Foot Control (002-0675-0x)

Foot Control (002-0675-0x)
Print on Plain White Paper (Part No. 122919)
FOOTCONTROL
CONTROL
FOOT
Foot Control Installation Guide
(3) Remove three screws (2) and hydraulic cover (3).
FOOT CONTROL INSTALLATION
(4) Route foot control cord (4) under back of chair; then
secure restraint bracket (5) to chair base using
screw (6).
(1) Depress BASE UP button (A, Figure 1) on touch
pad (1) [located on side of chair] to raise chair as
high as it will go.
(5) Plug foot control cord (4) into J1 connector (B) on
PC board (7).
WARNING!
Always disconnect power cord before
removing shrouds or covers. Failure to
comply could result in serious personal injury or
death.
(6) Plug power cord into outlet and check for proper
operation.
(7) Replace hydraulic cover (3) and secure with three
screws (2).
(2) Unplug power cord from outlet.
Figure 1. Foot Control Installation
© Midmark Corporation 2000
Style A
1
003-1173-00 Rev. A (11/00)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement