX
LOCKWASHER, 3/8" HELICAL
LOCKWASHER, 1/2" HELICAL
SPACER, CONTROL VALVE
COVER PLATE
GASKET, CLEANOUT & FILLER COVER
SDU VALVE BRACKET WELDMENT
RESERVOIR WELDMENT
Section VI - PARTS (cont'd)
FRAME HYDRAULICS
VI-20
Section VI - PARTS (cont'd)
FRAME HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
3
3
3
4
4
REF.
2
REF.
1
2
2
3
1
4
0300787
0301370
0301376
0301445
0301471
0301999
0302296
0302304
0302334
0302634
0302827
0302828
0303176
0303182
0303183
HOSE ASSEMBLY, 53"
HOSE ASSEMBLY, 65"
CONNECTOR, 8MJ-10MB
EXTENDED CONNECTOR, 8MJ-8MBL
HOSE ASSEMBLY, 30"
HOSE ASSEMBLY, 9"
CONTROL VALVE, VDP12CDD118
HOSE ASSEMBLY, 42"
CONTROL VALVE, VDP12CDCD10
HOSE ASSEMBLY, 20"
CONNECTOR, 10MJ-10MB
CONNECTOR, 10MJ-10MBL
CONNECTOR, 10MB-8FB
HOSE ASSEMBLY, 41"
HOSE ASSEMBLY, 50"
-16
17
18
19
-4
1
2
2
0901477
0301388
0302472
0400130
0400482
DOUBLE HOLDING VAVLE ASSEMBLY
ELBOW, 8MJ-8MB90
DOUBLE HOLDING VALVE
SCREW, 3/8"-16 X 3-1/2" HEX HD CAP
LOCKWASHER, 3/8" HELICAL
-20
21
-4
2
0901480
0301425
0303489
RESTRICTOR VALVE ASSEMBLY
CONNECTOR, 6MJ-6MP
RESTRICTOR VALVE
-22
23
24
25
26
27
-3
2
2
1
2
2
0903196
0300142
0301868
0302053
0302226
0400090
0400452
SHUTTLE VALVE ASSEMBLY
ELBOW, 6MJ-4MP90
MALE RUN TEE, 4FP-4FP-4MP
REDUCER, 8MJ-4MP
SHUTTLE VALVE
SCREW, 1/4"-20 X 1-3/4" RD HD
LOCKWASHER, 1/4" HELICAL
DESCRIPTION
VI-21
REF.
NO.
NO.
REQ'D
PART
NUMBER
--
--
0903030
28
29
30
31
32
33
34
35
36
37
38
39
2
1
1
1
1
4
2
16
6
16
1
1
0301376
0303030
0303031
0303045
0303817
0400177
0400192
0400254
0400491
0400508
0709366
IC209
PLANETARY GEAR REDUCER
& HYDRAULIC MOTOR ASSEMBLY
CONNECTOR, 8MJ-10MB
PLANETARY GEAR BOX
PINION GEAR (Not Shown)
GEARBOX BRAKE (Not Shown)
HYDRAULIC MOTOR
SCREW, 1/2"-13 X 1-1/4" HEX HD CAP
SCREW, 1/2"-20 X 1-3/4" SKT HD CAP (N.S.)
SCREW, 5/8"-11 X 2-1/2" HEX HD CAP
LOCKWASHER, 1/2" HELICAL
LOCKWASHER, 5/8" HELICAL
PINION RETAINER (Not Shown)
ADAPTER, 6MJ-4MB90
-40
41
42
43
44
45
46
-5
7
2
4
2
2
2
0903031
0300041
0301388
0301470
0302031
0303028
0400272
0400421
ROTARY SWIVEL ASSEMBLY
CONNECTOR, 8MJ-8MB
ELL, 8MJ-8MB90
ELBOW, 6MJ-8MB90
PLUG, 8MB HEX SKT
HYDRAULIC SWIVEL
SCREW, 5/8"-11 X 2-3/4" HEX HD CAP
NUT, 5/8"-11 NYLOK HEX
-47
48
49
50
-4
1
2
2
0903344
0301388
0303194
0400107
0400382
CROSSOVER RELIEF VALVE ASSEMBLY
ELBOW, 8MJ-8MB90
CROSSOVER RELIEF VALVE
SCREW, 5/18"-18 X 2-1/2" HEX HD CAP (N.S.)
NUT, 5-16"-18 NYLOK HEX (Not Shown)
DESCRIPTION
Section VI - PARTS (cont'd)
WINCH HYDRAULICS & AIR FREE SPOOL
VI-22
Section VI - PARTS (cont'd)
WINCH HYDRAULICS & AIR FREE SPOOL
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
4
2
2
2
15 FT.
2
4
2
2
15 FT.
5
1
2
4
REF.
4
4
2
4
4
0300041
0300324
0301388
0301574
0301577
0301610
0302320
0302321
0302335
0302431
0302434
0302607
0302677
0302678
0303028
0303079
0303189
0303504
0400021
0400351
DESCRIPTION
CONNECTOR, 8MJ-8MB
SOLENOID VAVLE, AIR CONTROL
ELBOW, 8MJ-8MB90
ELBOW, 4TB-4MP90
AIR HOSE, 1/4" O.D.
ELBOW, 4TB-4MP
REDUCER, 8MB-4FP
ELBOW, 8MJ-8MB45
CONNECTOR, 4TB-2MP
CONVOLUTED LOOM, 3/8"
CABLE TIE, 4"
TEE UNION, 4TB-4TB-4TB
BREATHER VENT, 2MP
ELBOW, 4TB-2MP90
HYDRAULIC SWIVEL
CONNECTOR, 10MJ-8MB
HOSE ASSEMBLY, 105"
WINCH, DPS50-50K
SCREW, #8-32 X 1/2" RD HD PHIL MACH
NUT, #8-32 HEX & STAR WASHER
VI-23
Section VI - PARTS (cont'd)
LEFT CONTROL ASSEMBLY
VI-24
Section VI - PARTS (cont'd)
LEFT CONTROL ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
2
1
2
1
2
1
2
3
3
1
12
12
1
1
1
1
2
12
4
4
2
4
13
12
4
12
4
12
12
12
1
2
1
1
1
1
12
1
0300834
0300835
0300836
0300837
0301884
0301969
0302437
0302449
0302455
0302457
0302726
0303008
0303379
0303380
0303381
0303382
0400066
0400103
0400107
0400122
0400367
0400379
0400382
0400383
0400392
0400393
0400451
0400512
0400532
0400541
0500225
0711235
0711245
0711285
0711984
0712006
0803294
0803404
DESCRIPTION
CONTROL KNOB, IN-OUT
CONTROL KNOB, BOOM UP-DOWN
CONTROL KNOB, JACK UP-DOWN
CONTROL KNOB, BOOM IN-OUT
CONTROL CABLE, 96"
CONTROL CABLE, 84"
CONTROL CABLE, 168"
CONTROL CABLE, 148"
CONTROL CABLE, 79"
CONTROL CABLE, 104"
GREASE FITTING, 1/4"-28 X 45°
ADJUSTABLE CLEVIS
CONTROL KNOB, SWING CW-CCW
CONTROL KNOB, UNDERLIFT IN-OUT
CONTROL KNOB, UNDERLIFT UP-DOWN
CONTROL KNOB, FOLD UP-DOWN
SCREW, 1/4"-20 X 3/4" HEX HD CAP
SCREW, 5/16"-18 X 1-1/4" HEX HD CAP
SCREW, 5/16"-18 X 2-1/2" HEX HD CAP
SCREW, 3/8"-16 X 1-1/4" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
NUT, 5/16"-18 "J" TINNER
MANNUT, 5/16"-18 HEX NYLOK
NUT, 5/16"-24 HEX NYLOK
NUT, 3/8"-16 HEX NYLOK
NUT, 3/8"-16 HEX JAM
WASHER, 1/4" FLAT
WASHER, 3/4" FLAT (SPECIAL)
CLEVIS PIN, 5/16" X 1"
COTTER PIN, 1/16" X 3/4"
DECAL, AIR FREE SPOOL (NOT)
CLAMP, SHAFT CONTROL BOX
PLATE, SHAFT SUPPORT
SUPPORT, CONTROL (RIGHT)
PIN, CONTROL BOX
SUPPORT, CONTROL (LEFT)
CONTROL HANDLE WELDMENT
CONTROL FRAME WELDMENT
VI-25
SDU REMOTE CONTROL ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
-39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
-10
1
15 FT.
2
2
2
2
1
35
1
12
1
1
1
8 FT.
1
1
1
1
1
3
2
3
2
2
5
3
2
3
1
3
1
0903804
0300166
0301574
0301577
0301610
0301618
0302048
0302340
0302431
0302434
0302677
0302678
0302844
0303226
0303235
0303322
0303363
0303364
0303365
0303735
0303781
0306698
0400025
0400057
0400078
0400351
0400367
0400401
0400451
0400527
0711277
0803181
HA0132
SDU REMOTE CONTROL ASSEMBLY
WIRE CONNECTOR, SPADE
ELBOW, 4TB-4MP90
AIR HOSE, 1/4" O.D.
CONNECTOR, 4TB-4MP
BRASS PLUG, 4MP
CABLE SEALING GRIP
HEX PIPE BUSHING
CONVOLUTED LOOM, 3/8" X 8"
CABLE TIE, 4" 18 LB.
BREATHER VENT, 2MP
ELBOW, 4TB-2MP
AIR SOLENOID VALVE (6)
CIRCUIT BREAKER, HI-AMP WATERPROOF
TERMINAL BLOCK
ELECTRICAL CABLE, 16/10 SO
AIR FILTER/REGULATOR
AIR LUBRICATOR
MOUNTING BRACKET
BREATHER VENT
POWER PAL, 8 POSITION
AIR CYLINDER
SCREW, #8-32 X 3/4" RD HD SLOTTED
SCREW, 1/4"-20 X 1-1/4" HEX HD CAP
SCREW, 1/4"-20 X 2" HEX HD CAP
HEX NUT & STAR WASHER, #8-32
NUT, 1/4"-20 HEX NYLOK
NUT, 7/16"-20 HEX JAM
WASHER, 1/4" FLAT
CLEVIS PIN, 5/16" X 5/8" COTTERLESS
SUPPORT, SOLENOID VALVE
CLEVIS WELDMENT
GAUGE, 0-160 PSI
-71
72
73
74
75
76
-3
11
35
11
32
8
0903836
0303008
0400112
0400383
0400384
0400466
0801054
LEFT & RIGHT CONTROL LINK KIT
ADJUSTABLE CLEVIS
SCREW, 5/16"-24 X 1-1/4" HEX HD CAP
NUT, 5/16"-24 HEX
NUT, 5/16"-24 HEX NYLOK
LOCKWASHER, 5/16" INT. TOOTH
CONTROL CABLE CONNECTOR
DESCRIPTION
Section VI - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY
VI-26
Section VI - PARTS (cont'd)
RIGHT CONTROL ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
2
1
2
1
3
1
2
1
9
9
1
1
1
2
2
9
4
4
2
4
4
9
4
9
4
9
9
9
9
1
2
1
1
1
1
1
9
0300834
0300835
0300836
0300837
0301884
0301969
0302437
0302457
0302726
0303008
0303379
0303380
0303381
0303427
0400066
0400103
0400107
0400122
0400367
0400379
0400382
0400383
0400392
0400393
0400451
0400466
0400512
0400532
0400541
0500225
0711235
0711245
0711246
0711284
0711285
0803182
0803294
DESCRIPTION
CONTROL KNOB, IN-OUT
CONTROL KNOB, BOOM UP-DOWN
CONTROL KNOB, JACK UP-DOWN
CONTROL KNOB, BOOM IN-OUT
CONTROL CABLE, 96"
CONTROL CABLE, 84"
CONTROL CABLE, 168"
CONTROL CABLE, 104"
GREASE FITTING, 1/4"-28 X 45°
ADJUSTABLE CLEVIS
CONTROL KNOB, SWING CW-CCW
CONTROL KNOB, UNDERLIFT IN-OUT
CONTROL KNOB, UNDERLIFT UP-DOWN
CONTROL CABLE, 114"
SCREW, 1/4"-20 X 3/4" HEX HD CAP
SCREW, 5/16"-18 X 1-1/4" HEX HD CAP
SCREW, 5/16"-18 X 2-1/2" HEX HD CAP
SCREW, 3/8"-16 X 1-1/4" HEX HD CAP
NUT, 1/4"-20 HEX NYLOK
NUT, 5/16"-18 "J" TINNERMAN
NUT, 5/16"-18 HEX NYLOK
NUT, 5/16"-24 HEX
NUT, 3/8"-16 HEX NYLOK
NUT, 3/8"-16 HEX JAM
WASHER, 1/4" FLAT
LOCKWASHER, 5/16" INTERNAL TOOTH
WASHER, 3/4" FLAT (SPECIAL)
CLEVIS PIN, 5/16" X 1"
COTTER PIN, 1/16" X 3/4"
DECAL, AIR FREE SPOOL (NOT)
CLAMP, SHAFT CONTROL BOX
PLATE, SHAFT SUPPORT
PIN, CONTROL BOX
SUPPORT, CONTROL (LEFT)
SUPPORT, CONTROL (RIGHT)
CONTROL FRAME WELDMENT
CONTROL HANDLE WELDMENT
VI-27
Section VI - PARTS (cont'd)
CONTROL ASSEMBLY (2 REQ'D)
VI-28
Section VI - PARTS (cont'd)
CONTROL ASSEMBLY (2 REQ'D)
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
2
2
2
2
4
2
4
4
4
6
2
4
2
6
4
2
2
2
1
1
1
1
2
2
1
0300341
0302449
0302726
0303008
0400107
0400112
0400122
0400379
0400382
0400383
0400384
0400392
0400393
0400466
0400512
0400532
0400541
0711235
0711284
0711285
0711574
0712005
0801054
0803294
0803407
DESCRIPTION
CONTROL KNOB
CONTROL CABLE, 148"
GREASE FITTING, 1/4"-28 X 45°
ADJUSTABLE CLEVIS
SCREW, 5/16"-18 X 2-1/2" HEX HD CAP
SCREW, 5/16"-24 X 1-1/4" HEX HD CAP
SCREW, 3/8"-16 X 1-1/4" HEX HD CAP
NUT, 5/16"-18 "J" TINNERMAN
NUT, 5/16"-18 HEX NYLOK
NUT, 5/16"-24 HEX
NUT, 5/16"-24 HEX NYLOK
NUT, 3/8"-16 HEX NYLOK
NUT, 3/8"-16 HEX JAM
LOCKWASHER, 5/16" INT. TOOTH
WASHER, 3/4" FLAT (SPECIAL)
CLEVIS PIN, 5/16" X 1"
COTTER PIN, 1/16" X 3/4"
CLAMP, SHAFT CONTROL BOX
SUPPORT, CONTROL (LEFT)
SUPPORT, CONTROL (RIGHT)
SPACER TUBE
PIN, CONTROL BOX
CONTROL CABLE CONNECTOR
CONTROL HANDLE WELDMENT
CONTROL FRAME WELDMENT
VI-29
Section VI - PARTS (cont'd)
FRONT OUTRIGGER ASSEMBLY
VI-30
Section VI - PARTS (cont'd)
FRONT OUTRIGGER ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
8
4
4
2
12
8
4
3
8
3
8
2
2
2
2
4
2
2
4
2
REF.
REF.
2
2
0300109
0300113
0300329
0303386
0303490
0400039
0400118
0400140
0400222
0400392
0400393
0705722
0709326
0709327
0709328
0711913
0802779
0802780
BK2003
EA0174
HC0124
HC0164
HE0239
HE0240
DESCRIPTION
SNAP RING, 1-1/2"
GREASE FITTING
SNAP RING, 2" EXTERNAL
OUTRIGGER BEAM WELDMENT
WEAR PAD
SCREW, #10-32 X 3/4" FL HD PHIL SELF TAP
SCREW, 5/16"-18 X 3/4" HEX HD CAP
SCREW, 3/8"-16 X 4" HEX HD CAP
SCREW, 3/8"-16 X 1-1/2" SKT HD SET
NUT, 3/8"-16 NYLOK HEX
NUT, 3/8"-16 HEX JAM
SHAFT, OUTRIGGER ARM TO PAD
PIN, VERTICAL CYLINDER TO BASE
PIN, EXTEND CYLINDER, ROD END
PIN, EXTEND CYLINDER, BASE END
SHIM, WEAR PAD
VERTICAL TUBE WELDMENT
FRONT OUTRIGGER PAD WELDMENT
WEAR PAD
PIN, IN/OUT 2ND STAGE, ROD END
VERTICAL CYLINDER
EXTEND CYLINDER
LIMIT SWITCH, DOOR (NOT SHOWN)
ARM, LIMIT SWITCH (NOT SHOWN)
VI-31
Section VI - PARTS (cont'd)
FRONT OUTRIGGER HYDRAULICS
VI-32
Section VI - PARTS (cont'd)
FRONT OUTRIGGER HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
4
12
2
2
1
8
2
4
6
1
4
4
4
2
1
2
1
1
4
32 FT.
2
2
0300134
0301487
0301522
0301620
0301762
0301778
0302547
0302551
0302569
0302635
0302727
0303054
0303055
0303184
0303185
0303186
0303187
0303188
0303191
0303193
HC0124
HC0164
DESCRIPTION
HOSE CLAMP, INSULATED 1" (NOT SHOWN)
HOSE CLAMP, 1/2"
CONNECTOR, 6MJ-6MB
ELBOW, 6MJ-6MB90
CONTROL VALVE, VDP12DDDDDD10
CONNECTOR, 6MJ-10MB
CLAMPING UNIT (Not Shown)
NUT, SKT HD STACKING (Not Shown)
WIRE TIE, 29-3/4" (Not Shown)
HOSE ASSEMBLY, 131"
CONNECTOR, 6MJ-8MP
TUBE ASSEMBLY
SADDLE CLAMP, 4"
HOSE ASSEMBLY, 73"
HOSE ASSEMBLY, 66"
HOSE ASSEMBLY, 82"
HOSE ASSEMBLY, 141"
HOSE ASSEMBLY, 75"
HOSE ASSEMBLY, 96"
BLACK SKUFF JACKET
VERTICAL CYLINDER
EXTEND CYLINDER
VI-33
Section VI - PARTS (cont'd)
REAR OUTRIGGER ASSEMBLY
VI-34
Section VI - PARTS (cont'd)
REAR OUTRIGGER ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
4
2
REF.
REF.
16
2
4
16
2
2
2
2
2
2
2
4
2
2
1
1
2
2
2
0300110
0300113
0300680
0303486
0400066
0400129
0400392
0400452
0703457
0703458
0711973
0711975
0712154
0712158
0712196
0712197
0801039
0802780
0803377
0803378
0803379
0803475
0903803
DESCRIPTION
SNAP RING, 1"
GREASE FITTING
VERTICAL CYLINDER
HORIZONTAL CYLINDER
SCREW, 1/4"-20 X 3/4" HEX HD CAP
SCREW, 3/8"-16 X 3/4" ALLEN HD SET
NUT, 3/8"-16 NYLOK HEX
LOCKWASHER, 1/4" HELICAL
SHAFT, JACK CYLINDER, UPPER
SHAFT, JACK CYLINDER, LOWER
SHAFT, EXTEND CYLINDER, BASE END
SHAFT, EXTEND CYLINDER, ROD END
COVER, REAR OUTRIGGER, END
COVER, REAR OUTRIGGER
PLATE, WRAPPER TIE
PLATE, WRAPPER SIDE
PIN-ON JACK PAD
OUTRIGGER PAD WELDMENT
OUTRIGGER WELDMENT, LEFT REAR
OUTRIGGER WELDMENT, RIGHT REAR
INNER BOOM, REAR HORIZONTAL
OUTRIGGER PAD, INTERMEDIATE
SHAFT, REAR OUTRIGGER PAD
VI-35
Section VI - PARTS (cont'd)
REAR OUTRIGGER HYDRAULICS
VI-36
Section VI - PARTS (cont'd)
REAR OUTRIGGER HYDRAULICS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
4
2
4
REF.
4
8
8
REF.
REF.
4
4
4
4
4
2
0300040
0300680
0301696
0301762
0301778
0301816
0301819
0302296
0302334
0302372
0302510
0302727
0303174
0303175
0303486
DESCRIPTION
CONNECTOR, 8MJ-8MP
VERTICAL CYLINDER
ELBOW, 6MJ-6FJX90
CONTROL VALVE, VDP12DDDDDD10
CONNECTOR, 10MB-6MJ
FITTING, 8FP-8FP45
BLACK PIPE NIPPLE, 1/2" X 4-1/2"
CONTROL VALVE, VDP12CDD118
CONTROL VALVE, VDP12CDCD10
HOSE ASSEMBLY, 240"
ADAPTER, 6MJ-6MBL
CONNECTOR, 6MJ-8MP
CONNECTOR, 10MB-6FB
HOSE ASSEMBLY, 102"
HORIZONTAL CYLINDER
VI-37
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS - UNDERLIFT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
1
--
0302352
--
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
1
--
0301811
--
DESCRIPTION
CYLINDER, UNDERLIFT LIFT
SEAL KIT, UNDERLIFT LIFT CYLINDER
DESCRIPTION
CYLINDER, UNDERLIFT EXTEND
SEAL KIT, UNDERLIFT EXTEND CYLINDER
VI-38
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS - UNDERLIFT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
1
--
0303042
--
DESCRIPTION
CYLINDER, UNDERLIFT FOLD
SEAL KIT, UNDERLIFT FOLD CYLINDER
VI-39
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS - WRECKER
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
2
--
0303092
0304434
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
1
--
0302830
0304333
DESCRIPTION
CYLINDER, BOOM LIFT
SEAL KIT, BOOM LIFT CYLINDER
DESCRIPTION
CYLINDER, BOOM EXTEND
SEAL KIT, BOOM EXTEND CYLINDER
VI-40
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS
FRONT OUTRIGGERS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
2
--
HC0124
--
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
2
--
HC0164
--
DESCRIPTION
CYLINDER, FRONT OUTRIGGER VERTICAL
SEAL KIT, CYLINDER
DESCRIPTION
CYLINDER, FRONT OUTRIGGER EXTEND
SEAL KIT, CYLINDER
VI-41
Section VI - PARTS (cont'd)
HYDRAULIC CYLINDERS
REAR OUTRIGGERS
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
2
--
0300680
--
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
2
--
0303486
--
DESCRIPTION
CYLINDER, REAR OUTRIGGER VERTICAL
SEAL KIT, CYLINDER
DESCRIPTION
CYLINDER, REAR OUTRIGGER EXTEND
SEAL KIT, CYLINDER
VI-42
Section VI - PARTS (cont'd)
BOOM SWIVEL ASSEMLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
--
1
0903776
--
1
0903777
1
2
3
4
5
6
7
8
9
10
1
1
2
1
3
2
1
1
1
1
0300113
0300311
0400133
0400140
0400392
0700511
0700563
0802027
0803573
0803574
DESCRIPTION
BOOM SWIVEL ASSEMBLY, LEFT
(COMPLETE)
BOOM SWIVEL ASSEMBLY, RIGHT
(COMPLETE)
GREASE FITTING
SHEAVE, 10"
SCREW, 3/8"-16 X 3" HEX HD CAP
SCREW, 3/8"-16 X 4" HEX HD CAP
NUT, 3/8"-16 NYLOK HEX
CABLE GUIDE, BOTTOMS
HAFT, SHEAVE
CABLE GUIDE WELDMENT
SWIVEL WELDMENT, LEFT
SWIVEL WELDMENT, RIGHT
VI-43
Section VI - PARTS (cont'd)
MODULAR LIGHT KIT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
2
24
0302542
0302543
0400025
DESCRIPTION
LIGHT, STOP & TURN
LIGHT, BACKUP
SCREW, #8-32 X 3/4" RD HD SLOTTED
VI-44
Section VI - PARTS (cont'd)
MODULAR LIGHT KIT (cont'd)
REF.
NO.
NO.
REQ'D
1
2
3
REF.
NO.
1
2
PART
NUMBER
0300442
0300507
0300511
NO.
REQ'D
DESCRIPTION
3-LIGHT BAR ASSEMBLY (COMPLETE)
BULB, MARKER LIGHT
LENS, 3-LIGHT BAR
PART
NUMBER
0302201
0302611
DESCRIPTION
LIGHT, FLOOD (COMPLETE)
LIGHT, AMBER OVAL (COMPLETE)
VI-45
Section VI - PARTS (cont'd)
MODULAR LIGHT KIT (cont'd)
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
18
0302544
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
0301742
DESCRIPTION
LIGHT, DOME (COMPLETE)
DESCRIPTION
MARKER LIGHT, SEALED AMBER
VI-46
Section VI - PARTS (cont'd)
MODULAR LIGHT KIT (cont'd)
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
1
1
1
0300076
0300273
0300512
DESCRIPTION
LICENSE PLATE BRACKET
LICENSE PLATE ILLUMINATOR
BULB, LICENSE PLATE ILLUMINATOR
VI-47
Section VI - PARTS (cont'd)
GLAD HAND ASSEMBLY
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
1
2
2
2
1
1
1
9
2
2
6
2
1
1
1
1
1
0301862
0301909
0301944
0301945
0301946
0301947
0301948
0302534
0400062
0400070
0400367
0400451
0400463
0703795
0706925
0710003
0710444
0802151
DESCRIPTION
CATERPILLER GROMMET
RECEPTACLE BOOT
GLAD HAND COUPLING
GLAD HAND PLUG
BULKHEAD CONNECTOR
ADAPTER, 1/4" NPM X 3/8" 45° SYN. HOSE
HD 7-WAY TRAILER CONNECTOR
ELBOW, 1/4" NPTM X 1/2" 45° SYN. HOSE
SCREW, 1/4"-20 X 3/4" HEX HD SELF-TAP
SCREW, 1/4"-20 X 1" HEX HEAD CAP
NUT, 1/4"-20 NYLOK HEX
FLATWASHER, 1/4"
FLATWASHER, 5/16"
HOSE, 3/8" X 4 FT. SYNTHETIC
HOSE, 1/2" X 4 FT. SYNTHETIC
SUPPORT, GLAD HAND BOX (Not Shown)
LID, GLAD HAND HOUSING
GLAD HAND HOUSING
VI-48
Section VI - PARTS (cont'd)
TRUCK WHEEL LIFT
REF.
NO.
NO.
REQ'D
PART
NUMBER
1
2
3
4
5
6
7
8
9
10
11
2
2
2
1
1
1
1
2
4
2
2
0301932
0303150
0303680
0802839
0802841
0802842
0802877
0902947
0903089
0903480
CH0100
DESCRIPTION
5/16" X 12' H.T. CHAIN ASSEMBLY (N.S.)
RATCHET W/ HOOK (N.S.)
TIE-DOWN STRAP, ADJUSTABLE (N.S.)
TIRE SUPPORT RIGHT
OUTER CROSSTUBE LEFT
OUTER CROSSTUBE RIGHT
TIRE SUPPORT LEFT
CROSSTUBE RETAINER PIN
RETAINER PIN
ADJUSTMENT TUBE
5/16" HOOK W/ PIN (N.S.)
VI-49
NOTES
NOTES
CENTURY®
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171
www.millerind.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement