Emtek with Spring Rod Toilet Paper Holder Installation Instructions
Below you will find brief information for Toilet Paper Holder with Spring Rod. This Toilet Paper Holder is easy to install and has a spring-loaded rod that makes it easy to change the toilet paper roll. The toilet paper holder can be mounted to the wall using the provided screws and anchors. The holder is made of durable materials and is built to last.
advertisement
Toilet Paper Holder with Spring Rod - Installation Instructions
1
Make two marks on wall to locate center of mounting plates. Center to center spacing for mounting plates is 6 inches.
2 Mark three hole locations for mounting plate.
6”
3
Use a screw driver to install three Screw Anchors into the wall for each mounting plate. Install mounting plates on top of the Screw Anchors.
Attach with the sheet metal screws provided.
4 Slip trim plates and posts over the mounting plate stud. Tighten set screw at the base of each post with the allen wrench provided.
Screw Anchors
Installed
Screw Anchors
Shape of trim plate varies depending on style.
IN4-TOLPAPHRSNG REV. 11/16/04
advertisement
Key Features
- Spring loaded rod
- Easy installation
- Durable construction
- Wall mounted
- Simple design
Frequently Answers and Questions
How do I install the Toilet Paper Holder?
What tools do I need to install the Toilet Paper Holder?
How do I change the toilet paper roll?
Related manuals
advertisement