Methven Handset Installation Guide

Below you will find brief information for Handset. This guide provides installation instructions and information about the Handset and its features. It also discusses the operating pressure, temperature, and inlet connections required for proper functionality.

PDF Download
Document
Handset Installation Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Operating Pressure: 35kPa - 500kPa
  • Operating Temperature: 5°C - 70°C
  • Inlet Connections: ½" BSP
  • Flow restrictor for low pressure systems
  • Filter washer for cleaning
  • Lime scale removal instructions
  • Warranty information

Frequently asked questions

The minimum operating pressure is 35kPa/0.35bar and the maximum is 500kPa/5bar. However, regional regulations may apply.

The optimal operating pressure for the Handset is between 150kPa/1.5bar and 500kPa/5bar.

The minimum operating temperature is 5°C and the maximum is 70°C. However, regional regulations may apply.

The Handset requires ½" BSP inlet connections.

Never use abrasives or abrasive cleaning agents. Clean regularly with warm soapy water and a damp soft cloth. Periodically clean the filter washer in the hose cone. If lime-scale builds up, soak the shower in lime-scale remover for up to 10 minutes. Do not use products containing chlorine bleach or hydrochloric acid.
Preparing document for printing…
0%