Zavio D7111 Extreme Dome Quick Guide

D7111

86085G7000020

Zavio D7111 Quick Installation Guide

Please follow the installation steps below to set up your F7210 Box IP Camera.

Check the package contents against the list below. See P.1

Physical overview. See P.1

LED Indicator Definition. See P.2

DI/ DO Diagram. See P.2

I/O Terminal Pin Definition. See P.3

Install the hardware and connect all cables. See P.4

Microsoft OS: Use the software CD to install Intelligent IP Installer. See P.7

Access the IP Camera using Intelligent IP Installer. See P.7

Mac OS using Safari Browser. See P.9

Change light environment setting. See P.9

Change the Web Interface into your preferred language. See P.10

Application of IP Camera. See P.10

For more information, please check the User Manual available in the Software CD or you can download the latest software from http://www.zavio.com

Package Contents

Camera

Quick Installation Guide

Software CD

Accessory

Physical overview

D7111 IP Camera

User Manual

Language Packs

Brief product information and quick installation

IP Surveillance Software

Intelligent IP Installer

Three plastic anchors and screws

Alignment sticker

4pin, 2pin I/O terminal block

1

LED Indicator Definition

DI/DO Diagram

12V/1A

2

I/O Terminal Pin Definition

PIN Definition Description

Uses an NPN transistor with the emitter connected to the GND

1 Digital Output 1 pin. If used with an external relay, a diode must be connected in parallel with the load for protection against voltage transients.

2 Digital Input 1

Connected to GND to activate, or leave floating (or unconnected) to deactivate.

3 Ground

4 + 12V DC

Max. V/A

100 mA

24V

30V DC

-

12V DC

1.2W

3

4

c. Connect all cables c1. Without Power over Ethernet (PoE) connection

1. Connect the power adaptor to the IP Camera.

2. Using a standard RJ-45 network cable, connect the IP Camera to a normal Hub / Switch / Router.

c2. Power over Ethernet (PoE)

1. Using a standard RJ-45 network cable, connect the IP Camera to a PoE-enabled Hub / Switch / Router.

5

6

Microsoft OS:Use the software CD to install Intelligent IP Installer

Power on your PC and insert the CD-ROM. The setup page will show up automatically. Please follow these steps to install the firmware.

Select “Intelligent IP Installer” and follow the installation process to complete the installation.

Access the IP Camera using Intelligent IP Installer

1. Please check two settings before using Intelligent IP Installer .

a. Browser’s Internet Properties → Security b. Browser’s Internet Properties → Privacy

→ Default Level → Uncheck Pop-up Blocker

2. Click the Intelligent IP Installer Icon on your desktop. The main page will show up listing all active camera and video server devices. Select the relevant IP camera from the list and click Link to IE.

7

3. Enter your Username and Password to login to the IP Camera.

(Default is admin / admin)

4. When accessing the IP Camera for the first time, a yellow information bar appears below the address bar:

This website wants to install the following add-on: ‘AxvideoView.cab from ‘Zavio Inc’.

5. Click the information bar, and select Install ActiveX control.

6. Click Install.

7. Live video displays in the centre of your web browser.

8

Mac OS using Safari Browser

1. Select Safari icon

3. Enter name and password to login to the IP

2. Click Bonjour function and select the camera you wish to access.

4. The monitor image will be displayed in your browser.

camera. (Default is admin / admin)

Lighting environment setting

The default setting of lighting environment is Auto. However, you may also select 50 or 60 Hz upon the lighting environment of your country.

Go to “Setting > Live View > Camera Setting > Image Setting”, select the environment setting you wish.

9

Change the Web Interface into your preferred language

Use the settings screen to set the language of the Web Interface.

Go to

“Setting > System > Maintenance ”.

1. Insert Software CD into your CD-ROM.

2. Browse and select the preferred language from language pack in the Software CD and then click OK.

3. The web interface will change into your preferred language.

Application of IP Camera

.

10