9100 Rev-2-14

9100 Rev-2-14
9 1 0 0 V E HI C U L A R
• Residential • COMMERCIAL
• Electronic magnetic limits eliminate old
style mechanical switches that can wear
out, break or fail
• Automatic self-setting limits mean no
limit switch adjustments – ever
• Safety – built-in mechanical and
electronic reverse system
• Advanced microprocessor control board
features programming switches to set
the mode of operation required and has
ports for DKS plug-in loop detectors to
simplify wiring
• 5-year limited warranty
entrapment detection
reverses gate when obstructed
built in
power switch and reset switch
fail-safe release
never be locked out (or in)
unique design
allows easy access to all mechanical parts
Access Control Solutions
9100 1/2 HP
12” W x 24” H x 11.5” D
(30.5cm W x 61cm H x 29.2cm D)
1/2 HP
Class of
Max Gate Max Gate MOTOR Input
operationLength *
Weight *
30 Ft 1000 Lbs. 1/2HP
(9.1 m)
(453.5 kg)
Continuous Duty
115 VAC, 60 Hz, 5.4A
AC Motor
* A ssumes gate is on level ground, in good condition with properly adjusted hardware.
Other external factors may affect the performance of the gate operator.
Technical Features
Frame: G90 Galvanized steel to prevent rusting
Automatic limit adjustment
Environmental: 10ºF to 140ºF (-12°C to 62°C)
Cover: Steel cover is plated and painted
Auto-close timer 1-23 sec
Primary Reduction: Single cog belt
Selectable stop / reverse loop function
Thermostatically controlled heater kit recommended
for colder environments
Speed: Approximately 10 in/sec (254 mm/sec)
Built in On / Off switch
External entrapment/obstruction sensing devices are
required with this operator
Chain: Unit is shipped with 20-ft (6m) of #40 roller
chain, chain brackets, hardware
Built in alarm reset switch
Shipping weight approximately 125-185 Lbs (67.7-83.9 kg)
Fail-Safe release standard
Programming switches allow you to set desired
mode of operation
Partial-open and anti-tailgating features
Nickel or stainless steel chain
Base Plate for post mounting
Fail-Secure release kit
Two 115 VAC convenience outlets for accessory
Automatically assumes fail-safe mode when an
entrapment condition exists
Ports for plug-in open and reverse loop detectors.
DKS plug-in detectors only
Gate Tracker reporting output provides operator data to
access control system (DKS 1833, 1835, 1837, 1838 only)
Distributed by:
Access Control Solutions since 1948
120 Glasgow Avenue, Inglewood, California 90301 U.S.A.
Tel: 310-645-0023 FAX: 310-641-1586 www.doorking.com
© 2014 All Rights Reserved. Product specifications may change without notice.
Rev. 2/14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF