STEVAL-PCC015V1 Full speed USB to RS232 bridge Features

STEVAL-PCC015V1 Full speed USB to RS232 bridge Features
STEVAL-PCC015V1
Full speed USB to RS232 bridge
Data brief
Features
■
The demonstration board works as a bridge
between a standard USB port and a classical
serial COM port
■
The standard CDC class of USB is
implemented and emulates COM port
functionality to a standard USB port
■
The demonstration board implements RS232
full hardware flow control using RTS and CTS
■
The STM32 medium density line device
performs the communication task (bridge)
between the USB and RS232 (UART)
■
A standard DB9 connector (female) is used for
RS232 and therefore the user can directly
connect this demonstration board to the PC
■
The unit is bus-powered (this means it takes
power from the USB bus)
■
RoHS compliant
Description
The STEVAL-PCC015V1 demonstration board is
an easy and compact solution in order to make a
bridge between a standard USB port and a
standard serial COM port. In modern PCs, USB is
the standard communication port for almost all
peripherals. However many industrial software
applications and old equipment still use the
classic COM port (UART).
The STEVAL-PCC015V1 demonstration board
provides a simple solution to overcome this
problem.
February 2012
Doc ID 022790 Rev 1
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com
4
#/.
#
P&
#
N&
3(%,,
53"6
53"?$53"?$0
2
-
6$$
53"?05?0"
2
2
K
#
P&
53"$0?0!
#
U&
'.$
53"?$0
%.
6).
5
53!24?28?0!
53!24?#43?0!
U&
#
6$$
53!24?243?0!
#
N&
53!24?48?0!
#
N&
34"
2/54
2/54
4).
#
4).
#
#
#
5
343ECTION
,$052
!$*
6/54
0'
6/,4/54054
53"6 #
P&
53"$-?0!
#
N&
#
N&
6$$
53"?$-
'.$
#
N&
6$$
6$$
'.$
37$)/
53"$0?0!
53"$-?0!
'.$
53"6
53!24?28?0! 2
'.$
"//4
$&5?*-0?0"
*
$&5?*-0?0"
2
K
6
6
#
2).
2).
4/54
N&
4/54
6$$
'.$
53"3%#4)/.
$&5-ODE3ELECTOR
*
6$$?
633?
0! 0! 0! 0! 0! 0! 6$$?
34"
37$#ONNECTOR
37$)/
37#,+
N234
6$$
'.$
633?
0"
0"
0"
0! 0! 0! 0! 0! 6$$?
/3#?).0$
/3#?/540$
.234
34-&45
633!
6$$!
0! 7+50
0! 0! 0! 0! 0"
0"
0"
0"
0"
"//4
633?
6##
*
'.$
"//4
"//4
6$$
/3#?).
/3#?/54
N234
'.$
6$$
53!24?#43?0!
53!24?243?0!
53!24?48?0!
5
"//4
'.$
#
P&
/3#?/54
37#,+
/3#?/54
#/.
/3#?).
53"?05?0"
2
-
/3#?).
# N&
# N&
243
#43
28$
48$
#/.
*
Figure 1.
#
P&
*
1
34-3ECTION
Schematic
STEVAL-PCC015V1
Schematic
STEVAL-PCC015V1 schematic
!-V
STEVAL-PCC015V1
2
Revision history
Revision history
Table 1.
Document revision history
Date
Revision
20-Feb-2012
1
Changes
Initial release.
3/4
STEVAL-PCC015V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
Doc ID 022790 Rev 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement