INTERNATIONAL ITEM# Infusion Series™ iMIX Dispenser with 4 Hoppers PROJECT DATE Features iMIX-4 Portion Control Dimensions: 32.8”H x 19.3” W x 24” D (83.2cm H x 49.1cm W x 61cm D) iMIX Dispensers with 4 Hoppers • Capacity: Four, 8-pound (3.6 kg) hoppers. • Large, lighted front graphics for merchandising. • Additional displays for hot chocolate, steamers and chai tea available. • 26.5 litre (7-gallon) hot water tank to meet peak serving times. • Cup clearance at 7.25” (18.4 cm) to accommodate popular cup sizes (adjustable to 8.12” (20.6 cm)). • Key service components easily accessible through front and top. • High speed, heavy-duty whipper for complete product mixing. • Front of machine access to tank drain, dump valves, auger and whipper motors and control board for easy service. • Key lock on the door prevents tampering. • Contemporary styling for striking visual statement. • Low product detection system alerts audibly and with message on display when hoppers are low. • New digital technology adds night mode to prevent pilferage. • Alphanumeric display communicates advertising messages, machine status and technical support contact information. • Spring-loaded, all metal auger drive system for easy hopper installation. • Machine can be ordered with left or right-hinged doors to support side by side placement. • Front of machine set up and calibration. • Auger motors with RPM feedback monitoring assure consistent ﬂavors and proﬁts by controlling powder dosing. For current speciﬁcation sheets and other information, go to www.bunn.com. Related Products Easy Clear® EQHP-10 Product No. : 39000.0004 Easy Clear® EQHP-10L Product No. : 39000.0001 Features deluxe whipper chambers: 1. Robust whipper to ensure full ﬂavor yield. 2. Specially designed self cleaning mixing chamber. 3. Exhaust fan to siphon off moisture that can cause powder buildup. 4. Hot water dispense for easy clean-out. 5. Quick disconnecting parts for thorough sanitizing. Patents Apply 12/06 D5.1 Dimensions & Speciﬁcations Model iMIX-4A BLK Portion Control Product # Volts Amps Watts Capacity Shipping Weight Cord Attached 37000.0009 230 15 3600 8.5 gal/hr (32.2 l/hr) 132 lbs. (59.87 kg) No Agency Burst Capacity: 68 - 354.9 mL (12 oz.) servings in 37 minutes. (to -10˚F (-23.3˚C) peak serving temperature) Electrical: 230V model requires 2-wires plus ground service rated 220-240V, single phase, 50/60 Hz. Plumbing: 20-100 psi (138-690 kPa) from a 1/4” or larger supply line. A shut-off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied with 1/4” male ﬂare ﬁtting. Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springﬁeld, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com BUNN® practices continuous product research and improvement. We reserve the right to change speciﬁcations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. All dimensions shown in centimeters. Bunn-O-Matic Corporation owns all copyrights relating to materials in this publication. Please contact BUNN to request permission to reproduce any portion of this publication.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project