Alpine PKG-RSE3DVD Specifications

Alpine PKG-RSE3DVD Specifications
DVD Entertainment System
PKG-RSE3DVD
QUICK START GUIDE
III DOLBY.
DIGITAL
wo~~
!DIGITAL VIDEOI
DVD.
VI 0 EO
WJo~~
DIGITAL AUDIO
TEXT
I
I
Please read before using this equipment.
MANUAL DE OPERACION
Leealo antes de utilizar equipe.
MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
ALPINE ELECTRONICS MARKETING, INC.
1-7 Yukigaya-Otsukamachi, Ota-ku
Tokyo 145-0067, Japan
Tel.: 03-5499-4531
ALPINE ELECTRONICS OF AUSTRALIA PTY, LTD.
161-165 Princess Highway, Hallam
Victoria 3803, Australia
Tel.: 03-8787-1200
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place
Torrance, California 90501 U.S.A.
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Strase 1-3
80807 MOnchen, Germany
Tel.: 089-32 42 640
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 51 O-B6,
1930 Zaventem, Belgium
Tel.: 02-725 1315
ALPINE ELECTRONICS OF U.K., LTD.
ALPINE House
Fletchamstead Highway, Coventry CCV4 9TW, U.K.
Tel.: 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de Ia Belle Etoile, Z.l. Paris Nord II,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Tel.: 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sui Naviglio (MI), Italy
Tel.: 02-484781
ALPINE ELECTRONICS DE ESPANA, S.A.
Portal de Gamarra 36, Pabell6n, 32
01013 Viloria (Aiava)-APDO 133, Spain
Tel.: 945-283588
Designed by Alpine Electronics of America, Inc.
Printed In China
WARNING
~WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only
be performed after coming to a complete stop. Always stop the
vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead
of the vehicle and cause an accident.
~CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT
WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity
(+ and -) as instructed. Rupture or chemical leakage from the
battery may cause fire or personal injury.
CAUTION
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of player)
~ PRECAUTIONS
Product Cleaning
Doing so may result in an accident, fire or electric shock.
Use a soft dry cloth for periodic cleaning of the product. For
more severe stains, please dampen the cloth with water only.
Anything else has the chance of dissolving the paint or damaging
the plastic.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Temperature
DO NOT DISASSEMBLE OR ALTER.
(Check with your dealer if you are not sure.) Failure to do so
may result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock. [f the fuse(s)
blows more than once, carefully check all electrical connections
for shorted circuitry. Also have your vehicle's voltage regulator
checked.
Do not operate your unit in ambient temperature above +70°C
(+ 158°F) or below -20°C (-4°F).
Moisture Condensation
You may notice the disc playback sound wavering due to
condensation. If this happens, remove the disc from the player
and wait about an hour for the moisture to evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs.
Playing a bad disc could severely damage the playback
mechanism. Do not attempt to load more than one disc at a time.
Maintenance
Doing so may cause heat to build up inside and may result in fire.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Characteristics of LCD Panel
Use for other than its designed application may result in fire,
electric shock or other injury.
• After turning the system off, a slight ghost of the image
will remain temporarily. This is an effect peculiar to LCD
technology and is normal.
• Under cold temperature conditions, the screen may lose
contrast temporarily. After a short warm-up period, it will
return to normal.
• The LCD panel is manufactured using an extremely high
precision manufacturing technology. Its effective pixel ratio
is over 99.99%. This means that 0.0 I% of the pixels could be
either always ON or OFF.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER
CANNOT WATCH TVNIDEO UNLESS THE VEHICLE IS
STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous (and illegal in many states) for the driver to
watch the TV/Video while driving the vehicle. The driver may be
distracted from looking ahead and an accident could occur. [fthe
product is not installed correctly, the driver will be able to watch
the TV/Video while driving the vehicle and may be distracted
from looking ahead causing an accident. The driver or other
people could be severely injured.
2-EN
Using Wireless Headphones
If ACC or the monitor's power source is turned off, a loud noise is
produced through the headphones. Be sure to remove the wireless
headphones from your ears before you turn the monitor off.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into
the player by the automatic reloading mechanism. Do not attempt
to insert a disc into the unit when the unit power is off.
Getting Started
Overhead Monitor
Basic Operations
~
DiscTslot
~:::::::::=:=========-~3
Left Side of Overhead Monitor
IR Transmitter
and Receiver
LCD Monitor Panel
Irlf~;I-,1~
Source Select
DVD Control
Stop
FM Modulator
iJJE~~~~TI----
,(
Fast Rewind
Front Control Keys
POWER
MUTE
Front Passenger
Play/Pause and Power
Dome Light Switch
MONITOR
CB
Panel Open Button
DEVICE
[~EJ
6
:C::5l
~·---··" ~-~.!
~-:-:-.,-:---cr---~-11+--
DVD, AUX1,
AUX2
Front Control Keys
~[~~§M)'
This is a I 0.1 inch, Wide SVGA, Active Matrix LCD with LED
backlight.
I
I
LCD Monitor Panel
DIMMER
Picture Mode
MONITOR SETUP
Remote Control
Panel Open Button
Press the Panel Open Button to release the Monitor Panel. The
Panel will drop down slightly allowing you to fully open to its
90 degree or greater position. To close, firmly press the LCD
Monitor Panel back up into the housing until a click is heard.
White LED Dome Light
White LED Dome Light illuminates when the Dome Light
Switch is on or when triggered by the vehicle door (if connected).
Front Control Keys
White, back-lit button illuminates when the overhead monitor
main power is on. DVD overhead monitor and other devices can
be controlled by using these buttons.
Front Passenger Control Buttons
[ FM I: FM modulator ON/OFF switch
The audio is transmitted to the radio's FM Tuner, when FM button
is on. The radio must be tuned to the proper frequency. The FM
transmitter function in the System menu must be ON to use the
FM modulator.
[ ~ I II
I: Play/pause and power switch
The front passenger can play/pause the DVD. It also allows
turning on the unit. The unit can be turned off by pressing and
holding this switch.
Dome Light Switch
Dome light switch turns on/off the dome light. When the switch
is set to Door, the dome light turns on when the door is open.
Turning Power ON/OFF
The power state of the monitor is memorized when Ignition/ACe
is turned off. When Ignition/ACC is turned back on, the monitor
returns to the memorized power state (either ON or OFF),
including DVD playback position.
Front Control Keys
• Press POWER (
6 ) to turn ON the monitor.
• To turn off power, press and hold POWER (
6)
again.
• While the power is ON. press POWER (
function.
6) to activate the Mute
Remote Control
• Press POWER to turn ON and OFF
Front Passenger Controls
• Press PLAY/PAUSE button to turn ON.
• To turn off the power, press and hold PLAYI
PAUSE.
PLAY/PAUSE
IR Transmitter and Receiver
TR transmitter sends the sound to the Headphone. TR receiver
receives the signal from the remote control. The Infrared Wireless
Headphone Transmitter and Remote Control Receiver are located
in front of the unit.
Eject Button
Pressing Eject button unloads Disc.
3-EN
Loading and Unloading Discs
Tum on the power before loading and unloading discs.
Loading discs
1
2
Switching the Source
Front Control Keys
1
Once the disc is partially inserted, it is drawn in
Press SELECT (
will ) to display the Source Select
Menu.
Insert the disc with the label side facing upwards.
2
Press SELECT ( will ) again to cycle through the
different sources.
automatically. Playback starts.
Remote Control
Press DVD, AUX1 or AUX2 to change each source
directly.
• For two-sided DVDs, play one side of the disc to the end, then
unload the disc, turn it over and reload it to play the other side.
• If wrong disc, upside-down discs or dirty discs have been
inserted, "Bad Disc " is displayed. Press ~ and eject the disc.
Press~.
Be sure to remove the disc.
• OSD (On Screen Display) will turn OFF automatically after 5
seconds without use.
• When the source is changed, the power is turned OFF or the ACC
is turned OFF, the device remembers the scene where the internal
DVD stopped and playback will resume from that point.
sening the Backlight Brightness
1
Press Dimmer ( • ) on the Front Control Keys,
the DIMM button on the remote control, or select
the Backlight tab in the Picture Settings Menu
(refer to Monitor Setup instructions page 5}.
2
From the Picture Settings menu, press <Ill or
~
to
cycle through High/Mid/Low.
• If the disc is not removed within a few moments,
it will be
reloaded automatically.
• During ACC OFF or while the disc is being loaded ("LOADING"
is displayed), the disc will not be ejected even if you press ~.
Dimmer
Muting the Audio
CIT:£)~ ~$9 CLJ:W OKIRJ
Front Control Keys
Front Control Keys
While the power is ON, press POWER ( <!)) to activate
Wait 8 seconds until OSD disappears; the
the Mute function.
adjustment will be saved automatically ( if
Press POWER ( <!) ) again to turn OFF the Mute
the brightness is adjusted directly using the
function.
Dimmer ( • ) key on the Front Control Keys, the
OSD will disappear after 3 seconds)
Remote Control
Press MUTE to turn it ON and OFF.
Adjusting the Volume
Volume can be controlled from the headphone or your own radio
volume function.
1
2
DVD Control
Press the DVD button on the Front Control Keys to
access the DVD Control menu.
DVD CONTROL
Turn on POWER on the headphone.
Adjust the volume level by turning clockwise for
louder and counter-clockwise for lower on the
headphone.
• Refer to the "Wireless Headphones" section on page 6 for
additional information.
4-EN
EJ~[£,][i]EJ
~~~EJB
CD000000000
DVD Setup
Picture SeHings
Press and hold the DVD button or press the DVD
SETUP
Setup button on the DVD Control screen to enter
... ~
( Backlight
the DVD Setup menu to adjust Language, Video,
l-41
..
press and hold the Menu button on the remote
(con,,..,
I
( erightne5s
I
{ COlor
{ 11n1
control to access the DVD Setup menu.
•!Language
~~
G1
GJ
GJ
G1
I
I
I
I
I
I
English
Subtitle
OFF
Audio
Audio
English
Rating
DV D menu
English
Video
•I
( Pieture ~oda l<4
Audio, Rating and Misc. settings. You may also
!Language
~~
Refer to "Setting the Backlight" section on page 5
for detailed instructions.
Mise
From the Picture Settings menu, press <1111 or 11> to
cycle through High/Mid/Low.
Monitor Setup
Picture Mode, brightness, color, tint and contrast are adjustable.
To access the Settings menus, press and hold the
Dimmer
m::u~ ~$1 Ci:IEDCLn:J
Front Control Keys
DIMMER ( • ) button on the Front Control Keys
for at least 2 seconds and then press <1111 or II> to
select the Picture Settings, Screen Settings, or
To change the Picture Mode, press<llll or II> to cycle
System Settings menus.
through the OSD and select from STANDARD,
You may also press the SETUP button on the
VIVID, CINEMA, SPORT and GAME. (Default:
remote control to access these menus.
STANDARD)
Dimmer
,......,<!>....,l-_........,,d-rm
~$9 CTJbiJI o lo
CINEMA
Front Control Keys
If any of the picture settings (Contrast, Brightness,
MONITOR
(IJ [M~EJ
DEVICE
Color, and Tint) of any mode are adjusted,
6
"CUSTOM" mode will be created and set as the
'[ 5"1
new value.
SETUP
Remote Control
Wait 8 seconds until OSD disappears; any
adjustments will be saved automatically.
Adjusting the,~trast!Brightnes5/Color/Tint
Press
~
or ~ to select the desired setting.
Press
<1111
or II> to adjust the chosen setting. Each
setting can be adjusted from -7(MIN) to +7(MAX).
Resettingithe Picture Settings
Press
~ or~
until "Picture Reset" is selected.
Press ENTER to reset all picture settings to their
factory default values. This will only reset the
current Source Setting (DVD, AUX 1 or AUX 2).
5-EN
Screen SeHings
Wireless Headphones
SETUP
~
..1
SCREEN
I•
~
1...
WIDE
...
TV System
<1111
AUTO
IJo
Screen N&me
<C
( been Mode
I
Headphone Receivers
IJo
•J
jRe~Conllol j <lllll
Display mode on the screen can be adjusted to Wide,
Cinema or Normal. (Default: WIDE)
1)
Battery Cover
The Video Signal Standard (TV System) can be
2)
3)
Volume Control
Power Switch
manually switched.
4)
Power Indicator LED
• Press .._ or
~
to select WIDE/CINEMA/NORMAL
• Press .._ or ~ to select AUTO/NTSC/PAL
{Default: AUTO}
Operation
Read carefully to prevent damage to the headphone or
your ears:
System sening
WAR.NING: Before turning on the power, remove headphones and turn
the volume down as low as possible.
The IR transmitter, FM modulator and frequency can be adjusted
1)
Be sure the batteries are properly installed in the
headphones.
2)
Turn the headphones volume completely down before
placing it on your ears and turning on the power.
3)
Turn on the headphone power and adjust the
headphone volume to a comfortable level (You can
increase the audio source volume if needed).
for all available sources.
S ETUP
~
( IA Transminer
..l-4~·
11
•I
( FM Transm olle<
l-4
j FM Frequency
I <~~
~
B
OFF
•J
--.- MHZ • J
FIICioryAeset
Bauerv Installation
Settiag tb~·- IR· f~fUUlRtitter
Press .._ or
~
Place two AAA batteries into the battery compartment of the
headphone(s), making sure that the battery polarity is correct.
to select AlB/OFF. (Default: A)
CHANNEL A : 2.3 MHz/ 2.8 MHz
CHANNEL B : 3.2 MHz/ 3.8 MHz
Setting·the F.Ml ModL!I~t9r. ::ji ....
Press .._ or ~ to select FM Radio region
(OFF/USA/OTHERS). (Default: OFF)
Setting the FM Frequency.
Press .._ or
~
to select desired FM Radio
Frequencies between 88.1 MHz to 92.1 MHz.
(Default: 89.1 MHz)
USA f requency step is 0.2MHz and other countries is O. IMHz.
Resetting to the Factory Default
Press ENTER Key, the system changes to Factory
Default System Setting. Entire settings include
Picture, Picture Mode, Display Mode are also reset.
DVD Setup values will not be affected.
6-EN
Note
If ACC or the monitor's power source is turned off,
a loud noise is produced through the headphones.
Be sure to remove the wireless headphones from
your ears before you turn the monitor off.
Accessories
Specifications
Check accessory parts.
Video Display System NTSC/PAL Compatibility
AV Connector 1
Power Connector
AuxOut
DISPLAY SCREEN
Size
Width
Height
Aspect Ratio
Type Transparent type TN
RUE-4159 Universal
Remote Control
SHS-N106 Single
Source Fold -Flat
Wireless Headphone
Installation Bracket'1
System
Number of Elements
Effective Number of
Elements
Back Light
10.1"
221mm (8.70")
132mm (5.20")
16:9
Liquid Crystal Display
TFT-LCD, Active Matrix
1024(W) X 600(H) X 3
1.84M Pixels 0/'JSVGA)
99.9% or more
LED
GENERAL
Operating Voltage
Power Consumption
X2
Trim Ring
Screws (for
Installation Bracket)
Screws (for Trim Ring)
<> ~~
X4
AAA Battery
FM Switching Box
FM Modulator
X5
Operating Temperature
Quick Start Guide,
Installation Manual,
Registration Card
0
Video Input
Audio Input
IR Transmitter
MONITOR
0
Sold Separately
10 -16VDC
(Typical: 12V)
2.35A (MAX)
1.60A (TYP)
140mA (Stand by)
1.0V p-p 75ohm
2.0V rms (max)
CH A: 2.3MHz I 2.8MHz
CH B: 3.2 MHz I 3.8MHz
88.1 MHz - 92.1 MHz
PLL Frequency
Synthesizer
-4 'F to +158 'F (-20 'C
to+ 70'C)
Width
Depth
Height (LCD Panel Closed)
Height (LCD Panel Open)
Weight
290 mm (11 .42")
290 mm (11 .42")
45 mm (1.7")
204.2 mm (8.04")
2.270 Kg (5.01bs)
X6
TMX-R3300DVD Overhead
Monitor
Wireless Transmitter Wire
Note
For more detailed information or instructions
about how to use the PKG-RSE3DVD, please
visit Alpine's web site to download the complete
Owner's Manual.
Top
interchangeable
cover
Right side
interchangeable
cover
,
I!
//lr
~
X3
X3
Left side
interchangeable
cover
Rear
interchangeable
cover
~
t,/1
Manufa ctured under license from Dolby Laboratories .
Dolby and the double- D symbol are tradema rks of Dolby Laboratories.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights . Use of this copyright protection technology
must be authorized by Rovi Corporation , and is intended for
home and other limited viewting uses only unless otherwise
authorized by Rovi Corporation . Reverse engineering and
disassembly are prohibited.
II
l)riff'
jJ
X3
X3
(Black, Gray and Tan colored covers)
1-EN
DVD Entertainment System
PKG-RSE3DVD
INSTALLATION MANUAL
illJo§~
III DOLBY. wo§@
DIGITAL
!DIGITAL VIDEO)
DIGITAL AUDIO
VIDEO
I
TEXT
I
Please read before installing this equipment.
MANUAL DE OPERACION
Leealo antes de utilizar equipe.
MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
ALPINE ELECTRONICS MARKETING, INC.
ALPINE ELECTRONICS OF AUSTRALIA PTY, LTD.
ALPINE ELECTRONICS FRANCE S.A.R.L.
1-7 Yukigaya-Ot sukamachi, Ot a-ku
Tokyo 145-0067, Japan
Tel.: 03-5499-4531
161 -165 Princess Highway, Hallam
Victoria 3803, Australia
Tel.: 03-8787-1200
ALPINE ELECTRONICS OF AMERICA, INC.
ALPINE ELECTRONICS GmbH
(RCS PONTOISE B 338 101 280)
98, Rue de Ia Belle Etoile, Z.l. Paris Nord II,
B.P. 5001 6, 95945 Roissy Charles de Gaulle
Cedex, France
Tel.: 01-48638989
19145 Gramercy Place
Torrance, California 90501 U.S.A.
Tel.: 1-800-ALPINE-1 (1 -800-257-4631)
Wilhelm-Wagenfeld-Strase 1-3
80807 Mlinchen, Germany
Tel. : 089-32 42 640
ALPINE ELECTRONICS (BENELUX) GmbH
ALPINE ELECTRONICS OF U.K., LTD.
Leuvensesteenweg 510-8 6,
1930 Zaventem, Belgium
Tel. : 02-725 1315
ALPINE Ho use
Fletc hamst ead Highway, Coventry CCV4 9TW, U.K .
Tel. : 0870-33 33 763
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sui Naviglio (MI), Italy
Tel.: 02-484781
ALPINE ELECTRONICS DE ESPANA, S.A.
Portal de Gamarra 36, Pabell6n, 32
01013 Vil oria (Aiava)-APDO 133, Spain
Tel.: 945-283588
Designed by Alpine Electronics of America, Inc.
Printed In China
Installation and Connections
Before installing or connecting the unit, please read the
following thoroughly for proper use.
it Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL
& Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other
than designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
Failure to do so may result in electric shock or injury due to
electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal,
use a rubber grommet to prevent the wires insulation from being
cut by the metal edge of the hole.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct
or hang up on places such as the steering wheel, gear lever, brake
pedals, etc., can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes, fuel
lines, tanks or electrical wiring. Failure to take such precautions
may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any
other safety-related system), or tanks should NEVER be used
for installations or ground connections. Using such parts could
disable control of the vehicle and cause fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL
OR SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement, etc.,
and result in a serious accident.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit
may result in product failure.
Precautions
• Be sure to disconnect the cable from the (- ) battery post before
installing your PKG-RSE3DVD. This will reduce any chance
of damage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to
the diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical system,
be aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for
this unit. When connecting the PKG-RSE3DVD to the fuse
box, make sure the fuse for the intended circuit of the PKGRSE3DVD has the appropriate amperage. Failure to do so may
result in damage to the unit and/or the vehicle. When in doubt,
consult your ALPINE dealer.
• The PKG-RSE3DVD uses female RCA-type jacks for
connection to other units (e.g. AV head unit) having RCA
connectors. You may need an adaptor to connect other units.
If so, please contact your authorized ALPINE dealer for
assistance.
IMPORTANT
CAUTION
,-------------------------~
CAUTION-Laser radiation
when open, DO NOT STARE
INTO BEAM
Please record the serial number of your unit in the space
provided below and keep it as a permanent record. The serial
number plate is located on the bottom of the unit.
SERIAL NUMBER: - - - -- - - -- - - INSTALLATION D A T E : - - - - - - - - -- INSTALLATION TECHNICIAN: - - - - - - - PLACE OF PURCHASE: - -- - -- -- - -
2-EN
Installing the Overhead Monitor
1 Install the metal installation bracket to the ceiling.
Optional
M4 Tapping Screws
(Not included: screw
4 screws will be used to attach the bracket to the ceiling.
The protruding screw holes should be facing down, away
from the ceiling. Ensure that the bracket is affixed to the roof
supports behind the headliner and exercise caution to avoid
drilling into the roof of the vehicle.
~
Mounting Bracket
~""''
Front
length depends on vehicle)
---:
M
n,· ~i
~[ ;
! --:-:\
JT"j/
~"""
M4 x 13 Machined Screws (4)
(Included)
2
Install trim ring before attaching the overhead
monitor to the metal installation bracket.
Install the top interchangeable color cover.
Open the monitor lid.
Attach the cover to the monitor from the front (side facing
the panel open button).
Push the sides of the cover into place.
Close the monitor lid and push the back of the cover into
place.
Trim Ring is used to make the monitor suitable to your vehicles
ceiling shape at the time ofinstalling the monitor. Ask ALPINE
dealer for detail.
Screw the shroud to the monitor body using the provided screws.
4
Install the overhead monitor to the ceiling.
Connect the cables and then install 4 screws to the metal
installation bracket.
Rear screw holes
3
Install both side panels of the interchangeable
color covers.
Align and insert the notches on the panels into the grooves
on the monitor body.
Slide the cover in the direction towards the front control keys
at the front of the unit and snap the notch into place. A click
should be heard.
Front screw holes (underneath LCD screen)
(Left rear screw not illustrated)
3-EN
5
Install the rear interchangeable color cover.
Align the openings on the cover with the rear button panel.
Press down firmly to snap the cover into place.
Ensure that all notches have gone into their grooves
properly.
Removing Interchangeable Color Cover
1 Remove the rear interchangeable color cover.
Reach across the monitor body and grasp the rear panel.
Gently lift the panel until it snaps off from the body
2
Remove both side panels of the interchangeable
color covers.
Grasp side cover as illustrated.
Raise the corner touching the rear control panel a few
millimeters and gently slide the cover out.
Do not immediately lift the cover before sliding it. The
notches will be damaged.
A small flat screwdriver or similar tool can be used to raise the
corner of the panel.
4-EN
3
Remove the top interchangeable color cover.
Exercise caution when removing the top plate.
- The LCD screen must be closed during removal.
- Begin removal from the rear of the panel (side facing the
3 button panel).
- Removal by hand or by using soft tools is recommended
as hard tools may scratch the panel surface.
- Grasp the cover by the indentations and pull gently until
the cover snaps off from the LCD screen.
Connections
ALPINE's PKG-RSE3DVD needs the following power
connections to assure proper operation of the monitor.
Power Connector
1) BATT
Yellow
• Battery Lead
Connect this lead to the positive(+) post of the vehicle's battery.
2)ACC
Red
• ACC
Connect this line to the vehicle's ACC line.
(Switched 12V, ignition)
3) GND
Black
• GND
Connect this line to the vehicle's GND line.
4) DOOR
Green
• Door
Connect this lead to the vehicle door
(polarity selectable, see following page)
AV Connector 1
AUX IN 1 (VIDEO)
Yellow
• Video Input Connector
Connects to the video output of other video products.
AUXIN 1 (AUDIO L)
White (L)
AUXIN 1 (AUDIO R)
Red (R)
REMOOUT
White/Brown
• Audio Input Connectors
Connects to the audio output of other video products.
• Remote Out
To control ALPINE DVD player, TV tuner or AV head unit, connect
to each REMOTE IN.
REMOTE IN
White/Brown
• Remote In
To control ALPINE PKG-RSE3DVD from AV head unit in the front
area of the vehicle, connect this line to the ALPINE DVD-HU or
LCD monitor REMOTE OUT.
AV Connector 2
r----nm:JQ[Q:l
AUX OUT (VIDEO)
Yellow
• Video Output Connector
Connects to the video inputs of other video products.
AUX OUT (AUDIO L)
White (L)
• Audio Output Connectors
Connects to the audio inputs of other audio or video
products.
AUX OUT (AUDIO R)
Red (R)
---------------------------------------------
5-EN
Mount Side
Dome Light
Poi~\~H~ch~=======~~
AV Connector 2
AV Connector 1
@
(Detail of dome light
polarity switch)
FM Switr.l11ina
Box Mini Plug
Wireless Tr.. nco.,niw... r
Wire
AV Connector Ports
Dome Light Wire
Dome light wire connects the built-in dome light to the
cable from the vehicle's dome light Switch.
Polarity change switch is located on the top surface
that mounts into the headliner.
Vehicle door polarity depends on the vehicle type. The
polarity can be changed by the "Door SW polarity"
switch. (Default: Negative Switched System)
Polarity+: When door open, door signal is 12V
Polarity-: When door open, door signal is GND
Polarity+
Vehicle
When the door is open ->
the door signal is 12
--- - -------
:Door Closed
'I
I
~~
1
Door Open
' ---------- -
PolarityVehicle
I
'
'
Door
I
I
I
When the door is open ->
the door signal is GND
I
----- - - - -- - '
Door Closed
I
~
1
Door Open
' ----- - - - - --
I
I
I
I
I
I
I
____FJ-J
~PKG-RSE3DYD
Vehicle Door SW
1
6-EN
~PKG-RSE3D~D
Vehicle Door SW
Door
(Detail ofAV
connector ports)
System Connections
AV Head Unit or
Secondary Monitor
101
ALPINE AV Head Unit
0
Q
~
~
[!J
101
~
f--3J=
Q
[!)
0
AUXOUT
,__®
,__"
®
,___
"
f--
~
J'
t5
0
_
,... ..,
A¥//~
REM. OUT [
AUXOUT
l~
REM. IN
REM.
IN
REM.
OUT1
AUX 1
IN
AUX 1
AUX Out to Secondary Monitor(s)
~
GAME PORT (=AUX2)
Camcorder
OR
PKG-RSE3DVD DVD
Overhead Monitor
Game Player
7-EN
IAttention Installers I IAtencion instaladores I lA I'attention des installateursl
CAUTION
,
PRECAUCION
MISE EN GARDE
POWER CONNECTOR
''
,'
I; '
------------- -~~'-~,
jjfJf{, '
(.$=" ~ )
CONECTOR DE ALIMENTACI6N EL£CTRICA
CONNECTEUR D~LI­
MENTATION
', F5 =
iif/21)2)
-
DO NOT ALLOW THE MOUNTING SURFACE TO CONTACT THE POWER CONNECTOR. PRESSURE
APPLIED TO THIS CONNECTOR WILL RESULT IN DAMAGE TO THE UNIT.
NO DEJE QUE LA SUPERFICIE DE MONTAJE TOQUE EL CONECTOR DE ALIMENTACION.
SI SE APLICA PRESION A ESTE CONECTOR PROVOCARA DANOS A LA UNIDAD.
NE PAS LAISSER LA SURFACE DE MONTAGE ENTRER EN CONTACT AVEC LE CONNECTEUR D~LIMENTATION.
UNE PRESSION APPLIQUEE SUR CE CONNECTEUR ENTRAINERA DES DOMMAGES A rUNITE.
ENGLISH
SPANISH
FRENCH
Mounting the unit directly to a
hard, flat surface (as shown above)
can result in permanent, irreparable damage to the unit and its
power connector.
El montaje de la unidad directamente sobre una superficie dura y
plana (como se ilustra arriba) puede
resultar en dafios permanentes
e irreparables a la unidad y a su
conector de alimentaci6n.
Installer I'unite directement sur une
surface dure et plane (comme illustre
ci-dessus) peut entrainer des dommages permanents et irreparables a
l'unite eta son connecteur d'alimentation.
El conector de alimentaci6n sobresale levemente del cuerpo del
monitor. Presion de la superficie de
montaje se transfiere a este conector, causando daiio al conector y a
su Iugar de montaje en la placa de
circuito.
Le connecteur d'alimentation depasse
legerement du chassis de lecran. La
pression de la surface d'installation est
transferee ace connecteur entrainant
ainsi des dommages au connecteur et
ason emplacement d'installation sur
la carte de circuits imprimes.
Siempre instale la unidad usando
el soporte metalico de montaje y el
anillo de refuerzo, de ser posible,
para evitar causar dafio al conector
de alimentaci6n.
Toujours installer l'unite en utilisant
les fixations metalliques et l'anneau
de bride, si possible, afin deviter les
dommages au connecteur d'installation.
Si el soporte metalico y el anillo
de refuerzo no se pueden usar,
aseglirese que la superficie a la cual
la unidad esta fija tenga una apertura suficientemente grande para
evitar contacto con el conector de
alimentaci6n.
Si les fixations metalliques et le
hauban ne peuvent etre utilises,
s'assurer que la surface sur laquelle
I'unite est posee est assez large pour
eviter le contact avec le connecteur
d'alimentation.
The power connector protrudes
slightly from the monitor body.
Pressure from the mounting surface is transferred to this connector causing damage to the connector and to its mounting location
on the circuit board.
Always mount the unit using the
metal mounting bracket and trim
ring, if possible, in order to avoid
causing damage to the power
connector.
If the metal bracket and shroud
cannot be used, ensure that the
surface to which the unit is affixed
has a large enough opening to
avoid contact with the power
connector.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement