Dewetron D300 D3PC-4, D3PC-8, -16, MDAQ -SUB-V200-BNC, -SUB-V200-D, -SUB-ACC-BNC, -SUB-ACC-A-BNC, -SUB-STG-D, -SUB-BRIDGE-D, SC4 -10mV-BNC, SC4 -100mV-BNC, SC4 -1V-BNC, SC4 -10V-BNC, SC4 -20V-BNC, SC4 -40V-BNC, SC4 -100V-B, SC4 -200V-B, SC4 -400V-B, SC4 -1000V-B Product selection guide

Dewetron D300 D3PC-4, D3PC-8, -16, MDAQ -SUB-V200-BNC, -SUB-V200-D, -SUB-ACC-BNC, -SUB-ACC-A-BNC, -SUB-STG-D, -SUB-BRIDGE-D, SC4 -10mV-BNC, SC4 -100mV-BNC, SC4 -1V-BNC, SC4 -10V-BNC, SC4 -20V-BNC, SC4 -40V-BNC, SC4 -100V-B, SC4 -200V-B, SC4 -400V-B, SC4 -1000V-B Product selection guide

Below you will find brief information for D300 D3PC-4, D300 D3PC-8, D300 D300-16. The D300 series are data acquisition systems that can be configured in multiple ways, including as a noise and vibration analyzer, a scope, or a BUS recorder/analyzer. The D300-16 can also be expanded to have up to 16 isolated SC4 series basic signal conditioners or 16 MDAQ differential signal conditioning channels.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Dewetron D300 D3PC-4, D300 D3PC-8, D300 D300-16 Product Selection Guide | Manualzz
D300-16 with MDAQ conditioners
D300 series
www.dewamerica.com/Products/D300
OVERVIEW
The D300 is our most affordable and flexible data
acquisition and computing platform. It can be
configured in several basic ways:
◙◙ As an 8-channel noise and vibration analyzer
(ORION-0824-200 A/D card inside): D3PC-8
◙◙ As a 4-channel noise and vibration analyzer
(ORION-0424-200 inside): D3PC-4
◙◙
With up to 16 ISOLATED SC4 series basic signal conditioners,
in blocks of four channels (any four can be installed), and any
A/D card inside
◙◙
With up to 16 MDAQ DIFFERENTIAL signal conditioning
channels, any two MDAQ-SUB blocks of 8 channels, and any
A/D card inside
◙◙
With any ZTEC series SCOPE card, as 2-channel PC-based
scope
◙◙
With any ARINC or 1553 interface card, as a highly portable
aircraft BUS recorder/analyzer
There are many additional instruments that can be
built on the D300 platform - it’s just that flexible. And
we have done everything to make it as affordable as
possible without sacrificing quality or reliability.
12
Dewetron PRODUCT SELECTION GUIDE
◙◙ Highly configurable and economical system
◙◙ Choose from direct inputs, SC4 isolated
conditioners, or any two MDAQ-SUB series
signal conditioners
◙◙ Full power DEWE computer inside
◙◙ One half-length PCI slot inside
◙◙ Compatible with ORION and AD series A/D
cards
◙◙ 500 GB removable HDD
◙◙ Keyboard and mouse are included
◙◙ VGA output connector (supports XGA
resolution displays)
◙◙ Wide range DC power input, plus a
convenient AC/DC adapter is included
◙◙ Metal door protects the computer interfaces
(ethernet, USB, VGA, A/V, etc.)
◙◙ Ruggedized construction, MIL-STD, CE
MARK, and more
◙◙ Small footprint D3PC available also as a
pure computer or PCI bridge host platform
◙◙ Made in USA
◙◙ Full year warranty
MDAQ differential conditioners
The D300 model is compatible with our MDAQ
differential conditioners. You may choose any two of
the MDAQ-SUB 8-channel conditioners to be installed
on the front panel, with BNC or DSUB connectors.
The most popular MDAQ-SUB is the STG-D, which
is a strain/bridge universal type signal conditioner,
because in addition to handling any kind of strain
gage and low voltage by itself, it also accepts our MSI
multiple sensor adapters, which convert each input
to something different, such as IEPE accelerometers,
charge accelerometers, ±200V signals, RTDs, and
even high bandwidth thermocouples.
But there are other MDAQ-SUBs, including 8 channel
IEPE accelerometers, 8 channels of voltage from ±125
mV to ±200V, and more.
SC4 ISOLATED signal conditionERS
When configured for SC4 conditioners, you can pick
any four of our ISOLATED 4-channel conditioners,
for a total of 16 inputs.
There are SC4 conditioners for different voltage
levels, different strain gage conditioners in full or half
bridge, with various thermocouples, and more.
EPAD2 series conditioners can be added to either
version, allowing you to expand your D300 to more
channels, adding slow channels for temperature, as
well as DC voltages and currents, in blocks of eight
channels.
D300 with SC4 signal conditioner panels: 4 thermocouples, four full or half bridge
strain gage, and four voltage inputs. All are isolated to 1500Vrms.
D3PC-4 and D3PC-8 models
The smallest DEWETRON systems ever made are
these two:
The D3PC-4 features four IEPE/low-voltage inputs
and an advanced counter input.
The D3PC-8 features eight IEPE/low-voltage inputs,
two advanced counter inputs, 8 DIO lines ... and
you can expand this model to have two CAN BUS
interfaces and more digital inputs/counters. You can
also sync multiple systems together to make a larger
channel count system!
Dewetron PRODUCT SELECTION GUIDE
13
D3PC-4 and D3PC-8 models
There are several basic configurations of the D300, starting with direct inputs from the A/D card, or ISOLATED
SC4 modules, or DIFFERENTAL MDAQ conditioners...
DIRECT INPUTS FROM ORION CARDS, 4-channel instrument
D3PC-4
◙◙
4 x BNC connectors for analog voltage or ICP (4 / 8 mA) inputs, TEDS support
◙◙
24-bit resolution, simultaneous sampling, 204.8 kS/s per channel, anti-aliasing filters
◙◙
4 different input ranges: ±0.1, ±0.5, ±2, ±10 V
◙◙
Single-ended or differential configuration, AC (0.15 or 3.4 Hz) or DC coupled
◙◙
SUB-D-9 connector with 1 synchronous advanced counter / encoder with
programmable threshold levels (0 ~ 40 V), input voltage range -35 ~ 60 V, AC/DC
coupling, plus an external trigger input (TTL with pull-up)
◙◙
Includes DS-7-SE acquisition and analysis software
◙◙
Nothing needs to be added to complete this system (except a display)
D3PC-4 upgrades
RAM-2048-3072
HARD DISK upgrades
Software upgrades
CAL-ORION-04-NIST-4
USB-ARINC or -1553
Upgrade the PC RAM from 1
GB to 2 GB or 3 GB
Change the HDD from a 500
GB spinning disk to a solid
state drive: 32, 64, or 128 GB.
Also, get a spare HDD
Upgrade the basic version of
DS-7 from -SE to -PROF, or
-DSA.
NIST traceable calibration data
for the ORION-0424-200 card
within the D300-4
Add a USB interface for ARINC
429 or MIL-STD-1553 interfaces to your system. Requires
software option PLUGINARINC/1553
D3PC-4 options & accessories
MOB-DISP-17
0424-CBL-DIG
Software options
ACCELS
GPS sensor
VIDEO camera
Ruggedized mobile display with
capacitive touchscreen, 17”
diag, XGA resolution
Mating cable for the digital
input connector of the ORION0424-200 card, 2 meters, with
stripped and tinned leads.
Add software options like order
tracking, sound level meter,
modal analysis, balancing,
and more.
Dewetron offers DYTRAN IEPE
accelerometers, which are perfectly suited to the D3PC-4
You can add a simple USB
GPS sensor with 1 Hz update
rate, or one of our 20/100 Hz
GPS sensors for incredible
precision.
A common webcam can be connected to the USB port, allowing you to record video in sync
with your data
D3PC-4 and -D3PC8 typical applications
BRAKE NOISE testing
HUMAN VIBRATION testing
MODAL testing
GENERAL PURPOSE testing
The four inputs can be used with IEPE microphones to measure SOUND very accurately.
Add a GPS sensor to correlate the data with
vehicle speed, position, heading, and other
parameters.
Add seat and other accelerometers with the
HUMAN VIBE software option, to study the
effects of vibration on human subjects. Ideal
for machinery, vehicles, and other applications.
With the synchronous counter input and four
IEPE inputs, the D3PC-4 makes the perfect
small channel count modal analysis instrument. Just add DS-OPT-FRF software option
and some IEPE accelerometers.
Any basic data acquisition application where
you need a small footprint self contained data
acquisition instrument with great dynamic
specifications (24-bit, 200 kS/s/ch, anti-aliasing)... at a great price point!
14
Dewetron PRODUCT SELECTION GUIDE
DIRECT INPUTS FROM ORION CARDS, 8-channel instrument
D3PC-8
D3PC-8 upgrades
◙◙
8 analog voltage or ICP (4 / 8 mA) inputs with sensor cable break detection and
TEDS support
◙◙
24-bit resolution, simultaneous sampling, 204.8 kS/s per channel, anti-aliasing filters
◙◙
4 different input ranges: ±0.1, ±0.5, ±2, ±10 V
◙◙
Single-ended or differential configuration, AC or DC coupled
◙◙
8 synchronous TTL digital I/Os (upgradable to 25V protection via UP-ORION-CTR8)
◙◙
2 synchronous advanced counter / encoder or 8 digital inputs with programmable
threshold levels (0 ~ 40 V), input voltage range -35 to 60 V, AC/DC coupling
◙◙
Includes DS-7-SE acquisition and analysis software
◙◙
Nothing needs to be added to complete this system (except a display)
RAM-2048-3072
HARD DISK upgrades
UP-ORION-CAN2
UP-ORION-CTR8
UP-ORION-200-1000-8
USB-ARINC or -1553
Upgrade the PC RAM from 1
GB to 2 GB or 3 GB
Change the HDD from a 500
GB spinning disk to a solid
state drive: 32, 64, or 128 GB.
Also, get a spare HDD
Adds two synchronous highspeed CAN BUS interfaces,
including DS-OPT-CAN software option, 2 x DB9’s
Upgrade from 8 TTL I/O lines
to 25V protected lines, and
from 2 advanced counters, to 8
advanced counters
Upgrade the A/D card from 200
kS/s max to 1000 kS/s max (@
16-bit instead of 24-bit)
Add a USB interface for ARINC
429 or MIL-STD-1553 interfaces to your system. Requires
software option PLUGINARINC/1553
D3PC-8 options & accessories
MOB-DISP-17
CTR-CBL-05
Software options
ACCELS
GPS sensor
VIDEO camera
Ruggedized mobile display with
capacitive touchscreen, 17”
diag, XGA resolution
Connection cable from counter
input (FGG.1B.307) to open
end, length 5 m.
Add software options like order
tracking, sound level meter,
modal analysis, balancing,
and more.
Dewetron offers DYTRAN IEPE
accelerometers, which are perfectly suited to the D3PC-4
You can add a simple USB
GPS sensor with 1 Hz update
rate, or one of our 20/100 Hz
GPS sensors for incredible
precision.
A common webcam can be connected to the USB port, allowing you to record video in sync
with your data
SOUND analysis testing
MODAL testing
Eight high-dynamic microphone inputs with
anti-aliasing filtering makes the D300-8 ideal
for all kinds of sound analyses. Great for
working in an anechoic chamber or in the
field.Add the DS-OPT-SNDLVL software option
and IEPE microphones.
With the synchronous counter input and eight
IEPE inputs, the D300-8 makes the perfect
medium channel count modal analysis instrument. Just add DS-OPT-FRF software option
and some IEPE accelerometers.
Dewetron PRODUCT SELECTION GUIDE
15
D300-8 with SC4/MDAQ conditioners
The D300-8 is compatible with 8 channels of ISOLATED SC4 modules, or 16 channels of DIFFERENTIAL
MDAQ conditioners...
WITH MDAQ DIFFERENTIAL or SC4 ISOLATED SIGNAL CONDITIONERS
D300-8
◙◙
8 channel ORION-0824-200 PCI A/D card built-in
◙◙
24-bit resolution, simultaneous sampling, 200 kS/s per channel 8 synchronous TTL
digital I/Os
◙◙
2 synchronous TTL counter / encoder or 8 TTL digital inputs
◙◙
Includes DS-7-SE acquisition and analysis software
◙◙
Please add any 2.0U-PANEL-MDAQ (or 1.5U-PANEL-MDAQ) plus 2 x MDAQ-SUBs
OR please add 16 channels of SC4 series signal conditioners
(MDAQ and SC4 series conditioners cannot be mixed)
D300-8 upgrades
RAM-2048-3072
HARD DISK upgrades
Software upgrades
USB-ARINC or -1553
Upgrade the PC RAM from 1
GB to 2 GB or 3 GB
Change the HDD from a 500
GB spinning disk to a solid
state drive: 32, 64, or 128 GB.
Also, get a spare HDD
Upgrade the basic version of
DS-7 from -SE to -PROF, or
-DSA.
Add a USB interface for ARINC
429 or MIL-STD-1553 interfaces to your system. Requires
software option PLUGINARINC/1553
A/D card upgrades
UP-ORION-200-1000-8
UP-ORION-CAN2
UP-ORION-CTR8
Upgrade the A/D card from 200
kS/s max to 1000 kS/s max (@
16-bit instead of 24-bit)
Adds two synchronous highspeed CAN BUS interfaces,
including DS-OPT-CAN software option, 2 x DB9’s
Upgrade from 8 TTL I/O lines
to 25V protected lines, and
from 2 advanced counters, to 8
advanced counters
D300-8 options & accessories
MOB-DISP-17
CTR-CBL-05
Software options
ACCELS
GPS sensor
VIDEO camera
Ruggedized mobile display with
capacitive touchscreen, 17”
diag, XGA resolution
Connection cable from counter
input (FGG.1B.307) to open
end, length 5 m.
Add software options like order
tracking, sound level meter,
modal analysis, balancing,
and more.
Dewetron offers DYTRAN IEPE
accelerometers, which are perfectly suited to the D3PC-4
You can add a simple USB
GPS sensor with 1 Hz update
rate, or one of our 20/100 Hz
GPS sensors for incredible
precision.
A common webcam can be connected to the USB port, allowing you to record video in sync
with your data
16
Dewetron PRODUCT SELECTION GUIDE
FACTORY INSTALLED MDAQ DIFFERENTIAL signal conditioners:
To configure the D300-8 with MDAQ differential
signal conditioning, simply order the appropriate
PANEL - either the 2.0U high one which can hold
MDAQs with DSUB connectors (or half DSUB and
half BNC), or the 1.5U one which can hold up to 16
BNC connectors.The 1.5U high one, there is a 0.5U
high space still available for other PANELS that you
might want to have us install.
1.5U-PANEL-MDAQ-BNC
2.0U-PANEL-MDAQ
D300
2.0U-PANEL-MDAQ
Accepts any of our 8 channel MDAQ-SUB modules, regardless of connector type.
When this PANEL is installed, all 8 channels from the standard A/D card are connected to
these 8 signal conditioning inputs.
See below for MDAQ-SUB 8-channel conditioners.
OR...
1.5U-PANEL-MDAQ-BNC
Accepts any of our 8 channel MDAQ-SUB modules with BNC connectors only.
When this PANEL is installed, all 8 channels from the standard A/D card are connected to
these 8 signal conditioning inputs.
See below for MDAQ-SUB 8-channel conditioners.
MDAQ-SUB 8-channel conditioners (choose any ONE of these for the D300-8)
MDAQ-SUB-V200-BNC
MDAQ-SUB-V200-D
MDAQ-SUB-ACC-BNC
MDAQ-SUB-ACC-A-BNC
MDAQ-SUB-STG-D
MDAQ-SUB-BRIDGE-D
8 channel voltage module
16 selectable ranges from
±0.125V to ±200V.
Differential inputs.
CMV ±250 V.
Accuracy ±0.05%.
Bandwidth 300 kHz.
BNC connectors (8)
8 channel voltage
16 selectable ranges from
±0.125V to ±200V.
Differential inputs.
CMV ±250V.
Accuracy ±0.05%.
Bandwidth 300 kHz
±15 VDC fixed sensor supply
and programmable 0~12 VDC
sensor supply
TEDS support
9-pin DSUB connectors (8)
8 channel IEPE / low-voltage
input, selectable ranges of ±10,
5, 2.5, 1.25, 1, 0.5, 0.25 and
0.125 V; sensor power 4 / 8 mA
selectable. CMV ±12 V.
AC or DC coupling.
Differential / single-ended (voltage mode only).
Accuracy ±0.05%.
Bandwidth DC to 300 kHz.
Selectable 3.4 Hz high-pass
filter. TEDS support.
BNC connectors (8)
8 channel IEPE / low-voltage
input, selectable ranges of ±10,
5, 2.5, 1.25, 1, 0.5, 0.25 and
0.125 V; sensor power 4 / 8 mA
selectable. CMV ±12 V.
AC or DC coupling.
Differential (IEPE mode); single-ended (voltage mode).
Accuracy ±0.05%.
Bandwidth DC to 300 kHz.
Selectable 2 programmable
high pass filters: 0.16 Hz,
3.4 Hz.
TEDS support.
BNC connectors (8)
8 channel strain / low-voltage
input. Modes: full bridge, 1⁄2
bridge, 1⁄4 bridge 120 Ω, 1⁄4
bridge 350 Ω or voltage.
Full bridge sensors 120 Ω to
10 kΩ.
Internal completion for 1⁄2
bridge and 1⁄4 bridge sensors
internal 50 kΩ and 100 kΩ
shunt resistors
14 selectable ranges from
±0.5 to ±1000 mV/V (@ 5 V
excitation)
Voltage mode ranges from ±5
mV to ±10 V
Bandwidth DC to 30 kHz
Excitation voltage from 0~12
VDC. TEDS support
9-pin DSUB connectors (8)
8 channel bridge / low-voltage
input. Modes: full bridge, 1⁄2
bridge
Full bridge sensors 120 Ω to
10 kΩ.
Internal completion for 1⁄2
bridge sensors
AC/DC coupling
14 selectable ranges from
±0.5 to ±1000 mV/V (@ 5 V
excitation)
Voltage mode ranges from ±5
mV to ±10 V
Bandwidth DC to 30 kHz
Excitation voltage from 0~12
VDC. TEDS support
9-pin DSUB connectors (8)
Alternate version:
MDAQ-SUB-ACC-BNC-S1
Same as MDAQ-SUB-ACCBNC, except that the high-pass
filter is 1.6 Hz (typical for
structural analysis, modal, and
human body vibration)
Dewetron PRODUCT SELECTION GUIDE
17
D300-16 with SC4/MDAQ conditioners
The D300-16 is compatible with 16 channels of ISOLATED SC4 modules, or 16 channels of DIFFERENTIAL
MDAQ conditioners...
WITH MDAQ DIFFERENTIAL or SC4 ISOLATED SIGNAL CONDITIONERS
D300-16
◙◙
16 channel ORION-1616-100 PCI A/D card built-in
◙◙
16-bit resolution, simultaneous sampling, 100 kS/s per channel 8 synchronous TTL
digital I/Os
◙◙
2 synchronous TTL counter / encoder or 8 TTL digital inputs
◙◙
Includes DS-7-SE acquisition and analysis software
◙◙
Please add any 2.0U-PANEL-MDAQ (or 1.5U-PANEL-MDAQ) plus 2 x MDAQ-SUBs
OR please add 16 channels of SC4 series signal conditioners
(MDAQ and SC4 series conditioners cannot be mixed)
D300-16 upgrades
RAM-2048-3072
HARD DISK upgrades
UP-ORION-CAN2
UP-ORION-CTR8
Software upgrades
USB-ARINC or -1553
Upgrade the PC RAM from 1
GB to 2 GB or 3 GB
Change the HDD from a 500
GB spinning disk to a solid
state drive: 32, 64, or 128 GB.
Also, get a spare HDD
Adds two synchronous highspeed CAN BUS interfaces,
including DS-OPT-CAN software option, 2 x DB9’s
Upgrade from 8 TTL I/O lines
to 25V protected lines, and
from 2 advanced counters, to 8
advanced counters
Upgrade the basic version of
DS-7 from -SE to -PROF, or
-DSA.
Add a USB interface for ARINC
429 or MIL-STD-1553 interfaces to your system. Requires
software option PLUGINARINC/1553
A/D card upgrades
UP-ORION-16-22
UP-ORION-16-24
UP-ORION-100-500
UP-ORION-100-1000
DN-ORION-AD16-1000-16
Upgrade the A/D card from
16-bit to 22-bit with anti-aliasing filters (ORION-1622-100).
Max SR is still 100 kS/s/ch
Upgrade the A/D card from
16-bit to 24-bit with antialiasing filters (ORION-1624200). Max SR increases to 200
kS/s/ch
Upgrade the A/D card from max
SR of 100 kS/s/ch to 500 kS/s/
ch (ORION-1616-500). Bit resolution remains at 16-bits.
Upgrade the A/D card from max
SR of 100 kS/s/ch to 1000 kS/s/
ch (ORION-1616-1000). Bit
resolution remains at 16-bits.
Downgrade the standard A/D
card to a multiplexed type, 16
channels, 1000 kS/s (aggregate) max. SR.
D300-16 options & accessories
MOB-DISP-17
CTR-CBL-05
Software options
ACCELS
GPS sensor
VIDEO camera
Ruggedized mobile display with
capacitive touchscreen, 17”
diag, XGA resolution
Connection cable from counter
input (FGG.1B.307) to open
end, length 5 m.
Add software options like order
tracking, sound level meter,
modal analysis, balancing,
and more.
Dewetron offers DYTRAN IEPE
accelerometers, which are perfectly suited to the D3PC-4
You can add a simple USB
GPS sensor with 1 Hz update
rate, or one of our 20/100 Hz
GPS sensors for incredible
precision.
A common webcam can be connected to the USB port, allowing you to record video in sync
with your data
18
Dewetron PRODUCT SELECTION GUIDE
FACTORY INSTALLED MDAQ DIFFERENTIAL signal conditioners:
To configure the D300-16 with MDAQ differential
signal conditioning, simply order the appropriate
PANEL - either the 2.0U high one which can hold
MDAQs with DSUB connectors (or half DSUB and
half BNC), or the 1.5U one which can hold up to 16
BNC connectors.The 1.5U high one, there is a 0.5U
high space still available for other PANELS that you
might want to have us install.
1.5U-PANEL-MDAQ-BNC
2.0U-PANEL-MDAQ
D300
2.0U-PANEL-MDAQ
Accepts any two of our 8 channel MDAQ-SUB modules, regardless of connector type.
When this PANEL is installed, all 16 channels from the standard A/D card are connected
to these 16 signal conditioning inputs.
See below for MDAQ-SUB 8-channel conditioners.
OR...
1.5U-PANEL-MDAQ-BNC
Accepts any two of our 8 channel MDAQ-SUB modules with BNC connectors only.
When this PANEL is installed, all 16 channels from the standard A/D card are connected
to these 16 signal conditioning inputs.
See below for MDAQ-SUB 8-channel conditioners.
MDAQ-SUB 8-channel conditioners (choose 2, or 2 of the same one)
MDAQ-SUB-V200-BNC
MDAQ-SUB-V200-D
MDAQ-SUB-ACC-BNC
MDAQ-SUB-ACC-A-BNC
MDAQ-SUB-STG-D
MDAQ-SUB-BRIDGE-D
8 channel voltage module
16 selectable ranges from
±0.125V to ±200V.
Differential inputs.
CMV ±250 V.
Accuracy ±0.05%.
Bandwidth 300 kHz.
BNC connectors (8)
8 channel voltage
16 selectable ranges from
±0.125V to ±200V.
Differential inputs.
CMV ±250V.
Accuracy ±0.05%.
Bandwidth 300 kHz
±15 VDC fixed sensor supply
and programmable 0~12 VDC
sensor supply
TEDS support
9-pin DSUB connectors (8)
8 channel IEPE / low-voltage
input, selectable ranges of ±10,
5, 2.5, 1.25, 1, 0.5, 0.25 and
0.125 V; sensor power 4 / 8 mA
selectable. CMV ±12 V.
AC or DC coupling.
Differential / single-ended (voltage mode only).
Accuracy ±0.05%.
Bandwidth DC to 300 kHz.
Selectable 3.4 Hz high-pass
filter. TEDS support.
BNC connectors (8)
8 channel IEPE / low-voltage
input, selectable ranges of ±10,
5, 2.5, 1.25, 1, 0.5, 0.25 and
0.125 V; sensor power 4 / 8 mA
selectable. CMV ±12 V.
AC or DC coupling.
Differential (IEPE mode); single-ended (voltage mode).
Accuracy ±0.05%.
Bandwidth DC to 300 kHz.
Selectable 2 programmable
high pass filters: 0.16 Hz,
3.4 Hz.
TEDS support.
BNC connectors (8)
8 channel strain / low-voltage
input. Modes: full bridge, 1⁄2
bridge, 1⁄4 bridge 120 Ω, 1⁄4
bridge 350 Ω or voltage.
Full bridge sensors 120 Ω to
10 kΩ.
Internal completion for 1⁄2
bridge and 1⁄4 bridge sensors
internal 50 kΩ and 100 kΩ
shunt resistors
14 selectable ranges from
±0.5 to ±1000 mV/V (@ 5 V
excitation)
Voltage mode ranges from ±5
mV to ±10 V
Bandwidth DC to 30 kHz
Excitation voltage from 0~12
VDC. TEDS support
9-pin DSUB connectors (8)
8 channel bridge / low-voltage
input. Modes: full bridge, 1⁄2
bridge
Full bridge sensors 120 Ω to
10 kΩ.
Internal completion for 1⁄2
bridge sensors
AC/DC coupling
14 selectable ranges from
±0.5 to ±1000 mV/V (@ 5 V
excitation)
Voltage mode ranges from ±5
mV to ±10 V
Bandwidth DC to 30 kHz
Excitation voltage from 0~12
VDC. TEDS support
9-pin DSUB connectors (8)
Alternate version:
MDAQ-SUB-ACC-BNC-S1
Same as MDAQ-SUB-ACCBNC, except that the high-pass
filter is 1.6 Hz (typical for
structural analysis, modal, and
human body vibration)
Dewetron PRODUCT SELECTION GUIDE
19
D300-8 / -16 with SC4 conditioners
RACKS for FACTORY INSTALLED SC4 ISOLATED signal conditioners:
If you want to configure the D300-16 with SC4
isolated signal conditioning, simply select any four
of the SC4 conditioners, which include the 0.5U high
panel that the connectors are mounted on, as well as
the conditioners that are installed inside the system.
You can choose any combination of SC4 modules,
including all four the same, or all different, etc. Most
SC4 conditioners are isolated to 1500V RMS.
0.5U PANEL SLOT 1
0.5U PANEL SLOT 2
0.5U PANEL SLOT 3
0.5U PANEL SLOT 4
D300
SC4 series ISOLATED 4-channel conditioners - choose any combination of four
LOW VOLTAGE
SC4-10mV-BNC
SC4-100mV-BNC
SC4-1V-BNC
SC4-10V-BNC
SC4-20V-BNC
SC4-40V-BNC
Analog input channels
4
4
4
4
4
4
Full scale input range
±10 mV
±100 mV
±1 V
±10 V
±20 V
±40 V
Bandwidth (-3 dB point)
10 kHz
10 kHz
10 kHz
10 kHz
10 kHz
10 kHz
CMV (isolation)
1500 Vrms maximum continuous (transient according to ANSI/IEEE C37.90.1)
CMR (50 or 60 Hz)
100 dB
100 dB
100 dB
100 dB
100 dB
NMR
(–3 dB at 10 kHz) 120 dB per decade above 10kHz
Accuracy
±0.03% span
±0.03% span
±0.03% span
±0.03% span
±0.03% span
±0.03% span
Linearity
±0.01% span
±0.01% span
±0.01% span
±0.01% span
±0.01% span
±0.01% span
Input protection
240 Vrms max.
240 Vrms max.
240 Vrms max.
240 Vrms max.
240 Vrms max.
240 Vrms max.
Output protection
Continuous short to
ground
Continuous short to
ground
Continuous short to
ground
Continuous short to
ground
Continuous short to
ground
Continuous short to
ground
Input resistance
Normal 200 MΩ, Power
off: 40 kΩ, Overload:
40 kΩ
Normal 200 MΩ, Power
off: 40 kΩ, Overload:
40 kΩ
Normal 200 MΩ, Power
off: 40 kΩ, Overload:
40 kΩ
Normal/Power off/
Overload: 650 kΩ minimum
Normal/Power off/
Overload: 650 kΩ minimum
Normal/Power off/
Overload: 650 kΩ minimum
Connectors:
Four insulated BNC input connectors on a 0.5U panel
100 dB
HIGH VOLTAGE
SC4-100V-B
SC4-200V-B
SC4-400V-B
SC4-1000V-B
Analog input channels
4
4
4
4
Full scale input range
±100 V
±200 V
±400 V
±1000 V
Bandwidth (-3 dB point)
10 kHz
10 kHz
10 kHz
10 kHz
CMV (isolation)
1500 Vrms maximum continuous (transient according to ANSI/IEEE C37.90.1)
CMR (50 or 60 Hz)
100 dB
NMR
(–3 dB at 10 kHz) 120 dB per decade above 10kHz
Accuracy
±0.03% span
Linearity
±0.01% span
Input protection
100 dB
100 dB
100 dB
±0.03% span
±0.03% span
±0.03% span
±0.01% span
±0.01% span
±0.01% span
240 Vrms max.
240 Vrms max.
240 Vrms max.
240 Vrms max.
Output protection
Continuous short to
ground
Continuous short to
ground
Continuous short to
ground
Continuous short to
ground
Input resistance
Normal 200 MΩ, Power
off: 40 kΩ, Overload:
40 kΩ
Normal 200 MΩ, Power
off: 40 kΩ, Overload:
40 kΩ
Normal 200 MΩ, Power
off: 40 kΩ, Overload:
40 kΩ
Normal/Power off/
Overload: 650 kΩ minimum
Connectors:
Four insulated banana jack input connectors on a 0.5U panel
Note - when SC4 high voltage modules are used, the D300-16 is limited to 8 dynamic input channels.
20
Dewetron PRODUCT SELECTION GUIDE
RTD
SC4-RTD-P1002W3W
SC4-RTD-P1004W
CURRENT
SC4-LA-4-20mA
Analog input channels
4
Analog input channels
4
4
Full scale range:
4 - 20 mA
Linearization
Fully linearized
Fully linearized
Bandwidth (-3 dB point)
4 Hz
Full scale range:
-100°C to +200°C
-100°C to +200°C
CMV (isolation)
Sensor compatibility
100 Ω Platinum RTD
100 Ω Platinum RTD
Wiring modes
2 and 3-wire configurations only
4-wire configuration only
1500 Vrms maximum
continuous (transient
according to ANSI/IEEE
C37.90.1)
Bandwidth (-3 dB point)
4 Hz
4 Hz
NMR
95dB at 60Hz, 90dB at
50Hz
CMV (isolation)
1500 Vrms maximum continuous (transient according to
ANSI/IEEE C37.90.1)
Accuracy
±0.03% Span
Input protection
240 Vrms max.
Connectors:
Four insulated DB9 input
connectors on a 0.5U
panel
NMR
95 dB at 60 Hz, 90 dB at 50 Hz
Accuracy
±0.18°C
±0.18°C
Input protection
240 Vrms max.
240 Vrms max.
Connectors:
Four insulated DB9 input connectors on a 0.5U panel
THERMOCOUPLES
SC4-TH-J
SC4-TH-K
SC4-TH-T
Analog input channels
4
4
4
Bandwidth (-3 dB point)
4 Hz
4 Hz
4 Hz
CMV (isolation)
1500 Vrms maximum continuous (transient according to ANSI/IEEE C37.90.1)
Linearization
Fully linearized with automatic CJC
NMR
95 dB at 60 Hz, 90 dB at 50 Hz
Accuracy
±0.08% (±0.61°C)
±0.08% (±0.61°C)
±0.08% (±0.61°C)
Input protection
240 Vrms max.
240 Vrms max.
240 Vrms max.
Connectors:
Four insulated miniature thermocouple input connectors on a 0.5U panel
BRIDGE/STRAIN
SC4-BRF-3V3mV
SC4-BRF-10V2mV
SC4-BRH-3V3mV
Analog input channels
4
4
4
Bridge mode
FULL bridge
FULL bridge
HALF bridge
HALF bridge
Full scale range:
100 Ω to 10 kΩ
300 Ω to 10 kΩ
100 Ω to 10 kΩ
300 Ω to 10 kΩ
Excitation Voltage
3 V
10 V
3 V
10 V
Sensitivity
3 mV/V
2 mV/V
3 mV/V
3 mV/V
Bandwidth (-3 dB point)
10 kHz
10 kHz
10 kHz
10 kHz
CMV (isolation)
1500 Vrms maximum continuous (transient according to ANSI/IEEE C37.90.1)
Linearity
±0.01% Span
NMR
120 dB per decade above 10kHz
Accuracy
±0.03% Span
Input protection
240 Vrms max.
Output protection
Continuous short to
ground
Connectors:
Four insulated DB9 input connectors on a 0.5U panel
±0.01% Span
SC4-BRH-10V2mV
±0.01% Span
±0.01% Span
±0.03% Span
±0.03% Span
±0.03% Span
240 Vrms max.
240 Vrms max.
240 Vrms max.
Continuous short to
ground
Continuous short to
ground
Continuous short to
ground
D300-16 typical applications
VEHICLE / CAN / GPS testing
BURN-IN and LIFE-CYCLE testing
SHOCK RESPONSE SPECTRUM testing
GENERAL PURPOSE testing
The 16 inputs can be configured with every
kind of sensor: strain, accel, voltage, current,
temperature, and more. Add two CAN BUS
interfaces to add vehicle data, and a GPS
sensor to record vehicle speed, position,
heading, and other parameters.
The D300-16 is versatile enough to handle
just about any data acquisition application,
including factory burn-inm HALT and HASS
testing, of satellite components, vehicle parts,
motors and turbines, manufacturing equipment, and more.
With its 16 dynamic IEPE inputs, the D30016 makes a great SRS instrument. Configure
your inputs for charge, IEPE, or strain gages,
voltages, and more. Get the UP-ORION-16-24
upgrade, the DS-OPT-SRS software option,
and your sensors.
Any basic data acquisition application where
you need a small footprint self contained data
acquisition instrument with great dynamic
specifications (24-bit, 200 kS/s/ch, anti-aliasing)... at a great price point!
Dewetron PRODUCT SELECTION GUIDE
21
D300 expansion guide
32-channel ORION card
in D300-16 mainframe
Expansion via analog cable
A very popular way of expanding the analog
inputs is to upgrade the ORION card from 16
to 32 dynamic channels, then connect external
signal conditioning amplifiers via an analog cable.
Simply upgrade the D300-16 to have 32 A/D
channels inside via either the UP-ORION-16-22-32
(22-bit @ 100 kS/s/ch) or the UP-ORION-1616-32
option (16-bit @ 100 kS/s/ch), then add an
external 16 channel conditioning chassis and
cable. Choose from MDAQ or DAQ / HSI series
plug-in conditioners.
AN
A LO
PO
G SIGNALS
WE
PP
R SU
LY
AC (optional DC)
power supply
DEWE-31-16 or
DEWE-30-16 expansion
chassis
Expansion chassis
DEWE-30-16
DEWE-31-16
Amplifier slots
16
--
MDAQ channels
--
8 or 16
A/D converter
(Connects to the A/D card in the main system - there is no A/D
converter inside any DEWE-30 or DEWE-31 chassis)
Power supply (standard)
120/230 VAC 50/60 Hz
DC from the mainframe or via
AC/DC adapter
Dimensions (WxDxH)
435 x 133 x 245 mm
17.1 x 5.2 x 9.6 in.
208 x 95 x 108 mm
8.2 x 3.7 x 4.3 in
Weight
4 kg (9 lbs)
1.6 kg (3.5 lbs)
Expansion via PCI bridge
The PCI expansion is an alternative especially if high channel count
is needed. The best mainframe to use is the D3PC computer chassis,
which has no inputs of its own, but it will contain the PCI bridge card
and run the whole system. The DEWE-50, DEWE-51 and DEWE-52 ADC
racks can be connected by a 1m PCI cables. ORION series cards are
installed inside the DEWE-5x unit and you simply have to select the
suitable signal amplifiers for your needs.
AC (optional DC)
power supply
D3PC with PCI
PCI H
OST
bridge card
inside
In this way, the D3PC can serve as the host of a system with dozens,
hundreds, or even more than 1000 dynamic input channels!
SY N C
Important notice: Each DEWE-50/51/52 chassis must be equipped with
ORION-SYNC option.
DEWE-52-PCI-3216
Expansion chassis
DEWE-50-PCI-32
DEWE-50-PCI-64
DEWE-51-PCI-32
DEWE-51-PCI-128
DEWE-52-PCI-3216
Amplifier slots
32
64
--
--
16
MDAQ channels
--
--
Up to 64
Up to 128
Up to 32
ORION card slots
3
7
7
13
7
Power supply (standard)
120/230 VAC 50/60 Hz
120/230 VAC 50/60 Hz
120/230 VAC 50/60 Hz
120/230 VAC 50/60 Hz
120/230 VAC 50/60 Hz
Dimensions (WxDxH)
435 x 287 x 223 mm
17.1 x 11.3 x 8.8 in.
408 x 287 x 410 mm
16.1 x 11.3 x 16.1 in.
435 x 287 x 178 mm
17.1 x 11.3 x 7.0 in.
408 x 287 x 267 mm
16.1 x 11.3 x 10.5 in
435 x 287 x 223 mm
17.1 x 11.3 x 8.8 in.
Weight
10 kg (22 lbs)
15 kg (33 lbs)
6 kg (13 lbs)
9 kg (20 lbs)
9 kg (20 lbs)
22
Dewetron PRODUCT SELECTION GUIDE
Expansion via Ethernet
The NET expansion is a fantastic way to
combine two or more DEWE instruments to
one multichannel system. Each instrument
must have installed hardware option ORIONSYNC and software option DS-OPT-NET.
Synchronization of all units is required too.
There are two ways of synchronization: First is
a simple cable connection for distances up to
200 m, second one is GPS- or DEWE-CLOCK
which is useful for long distances when a
cable connection is not possible. DS-OPTNET software offers full remote setup, online
data transfer up to the limit of the network
connection and offline data transfer between
the instruments.
User tip: The NET expansion also distributes
the data processing load among multiple
computers, each of which can store data at full
speed.
Specifications
Specification
D300 series
Direct Voltage / IEPE inputs:
D3PC-4: 4 channels
D3PC-8: 8 channels
MDAQ-SUB positions
D300-16: 2 positions (16 channels)
SC4 positions
D300-16: 4 positions (16 channels)
Main system
Total PCI slots
1 x half-length PCI slots
Hard disk
500 GB standard removable drive (optional solid state drive)
Data throughput to disk
50 MB/s typical; faster rates available with the additional of an internal
RAID controller and/or additional drives
Power supply
9~29 VDC. Includes external AC/DC power adapter for operating the system from 120/240 VAC 50/60 Hz.
Processor
Intel Core2Duo 2.0 GHz CPU, on a standard industrial grade MiniITX
mainboard
RAM
2 GB (expandable to 4 GB)
Computer interfaces:
2 x Gb ethernet; 4 x USB 2.0; 1 x RS232 serial (DB9 connector)
Operating system
Microsoft Windows7 32-bit included (64-bit available Q4 2012)
Dimensions (W x D x H)
(without bumpers)
D3PC: 8.5 x 4.75 x 10.78 (216 x 121 x 274 mm)
D300: 14.5 x 4.75 x 10.78 (368 x 121 x 274 mm)
Weight
D3PC models: 4 kg typical (~9 lbs)
D300-16 models: 5.5 kg typical (~12 lbs)
Environmental specifications
Operating temperature
-20 to 50°C (0 to 45°C with batteries installed) (storage temp -20 to 60C)
Humdity
10 to 80% non-condensing, 5 to 95% relative humidity
Vibration
MIL-STD-810F, EN 60068-2-6, EN 60721-3-2 class 2M2
Shock
MIL-STD-810F, EN 60068-2-27
Data acquisition specifications
D3PC-4 model:
Includes ORION-0424-200 A/D card (IEPE signal conditioning included)
4 different input ranges: ±0.1V, ±0.5V, ±2V, ±10V
4 BNC connectors for analog voltage or ICP (4 / 8 mA) inputs, TEDS support
24-bit resolution, simultaneous sampling, 204.8 kS/s per channel, antialiasing filters
Single-ended or differential inputs, software selectable
AC (0.15 or 3.4 Hz) or DC coupled
One synchronous advanced counter/encoder with programmable threshold
levels (0 ~ 40 V), input voltage range -35 ~ 60 V, DB9 connector
External trigger input
D3PC-8 model:
Includes ORION-0824-200 A/D card (IEPE signal conditioning included)
4 different input ranges: ±0.1V, ±0.5V, ±2V, ±10V
8 BNC connectors for analog voltage or ICP (4 / 8 mA) inputs, TEDS support
24-bit resolution, simultaneous sampling, 204.8 kS/s per channel, antialiasing filters
Single-ended or differential inputs, software selectable
AC (0.15 or 3.4 Hz) or DC coupled
Two synchronous advanced counters/encoders with programmable threshold levels (0 ~ 40 V), input voltage range -35 ~ 60 V, LEMO connectors
8 synchronous TTL digital I/Os and one external trigger input, DB37
D300-16 model:
Includes ORION-1616-100 A/D card (requires signal conditioning)
100 kS/s/ch simultaneous sampling, 16-bit resolution (ORION-1616-100)
Please order your choice of either 4 x SC4 conditioners, or MDAQ PANEL
and SUB modules to complete this system.
Upgrades to faster cards, and higher resolution cards available
D300-16 A/D card upgrades:
UP-ORION-16-22: upgrade to 22-bit with 102.4 kS/s/ch and anti-aliasing
UP-ORION-16-22-32: upgrade to 22-bit with 102.4 kS/s/ch and from 16 to
32 channels
UP-ORION-16-24: upgrade to 22-bit with 204.8 kS/s/ch and anti-aliasing
UP-ORION-100-500: upgrade to 16-bit with 500 kS/s/ch
UP-ORION-100-1000: upgrade to 16-bit with 1000 kS/s/ch
UP-ORION-1616-3216: upgrade from 16 channels to 32 channels (100
kS/s/ch maximum sample rate @ 16-bit resolution)
Data acquisition software:
DS-7-SE is included as standard
Software upgrades available:
To DS-7-PROF, DS-7-DSA, and a variety of OPTIONS and PLUGINS
D300-16 EPAD interface:
Standard LEMO 4-pin connector. EPAD2 modules are daisy-chainable
D3PC-8
D300-16
SYNC
ETHERNE
T
0.000 ms
D300-16
GPS-CLOCK
SYNC
External channel expansion
Low-speed channel expansion:
Up to 16 EPAD2 modules can be connected to the EPAD connector, adding
up to 128 channels of low-speed thermocouple, voltage, RTD, and current
inputs, in blocks of eight channels
Expansion via analog cable:
D300-16 only - first upgrade the internal A/D card to have 32 channels:
UP-ORION-1616-3216 upgrades the std card from 16 to 32 channels
UP-ORION-16-22-32 upgrades the std card from 16 to 32 channels, and
from 16-bit to 22-bit resolution with anti-aliasing filtering
D300-16 only - then add an external 16 channel chassis of conditioning
(see optional expansion chassis on this page)
Expansion via PCI bridge:
Up to 256 total dynamic analog input channels (with PCI bridge card
installed inside the D3PC, and external DEWE-50/51 chassis connected.
Expansion via ethernet:
Up to 2000 total dynamic analog input channels (with SYNC option for
local connections, or IRIG/GPS sync for remote connections, and multiple
remote DEWE systems synchronized via DS-OPT-NET software option.
GPS-CLOCK
D3PC-8
SYNC
ETHER
NET
Dewetron PRODUCT SELECTION GUIDE
23

advertisement

Key Features

  • Economical and highly configurable system
  • Full power DEWE computer inside
  • 500 GB removable HDD
  • VGA connector with XGA resolution display
  • Includes keyboard and mouse
  • Wide range DC power input
  • Ruggedized construction, MIL-STD, CE MARK, and more
  • Small footprint D3PC available also as pure computer
  • Made in USA
  • Full year warranty

Frequently Answers and Questions

How many channels can the D300-16 be configured with?
The D300-16 can be configured with up to 16 isolated SC4 series basic signal conditioners or 16 MDAQ differential signal conditioning channels.
What are the standard features of the D300 series?
The D300 series includes a full power DEWE computer inside, 500 GB removable HDD, a VGA connector with XGA resolution display, a keyboard and mouse, a wide range DC power input, ruggedized construction, a small footprint D3PC available also as a pure computer, and comes with a full year warranty.
Which MDAQ-SUB modules are compatible with the D300-16?
The D300-16 is compatible with any two of the MDAQ-SUB 8-channel conditioners, which can be installed on the front panel, with BNC or DSUB connectors.

Related manuals

Download PDF

advertisement