Artisan Technology Group D100 IMAQ D100 Camera Cable, D2504 IMAQ D2504 cable Installation Guide

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff at our full-service, in-house repair center

Instra

View

SM REMOTE INSPECTION

Remotely inspect equipment before purchasing with our interactive website at www.instraview.com

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins www.artisantg.com/WeBuyEquipment

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com

for more information on price quotations, drivers, technical specifications, manuals, and documentation

Contact us: (888) 88-SOURCE | [email protected] | www.artisantg.com

INSTALLATION GUIDE

IMAQ D100 C

AMERA

C

ABLE

This guide describes how to attach the IMAQ D100 family of digital camera cables to your image acquisition (IMAQ) device.

You can use the IMAQ D100 cable to connect your IMAQ device to your digital video camera and four trigger channels. Refer to your IMAQ device documentation for more detailed information on these signals.

Note Your camera receptacles or cables may appear different from those illustrated in this guide. Refer to the National Instruments Web site, http://www.natinst.com/imaq , for the latest information on using different cameras and cables with your IMAQ device.

What You Need to Get Started

To install your IMAQ D100 cable, you will need the following:

❑

IMAQ D100 cable

❑

IMAQ D100 Camera Cable Installation Guide

❑

Your IMAQ device and documentation

❑

Your computer

❑

Your digital camera

❑

IMAQ D2504 cable and documentation (optional)

❑

BNC cables for trigger signal connection (optional)

❑

Trigger signal source (optional)

IMAQ ™ is a trademark of National Instruments Corporation. Product and company names mentioned herein are trademarks or trade names of their respective companies.

3

71868A-01

© Copyright 1998, 1999 National Instruments Corp. All rights reserved.

March 1999

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Installation

Triggering

As shown in Figure 1, insert the 100-pin SCSI-type connector end of the

IMAQ D100 cable into the external 100-pin SCSI-type receptacle of your

IMAQ device, ensuring correct polarity. Tighten the thumbscrews as necessary.

Insert the camera connector end of the IMAQ D100 cable into the receptacle of your camera, ensuring correct polarity. Tighten the thumbscrews as necessary.

If you plan to connect external trigger signals to your IMAQ device, you can use either the IMAQ D2504 cable or your own trigger interface cable.

If building your own cable, see Figure 2 for pin-out information. For more information on the D2504 cable, see the IMAQ 2504 Cable Installation

Guide.

Insert the trigger interface cable into the trigger connector of the D100 cable, ensuring correct polarity. Tighten the thumbscrews as necessary.

IMAQ D100 Cable Installation Guide 2 © National Instruments Corporation

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1

2

6

To Triggers

8

7

6

5

4

1 Trigger Connector

2 IMAQ D2504 Cable

3

3 Digital Camera

4 Camera Connector

5 D100 Cable

6 Thumbscrews

7 SCSI-Type Connector

8 IMAQ Device

Figure 1. Connecting the D100 Cable to Your IMAQ Device and Digital Camera

Unused

Reserved

Reserved

Reserved

Unused

Unused

Unused

Unused

Unused

Unused

GND

Unused

21

20

19

18

17

16

15

14

25

24

23

22

8

7

6

5

4

3

2

1

13

12

11

10

9

Unused

GND

GND

GND

Unused

Unused

Unused

Unused

Unused

TRIGGER3

TRIGGER2

TRIGGER1

TRIGGER0

Figure 2. D100 Cable Trigger Connector Pin Assignments

© National Instruments Corporation 3 IMAQ D100 Cable Installation Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff at our full-service, in-house repair center

Instra

View

SM REMOTE INSPECTION

Remotely inspect equipment before purchasing with our interactive website at www.instraview.com

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins www.artisantg.com/WeBuyEquipment

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com

for more information on price quotations, drivers, technical specifications, manuals, and documentation

Contact us: (888) 88-SOURCE | [email protected] | www.artisantg.com