MDC_320MG400MG460MGP..

MDC_320MG400MG460MGP..
SEC-VD-DSW Multiple Display Control - 0008
Ver. 2.2
2008-10-17
Multiple Display Control Protocol
for SyncMaster 42TS/42PS P50Hn
P50F(n) P63F(n)
320MX(n) 400CX(n)
400MX(n) 460CX(n)
Copyright © 2003 2008 Samsung Electronics Co., Ltd
SEC-VD-DSW External Control - 0008
SEC-VD-DSW Multiple Display Control - 0008
Ver. 1.0
2008-06-26
Copyright notice
This document is Copyright © Samsung Electronics, Co. - all rights reserved.
「This document is a technical asset of Samsung Electronics, Co. and using or copying
this material without the authorization from the technical data management group is strictly
prohibited..」
Contact Information
Display S/W Group, VD Business Division
Samsung Electronics Co., Ltd
Address :
416, Maetan-3Dong, Paldal-Gu,
Suwon City, Kyungki-Do, Korea
442-742
Telephone : 82-31-277-2764
E-mail
: [email protected]
Prepared by : Display S/W, Video Display Division.
Status : Prepared
Subject : Technical Writer, Programmer, Developer
Outline : Protocol type document of Multiple Display Control 1.0
History :
Version
Date
Content
Prepared by
1.0
2005. 01. 05.
Protocol for Multiple Display Control
S. Jang
1.1
2005. 01. 07
Add Safety Lock
S. Jang
1.2
2005. 01. 18
Add Video Wall
J. Lee
1.3
2005. 01. 26
modify Maintenance Control
S. Jang
1.4
2005. 03. 11
modify Baudrate, PIP Control
J. Lee
1.5
2005. 07. 04
Add Commands
S. Jang
1.6
2005. 11. 11
Add Command ( Screen Scroll On)
S. Jang
1.7
2006. 02. 01
Add Commands
H. Park
1.8
2006. 10. 02
Add Commands
H. Park
Compared by
Display S/W, VD Business Team, Samsung Electronics
1
SEC-VD-DSW External Control - 0008
1.9
2006. 12. 18
Add Commands ( New Video Wall )
H. Park
Version
Date
Content
Prepared by
2.0
2007. 04. 17.
Add Commands
H. Park
2.1
2008. 06. 26.
Add Commands
J. Choi
2.2
2008. 10. 17.
Modify Commands
(Model Number Control Command)
B.I. Choi
Compared by
Display S/W, VD Business Team, Samsung Electronics
2
SEC-VD-DSW External Control - 0008
1. INTERFACE
1.1. Connecting Method
1) Connecting method
- As of Figure 1-1, connect RS232-In(9Pin) to Personal Computer, connect the next
TV of Display to be connected from RS232-Out (9Pin).
- In doing so, each TV or Monitor ID can be given from 0 to 99.
- ID cannot be given duplicated.
- When granting ID, it does not need to be given out in the connecting order.
Figure1-1 PC,TV or Monitor connecting method
UART LCD 1
IN
OUT
UART LCD 2
IN
OUT
UART LCD 3
IN
OUT
UART LCD 4
IN
OUT
RS232
Personal
Computer
Display S/W, VD Business Team, Samsung Electronics
3
SEC-VD-DSW External Control - 0008
1.2. Connection Spec.
1) Connection Spec.
- Interactive communications using RS232.
- Of RS232 standards, three signals TxD(No.2), RxD(No.3) and GND(No.5) are used →
Refer to Figure 1
- Limit the distance between devices to less than 4m.
- Currently, out of 9 PIN RS232 terminal, PINS in use are numbers 2, 3 and 5.
- ID should show hexadecimal value of assigned ID, but ID 0 should be 0xFF.
- Every communication will be made in hexadecimals and Checksum is the sum of all
remainings. If it exceeds two digits, for example, it is 11+FF+01+01=112, discard the
number in the first digit like below.
example) Power On & ID=0
Header
Command
0xAA
0x11
→
ID
Header
Command
0xAA
0x11
Data Length
Data 1
1
Power
0xFF
Check
Sum
Data Length
Data 1
1
1
12
- If you want to control every mechanism connected with Serial Cable regardless of its
ID, set ID part to "0xFE" and send commands. At the time, each SET will follow
commands but it will not respond with ACK.
Table 2-1 RS232 Network spec
Bits Rate
9600 bps
Data Bits
8 bits
Parity
None
Stop Bits
1 bit
Flow Control
None
Display S/W, VD Business Team, Samsung Electronics
4
SEC-VD-DSW External Control - 0008
Figure 2-1 RS-232 pin out DB-9 pin used for Asynchronous Data
Display S/W, VD Business Team, Samsung Electronics
5
SEC-VD-DSW External Control - 0008
2. Commanding words
No
Command Type
Command
Value Range
1
Status Control
0x00
-
2
Time Control
0x01
-
3
On Time Control
0x02
-
4
Off Time Control
0x03
-
5
Video Control
0x04
-
6
Audio Control
0x05
-
7
RGB Control
0x06
-
8
Maintenance Control
0x08
-
9
Serial Number Control
0x0B
-
10
Display Status Control
0x0D
-
11
Software Version Control
0x0E
-
12
Model Number Control
0x10
-
13
Power Control
0x11
0 ~ 1
14
Volume Control
0x12
0 ~ 100
15
Mute Control
0x13
0 ~ 1
16
Input Source Control
0x14
-
17
Image Size Control
0x15
-
18
Direct Channel Control
0x16
-
19
Screen Mode Control
0x18
-
20
Screen Size Control
0x19
0 ~ 255
21
Red Offset Control
0x1A
0 ~ 100
22
Green Offset Control
0x1B
0 ~ 100
23
Blue Offset Control
0x1C
0 ~ 100
24
Contrast Control
0x24
0 ~ 100
25
Brightness Control
0x25
0 ~ 100
26
Sharpness Control
0x26
0 ~ 100
27
Color Control
0x27
0 ~ 100
28
Tint Control
0x28
0 ~ 100
29
Red Gain Control
0x29
0 ~ 100
30
Green Gain Control
0x2A
0 ~ 100
Display S/W, VD Business Team, Samsung Electronics
6
SEC-VD-DSW External Control - 0008
31
Blue Gain Control
0x2B
0 ~ 100
32
Treble Control
0x2C
0 ~ 100
33
Bass Control
0x2D
0 ~ 100
34
Coarse Control
0x2F
0 ~ 1
35
Fine Control
0x30
0 ~ 1
36
H-Position Control
0x31
0 ~ 1
37
V-Position Control
0x32
0 ~ 1
38
Clear Menu Control
0x34
0
39
Remote Control
0x36
0 ~ 1
40
RGB Contrast Control
0x37
0 ~ 100
41
RGB Brightness Control
0x38
0 ~ 100
42
Auto Adjustment Control
0x3D
0
43
Color Tone Control
0x3E
0 ~ 4
44
Color Temperature Control
0x3F
0 ~ 10
45
Pixel Shift Control
0x4C
-
46
Video Wall Control
0x4F
-
47
Auto Lamp Control
0x57
-
48
Manual Lamp Control
0x58
0 ~ 100
49
Safety Screen Run Control
0x59
0 ~ 6
50
Safety Screen Control
0x5B
-
51
Video Wall Mode Control
0x5C
0 ~ 1
52
Safety Lock
0x5D
0 ~ 1
53
Panel Lock
0x5F
0 ~ 1
54
OSD On/OFF
0x70
0 ~ 1
55
P. Mode Control
0x71
-
56
S. Mode Control
0x72
0 ~ 4
57
NR Mode Set
0x73
0 ~ 1
58
PC Color Tone Control
0x75
0 ~ 3
59
Auto AutoAdjustment
0x76
0 ~ 1
60
All Keys Lock
0x77
0 ~ 1
61
SRS TSXT Control
0x78
0 ~ 1
62
Film Mode
0x79
0 ~ 1
63
Signal Balance
0x7A
0 ~ 1
64
SB Gain
0x7E
0 ~ 100
65
SB Sharpness
0x7F
0 ~ 100
Display S/W, VD Business Team, Samsung Electronics
7
SEC-VD-DSW External Control - 0008
66
Panel On Time
0x83
-
67
Video Wall On
0x84
0 ~ 1
68
Temperature Control
0x85
0 ~ 125
69
Brightness Sensor
0x86
0 ~ 1
70
Dynamic Contrast
0x88
0 ~ 1
71
Safety Screen On
0x88
1 ~ 5
72
Video Wall User Control
0x89
-
73
Model Name
0x8A
-
"-" indicates multiple setting items-refer to "2.1. Command Detailed Explanation" for more
details.
Display S/W, VD Business Team, Samsung Electronics
8
SEC-VD-DSW External Control - 0008
2.1. Command Detailed Explanation
* Status Control
●
Function
Personal Computer shows current setting condition of TV / Monitor.
●
●
Get Status
Header
Command
0xAA
0x00
Header
Command
0xAA
0xFF
Val 3
Val 4
Val 5
Mute
Input
Aspect
ID
Data Length
0
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
9
'A'
0x00
Power
Volume
Val 6
Val 7
Check
Sum
Ack
ID
N Time NF F Time NF
Power : Power code to be set on TV / Monitor
Volume : Volume value code ( 0 ~ 100 ) to be set on TV / Monitor
Mute : Mute code to be set on TV / Monitor
Input : Input Source code to be set on TV/Monitor
Aspect : Image Size code to be set on TV/Monitor
N Time NF : OnTime ON/OFF value of time to set TV/Monitor
F Time NF : OffTime ON/OFF value of time to set TV/Monitor
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x00
ERR
Check
Sum
ERR : Error code that shows what occurred error is
0
Check Sum Error
1
etc.
Display S/W, VD Business Team, Samsung Electronics
9
SEC-VD-DSW External Control - 0008
* Time Control
●
Function
Personal Computer controls current time of TV / Monitor.
●
●
Get Time Status
Header
Command
0xAA
0x01
ID
Data Length
0
Check
Sum
Data Length
Data 1
Data 2
Data 3
Data 4
5
AP Time
H Time
M Time
0
Set Time
Header
Command
0xAA
0x01
Data 5
Check
Sum
0
AP Time
ID
: AM/PM value to be set on TV/Monitor
1
AM
0
PM
H Time : Hour value ( 1 ~ 12 ) to be set on TV/Monitor
M Time : Minute value ( 0 ~ 59 ) to be set on TV/Monitor
●
Ack
Header
Command
0xAA
0xFF
Val 3
Val 4
Val 5
M Time
0
0
ID
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
7
'A'
0x01
AP Time
H Time
Check
Sum
Check
Sum
AP Time, H Time, M Time : Same as above
H Time, M Time if current time was not set on Monitor, 0xFF
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x01
ERR
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 10
SEC-VD-DSW External Control - 0008
* On Time Control
●
Function:
Personal Computer controls the time that TV / Monitor turns on.
●
●
Get On Time Status
Header
Command
0xAA
0x02
ID
Data Length
0
Check
Sum
Data Length
Data 1
Set On Time
Header
Command
0xAA
0x02
Data 5
Data 6
N Time NF N Time SC
ID
6
Data 2
Data 3
Data 4
N AP Time N H Time N M Time N Time VR
Check
Sum
N AP Time : On Time AM/PM value to be set on TV/Monitor
1
AM
0
PM
N H Time : On Time Hour value ( 1 ~ 12 ) to be set on TV/Monitor
N M Time : On Time Minute value ( 0 ~ 59 ) to be set on TV/Monitor
N Time VR : On Time Volume value ( 0 ~ 100 ) to be set on TV/Monitor
N Time NF : On Time ON/OFF value to be set on TV/Monitor
1
On Time ON
0
On Time OFF
N Time SC : On Time ON/OFF Control Source value (refer to Input Source Control )
●
Ack
Header
Command
0xAA
0xFF
Val 3
Val 4
ID
Val 5
Data Length
Ack/Nak
r-CMD
8
'A'
0x02
Val 6
Check
Sum
N M Time N Time VR N Time NF N Time SC
Val 1
Val 2
N AP Time N H Time
N AP Time, N H Time, N M Time, N Time VR, N Time NF, N Time SC : Same as
above
N H Time, N M Time if On Time was not set on Monitor, 0xFF
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x02
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 11
SEC-VD-DSW External Control - 0008
* Off Time Control
●
Function
Personal Computer controls the time that TV / Monitor turns off.
●
●
Get Off Time Status
Header
Command
0xAA
0x03
ID
Data Length
0
Check
Sum
Data Length
Data 1
Set Off Time
Header
Command
0xAA
0x03
Data 5
Data 6
F Time NF
ID
0
6
Data 2
Data 3
F AP Time F H Time F M Time
Data 4
0
Check
Sum
F AP Time : Off Time AM/PM value to be set on TV/Monitor
1
AM
0
PM
F H Time
: Off Time Hour value ( 1 ~ 12 ) to be set on TV/Monitor
F M Time
: Off Time Minute value ( 0 ~ 59 ) to be set on TV/Monitor
F Time NF : Off Time ON/OFF value to be set on TV/Monitor
●
1
Off Time ON
0
Off Time OFF
Ack
Header
Command
0xAA
0xFF
Val 3
Val 4
Val 5
F M Time
0
F Time NF
ID
Data Length
Ack/Nak
r-CMD
8
'A'
0x03
Val 6
0
Val 1
Val 2
F AP Time F H Time
Check
Sum
F AP Time, F H Time, F M Time, F Time NF : Same as above
F H Time, F M Time if Off Time was not set on, 0xFF
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x03
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 12
SEC-VD-DSW External Control - 0008
* Video Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
Personal Computer shows the screen condition of TV / Monitor.
●
●
Get Video Status
Header
Command
0xAA
0x04
Header
Command
0xAA
0xFF
Val 3
Val 4
Val 5
Sharpness
Color
Tint
ID
Data Length
0
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x0A
'A'
0x04
Contrast
Brightness
Ack
ID
Val 6
Val 7
Val 8
ColorTone ColorTemp
0
Check
Sum
Contrast, Brightness, Sharpness, Color, Tint, ColorTone, ColorTemp :
Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x04
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 13
SEC-VD-DSW External Control - 0008
* Audio Control
●
Function
Personal Computer shows the sounds condition of TV / Monitor.
●
●
Get Audio Status
Header
Command
0xAA
0x05
Header
Command
0xAA
0xFF
Val 3
Check
Sum
ID
Data Length
0
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x05
'A'
0x05
Treble
Bass
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x05
ERR
Check
Sum
Ack
Balance
ID
Treble, Bass, Balance : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 14
SEC-VD-DSW External Control - 0008
* RGB Control (PC, BNC, DVI Only)
●
Function
Personal Computer shows screen condition of TV / Monitor.
●
●
Get Video Status
Header
Command
0xAA
0x06
Header
Command
0xAA
0xFF
ID
Data Length
0
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x0A
'A'
0x06
Contrast
Brightness
Ack
Val 3
Val 4
ColorTone ColorTemp
ID
Val 5
0
Val 6
Val 7
Val 8
Red Gain Green Gain Blue Gain
Check
Sum
Contrast, Brightness, ColorTone, ColorTemp, Red, Green, Blue : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x06
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 15
SEC-VD-DSW External Control - 0008
* Maintenance Control
●
Function
Personal Computer shows maintenance state of TV / Monitor.
●
●
Get Maintenance Status
Header
Command
0xAA
0x08
Header
Command
0xAA
0xFF
Data Length
ID
0
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x15
'A'
0x08
Power
P.Size
Ack
ID
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Val 9
Val 10
P.Source
LMax_H
LMax_M
LMax_AP
LMaxValue
LMin_H
LMin_M
LMin_AP
Val 11
Val 12
Val 13
Val 14
Val 15
Val 16
LMinValue
LampValue
ScreenInterval
ScreenTime
ScreenType
V.Wall
Val17
Val 18
Val19
Check
V.WallFormat
V.WallDivid
V.WallSet
Sum
Power : Power code set on TV / Monitor
P.Size : P.Size value code set on TV / Monitor
P.Source : Source value code set on TV / Monitor
LMax_H : Auto Lamp Max Time Hour (1 ~ 12) set on TV / Monitor
LMax_M : Auto Lamp Max Time Minute (0 ~ 59) set on TV / Monitor
LMax_AP : Auto Lamp Max Time AM/PM set on TV / Monitor
LMaxValue : Auto Lamp Max value (0 ~ 100) set on TV / Monitor
LMin_H : Auto Lamp Min Time Hour (1 ~ 12) set on TV / Monitor
LMin_M : Auto Lamp Min Time Minute (0 ~ 59) set on TV / Monitor
LMin_AP : Auto Lamp Min Time AM/PM set on TV / Monitor
LMinValue : Auto Lamp Min value (0 ~ 100, 0xFF) set on TV / Monitor
LampValue : Manual Lamp Control value (0 ~ 100, 0xFF) set on TV / Monitor
ScreenInterval : Safety Screen Interval (Per Hour, 0(0ff)~10) set on TV / Monitor
ScreenTime : Safety Screen Time (Per Second, 0(off) ~5) set on TV / Monitor
ScreenType : Safety Screen Type (3 ~ 6) set on TV / Monitor
V.Wall : Video Wall Mode code set on TV / Monitor
V.WallFormat : Video Wall Format code set on TV / Monitor
V.WallDivid : Video Wall Divider code set on TV / Monitor
V.WallSet : Video Wall Set Number code set on TV / Monitor
Caution : If LMinValue is Returned to 0xFF then Auto Lamp Control is OFF.
If LampValue is Returned to 0xFF then Manual Lamp Control is OFF.
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x08
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 16
SEC-VD-DSW External Control - 0008
* Serial Number Control
●
Function
Personal Computer controls serial number of TV / Monitor.
●
●
Get SerialNum Status
Header
Command
0xAA
0x0B
Data Length
ID
0
Check
Sum
Ack SerialNum
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x10
'A'
0x0B
Data1
Data2
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Val 9
Val 10
Data3
Data4
Data5
Data6
Data7
Data8
Data9
Data10
Val 11
Val 12
Val 13
Val 14
Check
Data11
Data12
Data13
Data14
Sum
Data1 ~ Data14 : Serial Number set on TV / Monitor.
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x0B
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 17
SEC-VD-DSW External Control - 0008
* Display Status Control
●
Function
Personal Computer shows display condition of TV / Monitor.
●
●
Get Maintenance Status
Header
Command
0xAA
0x0D
Header
Command
0xAA
0xFF
ID
Data Length
0
Check
Sum
Data Length
Ack/Nak
r-CMD
0x08
'A'
0x0D
Ack
ID
Val 1
Val 2
Lamp Temperature
Val 3
Val 4
Val 5
Val 6
Check
Bright_Sensor
No_Sync
Cur_Temp
FAN
Sum
Lamp : Lamp Error code (0 : Normal, 1 : Error) to be set on TV / Monitor
Temperature : Temperature Error code (0: Normal, 1: Error) to be set on TV /
Monitor
Bright_Sensor : Brighte Sensor Error code (0: Normal, 1: Error) to be set on
TV/Monitor
No_Sync: Sync Error code(0: Normal, 1: Error, No Sync) to be set on TV / Monitor
Cur_Temp : Current temperature of TV / Monitor
FAN : Fan Error code (0 : Normal, 1 : Error) to be set on TV / Monitor
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x0D
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 18
SEC-VD-DSW External Control - 0008
* SW Version Control
●
Function
Personal Computer shows version information of TV / Monitor.
●
●
Get Version Status
Header
Command
0xAA
0x0E
Header
Command
0xAA
0xFF
ID
Data Length
0
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x11
'A'
0x0E
Version1
Version2
Ack
Val 3
Val 4
ID
Val 5
Version3 Version4 Version5
Val 6
Val 7
Val 8
Val 9
Version6
Version7
Version8 Version9 Version10
Val 11
Val 12
Val 13
Val 14
Val 15
Check
Version11
Version12
Version13
Version14
Version15
Sum
Val 10
Version1 ~ Version11 : Project Info. of TV/Monitor
Version12 ~ Version15 : Software version of TV/Monitor
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x06
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 19
SEC-VD-DSW External Control - 0008
* Model Number Control
●
Function
Personal Computer grasps and shows model number of TV / Monitor.
●
●
Get Model Number Status
Header
Command
0xAA
0x10
ID
Data Length
0
Check
Sum
Ack
Header Command
0xAA
0xFF
ID
Data Length Ack/Nak r-CMD
0x05
'A'
0x10
Val 1
Val 2 Val 3 Check Sum
Species Model
TV
0
Species : Types of panel used in TV / Monitor
0x01
PDP
0x02
LCD
0x03
DLP
Model : TV / Monitor Model Name
0x01
PPM50H2
0x13
SyncMaster 400TX(n)
0x02
PPM42S2
0x14
SyncMaster 570DX
0x03
PS-42P2ST
SyncMaster 320DX
0x04
PS-50P2HT
SyncMaster 820DX
0x05
SyncMaster 400T
0x06
SyncMaster 403T
0x07
PPM42S3, SPD-42P3SM
SyncMaster 700DX(n)
0x08
PPM50H3, SPD-50P3HM
SyncMaster 820DX(n)
0x09
PPM63H3, SPD-63P3HM
0x0A
PS-42P3ST
0x0B
SyncMaster 323T
0x0C
0x0D
0x0E
0x10
0x15
SyncMaster 400DX(n)
SyncMaster 460DX(n)
0x16
SyncMaster 460TX(n)
0x17
SyncMaster 400UX(n)
SyncMaster 460UX(n)
SyncMaster 403T CT40CS(N)
0x18
SyncMaster 42TS/42PS
0x19
SyncMaster P50Hn
PPMxxM5x
0x1A
SyncMaster P50F/P50Fn
SyncMaster 460P(n)
0x1B
SyncMaster P63F/P63Fn
SyncMaster 400P(n)
0x1C
SyncMaster 320MX/320MXn
SyncMaster 320P(n)
0x1D
SyncMaster 400CX/400CXn
SyncMaster 400MX/400MXn
0x1E
SyncMaster 400MX/400MXn
0x20
SyncMaster 460CX/460CXn
SyncMaster 460MX/460MXn
SyncMaster 320Px
SyncMaster 400Px/400Pxn
SyncMaster 460Px/460Pxn
TV : TV support of TV / Monitor
0x00
does not support TV
0x01
does support TV
Display S/W, VD Business Team, Samsung Electronics 20
SEC-VD-DSW External Control
● Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x10
ERR
Check
Sum
ERR : Error code that shows what occurred error is
21
SEC-VD-DSW External Control - 0008
* Power Control
●
Function
Personal Computer turns TV / Monitor power ON/OFF.
●
●
Get Power ON/OFF Status
Header
Command
0xAA
0x11
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Power
Set Power ON/OFF
Header
Command
0xAA
0x11
ID
Check
Sum
Power : Power code to be set on TV / Monitor
●
1
Power ON
0
Power OFF
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x11
Power
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x11
ERR
Check
Sum
Power : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 22
SEC-VD-DSW External Control - 0008
* Volume Control
●
Function
Personal Computer changes volume of TV / Monitor.
●
●
Get Volume Status
Header
Command
0xAA
0x12
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Volume
Set Volume
Header
Command
0xAA
0x12
ID
Check
Sum
Volume : Volume value code to be set on TV/Monitor (0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x12
Volume
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x12
ERR
Check
Sum
Volume : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 23
SEC-VD-DSW External Control - 0008
* Mute Control
●
Function
Personal Computer turns TV / Monitor mute ON/OFF.
●
●
Get Mute ON/OFF Status
Header
Command
0xAA
0x13
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Mute
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x13
Mute
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x13
ERR
Set Mute ON/OFF
Header
Command
0xAA
0x13
ID
Mute : Mute code to be set on TV / Monitor
●
1
Mute ON
0
Mute OFF
Ack
Header
Command
0xAA
0xFF
ID
Check
Sum
Mute : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 24
SEC-VD-DSW External Control - 0008
* Input Source Control
●
Function
Personal Computer changes input source of TV / Monitor.
●
●
Get Input Source Status
Header
Command
0xAA
0x14
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Input
Set Input Source
Header
Command
0xAA
0x14
ID
Check
Sum
Input : Input Source code to be set on TV / Monitor
0x14
PC
0x1E
BNC
0x18
DVI
0x0C
AV
0x04
S-Video
0x08
Component
0x20
MagicNet
0x1F
DVI_VIDEO
0x30
RF(TV)
0x40
DTV
0x21
HDMI
0x22
HDMI_PC
Caution : DVI_VIDEO, HDMI_PC → Get Only
In the case of MagicNet, only possible with models include MagicNet.
In the case of TV, only possible with models include TV.
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x14
Input
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x14
ERR
Check
Sum
Input : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 25
SEC-VD-DSW External Control
* Picture Size Control
●
Function
Personal Computer changes Picture Size of TV / Monitor.
Cannot control when Video Wall is on.
●
●
Get Picture Size Status
Header
Command
0xAA
0x15
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Aspect
Set Picture Size
Header
Command
0xAA
0x15
ID
Check
Sum
Aspect : Picture Size ㅊode to be set on TV / Monitor
PC1, PC2, DVI, BNC
0x10
16 : 9
0x18
4 : 3
AV, S-VIdeo, Component
0x00
Auto Wide
0x01
16 : 9
0x04
Zoom
0x05
Zoom1
0x06
Zoom2
0x09
Just Scan
0x31
Wide Zoom
0x0B
4 : 3
0x0C
Wide Fit
Caution :For some Image, sizes are not supported depending on some input signals
(720p, 1080i).
For MFM model only possible for those include Europe TV if size is Auto Wide.
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x15
Aspect
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x15
ERR
Check
Sum
Aspect : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
26
SEC-VD-DSW External Control
* Direct Channel Control (DTV)
Caution :
Only works with models include TV.
Function
●
Personal Computer can control TV Channel.
Get Channel
●
●
●
Header
Command
0xAA
0x17
Data Length
ID
Check
Sum
0
Set Channel
Header
Command
0xAA
0x17
ID
Data
Length
Data 1
Data 2
Data 3
Data 4
0x09
Country
ATV_DTV
AirCable
CH_NUM
Data 5
Data 6
Data 7
Data 8
Sel_Minor
Minor_CH
Reserved
Reserved
Check
Sum
Ack
Header
Command
0xAA
0xFF
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
AirCable
CH_NUM
Sel_Minor
Minor_CH
0
0
ID
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x06
'A'
0x16
Country
ATV_DTV
Check
Sum
Country : Select the country to be set on TV / Monitor (0 : Korea, 1: USA, .... )
ATV_DTV : Select Analog TV and DTV to be set on TV / Monitor ( 0 : Analog TV,
1: Digital TV)
AirCalbe : Select if TV is cabled or general ( 0 : general, 1: cabled)
CH_NUM : TV channel number to be set on TV / Monitor ( Analog TV : 1 ~ 135 ,
Digital TV : 0 ~ 999)
Sel_Minor : Select minor channel when DTV is to be set on TV / Monitor( 0 : minor
channel not selected. 1: minor channel selected.)
Minor_CH : Select minor channel number when DTV is to be set on TV / Monitor
( 0 ~ 999.)
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x17
ERR
Check
Sum
ERR : Error code that shows what occurred error is
27
SEC-VD-DSW External Control - 0008
* Screen Mode Control
●
Function
Personal Computer changes screen mode of TV / Monitor.
Cannot control when Video Wall is on and only operates when Picture Size is Auto
Wide.
●
●
Get Screen Mode Status
Header
Command
0xAA
0x18
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
ScrMode
Set Picture Size
Header
Command
0xAA
0x18
ID
Check
Sum
ScrMode : Screen Mode Code to be set on TV / Monitor
●
0x01
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4 : 3
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x18
ScrMode
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x18
ERR
Check
Sum
ScrMode : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 28
SEC-VD-DSW External Control
* Screen Size Control
●
Function
Personal Computer recognizes the screen size of TV / Monitor.
●
●
Get Screen Size Status
Header
Command
0xAA
0x19
Header
Command
ID
Data Length
0
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x19
Screen
Size
Ack
0xAA
0xFF
ID
Check
Sum
Screen Size : Screen size of TV / Monitor (Range: 0 ~ 255, Unit: Inch)
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x19
ERR
Check
Sum
ERR : Error code that shows what occurred error is
29
SEC-VD-DSW External Control
* Red Offset Control
●
Function
Personal Computer changes R Offset from Signal Control function of TV / Monitor.
※ Signal Control R Offset Control only operates when Signal Balance is on and
current input source is PC and BNC.
●
●
Get Signal Control R Offset Status
Header
Command
0xAA
0x1A
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
R Offset
Set Signal Control R Gain
Header
Command
0xAA
0x1A
ID
Check
Sum
R Offset : R Gain value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x1A
R Offset
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x1A
ERR
Check
Sum
R Offset : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
30
SEC-VD-DSW External Control
* Green Offset Control
●
Function
Personal Computer changes G Offset from Signal Control function of TV / Monitor.
※ Signal Control G Offset Control only operates when Signal Balance is on and
current input source is PC and BNC.
●
●
Get Signal Control G Offset Status
Header
Command
0xAA
0x1B
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
G Offset
Set Signal Control G Gain
Header
Command
0xAA
0x1B
ID
Check
Sum
G Offset : G Offset value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x1B
G Offset
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x1B
ERR
Check
Sum
G Offset : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
31
SEC-VD-DSW External Control
* Blue Offset Control
●
Function
Personal Computer changes B Offset from Signal Control function of TV / Monitor.
※ Signal Control B Offset Control only operates when Signal Balance is on and
current input source is PC and BNC.
●
●
Get Signal Control B Offset Status
Header
Command
0xAA
0x1C
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
B Offset
Set Signal Control B Offset
Header
Command
0xAA
0x1C
ID
Check
Sum
B Offset : B Offset value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x1C
B Offset
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x1C
ERR
Check
Sum
B Offset : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
32
SEC-VD-DSW External Control
* Contrast Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
Personal Computer changes contrast of TV / Monitor.
●
●
Get Contrast Status
Header
Command
0xAA
0x24
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Contrast
Set Contrast
Header
Command
0xAA
0x24
ID
Check
Sum
Contrast : Contrast value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x24
Contrast
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x24
ERR
Check
Sum
Contrast : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
33
SEC-VD-DSW External Control - 0008
* Brightness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
Personal Computer changes brightness of TV / Monitor.
●
●
Get Brightness Status
Header
Command
0xAA
0x25
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Brightness
Set Brightness
Header
Command
0xAA
0x25
ID
Check
Sum
Brightness : Brightness value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x25
Brightness
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x25
ERR
Check
Sum
Brightness : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 34
SEC-VD-DSW External Control - 0008
* Sharpness Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
Personal Computer changes sharpness of TV / Monitor의.
●
●
Get Sharpness Status
Header
Command
0xAA
0x26
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Sharpness
Set Sharpness
Header
Command
0xAA
0x26
ID
Check
Sum
Sharpness : Sharpness value code to be set on TV/Monitor ( 0 ~ 100 )
Caution : Sharpness could only be set in 50 Steps (0, 2, 4, 6... 100)
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x26
Sharpness
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x26
ERR
Check
Sum
Sharpness : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 35
SEC-VD-DSW External Control - 0008
* Color Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
Personal Computer changes the color of TV / Monitor.
●
●
Get Color Status
Header
Command
0xAA
0x27
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Color
Set Color
Header
Command
0xAA
0x27
ID
Check
Sum
Color : Color value code to be set on TV/Monitor( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x27
Color
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x27
ERR
Check
Sum
Color : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 36
SEC-VD-DSW External Control - 0008
* Tint Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
Personal Computer changes tint of TV / Monitor when visual display is NTSC.
Does not operate with PAL signals.
●
●
Get Tint Status
Header
Command
0xAA
0x28
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Tint
Set Tint
Header
Command
0xAA
0x28
ID
Check
Sum
Tint : Tint value code to be set on TV/Monitor (0 ~ 100 )
R
Tint Value
G
(100 - Tint) Value
Caution : Tint could only be set in 50 Steps (0, 2, 4, 6... 100)
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x28
Tint
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x28
ERR
Check
Sum
Tint : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 37
SEC-VD-DSW External Control - 0008
* Red Gain Control (PC, BNC Only)
●
Function
Personal Computer changes Red Gain of TV / Monitor.
●
●
Get Red Gain Status
Header
Command
0xAA
0x29
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Red
Set Red Gain
Header
Command
0xAA
0x29
ID
Check
Sum
Red : Red Gain value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x29
Red
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x29
ERR
Check
Sum
Red : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 38
SEC-VD-DSW External Control - 0008
* Green Gain Control (PC, BNC Only)
●
Function
Personal Computer changes Green Gain of TV / Monitor.
●
●
Get Green Gain Status
Header
Command
0xAA
0x2A
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Green
Set Green Gain
Header
Command
0xAA
0x2A
ID
Check
Sum
Green : Green Gain value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x2A
Green
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x2A
ERR
Check
Sum
Green : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 39
SEC-VD-DSW External Control - 0008
* Blue Gain Control (PC, BNC Only)
●
Function
Personal Computer changes Blue Gain of TV / Monitor.
●
●
Get Blue Gain Status
Header
Command
0xAA
0x2B
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Blue
Set Blue Gain
Header
Command
0xAA
0x2B
ID
Check
Sum
Blue : Blue Gain value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x2B
Blue
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x2B
ERR
Check
Sum
Blue : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 40
SEC-VD-DSW External Control - 0008
* Treble Control
●
Function
Personal Computer changes Treble of TV / Monitor.
●
●
Get Treble Status
Header
Command
0xAA
0x2C
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Treble
Set Treble
Header
Command
0xAA
0x2C
ID
Check
Sum
Treble : Treble value code to be set on TV/Monitor ( 0 ~ 100 )
Caution : Treble could only be set in 40 Steps (0, 2, 5, 7... 100)
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x2C
Treble
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x2C
ERR
Check
Sum
Treble : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 41
SEC-VD-DSW External Control - 0008
* Bass Control
●
Function
Personal Computer changes Bass of TV / Monitor.
●
●
Get Bass Status
Header
Command
0xAA
0x2D
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Bass
Set Bass
Header
Command
0xAA
0x2D
ID
Check
Sum
Bass : Bass value code ( 0 ~ 100 )
Caution : Bass could only be set in 40 Steps. (0, 2, 5, 7... 100)
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x2D
Bass
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x2D
ERR
Check
Sum
Bass : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 42
SEC-VD-DSW External Control - 0008
* Balance Control
●
Function
Personal Computer changes Balance of TV / Monitor.
●
●
Get Balance Status
Header
Command
0xAA
0x2E
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Balance
Set Balance
Header
Command
0xAA
0x2E
ID
Check
Sum
Balance : Balance value code to be set on TV/Monitor ( 0 ~ 100 )
L
(100 - Balance) Value
R
Balance Value
Caution : Balance could only be set in 22 Steps. (0, 4, 9, 13... 100)
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x2E
Balance
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x2E
ERR
Check
Sum
Balance : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 43
SEC-VD-DSW External Control - 0008
* Coarse Control (PC, BNC Only)
●
Function
Personal Computer adjusts Coarse of TV / Monitor.
●
Get Coarse Status
None
●
Set Coarse
Header
Command
0xAA
0x2F
ID
Data Length
Data 1
1
Coarse
Check
Sum
Coarse : Coarse Increase/Decrease code to be set on TV/Monitor
●
1
Increase
0
Decrease
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x2F
Coarse
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x2F
ERR
Check
Sum
Coarse : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 44
SEC-VD-DSW External Control - 0008
* Fine Control (PC, BNC Only)
●
Function
Personal Computer adjusts Fine of TV / Monitor.
●
Get Fine Status
None
●
Set Fine
Header
Command
0xAA
0x30
ID
Data Length
Data 1
1
Fine
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x30
Fine
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x30
ERR
Fine : Phase Increase/Decrease code
●
1
Increase
0
Decrease
Ack
Header
Command
0xAA
0xFF
ID
Check
Sum
Fine : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 45
SEC-VD-DSW External Control - 0008
* H-Position Control (PC, BNC Only)
●
Function
Personal Computer adjusts Horizontal Position of TV / Monitor.
●
Get H-Position Status
None
●
Set H-Position
Header
Command
0xAA
0x31
ID
Data Length
Data 1
1
H-Pos
Check
Sum
H-Pos : H-Position Increase/Decrease code to be set on TV/Monitor
●
1
Move to Right
0
Move to Left
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x31
H-Pos
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x31
ERR
Check
Sum
H-Pos : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 46
SEC-VD-DSW External Control - 0008
* V-Position Control (PC, BNC Only)
●
Function
Personal Computer adjusts Vertical Position of TV/Monitor.
●
Get V-Position Status
None
●
Set V-Position
Header
Command
0xAA
0x32
ID
Data Length
Data 1
1
V-Pos
Check
Sum
V-Pos : V-Position Increase/Decrease code to be set on TV/Monitor
●
1
Move Down
0
Move Up
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x32
V-Pos
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x32
ERR
Check
Sum
V-Pos : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 47
SEC-VD-DSW External Control - 0008
* Clear Menu Control
●
Function
Personal Computer removes Menu OSD left in TV / Monitor.
●
Get Clear Menu Status
None
●
Set Clear Menu
Header
Command
0xAA
0x34
ID
Data Length
Data 1
1
Clear
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x34
Clear
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x34
ERR
Clear : 0x00 (Always)
●
●
Ack
Header
Command
0xAA
0xFF
Header
Command
0xAA
0xFF
ID
Check
Sum
Nak
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 48
SEC-VD-DSW External Control - 0008
* Remote Control
●
Function
Personal Computer enables/disables IR receiving function of TV/Monitor/
Can operate regardless of whether power is ON/OFF
●
●
Get Remote Status
Header
Command
0xAA
0x36
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
RMC
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x36
RMC
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x36
ERR
Set Remote Enable/Disable
Header
Command
0xAA
0x36
ID
RMC : Power code to be set on TV/Remocon
●
1
Remocon Enable
0
Remocon Disable
Ack
Header
Command
0xAA
0xFF
ID
Check
Sum
RMC : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 49
SEC-VD-DSW External Control - 0008
* RGB Contrast Control (PC, BNC, DVI Only)
●
Function
Personal Computer changes contrast of TV / Monitor when Input Source is PC.
●
●
Get Contrast Status
Header
Command
0xAA
0x37
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Contrast
Set Contrast
Header
Command
0xAA
0x37
ID
Check
Sum
Contrast : RGB Contrast value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x37
Contrast
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x37
ERR
Check
Sum
Contrast : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 50
SEC-VD-DSW External Control - 0008
* RGB Brightness Control (PC, BNC, DVI Only)
●
Function
Personal Computer changes Brightness when Input Source of TV / Monitor is PC.
●
●
Get Brightness Status
Header
Command
0xAA
0x38
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Brightness
Set Brightness
Header
Command
0xAA
0x38
ID
Check
Sum
Brightness : RGB Brightness value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x38
Brightness
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x38
ERR
Check
Sum
Brightness : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 51
SEC-VD-DSW External Control - 0008
* Auto Adjustment Control (PC, BNC Only)
●
Function
Personal Computer controls PC system screen automatically.
●
Get Auto Adjustment Status
None
●
Set Auto Adjustment
Header
Command
0xAA
0x3D
ID
Data Length
Data 1
1
Auto
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x3D
Auto
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x3D
ERR
Auto : 0x00 (Always)
●
●
Ack
Header
Command
0xAA
0xFF
Header
Command
0xAA
0xFF
ID
Check
Sum
Nak
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 52
SEC-VD-DSW External Control - 0008
* Color Tone Control (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
Personal Computer changes Color Tone of TV / Monitor.
●
●
Get Color Tone Status
Header
Command
0xAA
0x3E
ID
Data Length
0
Check
Sum
Set Color Tone
Header
Command
0xAA
0x3E
ID
Data Length
Data 1
1
Color Tone
Check
Sum
Color Tone : Color Tone value code to be set on TV/Monitor ( 0 ~ 4 )
●
0x00
Cool 2
0x01
Cool 1
0x02
Normal
0x03
Warm 1
0x04
Warm 2
0x50
Off
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x3E
Color Tone
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x3E
ERR
Check
Sum
Brightness : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 53
SEC-VD-DSW External Control - 0008
* Color Temperature Control
●
Function
Personal Computer changes Color Temperature value of TV / Monitor.
Only operates when Color Tone is set to Off.
●
●
Get C_Temp Status
Header
Command
0xAA
0x3F
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
C_Temp
Set Brightness
Header
Command
0xAA
0x3F
ID
Check
Sum
C_Temp : Color Temperature value code to be set on TV/Monitor ( 0 ~ 10 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x3F
C_Temp
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x3F
ERR
Check
Sum
C_Temp : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 54
SEC-VD-DSW External Control - 0008
* Pixel Shift Control
●
Function
Personal Computer controls Pixel Shift function of TV / Monitor.
Cannot control when Video Wall is on or when Zoom(0x39) is set or when Input
Signal is VESA Mode in DVI.
●
●
Get Pixel Shift Status
Header
Command
0xAA
0x4C
ID
Data Length
0
Check
Sum
Data Length
Data 1
Data 2
Data 3
Data 4
0x04
Shift
H.Dot
V.Line
S.Time
Set Pixel Shift
Header
Command
0xAA
0x4C
ID
Check
Sum
Shift : Pixel Shift On/Off Code to be set on TV/Monitor
Caution : If Shift value is off, H.Dot, V.Line, S.Time values are ignored in TV /
Monitor.
1
ON
0
OFF
H.Dot : Horizontal Dot value code set on TV/Monitor (0 ~ 4)
V.Line : Vertical Line value code set on TV/Monitor (0 ~ 4)
S.Time : Shift Time value code set on TV/Monitor (1 ~ 4)
●
Ack
Header
Command
0xAA
0xFF
Val 3
Val 4
V.Line
S.Time
ID
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x06
'A'
0x4C
Shift
H.Dot
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x4C
ERR
Check
Sum
Check
Sum
Shift, H.Dot, V.Line, S.Time : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 55
SEC-VD-DSW External Control - 0008
* Video Wall Control
●
Function
Personal Computer turns Video Wall function of TV / Monitor ON/OFF.
Does not operate in MagicNet.
●
●
Get Video Wall Status
Header
Command
0xAA
0x4F
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
V.Wall
Set Video Wall
Header
Command
0xAA
0x4F
ID
Check
Sum
V.Wall : Video Wall code set on TV/Monitor
●
Set
2 X 2
3 X 3
4 X 4
1 X 5
5 X 1
1 X 2
2 X 1
OFF
0x00
0x00
0x00
0x00
0x00
0x00
0x00
No. 1
0x11
0x21
0x31
0x41
0x51
0x61
0x71
No. 2
0x12
0x22
0x32
0x42
0x52
0x62
0x72
No. 3
0x13
0x23
0x33
0x43
0x53
No. 4
0x14
0x24
0x34
0x44
0x54
No. 5
0x25
0x35
0x45
0x55
...
...
...
No. 9
0x29
0x39
...
...
No. 16
0x40
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x4F
V.Wall
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x4F
ERR
Check
Sum
V.Wall : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 56
SEC-VD-DSW External Control - 0008
* Auto Lamp Control
●
Function
Personal Computer sets Auto Lamp Function of TV / Monitor.
When Manual Lamp Control is on, Auto Lamp Control will automatically turn off.
●
●
●
Get Auto Lamp
Header
Command
0xAA
0x57
Data Length
ID
0
Check
Sum
Data Length
Data 1
8
LMax_H
Set Auto Lamp
Header
Command
0xAA
0x57
ID
Data 5
Data 6
Data 7
Data 8
LMin_H
LMin_M
LMin_AP
LMinValue
Data 2
Data 3
Data 4
LMax_M LMax_AP LMaxValue
Check
Sum
Ack
Header
Command
0xAA
0xFF
Val 3
Val 4
ID
Val 5
LMax_AP LMaxValue LMin_H
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x0A
'A'
0x57
LMax_H
LMax_M
Val 6
Val 7
LMin_M
Val 8
LMin_AP LMinValue
Check
Sum
LMax_H : Auto Lamp Max Time Hour set on TV/Monitor (1 ~ 12)
LMax_M : Auto Lamp Max Time Minute set on TV/Monitor (0 ~ 59)
LMax_AP : Auto Lamp Max Time set on TV/Monitor AM/PM
LMaxValue : Auto Lamp Max Value set on TV/Monitor (0 ~ 100)
LMin_H : Auto Lamp Min Time Hour set on TV/Monitor (1 ~ 12)
LMin_M : Auto Lamp Min Time Minute set on TV/Monitor (0 ~ 59)
LMin_AP : Auto Lamp Min Time set on TV/Monitor AM/PM
LMinValue : Auto Lamp Min Value set on TV/Monitor (0 ~ 100)
Caution: When LMinValue is Returned to 0xFF,
Auto Lamp Control is off.
When Dynamic contrast is on, Auto Lamp Control does not operate.
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x57
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 57
SEC-VD-DSW External Control - 0008
* Manual Lamp Control
●
Function
Personal Computer sets Manual Lamp Function of TV / Monitor.
When Auto Lamp Control is on, Manual Lamp Control will automatically turn off.
●
●
Get Manual Lamp Status
Header
Command
0xAA
0x58
ID
Data Length
0
Check
Sum
Set Manual Lamp
Header
Command
0xAA
0x58
ID
Data Length
Data 1
1
LampValue
Check
Sum
LampValue : Manual Lamp value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x58
LampValue
Check
Sum
LampValue : Same as above
Caution : When LampValue is Returned to 0xFF, Manual Lamp Control is off.
When Dynamic contrast is on, Manual Lamp Control does not operate.
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x58
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 58
SEC-VD-DSW External Control - 0008
* Safety Screen Run Control
●
Function
Personal Computer will make Safety Screen function to operate immediately, not by
Timer operation.
●
●
Get Safety Screen Run Status
Header
Command
0xAA
0x59
ID
Data Length
0
Check
Sum
Set Safety Screen Run
Header
Command
0xAA
0x59
ID
Data Length
Data 1
1
Safety
Screen
Type
Check
Sum
Safety Screen Type : Safety Screen Type to be set on TV/Monitor (1~6)
●
0
Off
1
Signal Pattern
2
All White
3
Scroll
4
Bar
6
Eraser
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x59
Safety
Screen
Type
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x59
ERR
Check
Sum
Safety Screen Type : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 59
SEC-VD-DSW External Control - 0008
* SBP Timer Control (TV)
●
Function
Personal Computer sets Screen Burn Protection Timer of TV/Monitor.
●
●
Get SBP Timer Status
Header
Command
0xAA
0x5B
ID
Data Length
0
Check
Sum
Data Length
Data 1
Data 2
Data 3
3
Timer
T.Period
T.Time
Set SBP Timer
Header
Command
0xAA
0x5B
ID
Check
Sum
Timer : SBP Timer code to be set on TV/Monitor
0
OFF
1
Pattern
2
All White
3
Inverse
4
Bar
5
Bar & Inverse
T.Period : SBP Timer Period value code to be set on TV/Monitor (1~24 Hr.)
T.Time : SBP Timer Time value code set on TV/Monitor (1~30 min.)
●
Ack
Header
Command
0xAA
0xFF
Val 3
Check
Sum
T.Time
ID
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
5
'A'
0x5B
Timer
T.Period
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x5B
ERR
Check
Sum
Timer, T.Period, T.Time : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 60
SEC-VD-DSW External Control - 0008
* Video Wall Mode Control
●
Function
Personal Computer converts Video Wall Mode of TV / Monitor when Video Wall is
ON.
Only works with TV/Monitor where Video Wall is on.
Does not operate in MagicNet.
●
●
Get Video Wall Mode
Header
Command
0xAA
0x5C
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
WallMode
Set Video Wall Mode
Header
Command
0xAA
0x5C
ID
Check
Sum
WallMode : Video Wall Mode code to be set on TV/Monitor
●
1
Full
0
Natural
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x5C
WallMode
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x5C
ERR
Check
Sum
WallMode : same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 61
SEC-VD-DSW External Control
* Safety Lock
●
Function
Personal Computer turns Safety Lock function of TV/Monitor On/Off.
전원 On/Off 여부와 상관없이 동작할 수 있다.
●
●
Get Safety Lock Status
Header
Command
0xAA
0x5D
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
Lock
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x5D
Lock
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x5D
Lock
Set Safety Lock Enable/Disable
Header
Command
0xAA
0x5D
ID
Lock : Lock code to be set on TV/Monitor
●
1
On
0
Off
Ack
Header
Command
0xAA
0xFF
ID
Check
Sum
Lock : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
62
SEC-VD-DSW External Control - 0008
* Panel Lock
●
Function
Personal Computer turns Panel function Key Lock of TV/Monitor On/OFF.
Can operate regardless of whether power is on/off.
●
●
Get Panel Lock Status
Header
Command
0xAA
0x5F
ID
Data Length
0
Check
Sum
Set Panel Lock
Header
Command
0xAA
0x5F
ID
Data Length
Data 1
1
Panel Lock
Check
Sum
Panel Lock : Panel Key Lock On/Off code to be set on TV/Monitor
●
1
Lock
0
Unlock
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x5F
Panel Lock
Check
Sum
Panel Lock : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x5F
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 63
SEC-VD-DSW External Control - 0008
* OSD On/Off
●
Function
Personal Computer turns OSD of TV / Monitor On/Off.
When OSD is on, OSD will be shown on screen
When OSD is off, OSD will not shown on screen at all
●
●
Get OSD Enable Status
Header
Command
0xAA
0x70
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
OSD
Set OSD Enable/Disable
Header
Command
0xAA
0x70
ID
Check
Sum
OSD : OSD On/Off code to be set on TV/Monitor
●
1
OSD On
0
OSD Off
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x70
OSD
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x70
ERR
Check
Sum
OSD : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 64
SEC-VD-DSW External Control - 0008
* P.Mode Control
●
Function
Personal Computer changes Picture Mode of TV / Monitor.
●
●
Get PMode Status
Header
Command
0xAA
0x71
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
PMode
Set PMode
Header
Command
0xAA
0x71
ID
Check
Sum
PMode : Picture Mode code to be set on TV/Monitor
Source
Data
Mode
AV
S-Video
Component
HDCP
( TV )
0x00
Dynamic
0x01
Standard
0x02
Movie
0x03
Custom
0x50
Off
PC
0x10
Entertain
0x11
Internet
0x12
Text
0x13
Custom
0x50
Off
BNC
DVI
( MagicNet )
Caution : Dynamic Contrast will not operate in any other mode except Off mode.
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x71
PMode
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x71
ERR
Check
Sum
PMode : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 65
SEC-VD-DSW External Control
* S.Mode Control
●
Function
Personal Computer changes Sound Mode of TV / Monitor.
●
●
Get SMode Status
Header
Command
0xAA
0x72
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
SMode
Set SMode
Header
Command
0xAA
0x72
ID
Check
Sum
SMode : Sound Mode code to be set on TV/Monitor
●
Data
Mode
0x00
Standard
0x01
Music
0x02
Movie
0x03
Speech
0x04
Custom
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x72
SMode
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x72
ERR
Check
Sum
SMode : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
66
SEC-VD-DSW External Control
* NR Mode Set (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
Personal Computer changes Digital NR mode.
●
●
Get NR Mode Status
Header
Command
0xAA
0x73
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
NR Mode
Set NR Mode
Header
Command
0xAA
0x73
ID
Check
Sum
NR Mode : NR Mode On/Off code to be set on TV/Monitor
●
1
NR Mode On
0
NR Mode Off
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x73
NR Mode
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x73
ERR
Check
Sum
NR Mode : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
67
SEC-VD-DSW External Control - 0008
* PC Color Tone Control (PC, BNC, DVI Only)
●
Function
Personal Computer can change color tone of Monitor.
●
●
Get Color Tone Status
Header
Command
0xAA
0x75
ID
Data Length
Check
Sum
0
Set Color Tone
Header
Command
0xAA
0x75
ID
Data Length
Data 1
1
Color Tone
Check
Sum
Color Tone : Color Tone value code to set on TV/Monitor (0 ~ 3)
Source
●
Data
Mode
0x00
Custom
PC
DVI
0x01
Cool
0x02
Normal
BNC
0x03
Warm
0x50
Off
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x75
Color Tone
Check
Sum
Color Tone : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x75
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 68
SEC-VD-DSW External Control - 0008
* Auto AutoAdjustment
●
Function
Personal Computer can Enable/Disable Auto Adjustment function.
On 되었을 경우에만 Auto Auto Adjustment 기능이 동작된다.
●
●
Get A.Adjustment Status
Header
Command
0xAA
0x76
Data Length
ID
0
Check
Sum
Set A.Adjustment
Header
Command
0xAA
0x76
ID
Data Length
Data 1
1
A.Adjustment
Check
Sum
A.Adjustment : Auto Auto Adjustment Value Code to be set on TV/Monitor
●
1
Enable
0
Disable
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x76
A.Adjustment
Check
Sum
A.Adjustment : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x76
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 69
SEC-VD-DSW External Control - 0008
* All Keys Lock
●
Function
Personal Computer turns both REMOCON and Panel Key Lock function on/off.
Can operate regardless of whether power is on/off.
●
●
Get All Key Status
Header
Command
0xAA
0x77
ID
Data Length
0
Check
Sum
Set All Key Lock/Unlock
Header
Command
0xAA
0x77
ID
Data Length
Data 1
1
All Key
Check
Sum
All Key : Lock On/Off code of every Key to be set on TV/Monitor
●
1
Lock
0
Unlock
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x77
All Key
Check
Sum
All Key : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x77
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 70
SEC-VD-DSW External Control - 0008
* SRS TS XT Control
●
Function
Personal Computer turns SRS TS XT of TV / Monitor on/off.
Can only operate with TV/Monitor that has SRS TS XT function.
●
●
Get SRS TS XT Status
Header
Command
0xAA
0x78
ID
Data Length
0
Check
Sum
Set SRS TSXT
Header
Command
0xAA
0x78
ID
Data Length
Data 1
1
SRS
Check Sum
SRS : SRS TS XT code to be set on TV/Monitor
●
1
SRS ON
0
SRS OFF
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x78
SRS
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x78
ERR
Check
Sum
SRS : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 71
SEC-VD-DSW External Control - 0008
* Film Mode Control
●
Function
Personal Computer turns Film Mode of TV / Monitor on/off.
●
●
Get Film Mode Status
Header
Command
0xAA
0x79
ID
Data Length
0
Check
Sum
Set Film Mode
Header
Command
0xAA
0x79
ID
Data Length
Data 1
1
FMode
Check Sum
FMode : Film Mode code to be set on TV/Monitor
●
1
Film Mode ON
0
Film Mode OFF
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x79
FMode
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x79
ERR
Check
Sum
FMode : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 72
SEC-VD-DSW External Control - 0008
* Signal Balance ( PC, BNC Only)
●
Function
Personal Computer turns Signal Balance of TV / Monitor ON/OFF.
●
●
Get Signal Balance Status
Header
Command
0xAA
0x7A
ID
Data Length
0
Check
Sum
Set Signal Balance
Header
Command
0xAA
0x7A
ID
Data Length
Data 1
1
SBalance
Check Sum
SBalance : Signal Balance code to be set on TV/Monitor
●
1
Signal Balance ON
0
Signal Balance OFF
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x7A
SBalance
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x7A
ERR
Check
Sum
SBalance : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 73
SEC-VD-DSW External Control - 0008
* SB Gain ( PC, BNC Only)
●
Function
Personal Computer changes Gain value of Monitor Signal Balance.
●
●
Get SBGain Status
Header
Command
0xAA
0x7E
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
SBGain
Set SBGain
Header
Command
0xAA
0x7E
ID
Check
Sum
SBGain : Phase B value code of Signal Balance to be set on Monitor ( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x7E
SBGain
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x7E
ERR
Check
Sum
SBGain : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 74
SEC-VD-DSW External Control - 0008
* SB Sharpness ( PC, BNC Only)
●
Function
Personal Computer changes Sharpness value of Monitor Signal Balance.
●
●
Get SBSharpness Status
Header
Command
0xAA
0x7F
ID
Data Length
0
Check
Sum
Set SBSharpness
Header
Command
0xAA
0x7F
ID
Data Length
Data 1
1
SBSharpness
Check
Sum
SBSharpness : Signal Balance Sharpness value code to be set on Monitor ( 0 ~ 100 )
●
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x7F
SBSharpness
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x7F
ERR
Check
Sum
SBSharpness : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 75
SEC-VD-DSW External Control - 0008
* Panel On Time
●
Function
Personal Computer shows Panel On Time of TV / Monitor.
●
●
Get Panel On Time Status
Header
Command
0xAA
0x83
Header
Command
0xAA
0xFF
ID
Data Length
0
Check
Sum
Data Length
Ack/Nak
r-CMD
Val 1
Val 2
0x05
'A'
0x83
PTime_ H
PTime_L
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x83
ERR
Ack
ID
Check
Sum
PTime_H : Panel On Time High.
PTime_L : Panel On Time Low.
●
Nak
Header
Command
0xAA
0xFF
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 76
SEC-VD-DSW External Control - 0008
* Video Wall On
●
Function
Personal Computer turns Video Wall of TV / Monitor ON/OFF.
Does not operate in MagicNet.
●
●
Get Video Wall On/Off Status
Header
Command
0xAA
0x84
ID
Data Length
0
Check
Sum
Set Video Wall On/Off
Header
Command
0xAA
0x84
ID
Data Length
Data 1
1
V.Wall_On
Check Sum
V.Wall_On : Video Wall Code to set on TV / Monitor
●
1
Video Wall ON
0
Video Wall OFF
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x84
V.Wall_On
Check
Sum
V.Wall_On : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x84
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 77
SEC-VD-DSW External Control - 0008
* Temperature Control
●
Function
Personal Computer sets the maximum value of TV / Monitor temperature.
Only supports models with Temperature notification function.
●
●
Get Temperature Status
Header
Command
0xAA
0x85
ID
Data Length
0
Check
Sum
Set Temperature Status
Header
Command
0xAA
0x85
ID
Data Length
Data 1
1
Temperature
Check Sum
Temperature : Temperature code to be set on TV/Monitor
Data
●
45 ~ 125(℃)
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x85
Temperature
Check
Sum
Temperature : Same as above
●
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x85
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 78
SEC-VD-DSW External Control - 0008
* Brightness Sensor
●
Function
Personal Computer turns Brightness Sensor of TV / Monitor on/off.
Only supports models with Brightness Sensor.
●
●
Get Brightness Sensor ON/OFF Status
Header
Command
0xAA
0x86
ID
Data Length
0
Check
Sum
Set Brightness Sensor ON/OFF
Header
Command
0xAA
0x86
ID
Data Length
Data 1
1
BR_Sensor
Check
Sum
BR_Sensor : Power code to be set on TV/Monitor
●
●
1
Brightness Sensor ON
0
Brightness Sensor OFF
Ack
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x86
BR_Sensor
Check
Sum
Nak
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x86
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 79
SEC-VD-DSW External Control - 0008
* Dynamic Contrast (ATV, DTV, AV, S-Video, Component, HDMI Only)
●
Function
Personal Computer turns Dynamic Contrast of TV / Monitor on/off.
Does not operate in PC, DVI and MagicNet.
●
●
Get Dynamic Contrast ON/OFF Status
Header
Command
0xAA
0x87
ID
Data Length
0
Check
Sum
Data Length
Data 1
1
DY_Cont
Set Dynamic Contrast ON/OFF
Header
Command
0xAA
0x87
ID
Check
Sum
DY_Cont : Power code to be set on TV/Monitor
●
●
1
Dynamic Contrast ON
0
Dynamic Contrast OFF
Ack
Header
Command
0xAA
0xFF
Header
Command
0xAA
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'A'
0x87
DY_Cont
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x87
ERR
Check
Sum
Nak
ID
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 80
SEC-VD-DSW External Control - 0008
* Video Wall User Control
●
Function
Personal Computer turns Video Wall function of TV / Monitor on/off.
Does not operate in MagicNet.
●
●
Get Video Wall Status
Header
Command
0xAA
0x89
Data Length
ID
0
Check
Sum
Set Video Wall
Header Command
0xAA
0x89
ID
Data Length
Data 1
Data 2
2
Wall_Div
Wall_SNo
Check
Sum
Wall_Div : Video Wall Divider code set on TV/Monitor
H
V
1
2
3
4
5
OFF
0x00
0x00
0x00
0x00
0x00
1
0x11
0x12
0x13
0x14
0x15
2
0x21
0x22
0x23
0x24
0x25
3
0x31
0x32
0x33
0x34
0x35
4
0x41
0x42
0x43
0x44
0x45
5
0x51
0x52
0x53
0x54
0x55
Wall_SNo : TV/Monitor Number code set on TV/Monitor
●
Set Number
Data
1
0x01
2
0x02
...
...
24
0x18
25
0x19
Ack
Header Command
0xAA
●
0xFF
ID
Data Length
Ack/Nak
r-CMD
4
'A'
0x89
Val 1
Val 2
Wall_Div Wall_SNo
Check
Sum
Nak
Header
0xAA
Command
0xFF
ID
Data Length
Ack/Nak
r-CMD
Val 1
3
'N'
0x89
ERR
Check
Sum
ERR : Error code that shows what occurred error is
Display S/W, VD Business Team, Samsung Electronics 81
SEC-VD-DSW External Control - 0008
* Model Name Control
●
Function
Personal Computer grasps TV / Monitor Model Name and display.
●
●
Get Model Number Status
Header
Command
0xAA
0x8A
Data Length
ID
0
Check S
um
Ack
Header
Command
0xAA
0xFF
Val 3
Val 4
ID
Val 5
Data Length Ack/Nak r-CMD
0x12
Val 6
'A'
Val 1
0x8A
Val 7
Val 2
M_Name1 M_Name2
Val 8
Val 9
Val 10
M_Name3 M_Name4 M_Name5 M_Name6 M_Name7 M_Name8 M_Name9 M_Name10
Val 11
Val 12
Val 13
Val 14
Val 15
Val 16
M_Name11
M_Name12
M_Name13
M_Name14
M_Name15
M_Name16
Check
Sum
M_Name1 ~ M_Name16 : TV / Monitor의 Model Name
M_Name1
'S'
M_Name2
'y'
M_Name3
'n'
M_Name4
'c'
M_Name5
'M'
M_Name6
'a'
M_Name7
's'
M_Name8
't'
M_Name9
'e'
M_Name10
'r'
M_Name11
'4'
M_Name12
'0'
M_Name13
'0'
M_Name14
'D'
M_Name15
'X'
M_Name16
'n'
Display S/W, VD Business Team, Samsung Electronics 82
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement