Extron CIA111F8 Specification

Specifications — CIA111 Series, CIA114 Series

Video

Gain ............................................... Unity

Bandwidth .................................... 250 MHz (-3 dB)

Video input and loop-through

Number/signal type ................... 1 VGA–UXGA, Mac, Sun RGBHV, RGBS, RGsB

1 buffered local monitor loop-through identical to the input

Sync is not stripped from green. RGsB input signals are output as RGsB.

Connectors .................................... 2 female 15-pin HD

Nominal level ............................... 0.7 Vp-p for RGB

Minimum/maximum levels ...... Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain

Impedance .................................... 75 ohms

Horizontal frequency .................. 30 kHz to 130 kHz

Vertical frequency ....................... 30 Hz to 120 Hz

Return loss .................................... <-50 dB @ 5 MHz

Video output

Number/signal type ................... 1 RGBHV, RGBS, RGsB

Connectors .................................... 5 BNC female on 4" (10.2 cm) pigtails

Nominal level ............................... 0.7 Vp-p for RGB

Minimum/maximum levels ...... Analog: 0.3 V to 1.5 Vp-p

Impedance .................................... 75 ohms

Return loss .................................... <-50 dB @ 5 MHz

Sync

Input type ..................................... RGBHV, RGBS, RGsB

Output type .................................. RGBHV, RGBS, RGsB

Input level ..................................... 2.0 V to 5.0 Vp-p

Output level .................................. TTL: 5.0 Vp-p, unterminated

Input impedance .......................... 510 ohms

Output impedance ...................... 75 ohms

Max. propagation delay .............. 1.2 µs

Polarity .......................................... Positive or negative (follows input)

Audio

Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response ..................... 20 Hz to 20 kHz, ±0.4 dB

THD + Noise ................................ 0.03% @ 1 kHz at nominal level, 0.1% @ 20 kHz at maximum output

S/N ............................................... >75 dB at maximum output

Stereo channel separation .......... >-113 dB @ 1 kHz to 20 kHz

Audio input

Number/signal type ................... 1 stereo, unbalanced

Connectors .................................... (1) 3.5 mm mini stereo jack

Impedance .................................... >10k ohms unbalanced

Nominal level ............................... -10 dBV (316 mV)

Maximum level ............................ +8.1 dBu, (balanced or unbalanced) at 1%THD+N

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

1-2 CIA111, CIA111AM, CIA114, CIA114F5, CIA114AM Architectural Interface • Specifications

Audio output

Number/signal type ................... 1 stereo, balanced/unbalanced

Connectors .................................... 1 direct insertion captive screw connector, 5 pole

Impedance .................................... 50 ohms unbalanced, 100 ohms balanced

Gain error ...................................... ±0.09 dB channel to channel

Maximum level (Hi-Z) ................ >+15 dBu, balanced or unbalanced at 1%THD+N

Maximum level (600 ohm) ......... >+13 dBm, balanced or unbalanced at 1%THD+N

General

External power supply ............... 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 9 VDC, 0.6 A, regulated

Power input requirements ......... 9 VDC, 0.5 A

Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Rack mount

CIA111, CIA114 ............... No, but wall or furniture mountable

CIA111AM ........................ No, but Ackerman ® GB3 floor box mountable

CIA114F5 ........................... No, but Steel City ® 665 floor box mountable

CIA114AM ........................ No, but Ackerman ® GB2 floor box mountable

Enclosure type .............................. Metal

Enclosure dimensions

CIA111 faceplate .............. 4.5" H x 5.0" W x 0.1" D (11.4 cm H x 12.7 cm W x 0.2 cm D) (2 gang)

CIA114 faceplate .............. 4.5" H x 2.75" W x 0.1" D (11.4 cm H x 7.0 cm W x 0.2 cm D) (1 gang)

CIA111AM faceplate ....... 2.75" H x 7.9" W x 1.25" D (7.0 cm H x 20.1 cm W x 3.2 cm D)

CIA114F5 faceplate .......... 2.1" H x 5.75" W x 1.0" D (5.3 cm H x 14.6 cm W x 2.5 cm D)

CIA114AM faceplate ....... 2.75" H x 6.2" W x 1.25" D (7.0 cm H x 15.7 cm W x 3.2 cm D)

Device ................................ 2.8" H x 1.9" W x 1.5" D (7.1 cm H x 4.8 cm W x 3.8 cm D)

(Depth excludes connectors.)

Product weight ............................. 0.7 lbs (0.3 kg)

Shipping weight ........................... 3 lbs (2 kg)

Vibration ....................................... ISTA 1A in carton (International Safe Transit Association)

Listings .......................................... ETL (UL1950)

Compliances ................................. CE

MTBF ............................................. 30,000 hours

Warranty ....................................... 3 years parts and labor

All nominal levels are at ±10%.

Specifications are subject to change without notice.

(7.51-041105-D4)

CIA111, CIA111AM, CIA114, CIA114F5, CIA114AM Architectural Interface • Specifications 1-3