Electric Desoldering Module Ref. MSE-A www.jbctools.com English

Electric  Desoldering  Module Ref.  MSE-A www.jbctools.com English
www.jbctools.com
English
Electric Desoldering Module
Ref. MSE-A
w w w.jbctools.com
Packing List
The following items should be included:
Electric Desoldering Module................ 1 unit
Ref. MSE-A
Module Cable connector ...................... 1 unit
Ref. 0014874
Filter Box ..................................................... 1 unit
Ref. 0005966
Cotton Filter ........................................... 10 units
Ref. 0781046
It contains 50 filters
Suction Filter ............................................. 1 unit
Ref. 0821830
Manual ...........................................................1 unit
w w w.jbctools.com
Electric Desoldering Module
Ref. MSE-A
2
3
w w w.jbctools.com
Features
Initial Set up
Control Unit
Ref. DDE
DME
For DDE Control Unit
1. After connecting the module, enter the
Peripherals Menu and select the port which
you want to join with the module.
17:14
Peripherals
Pedal
2. Select the module from the list of peripheral
connections. Remember your first connection
is denoted as “a”, the second being “b”, etc.
(e.g. MS_a, MS_b,...)
Module
Port 2-DR
None
Module
None
MS_a
None
3. Press Menu or Back to save changes.
For DME Control Unit
Tool
Ref. DR560-A
DS360-A
When a new module is detected, a pop-up screen appears and proceed as indicated.
If no screen is shown, click on the icon
on the main bar and follow the steps.
Module cable
connector
Ref. 0014874
17:14
Stand
Ref. DR-SD
DS-SD
?
Electric Desoldering Module
Ref. MSE-A
To another
peripheral
MENU
Appears only
when the
installation is
postponed
MODULE
To Pedal
Ref. P-005
Air pump
Install
Postpone
For DME and DDE Control Units
Suction Filter
Ref. 0821830
4
Once set up, you can change the module settings by entering the Peripherals Menu.
5
w w w.jbctools.com
Maintenance
Exploded View
Before carrying out maintenance or storage, always unplug the equipment.
- Keep the casing clean by using a damp cloth. Specially use a soft cloth for the front side.
- Periodically check all cable and tube connections.
- Keep filters clean to ensure proper solder suction and replace them when necessary.
Important: Do not use sharp pointed objects to open the suction filter.
Suction filter
Ref. 0821830
Cotton filters
Ref. 0781046
O Ring
Ref. 0007717
Filter cover
Ref. 0004710
Spare filters
Ref. 0005966
- Use original JBC spare parts only.
- Do not work with defective or damaged pieces.
- Repairs should only be performed by a JBC authorized technical service.
- Maintenance shall not be carried out by children unless supervised.
6
7
Specifications
-
-
-
-
Total weight: 1,2 Kg (2.6lb)
Size: 145 x 55 x 225 mm
Vacuum: 75% / 570 mmHg / 22.4 inHg
Flow rate: 9 SLPM
Complies with CE standards
ESD protected housing “skin effect”
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
www.jbctools.com
0014690-0415
Warranty
JBC’s 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear due to use
or mis-use.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement