BLF2425M7LS250P,11 datasheet

BLF2425M7LS250P,11 datasheet
BLF2425M7L250P;
BLF2425M7LS250P
Power LDMOS transistor
Rev. 5 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
250 W LDMOS power transistor for Industrial, Scientific and Medical (ISM) applications at
frequencies from 2400 MHz to 2500 MHz.
The BLF2425M7L250P and BLF2425M7LS250P are designed for high-power CW
applications and are assembled in high performance ceramic packages, available in
eared and earless versions
Table 1.
Typical performance
RF performance at Tcase = 25 C in a common source class-AB production test circuit.
Test signal
CW
f
VDS
PL(AV)
Gp
D
(MHz)
(V)
(W)
(dB)
(%)
2450
28
250
15
51
1.2 Features and benefits








High efficiency
Easy power control
Excellent ruggedness
Excellent thermal stability
Integrated ESD protection
Designed for broadband operation (2400 MHz to 2500 MHz)
Internally matched
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
 RF power amplifiers for CW applications in the 2400 MHz to 2500 MHz frequency
range such as ISM and industrial heating.
BLF2425M7L(S)250P
Power LDMOS transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
Simplified outline
Graphic symbol
BLF2425M7L250P (SOT539A)
1
drain1
2
drain2
3
gate1
4
gate2
5
1
2
1
5
3
3
4
5
4
[1]
source
2
sym117
BLF2425M7LS250P (SOT539B)
1
drain1
2
drain2
3
gate1
4
gate2
5
1
1
2
5
3
3
4
5
4
[1]
source
2
sym117
[1]
Connected to flange.
3. Ordering information
Table 3.
Ordering information
Type number
Package
BLF2425M7L250P
Name
Description
Version
-
flanged balanced ceramic package;
2 mounting holes; 4 leads
SOT539A
earless flanged balanced ceramic package; 4 leads
SOT539B
BLF2425M7LS250P -
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
BLF2425M7L250P_2425M7LS250P#5
Product data sheet
Symbol
Parameter
Conditions
Min
Max
Unit
VDS
drain-source voltage
-
65
V
VGS
gate-source voltage
0.5
+13
V
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
225
C
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
2 of 11
BLF2425M7L(S)250P
Power LDMOS transistor
5. Thermal characteristics
Table 5.
Symbol
Thermal characteristics
Parameter
Rth(j-case) thermal resistance from junction to case
Conditions
Typ
Unit
Tcase = 80 C; PL = 250 W
0.19 K/W
6. Characteristics
Table 6.
DC characteristics
Tj = 25 C per section; unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
V(BR)DSS drain-source breakdown
voltage
VGS = 0 V; ID = 2.2 mA
65
-
-
V
VGS(th)
gate-source threshold voltage
VDS = 10 V; ID = 220 mA
1.5
1.9
2.3
V
IDSS
drain leakage current
VGS = 0 V; VDS = 28 V
-
-
3
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 10 V
-
39
-
A
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
300
nA
gfs
forward transconductance
VDS = 10 V; ID = 11 A
-
16
-
S
RDS(on)
drain-source on-state
resistance
VGS = VGS(th) + 3.75 V;
ID = 7.7 A
-
0.08
-

Table 7.
RF characteristics
Test signal: CW at 2450 MHz; RF performance at VDS = 28 V; IDq = 20 mA; Tcase = 25 C; unless
otherwise specified; in a class-AB production test circuit.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
PL = 250 W
14
15
-
dB
RLin
input return loss
PL = 250 W
-
18
10
dB
D
drain efficiency
PL = 250 W
46
51
-
%
7. Test information
7.1 Ruggedness in class-AB operation
The BLF2425M7L250P and BLF2425M7LS250P are capable of withstanding a load
mismatch corresponding to VSWR = 10 : 1 through all phases under the following
conditions: VDS = 28 V; IDq = 20 mA; PL = 250 W (CW); f = 2450 MHz.
BLF2425M7L250P_2425M7LS250P#5
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
3 of 11
BLF2425M7L(S)250P
Power LDMOS transistor
7.2 Impedance information
Table 8.
Typical impedance
Measured load-pull data half device. Typical values unless otherwise specified. IDq = 20 mA;
VDS = 28 V.
ZS and ZL defined in Figure 1.
f
ZS
ZL
(MHz)
()
()
2400
2.3  6.3j
3.8  2.7j
2450
3.3  6.0j
2.5  2.9j
2500
4.1  6.0j
3.3  2.3j
drain 1
gate 1
ZL
ZS
gate 2
drain 2
Fig 1.
001aak544
Definition of transistor impedance
7.3 Test circuit
C18
C12
C5
C16
R3
C4
C17
C2
C9
C19
C1
C11
R1
C6
C10
C7
C3
C15
R2
C8
C13
C14
aaa-004797
Printed-Circuit Board (PCB): Rogers RO4350B; thickness = 0.76 mm.
See Table 9 for list of components.
Fig 2.
BLF2425M7L250P_2425M7LS250P#5
Product data sheet
Component layout for test circuit
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
4 of 11
BLF2425M7L(S)250P
Power LDMOS transistor
Table 9.
List of components
For test circuit, see Figure 2.
Component
Description
Value
Remarks
C1, C2, C3, C11,
C12, C13
multilayer ceramic chip capacitor
36 pF
ATC800B
C4, C7, C14, C16
SMD capacitor
470 nF, 50 V
C5, C8, C15, C17
SMD capacitor
10 F, 50 V
C6, C19
multilayer ceramic chip capacitor
1.4 pF
ATC100B
C9, C10
multilayer ceramic chip capacitor
1.8 pF
ATC100B
C18
electrolytic capacitor
470 F, 63 V
R1
resistor
9.1 
SMD 0805
R2, R3
resistor
5.1 
SMD 0805
7.4 Graphical data
aaa-004798
18
60
Gp
(dB)
15
12
(1)
(2)
(3)
Gp
9
aaa-004799
18
ηD
(%)
Gp
(dB)
(3)
50
16
40
14
30
12
(2)
60
ηD
(%)
(1)
Gp
50
(3) (2)
(1)
40
30
ηD
6
20
10
20
10
8
10
0
6
ηD
3
0
32
36
40
44
48
52
56
PL (dBm)
60
0
VDS = 28 V; IDq = 20 mA.
50
100
(1) f = 2400 MHz
(2) f = 2450 MHz
(2) f = 2450 MHz
(3) f = 2500 MHz
(3) f = 2500 MHz
Power gain and drain efficiency as function of
load power; typical values
BLF2425M7L250P_2425M7LS250P#5
Product data sheet
200
250
300
PL (W)
0
350
VDS = 28 V; IDq = 20 mA.
(1) f = 2400 MHz
Fig 3.
150
Fig 4.
Power gain and drain efficiency as function of
load power; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
5 of 11
BLF2425M7L(S)250P
Power LDMOS transistor
8. Package outline
Flanged balanced ceramic package; 2 mounting holes; 4 leads
SOT539A
D
A
F
D1
U1
B
q
C
w2 M C M
H1
1
c
2
E1
p
H U2
5
L
3
A
E
w1 M A M B M
4
w3 M
b
Q
e
0
5
10 mm
scale
DIMENSIONS (millimetre dimensions are derived from the original inch dimensions)
UNIT
A
mm
4.7
4.2
inches
b
c
D
D1
e
E
E1
11.81 0.18 31.55 31.52
9.50
13.72
11.56 0.10 30.94 30.96
9.30
9.53
9.27
F
H
H1
L
1.75 17.12 25.53 3.48
1.50 16.10 25.27 2.97
p
Q
q
U1
3.30
3.05
2.26
2.01
35.56
U2
w1
41.28 10.29
0.25
41.02 10.03
w2
w3
0.51
0.25
0.185 0.465 0.007 1.242 1.241
0.374 0.375 0.069 0.674 1.005 0.137 0.130 0.089
1.625 0.405
1.400
0.010 0.020 0.010
0.540
0.165 0.455 0.004 1.218 1.219
0.366 0.365 0.059 0.634 0.995 0.117 0.120 0.079
1.615 0.395
Note
1. millimeter dimensions are derived from the original inch dimensions.
2. recommended screw pitch dimension of 1.52 inch (38.6 mm) based on M3 screw.
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
EIAJ
ISSUE DATE
10-02-02
12-05-02
SOT539A
Fig 5.
EUROPEAN
PROJECTION
Package outline SOT539A
BLF2425M7L250P_2425M7LS250P#5
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
6 of 11
BLF2425M7L(S)250P
Power LDMOS transistor
Earless flanged balanced ceramic package; 4 leads
SOT539B
D
A
F
5
D1
D
U1
H1
w2
1
c
D
2
E1
U2
H
E
L
3
4
w3
b
Q
e
0
5
10 mm
scale
Dimensions
Unit(1)
w2
w3
0.25
0.25
max 0.185 0.465 0.007 1.242 1.241 0.374 0.375
0.069 0.674 1.005 0.137 0.089 1.275 0.405
inches nom
0.01
0.54
min 0.165 0.455 0.004 1.218 1.219 0.366 0.365
0.059 0.634 0.995 0.117 0.079 1.265 0.395
0.01
mm
max
nom
min
A
b
4.7
11.81
c
D
D1
0.18 31.55 31.52
E
E1
9.5
9.53
e
F
H
H1
L
Q
U1
U2
1.75 17.12 25.53 3.48
2.26 32.39 10.29
1.50 16.10 25.27 2.97
2.01 32.13 10.03
13.72
4.2
11.56
0.10 30.94 30.96
9.3
9.27
Note
1. millimeter dimensions are derived from the original inch dimensions.
Outline
version
References
IEC
JEDEC
JEITA
European
projection
Issue date
12-05-02
13-05-24
SOT539B
Fig 6.
sot539b_po
Package outline SOT539B
BLF2425M7L250P_2425M7LS250P#5
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
7 of 11
BLF2425M7L(S)250P
Power LDMOS transistor
9. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
10. Abbreviations
Table 10.
Abbreviations
Acronym
Description
CW
Continuous Wave
ESD
ElectroStatic Discharge
LDMOS
Laterally Diffused Metal-Oxide Semiconductor
SMD
Surface Mounted Device
VSWR
Voltage Standing-Wave Ratio
11. Revision history
Table 11.
Revision history
Document ID
Release
date
BLF2425M7L250P_2425M7LS250P#5
20150901 Product data
sheet
Modifications:
Data sheet status Change Supersedes
notice
-
BLF2425M7L250P_2425M7LS250P v.4
•
The format of this document has been redesigned to comply with the new
identity guidelines of Ampleon.
•
Legal texts have been adapted to the new company name where appropriate.
BLF2425M7L250P_2425M7LS250P v.4 20130712 Product data
sheet
-
BLF2425M7L250P_2425M7LS250P v.3
BLF2425M7L250P_2425M7LS250P v.3 20130226 Product data
sheet
-
BLF2425M7L250P_2425M7LS250P v.2
BLF2425M7L250P_2425M7LS250P v.2 20120906 Objective data
sheet
-
BLF2425M7L250P_2425M7LS250P v.1
BLF2425M7L250P_2425M7LS250P v.1 20110718 Objective data
sheet
-
-
BLF2425M7L250P_2425M7LS250P#5
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
8 of 11
BLF2425M7L(S)250P
Power LDMOS transistor
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLF2425M7L250P_2425M7LS250P#5
Product data sheet
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
9 of 11
BLF2425M7L(S)250P
Power LDMOS transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
13. Contact information
For more information, please visit:
http://www.ampleon.com
BLF2425M7L250P_2425M7LS250P#5
Product data sheet
For sales office addresses, please visit:
http://www.ampleon.com/sales
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
10 of 11
BLF2425M7L(S)250P
Power LDMOS transistor
14. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
7.2
7.3
7.4
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 3
Ruggedness in class-AB operation . . . . . . . . . 3
Impedance information . . . . . . . . . . . . . . . . . . . 4
Test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
Handling information. . . . . . . . . . . . . . . . . . . . . 8
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contact information. . . . . . . . . . . . . . . . . . . . . 10
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLF2425M7L250P_2425M7LS250P#5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement