Datasheet Phoenix Inverter 12V

Datasheet Phoenix Inverter 12V
Phoenix Inverters 3kVA
www.victronenergy.com
(120V/60Hz)
SinusMax - Superior engineering
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications.
The design criteria have been to produce a true sine wave inverter with optimised efficiency but without
compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact
dimensions, light in weight and capable of supplying power, problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency
technology does not offer such extreme performance. Phoenix inverters, however, are well suited to power up
difficult loads such as refrigeration compressors, electric motors and similar appliances.
Virtually unlimited power thanks to parallel 3-phase and split phase operation capability
Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example,
will provide 24kW / 30kVA output power. Operation in 3-phase 0r split phase configuration is also possible.
Phoenix Inverter
24/5000
To transfer the load to another AC source: the automatic transfer switch
If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The
switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and
other electronic equipment will continue to operate without disruption because the MultiPlus features a very
short switchover time (less than 20 milliseconds).
Computer interface
All models have a RS-485 port. All you need to connect to your PC is our MK2 interface (see under accessories).
This interface takes care of galvanic isolation between the inverter and the computer, and converts from RS-485
to RS-232. A RS-232 to USB conversion cable is also available. Together with our VEConfigure software, which
can be downloaded free of charge from our website, all parameters of the inverters can be customised. This
includes output voltage and frequency, over and under voltage settings and programming the relay. This relay
can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be
connected to VENet, the new power control network of Victron Energy, or to other computerised monitoring
and control systems.
New applications of high power inverters
The possibilities of paralleled high power inverters are truly amazing. For ideas, examples and battery capacity
calculations please refer to our book “Energy Unlimited” (available free of charge from Victron Energy and
downloadable from www.victronenergy.com).
Phoenix Inverter Compact
24/1600
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40
E-mail: [email protected] | www.victronenergy.com
Phoenix Inverter
12/3000
24/3000
Parallel,3-phase and split-phase operation
Yes
INVERTER
Input voltage range (V DC)
9,5 – 17V
Output
19 – 33V
Output voltage: 230 VAC ±2% Frequency: 50 Hz ± 0,1% (1)
Cont. output power at 25 ºC (VA) (2)
3000
3000
Cont. output power at 25 ºC (W)
2500
2500
Cont. output power at 40 ºC (W)
2200
2200
Peak power (W)
6000
6000
Max. efficiency (%)
93
94
Zero-load power (W)
15
15
Zero-load power in AES mode (W)
10
10
Zero-load power in Search mode (W)
4
5
GENERAL
Programmable relay (3)
Yes
Protection (4)
a-g
VE.Bus communication port
For parallel and three phase operation, remote monitoring and system integration
Remote on-off
Yes
Operating temperature range: -40 to +50 ºC (0 - 120°F)
Humidity (non condensing): max 95%
ENCLOSURE
Common Characteristics
Common Characteristics
Material & Colour: aluminum (blue RAL 5012)
Battery-connection
Protection category: IP 21
2+2 M8 bolts
230 V AC-connection
Screw terminals
Weight
18 kg 38 lbs
Dimensions (hxwxd)
362x258x218 mm 14.3x10.2x8.6 inch
STANDARDS
Safety
EN 60335-1
Emission Immunity
1) Can be adjusted to 60Hz and to 240V
2) Non linear load, crest factor 3:1
3) Programmable relay that can a.o. be set for
general alarm, DC undervoltage or genset
start/stop function.
AC rating: 230V/4A
DC rating: 4a up to 35VDC, 1A up to 60VDC
EN 55014-1 / EN 55014-2
4) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 V AC on inverter output
g) input voltage ripple too high
Phoenix Inverter Control
Computer controlled operation and monitoring
BMV Battery Monitor
This panel can also be used on a
MultiPlus inverter/charger when an
automatic transfer switch but no charger
function is desired.
The brightness of the LEDs is
automatically reduced during night time.
Several interfaces are available:
- MK2.2 VE.Bus to RS232 converter
Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’)
- MK2-USB VE.Bus to USB converter
Connects to a USB port (see ‘A guide to VEConfigure’)
- VE.Net to VE.Bus converter
Interface to VE.Net (see VE.Net documentation)
- VE.Bus to NMEA 2000 converter
- VE.Bus to E-PLEX converter
- Victron Global Remote
The Global Remote is a modem which sends alarms, warnings and system
status reports to cellular phones via text messages (SMS). It can also log
data from Victron Battery Monitors, Multi’s, Quattro’s and Inverters to a
website through a GPRS connection. Access to this website is free of charge.
- Victron Ethernet Remote
To connect to Ethernet.
The BMV Battery Monitor features an
advanced microprocessor control system
combined with high resolution
measuring systems for battery voltage
and charge / discharge current. Besides
this, the software includes complex
calculation algorithms, like Peukert’s
formula, to exactly determine the state of
charge of the battery. The BMV selectively
displays battery voltage, current,
consumed Ah or time to go. The monitor
also stores a host of data regarding
performance and use of the battery.
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40
E-mail: [email protected] | www.victronenergy.com
Several models available (see battery
monitor documentation).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement