S730DV
. . . light years ahead™
S730DV
Product
Specification
Description: Video and Universal Data
Description
Features
✔ 10-bit digital video transmission
✔ 560 TV lines resolution
✔ All-in-one data: RS232, RS422, RS485,
Manchester, Biphase, TTL
✔ Unique data translation function
✔ User-configurable data format
✔ Meets or exceeds EIA/TIA-250C medium haul
standard
✔ Signal-to-noise ratio >67 dB
✔ Maximum operating distance: 11 mi (18 km)
✔ Enhanced built-in diagnostics
✔ MTBF >100,000 hours
✔ 24 VAC/12-16 VDC transmitter power
✔ Forever Warranty™
The revolutionary new S730DV fiber link takes all the
guesswork out of ordering a video and data link. This
one link handles all major data formats in both directions
including SensorNet™ - it is not necessary to order or
stock different models to support different data formats.
Configure them as needed for the job and, if the installation changes data formats, just reconfigure the
S730DV. Also, the forward data path (from Tx to Rx)
can be set to function as a relay to transmit contact
activity at the camera back to the control center.
Digital transmission of the video component along with
a signal-to-noise ratio of > 67 dB assures clean, noisefree video at the receiver. Moreover, the S730DV supports all major video formats, including color,
monochrome, NTSC, PAL, and their many variations.
Resolution of greater than 560 TV lines guarantees
faithful reproduction of high-resolution closed-circuit
video images.
The use of state-of-the-art digital technology throughout
the S730DV makes it possible to build in more diagnoscontinued
Basic Model Description
S730DV-1
Single-fiber link uses two different wavelengths for two-way transmission.
S730DV-2
Two-fiber link transmits using 850-nm wavelength over separate fibers for two-way
communication.
S730DV-2L Two-fiber link for long-haul transmission using 1300-nm wavelength over separate fibers
for two-way communication.
For a complete list of available models, please refer to Table 1.
www.fiberoptions.com
Fiber Options 80 Orville Drive, Bohemia NY 11716-2533
[email protected]
US Tel: 631-567-8320 or 800-342-3748
Fax: 877-FiberFax (877-342-3732 toll free) or 631-567-8322
For international offices, see the back cover.
SERIES S730DV
Description continued
tic functions than ever before. The unit features LED
displays for video, optical signal, data in, data out, and
enable configuration. In addition, the integrity of the
data paths can be tested with a built-in data transmission test procedure; it is not necessary to hook up a
data source to test out the link.
The S730DV also features the very valuable data translation function that allows input of one data format and
output of a different format. (See DATA SIGNAL section inside.)
TECHNICAL INFORMATION
ELECTRICAL
Input Voltage:
Standalone transmitter:
Standalone receiver:
Rack modules:
24 VAC ± 10%
12 - 16 VDC
13.5 - 16 VDC
13.5 - 16 VDC
*For an explanation of the Power Factor, please see the
product specification for the 515R or 517R racks or the
Fiber Finder.™
Current Requirement:
650 mA
Rack Module Power Factor: 6*
Power Consumption:
8W
Heat Equivalent**:
0.5 Btu/min
0.1 cal/min
**This represents the conversion of all input power to heat.
The actual geat generated will be less.
VIDEO SIGNAL
Video performance exceeds the requirements of
EIA/TIA 250C medium-haul standard.
Number of Video
Channels:
1
Video Direction:
Tx Æ Rx
Standards Supported:
EIA, CCIR, NTSC, PAL
Video Input Signal:
1.0 V p-p nominal com
posite video.
Input Impedance:
Video Output Signal:
Output Impedance:
Signal-to-Noise Ratio:
Video Bandwidth:
Video Resolution:
Differential Phase:
Differential Gain:
75 Ω
1.0 V p-p composite
video, unity gain,
75 Ω
> 67 dB
7 MHz
>560 TV lines
0.7º
2%
VIDEO INTERCONNECTION
Recommended Maximum Distance
Video Equip. to Tx:
<100 ft (30 m)
Rx to Video Equip.:
<100 ft (30 m
2
Recommended Cable:
www.fiberoptions.com
RG59/U coaxial cable;
Belden No. 9259
SERIES S730DV
TECHNICAL INFORMATION
DATA SIGNAL
Number of Data
Channels:
Data Direction:
I/O Data Formats:
Baud Rate:
1
Tx ÅÆ Rx
RS232 (3-wire and 5-wire),
TTL, RS422, Manchester,
Biphase, Sensornet™,
RS485 (2-wire and 4-wire)
with 200 mV, 1 and 2 V off
sets & forward relay option
RS232 = 250 kbps
RS422 = 512 kbps
RS485 = 512 kbps
Manchester = 250 kbps
Biphase = 250 kbps
TTL = 512 kbps
Forward Data Format: Encoded with digital video
using 8B/10B encoding
Reverse Data Format: Frequency shift keyed (FSK)
Bit Error Rate:
<10-9
Data Translation: Allows translation from one format to another. Eliminates need for external translation
device. Physical translation only; no protocol interpretation. Manchester and Biphase excluded.
DATA INTERCONNECTION
Maximum Recommended Distance: The maximum distance from the CCTV control system components to
the fiber units is governed by the control system. Refer to the installation manual for the control system.
AGENCY COMPLIANCE AND MTBF
Emissions:
FCC Part 15, ICES-003,
AS/NZS 3548, EN55022
ENVS0204
EN61000-4-2, 3, 4, 5, 6, 11
Immunity:
FCC
Safety:
MTBF:
UL1950, CAN/CSA 22.2,
NO.950-95
>100,000 hours
PART 15
COMPLIANT
OPTICAL
Wavelength:
Optical Mode:
Optical Budget:
Operating Distance*:
S730DV-1:
S730DV-2:
S730DV-2L:
Refer to Table 1
Multimode
13 dB standard; higher
budgets available
Optical Gain Control:
3.2 mi (5.2 km)
3.2 mi (5.2 km)
11 mi (18 km)
*Operating distance is approximate and assumes best
fiber.It will be affected by the type and number of splices in
the fiber.
DIAGNOSTIC INDICATORS
Level/Loss™:
Video:
Emitter Type:
Fiber Type:
Modulation Type:
Bicolor LED
Bicolor LED
Transmitter Launch
Power:
Receiver Sensitivity:
Data Input:
Data Output:
Enable Configuration:
www.fiberoptions.com
LED
62.5 µm
Digital time division
(TDM) multiplexing
Optical automatic
(OAGC)
-15 dBm
-28 dBm
Bicolor LED
Bicolor LED
Bicolor LED
3
SERIES S730DV
TECHNICAL INFORMATION
ENVIRONMENTAL
Temperature Range
in Operation:
-40° to +167° F
(-40° to +75° C)
Temperature Range In Storage:
-40° to +185° F
(-40° to +85° C)
Humidity Range
in Operation
and storage:
0 to 95% relative,
noncondensing
MECHANICAL
Standalone Transmitter
Dimensions:
Length: 4.0 in (102 mm)
Width: 4.55 in (116 mm)
Height: 1.95 in (50 mm)
Weight:
0.75 lb (0.34 kg)
Shipping Dimensions: Length 5.7 in (145 mm)
Width: 4.6 in (117 mm)
Height: 2.2 in (56 mm)
Shipping Volume:
0.033 cu ft (0.001 cu m)
Shipping Weight:
0.85 lb (0.39 kg)
Construction:
Aluminum
Finish:
Black semigloss paint
Mounting Method:
4 No. 6 (3 or 3.5 mm)
screws
Standalone Receiver
Dimensions:
Weight:
Shipping Dimensions:
Shipping Volume:
Shipping Weight:
Construction:
Finish:
Mounting Method:
Rack Modules
Module Width:
Weight:
Shipping Dimensions:
Shipping Volume:
Shipping Weight:
Finish:
Video:
Data:
Length: 10.5 in (267 mm)
Width: 7.0 in (178 mm)
Height: 2.0 in (51 mm)
0.085 cu ft (0.002 cu m)
1.6 lb (0.73 kg)
Aluminum
Black textured
semigloss paint
4 No. 6 (3 or 3.5 mm)
screws
1 slot, 1.0 in. (25.4 mm)
0.55 lb (0.25 kg)
Length: 9.9 in (250 mm)
Width: 5.4 in (140 mm)
Height: 1.1 in (28 mm)
0.034 cu ft (0.001 cu m)
0.70 lb (0.32 kg).
Black semigloss paint
OPTIONS
CONNECTORS
Optical:
Length: 9.31 in (236 mm)
Width: 6.33 in (161 mm)
Height: 1.15 in (29 mm)
1.36 lb (0.61 kg)
ST type standard;
others available on
special order
BNC
8-position detachable
screw terminal
Power Supply:
CONTROLS
Data Format:
Alarm Disable:
Power Input:
Standalone modules:
4-position detachable
screw terminal
Rack modules plug directly into the rack
See Table 1
Contact Closure:
www.fiberoptions.com
16-position rotary switch
Jumper allows alarm
output to be disabled
(rack modules)
Jumper enables contact
closure (relay) function
4
SERIES S730DV
TECHNICAL INFORMATION
TABLE 1: Model Variations
Model
Number
Function
Enclosure
Type*
Fiber No. of Max.
Size Fibers Atten.
Wavelength
Power Supply
Model
S730DVT-EST1
Transmitter
4X4X2
62.5
1
13
850/1300
615P or 24 VAC
S730DVR-EST1
Receiver
501R
62.5
1
13
850/1300
615P
S730DVT-EST2
Transmitter
4X4X2
62.5
2
13
850
615P or 24 VAC
S730DVR-EST2
Receiver
501R
62.5
2
13
850
615P
S730DVT-EST2L
Transmitter
4X4X2
62.5
2
13
1300
615P or 24 VAC
S730DVR-EST2L
Receiver
501R
62.5
2
13
1300
615P
Standalone Modules
Rack-Mount Modules
S730DVT-RST1
Transmitter
515R1, 517R1 62.5
1
13
850/1300
Powered by rack
S730DVR-RST1
Receiver
515R1, 517R1 62.5
1
13
850/1300
Powered by rack
S730DVT-RST2
Transmitter
515R1, 517R1 62.5
2
13
850
Powered by rack
S730DVR-RST2
Receiver
515R1, 517R1 62.5
2
13
850
Powered by rack
S730DVT-RST2L
Transmitter
515R1, 517R1 62.5
2
13
1300
Powered by rack
S730DVR-RST2L
Receiver
515R1, 517R1 62.5
2
13
1300
Powered by rack
**For exact dimensions, see the MECHANICAL sections.
FIGURE 1: OUTLINE DRAWING - S730DVR-E
FIGURE 2: SYSTEM DIAGRAM
video
data
5
S730DV-T
one or two fibers
S730DV-R
www.fiberoptions.com
video
data
. . . light years ahead™
S730DV
FIGURE 3: OUTLINE DRAWING - S730DVT-E
Product
Specification
THE FOREVER WARRANTY
Fiber Options, Inc. warrants that, at the time of shipment, the products manufactured by Fiber Options, Inc. will be free from defects in material and workmanship. Should any defects
appear in the product, Fiber Options, Inc. shall repair or replace the product or supply an equivalent, at its sole discretion. A Return Authorization (RA) number is required to send the unit
back in case return is necessary. Return shipments to Fiber Options, Inc. shall be at the buyer’s expense. Fiber Options, Inc. will return said equipment prepaid via best way.
THIS WARRANTY IS THE SOLE WARRANTY OF FIBER OPTIONS WITH RESPECT TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ANY AND ALL OTHER EXPRESSED OR
IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PURPOSE. THIS WARRANTY IS THE SOLE REMEDY AVAILABLE FOR
ANY CLAIM BASED ON AN ALLEGED DEFECT IN MATERIAL OR WORKMANSHIP WHETHER SUCH CLAIM ARISES IN CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE. FIBER OPTIONS SHALL NOT BE LIABLE IN ANY WAY FOR ANY CONSEQUENTIAL DAMAGE RESULTING FROM ANY DEFECT COVERED BY THIS WARRANTY.
Copyright 2001 by FIBER OPTIONS.
All rights reserved.
12-0730DV Rev A
010410
All specifications are subject to change without notice. Information furnished by FIBER OPTIONS
is believed to be accurate and reliable. However, no responsibility or liability is assumed by FIBER
OPTIONS for its use, nor for any infringement of patents or other rights of third parties which may
result from its use. No license is granted by implication or otherwise under any patent or other
rights of FIBER OPTIONS.
www.fiberoptions.com
80 Orville Drive, Bohemia NY 11716-2533
[email protected]
US Tel:
UK
Australia
France
Germany
Hong Kong
Latin America
Tel:
Tel:
Tel:
Tel:
Tel:
Tel:
631-567-8320
800-342-3748
+44 113 238 1668
+61 3 9370 9192
+33 01 60 86 54 53
+49 700 34237678
+852 2907 8108
800-342-3748
Fax:
Fax:
Fax:
Fax:
Fax:
Fax:
Fax:
631-567-8322
877-FiberFax (877-342-3732)
+44 113 253 8121
+61 3 9370 9936
+33 01 60 86 86 04
+49 36256 21991
+852 2142 5063
877-342-3732
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement