Electronic Pressure Regulator

Electronic Pressure Regulator
ELECTRONIC PRESSURE REGULATOR
Optional light tower
or light bar
Conveniently located
rotary control switch or
Sequential Loop Switch
with push button control
Recommended return
to tank line
Electronic relief valve
moveable to most easily
mounted location
Cab mounted pressure
indicator light box
An easy, ergonomic way to
change relief settings.
APPLICATIONS
Ergonomic
solution for
ease of
driver operation.
Multi-setting Relief Valves are popular options for controlling
hydraulic clamping pressure in roll clamp and carton clamp
applications. This three pressure setting system is used for
controlling clamp force in roll clamp and carton clamp applications
when multiple settings are required to prevent overclamping.
FEATURES
■
Three adjustable relief settings plus truck relief. System can
be configured during installation to exclude truck relief.
■
Ergonomically located control switch.
■
A small in-cab light bar to show the driver which relief
setting is active. Lights are bright and visible from 40 feet.
The electronic pressure regulator system offers a solution to
the ergonomics of switch location.
■
Optional light tower or light bar that's visible from a long
range showing which relief setting is active.
BENEFITS
■
All necessary electrical wiring and circuit protection fuse.
■
The valve bank can be located closest to the hydraulic
components of the lift truck, allowing ease of installation.
■
Maximum operator convenience! The rotary switch can be
located near the driver in a convenient location or place the
sequential loop button in any location to allow the driver to
sequence through 3 pressure settings. This will allow the
driver to stay in the drive position when changing a pressure
setting rather than bending forward to switch the pressure
with the mechanical handle. No aggravation to the back,
which will encourage the driver to use the relief system.
■
Driver will always know which relief setting is active with the
in-cab light box.
■
Optional light tower or light bar can be mounted in best
location for supervisor observation.
OPTIONS
The Electronic Pressure Regulator System is available with the
following packages in either 12 volt or 24-48 volt:
■
Without Light Tower or Light Bar
■
With Light Tower only
■
With Horizontal Light Bar only
■
With Rotary or Sequencial Loop push button switching
system
ELECTRONIC PRESSURE REGULATOR
INCLUDED WITH THE ELECTRONIC PRESSURE REGULATOR SYSTEM
Valve Assembly
Wiring and Circuit Protection Fuse
Solenoid-operated valve assembly with
three independent and user definable
pressure settings.
All necessary electrical wiring and circuit
protection fuse.
Control Switches/Options
In-Cab Light Bar
Rotary Control Switch to select pressure
setting.
Sequential loop with push button switching
allows the driver to push a button mounted
on or near the auxiliary handle. Each time
the button is pushed the next pressure
setting is activated. Keep pressing the
button and the system loops back to the
original setting.
Small in-cab light bar to show the driver
which setting is active
Tank
RECOMMENDED ACCESSORIES AND OPTIONS
Truck
Optional Light Tower Cable
T 1
Extension for use where the light will be
located in a position that will require more
than 90" of cable. Extension adds 72"
length.
Part No. 6059146
P
2
3
Attachment
Dimensional Detail
5.7"
146mm
9.1"
232mm
Optional Light Tower or Bar
Pressure Indicator Lights, visible from a long
range, correspond to the pressure setting
that is active.
15.7"
400mm
1.5"
38mm
15"
381mm
3"
75mm
5.1"
130mm
2"
51mm
5.1"
130mm
2.2"
57mm
Pressure Gauge Kit
High quality, 0-5,000 psi, glycerin filled gauge
plus adapter fittings. This kit is recommended
for setting pressure of each relief cartridge.
Kit Part No. 671212
Pressure Gauge only, Part No. 664158
4.5"
115mm
2.6"
65mm
2.8"
73mm
1"
25mm
1.8"
46mm
4.9"
124mm
Universal Low Pressure
Tank Line Kit
Low Pressure Tank Line Kit
Includes hose and hardware necessary to
install a hydraulic line directly into an
existing low pressure tank line hose.
The use of low pressure tank line kits is required
for optimal performance and system accuracy.
Includes 1/2" hoses, fittings and diffuser to
install low pressure tank line kit directly to
the top of the hydraulic tank cover. This does
not require cutting into the hydraulic return
line, and provides excellent efficiency.
Cascade Corporation • PO Box 20187 • Portland, OR 97294-0187 • USA • 800 CASCADE (227.2233) • Tel 503.669.6257 • Fax 800.693.3768 • Fax 503.669.6367
Cascade Canada Ltd. • 5570 Timberlea Blvd. • Mississauga, Ontario L4W 4M6 • Canada • 800.380.2272 • Tel 905.629.7777 • Fax 905.629.7785
Cascade is a registered trademark of Cascade Corporation.
© Cascade Corporation 2009. All rights reserved.
Form 6055692 CG 5M 02/09
www.cascorp.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement