Perception E Quick Ref Guide
TELEPHONE NUMBERS
CODE
AREA
TELEPHONE NUMBER
Quick
Reference . ..G”ide..-.-. ..--. _ . ..-.--_ _-.
This guide is a quick reference for operation of the
most frequently used electronic telephone features.
Detailed instructions for these and other features
are located in the PERCEPTION, Electronic Telephone User Guide. All buttons are referred to by
boxes with their titles printed in white. In the following procedures, unless otherwise specified,
always obtain dial tone first. Where Number is indicated, dial either the desired station number or outside telephone number.
4
vi
5
.-c
Outgoing Calls:
Voice: Trunk access + Number
Speakerphone (handset on-hook): m f Number
To disconnect: m
Data: Trunk access + Data Number + Data m
To disconnect: m
Station-to-Station
Voice: Number
Calls:
Speakerphone (handset on-hook): m f Number
To disconnect: m
Data: Data m + Number
To disconnect: m
Voice/Data (after conversation is established):
m + Data m + Data Number f Voice m
To disconnect: m
Automatic Dialing:
To store (handset on-hook): m f Trunk access -t
pause ( 1 ) f Number + m
To use: m
Alphanumeric
Message:
To set: m or 10 0 (on-hook) + I- 1 + m
To cancel: m or 10 0 (on-hook)
Repeat Last Number Dialed:
WorDa
Station Speed Dial:
TO store (handset on-hook): m (or I I El) + SD address code (0 - 9) t Trunk access + pause (1)
t Number + m
TO use: m (or 11) or m (or I I I) + SD address
code (0 - 9)
System Speed Dial:
Message Waiting:
To respond: m
To cancel: m or 11 (on-hook)
Call Holding and Transfer:
To park: m (or m + i 1)
To reconnect: m + m (or i 1)
w (or B.(il) + SDS address code (10 - 99)
To hold: m
To reconnect: m
Call Functions:
To transfer: m
Automatic Callback: m (or m + 10)
To cancel: m (on-hook) or I IO
Paging:
All zone: Access code
Single zone: Access code
Voice page: m
Call Forward:
All Call: m + Number + m
(or i 1 + Number + 1)
Busy: m + Number + m
(or m 0 1 + Number + 1)
No Answer: m + Number +
(or i 0 0 + Number + 1)
,
Busy/No Answer: m t N u m b e r + m
(or 111 + Number + 1)
Miscellaneous Features.
Account Number Recording during conversation:
m
Ca;c;k
or
*
m,
Call Pickup Directed: m
(or 1 (il + Number)
Call Pickup Group: m
Conferencing: m
w,
m,
Call Waiting: m
(or 11) + Account code
(or m
11)
To return to held call: m
Executive Override: m
(or m
+ II)
Manual Signal: m (on-hook)
m,
+ Number
Privacy Release: w (joining station: m)
Universal Night Answer: m or IO
Voice Mail:
(or 11)
t Number + m
Consultation Call: m
+ m
Automatic Wake-up: 1 (il 1 + 4-digit time
To cancel: flii + 11 m 1
Call Forward System:
Busy: m + Number + m
(or I[ 1 + Number + 1)
Busy/No Answer: m + N u m b e r + m
(or I[ 1 + Number + 1)
Cakrw&
: I
+ Number (hang up)
+ Number
Do Not Disturb:
To set: m (or i 1)
To cancel: m (or I/// 1)
Messaging:
Station-to-Station
Messaging:
To set (station-to-station): Number + m
To respond: m
To cancel (from calling station): Number + m
To cancel (from called station): m (on-hook)
See manufacturer’s literature for instructions on
using Voice Mail. The following instructions may
vary slightly, depending on the Voice Mail system
used.
To Call Forward to Voice Mail: Call Forward button
or access code (see Call Forward) + Voice Mail
number + your mailbox number + Call Forward
button (or 1 if access code is used)
To cancel:. Call Forward button or p 1 B
Message Waiting:
To set m button to automatically retrieve your
messages (on-hook): m + Voice Mail number +
your message retrieval sequence + m
To respond: m
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement