Voltek B&W Bullet Camera Kit EBB1KIT, EBH1033KIT, EBD1050KIT, Colour Bullet Camera Kit ECB3KIT, ECH3033KIT, ECD3050KIT security camera Instruction manual

Accessories For Your Camera
I N S TAL LAT I O N
CT200 4 Way Camera Switcher
CT210 Wide Band TV Modulator
CT230 Time & Date Generator
CT250 15 Metre Extension Lead
EBB1KIT
B&W Bullet Camera Kit
For any further information on Voltek camera products or accessories please
contact Voltek sales line.
SPECIFICATIONS
170 º B&W Bullet Camera Kit
EBD1050KIT
Camera
Operating Voltage
Current Consumption
Camera Type
Horizontal Resolution
Lens
Viewing Angle
Minimum Illumination
Video Signal Output
Operating Temperature
Weatherproofing
Power Supply
Input Voltage
Output Voltage
Output Current
Weatherproofing
11- 13V dc
100 mA Max
B&W 1/3” CCD, Colour 1/4 “ CCD
B&W 380 TV lines, Col 330 TV Lines
3.6mm
B&W 90º, Colour 78º
B&W 0.1 Lux, Colour 2 Lux
B&W -CCIR, Colour - PAL
-10ºC to +40ºC
Bullet Camera IP65
Mini Dome IP30 (Indoor Use only)
220/240V ac 50/60Hz
12V dc
300mA (max)
IP30 (Indoor use only)
Cable Type
4 core alarm cable
Camera Lead
EBH1033KIT
B&W Mini Dome Camera Kit
ECB3KIT
Colour Bullet Camera Kit
ECH3033KIT
170 º Colour Bullet Camera Kit
ECD3050KIT
Colour Mini Dome Camera Kit
Thank you for purchasing the Bullet / Mini Dome Camera Kit. Please study these
instructions carefully before attempting to operate the unit.
The camera kit will connect to any Monitor, Television, DVR or Video Recorder that
has a Scart, Phono or BNC socket. The camera gives high high quality pictures
allowing you to watch the desired area such as the drive way, garden, baby room,
office etc.
WARRANTY
This product has a twelve month manufacturers parts and labour warranty. In the
unlikely event that you encounter a problem with this product, please telephone
the Voltek helpline on 09066 191 133*. Should the problem not be able to be
resolved over the telephone it should be returned to the place of purchase or direct
to Voltek.
PRODUCT FEATURES
„ Simple plug-&-go connections for a fast and simple installation.
„ Full pan and tilt adjustment so that you can watch your desired area
easily.
„ Easily connected into and aerial distribution system using the CT210
UHF modulater, allowing you to see the camera picture on any television
throughout the property.
39c Churchill Way, Lomeshaye Ind. Est.. Nelson, Lancashire. BB9 6RT. England
Tel: (01282) 695500 Fax: (01282) 695511 Helpline 09066 191 133*
Email [email protected] Website www.voltek.co.uk
*Helpline call cost 60p/minute. Open 9am to 5pm, Mon to Fri.
Voltek reserves the right to change any product or specification without notice
(c) 2001 Voltek Automation Ltd. Issue 2
Page 4
INSTRUCTIONS
Page 1
To view the camera picture;
1. Switch on the TV, VCR and power to the camera.
2. Select the VCR channel on your TV ( the channel you normally use for watching
video tapes).
3. Select the AV input on your VCR to view the camera picture. Note some models of
VCR use channel 0 for the AV input. See the VCR instructructions for further details.
PACKAGE CONTENTS
Please check all the parts before proceeding with the installation.
Mini Dome or Bullet
CONNECTION METHOD 2
Camera with
2metre lead
Camera with
18 metre
30CM Phono lead Phono lead
12V Power
Supply
Scart
Connector
BNC
Connector
Monitor
Yellow
Fixing Kit
Black
White
Not Connected
BNC Video
Socket
BNC
Connector
INSTALLING THE CAMERA
For use with Volek
Accessories
Before you install the camera and cables, we recommend that you temporarily
connect the camera to your Monitor/TV (television) or VCR (video cassette
recorder) to help determine the best position for the camera.
The camera will connect to a spare Scart socket or phono socket on your TV or
VCR.
If you do not have any spare sockets, you will need to purchase either a AV
Switcher; or a CT210 Channel Convertor available from all good audio/video
retailers. Please see the instructions supplied with the switcher / modulator for
details on how to connect the camera.
•The camera must be postioned so that it will not point directly into the sun (sunrise
and sunset) or any bright light.or any very bright light. This may cause damage to the
camera.
•The camera must be positioned so that it will no point directly into the sun (sunrise or
with the camera pointing downwards.
TV
Yellow
Black
VCR
For use with Volek
Accessories
White
Yellow
dark, such as in the shadow of a building. All types of cameras have difficulty in
‘seeing’ with such a large lux level variation.
• Ensure a light is fitted near to the camera for night-time operation.
• The camera cable supplied may be extended up to approximately 100 metres.
When laying the cable, please bear in mind the following points.
Scart Socket
Scart
Connector
Page 2
POSITIONING THE CAMERA
The camera is suitable for indoor or outdoor use. Please bear in mind the
following points when choosing a mounting position.
• Avoid viewing areas where half the area is in bright sunlight and the other half is
Aerial
18 metre
Phono lead
White
• The best viewing angle is achieved when mounted at approx 3 to 4 metres high,
CONNECTION METHOD 1
White
Not Connected
Not
Connected
Yellow
sunset) or any bright light. This may cause damage to the camera
There are two main ways in which the ColourCam may be connected to your
TV / VCR. See the methods below and choose the method most suitable for
your installation.
Camera with
2metre lead
18 metre
Phono lead
12V Power
Supply
12V Power
Supply
„ Keep the cable away from other cables where possible to reduce the risk of
„
picture and audio interference.
Avoid laying the cable next to anything which runs hot which could burn the
cable. If the cable is run along the ground, a protective covering must be used to
prevent damage to the cable.
Page 3