Corning CCH-CP Connector Housing Panels STANDARD RECOMMENDED PROCEDURE

Below you will find brief information for Connector Housing Panels CCH-CP. This document provides instructions for installing a connector housing panel, including steps for preparing the panel, feeding the pigtail, and mating the connectors. It also includes safety precautions for working with fiber optic cables. The document covers different connector types, including ST, SC, and LC. It also includes a color code for pigtailed connector panels.

PDF Download

Document

CCH Connector Panel

p/n 003-437, Issue 6 related literature |

LAN-133-EN Closet Connector Housing Panels (CCH-CP)

• Visit www.corning.com/cablesystems/safety for full safety precautions

Precautions

WARNING: Never look directly into the end of a fiber that may be carrying laser light.

Laser light can be invisible and can damage your eyes. Viewing it directly does not cause pain. the iris of the eye will not close involuntarily as when viewing a bright light. Consequently, serious damage to the retina of the eye is possible. Should accidental eye exposure to laser light be suspected, arrange for an eye examination immediately.

WARNING: DO NOt use magnifiers in the presence of laser radiation. Diffused laser light can cause eye damage if focused with optical instruments. Should accidental eye exposure to laser light be suspected, arrange for an eye examination immediately.

Installation

1 Pull to open.

Push to install.

1. Remove blank panel (not shown).

Pull plungers on panel to open.

2. If panel has pigtail (see LC panel), feed

pigtail into opening in hardware.

3. Push plungers into holes to install.

4. Clean adapters and connectors; then mate.

ST ® Compatible SC

(Pigtailed version shown)

Color Code for

Pigtailed Connector Panels

COLOR

Blue

Orange

Green

Brown

Slate

White

Red

Black

Yellow

Violet

Rose

Aqua

FIBER

TPA-2893

Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA

1-800-743-2671 • FAX +1-828-325-5060 • International +1-828-901-5000 • http://www.corning.com/cablesystems

Corning Cable Systems reserves the right to improve, enhance, and modify the features and specifications of Corning Cable Systems’ products without prior notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc All trademarks are the properties of their respective owners. Corning Cable

Systems is ISO 9001 certified.

STANDARD RECOMMENDED PROCEDURE 003-437 | ISSUE 6 | AUgUSt 2010 | PAGE 1 OF 1

Hello! I am an AI chatbot specifically trained to assist you with the Corning CCH-CP Connector Housing Panels STANDARD RECOMMENDED PROCEDURE. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

Provides instructions for installing connector housing panels
Includes safety precautions
Covers different connector types
Includes color code for pigtailed connector panels

Frequently asked questions

Follow the provided instructions: 1. Remove blank panel. 2. Pull plungers on panel to open. 3. If panel has pigtail, feed pigtail into opening in hardware. 4. Push plungers into holes to install. 5. Clean adapters and connectors, then mate.

Never look directly into the end of a fiber that may be carrying laser light. Laser light can be invisible and can damage your eyes. Do not use magnifiers in the presence of laser radiation. Diffused laser light can cause eye damage if focused with optical instruments.

ST, SC, and LC connectors are supported.