MRC STA-V5K Motorized Vertical Stand, Up to 500kg Operation Manual
Below you will find brief information for Motorized Test Stand STA V5K. The STA V5K is a motorized test stand designed for HP Digital force gauges and NK Analog force gauges. It features stepless timing, manual and automatic control, test number or test time control, an LED screen, overload protection, and a high-quality motor. The stand can be used for tension/compression, insertion/withdrawal, fatigue testing, and fracture testing. It is widely used in various fields, including hardware, automobile components, plastics, light industry, wires, cables, rubber, machinery, electronic lines, colleges, science, and scientific research.
advertisement
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION
3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 [email protected]
MRC.VER.01-5.11
1. Function
STA Motorized Test Stand are special designed for HP Digital force gauge and NK Analog force gauge. They with step less timing, manual and automatic controller, test number or test time controller, LED screen shows, overload protected, high quality motor advantages. They are easy operation and widely use for tension/compression, insertion/withdraw, fatigue test and fracture test, such as in the field of hardware, automobile component, plastic, light industry, wires, cables, rubber, machinery, electronic line, college, science, science research and so on.
2. Paremeter
Capacity: 5000 N ；
Range: 220 mm ；
Test speed: 30~240 mm/min ；
Dimension: 410*260*1000(mm) ；
Net weight: 75 Kgs ；
Gross weight: 85 Kgs ；
Counter function: set cycle 9999 times ；
Signal output: reach setting value, test stand stop working ；
Safty: Voltage overload protect ， position-limit protect, auto stop protect
when external overload ；
Power: AC 220V
3. Counter manual
Lower of counter is digi display screen, show test numuber, upper of counter is preset number, most can set 9999 times, test stand up and down one time, the number add one ， when test time equal to preset number ， test stand will stop working automatic ， it is widely use for fatigue test 。 If want to test again, please press STOP key.
4. Force gauge method of installation
Use the 4 pcs M4 screws with the force gauge to install the force gauge to the fixing board, and please make sure the force gauge rod is vertical, then lock the M4 screws.
5 ． Special function
When HP series digital force gauge match to STA motorized test stand with a special signal cable, it will have a special function. Set the digital force gauge CPDT as a certain value, for example, if your force gauge is HP-500, and you want to test a sample as 250N, but you only want to know is it can endure 250N, don’t want to destroy the sample.
Then when the force reach 250N, the digital force gauge will send out a
signal to STA, then STA will stop working, this function not only can protect the sample, but also can protect the load cell of digital force gauge.
advertisement
Key Features
- Stepless timing
- Manual and automatic control
- Test number or test time control
- LED display
- Overload protection
- High quality motor
- Wide range of applications
- Easy operation
Frequently Answers and Questions
What is the capacity of the STA V5K?
What is the range of the STA V5K?
What are the different types of tests the STA V5K can perform?
What is the power supply for the STA V5K?
Can the STA V5K be used with HP Digital force gauges?
Related manuals
advertisement