SGM G-Profile lighting User manual
SGM 80021010 is a professional lighting fixture designed for use in stage, theatre, television, and architectural applications. It features a powerful LED engine that produces a bright, even beam of light, and a variety of advanced features that make it a versatile and easy-to-use fixture.
The 80021010 offers a wide range of color temperature and color rendering options, making it suitable for a variety of applications. It also features a built-in dimmer and strobe effect, and a variety of gobos and effects that can be used to create a wide range of looks.
advertisement
Manual_G_Profile_EN_170x113,3.book Page 1 Friday, March 13, 2015 8:52 AM
G‐PROFILE
MOVING HEAD
Manual_G_Profile_EN_170x113,3.book Page 2 Friday, March 13, 2015 8:52 AM
Dimensions
805
(31.7)
646
(25.4)
494
(19.5)
270°
135°
144
(5.7)
270°
Min. c/c
764
(30.0)
664
(26.2)
492
(19.4)
135°
327
(12.9)
821
(32.3)
340
(13.4)
370
(14.6)
470
(18.5)
16 (0.63)
37 (1.46)
Measurements in millimetres and inches (in brackets).
Drawing not to scale.
2
Manual_G_Profile_EN_170x113,3.book Page 3 Friday, March 13, 2015 8:52 AM
G‐PROFILE
USER MANUAL
© 2015 SGM ® . Information subject to change without notice. SGM and all affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this manual.
The SGM logo, the SGM name and all other trademarks in this document pertaining to services or products by SGM or its affiliates and subsidiaries are trademarks owned or licensed by SGM or its affiliates or subsidiaries.
The original edition of this document is in English. All other language editions are translations of the original edition.
This edition applies to firmware version 1.30 or later.
Ver. A
3
Manual_G_Profile_EN_170x113,3.book Page 4 Friday, March 13, 2015 8:52 AM
Contents
4
Manual_G_Profile_EN_170x113,3.book Page 5 Friday, March 13, 2015 8:52 AM
5
Manual_G_Profile_EN_170x113,3.book Page 6 Friday, March 13, 2015 8:52 AM
6
Manual_G_Profile_EN_170x113,3.book Page 7 Friday, March 13, 2015 8:52 AM
Safety information
WARNING! Read the safety precautions in this section before unpacking, installing, powering or operating this product.
The G-Profile is intended for professional use only. It is not suitable for household use. Impropre a l’usage domestique.
Review the following safety precautions carefully before installing or operating the fixture.
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Ce produit doit être installé selon le code d’installation pertinent, par une personne qui connaît bien le produit et son fonctionnement ainsi que les risques inhérent.
Preventing electric shock
WARNING! Risk of electric shock.
•
•
•
•
•
Always power off/unplug the fixture before removing covers or dismantling product.
Ensure that the mains power is off when wiring the fixture to the AC mains supply.
Ensure that the fixture is electrically connected to earth (ground).
Do not apply power if the fixture is in any way damaged.
Do not immerse the fixture in water or liquid.
7
Manual_G_Profile_EN_170x113,3.book Page 8 Friday, March 13, 2015 8:52 AM
Preventing burns and fire
WARNING! Take measures to prevent burns and fire.
•
•
•
•
Install in a location that prevents accidental contact with the fixture.
Install only in a well-ventilated space.
Install at least 0.3 m (12 in.) away from objects to be illuminated.
Install only in accordance with applicable building codes.
•
•
•
•
Ensure a minimum clearance of 0.1 m (4 in.) around the cooling fans.
Do not paint, cover or modify the fixture.
Keep all flammable materials away from the fixture.
Allow the fixture to cool for 15 minutes after operation, before touching it.
CAUTION: Exterior surface temperature after 5 min. operation = 55° C (131° F). Steady state = 65° C (149° F)
8
Manual_G_Profile_EN_170x113,3.book Page 9 Friday, March 13, 2015 8:52 AM
Avoid personal injury
WARNING! Take measures to prevent personal injury.
•
•
•
•
Do not look directly at the light source from close range.
Take precautions to prevent injury when working at height.
Ensure that the fixture is always securely fastened with suitable hardware.
For elevated installations, secure the fixture with suitable safety cables, and always comply with relevant load dimensioning, safety standards and requirements.
9
Manual_G_Profile_EN_170x113,3.book Page 10 Friday, March 13, 2015 8:52 AM
Overview
The SGM G-Profile model is a framing version of the G-Spot Moving Head.
The G-Profile is a maintenance free, multi-environmental fixture with an IP-rating of 65. It has a powerful LED light source, and a virtually unlimited color palette, four individually controllable framing blades, and can easily be controlled by wired and wireless DMX. The fixture also offers RFID and NFC, low power consumption and an expected lifetime of the multiple LED’s of 50,000 hours*.
C
E
D
A
F
A : Pan lock
B : Tilt lock
C : Yoke handle
D : Base handle
E : Head fan grill (one of two shown)
F : Display panel
G : Safety wire attachment point
H : Fuse
I : DMX in
J : DMX out
K : Power in
L : Power cord
H
L
I
* At 70% of luminous output under the manufacturer’s test conditions.
10
B
G D
K G
J
C
Manual_G_Profile_EN_170x113,3.book Page 11 Friday, March 13, 2015 8:52 AM
Unpacking
•
•
Unpack the fixture and inspect it to ensure that it has not been damaged in transport.
The G-Profile is supplied with:
•
User manual.
One Neutrik TRUE1 power input connector, 2 m (78 in.)
Two Omega brackets with 1/4-turn fasteners.
The fixture is designed for use in wet locations and is IP65-rated. When selecting a location for the fixture, ensure that:
•
• it is situated away from public throughfares and protected from contact with people.
it has adequate ventilation.
Transportation
Always use the supplied packaging for transportation and storage.
Release the pan/tilt locks when transporting the fixture. Leaving the pan/tilt locks applied may cause damage to the fixture.
11
Manual_G_Profile_EN_170x113,3.book Page 12 Friday, March 13, 2015 8:52 AM
Installation / Rigging
WARNING! Always secure elevated fixtures with a safety cable.
The G-Profile may be installed in any orientation.
Always use two Omega brackets to rig the fixture. Lock each bracket with both 1/4-turn fasteners. The fasteners are locked only when turned fully clockwise.
•
•
•
•
Always fasten safety cables between the load-bearing support structure and the attachment points on the fixture. The safety cables must be able to bear at least 10 times the weight of the fixture.
CAUTION:
• Always use 2 safety wires.
Min. safety wire gauge = 5 mm.
Max. safety wire length (free fall) = 30 cm (11 in.)
Make sure the slack of the safety wire is at a minimum.
Never use the carrying handles for secondary attachment.
12
Manual_G_Profile_EN_170x113,3.book Page 13 Friday, March 13, 2015 8:52 AM
Start the rigging process by blocking the work area below, and make sure the work is performed from a stable platform.
1
2
3
4
5
6
7
Check that the clamps are undamaged and can bear at least 10 times the weight of the fixture. Check that the structure can bear at least 10 times the weight for all installed fixtures, clamps, cables etc.
Bolt each clamp securely to an Omega bracket with an M12 / ½” bolt (min. grade 8.8) and lock nut.
Align an Omega bracket with two 1/4-turns in the base. Insert the fasteners into the base and turn both levers a full 1/4-turn clockwise to lock. Install the second Omega bracket.
Working from a stable platform, hang the fixture on a truss, or other structure. Note the position of the base. The front of the base is to the right, when looking at the display panel, and when the fixture is sitting on the base. Tighten the clamps.
Install two safety wires that each can bear at least 10 times the weight of the unit.
The attachment points are designed to fit a carabiner.
Check that the pan/tilt locks are released (A and B). Verify that there are no combustible materials or surfaces to be illuminated within 0.3 m (12 in.) of the fixture.
Check that there is no possibility of head or yoke colliding with other fixtures.
FRONT
13
Manual_G_Profile_EN_170x113,3.book Page 14 Friday, March 13, 2015 8:52 AM
Connecting AC power
The G-Profile can operate on any 200-240V, 50/60 Hz mains power supply.
Connect the fixture to power using a cable with a Neutrik powerCON TRUE1 connector (supplied with the fixture). Connect both DMX in and DMX out cables in order to maintain the fixture IP65.
The fixture must be grounded/earthed and be able to be isolated from AC power.
The AC power supply must incorporate a fuse or circuit breaker for fault protection.
•
•
Connect the black wire to live
Connect the white wire to neutral
• Connect the green wire to ground (earth)
After connecting the G-Profile to power, run the on-board test, using the
“Test→LED Test” menu, to ensure that the fixture is functioning correctly.
See “Control panel menus” on page 19.
Fuse Power
In
DMX
Out
DMX
In
14
Manual_G_Profile_EN_170x113,3.book Page 15 Friday, March 13, 2015 8:52 AM
Control panel operations
•
•
You can configure individual fixture settings, read out data and view error messages in the graphic display. When the fixture is powered on, it boots and resets, then displays the DMX start address and any status messages.
Using the control panel
• Click the arrow buttons to scroll up and down menus.
Click the OK button to enter a menu or make a selection.
Press the ESC button to step backwards through the menus.
ESC.
OK
DMX start address
The DMX start address is the first channel used to receive instructions from the controller. For independent control, each fixture must be assigned its own control channels. If you give two fixtures the same address, they will behave identically.
Address sharing can be useful for diagnostic purposes and symmetrical control.
Select DMX address using the arrow buttons.
Selecting module (G-Profile or G-Spot)
If you replace the fixture’s module in order to switch from a G-Profile to a G-Spot or vice-versa, you need to change the fixture’s software settings.
In the Control Menu, go to ‘Settings→Service Menu→Fixture Type” and select the fixture you are currently using.
NOTE: To access “Service Menu→Fixture Type”, you need to type in the value ‘0110’ under ‘Settings→Service Pin”.
See “Control panel menus” on page 19 for more details.
15
Manual_G_Profile_EN_170x113,3.book Page 16 Friday, March 13, 2015 8:52 AM
Configuring the device using an Android telephone via RFID
The G-Profile can also be configured wirelessly, via RFID, using the SGM Tool app installed on an Android smart phone that has NFC support (ISO 15693 and ISO 18000-3 mode 1 compatible, operating on 13.56 MHz ±7k Hz carrier frequency).
16
Manual_G_Profile_EN_170x113,3.book Page 17 Friday, March 13, 2015 8:52 AM
Connecting to a DMX control device
The G-Profile is controllable using a DMX control device and it can be connected using either a DMX cable or via the fixture’s built-in LumenRadio CRMX wireless receiver system.
If using a cabled DMX system, connect the DMX in cable (with male 5-pin XLR plug) and out cable (with female 5-pin XLR plug) to the DMX data link. Terminate the DMX out cable of the last fixture in the data link. For outdoor installations, use only
IP-rated XLR connectors suitable for outdoor use.
17
Manual_G_Profile_EN_170x113,3.book Page 18 Friday, March 13, 2015 8:52 AM
Configuring the device for DMX control
About DMX
The G-Profile can be controlled using signals sent by a DMX controller on a number of channels (which varies depending on the DMX mode that has been set).
The first channel used to receive data from a DMX control device is known as the DMX start address. Each G-Profile must have a DMX start address set. For example, if a fixture has a DMX address of 10 and it is in 3-channel DMX mode, then it uses channels 10, 11, and 12. The following device in the DMX chain could then be set to a DMX address of 13. If two or more
DMX devices of the same type have the same DMX address, then they will mimic each other’s behavior. Incorrect settings will result in unpredictable responses to the lighting controller.
Setting the DMX address
The DMX address can be seen on the OLED display. To change the address setting, press the up and down arrows. When the desired address is displayed, press ‘OK’ to save the setting. For your convenience, the suggested DMX address of the next device is displayed to the right. Note that channel spacing is determined by the DMX mode.
See the “DMX protocols” on page 32 for specific DMX control values.
18
Manual_G_Profile_EN_170x113,3.book Page 19 Friday, March 13, 2015 8:52 AM
Control panel menus
Level 1
DMX MODE
INFO
Level 2
STANDARD
EXTENDED
GENRAL INFO
SOFTWARE
VERSION
Level 3
PRODUCT:
SN:
RDM LABEL
RDM ID
MAIN:
SMPS:
PAN:
TILT:
GOBO:
ZOOM:
Level 4 Info
19
Manual_G_Profile_EN_170x113,3.book Page 20 Friday, March 13, 2015 8:52 AM
20
Level 1
INFO
(continued)
Level 2
TIMERS
DMX VIEW
Level 3
RED
GREEN
BLUE
RUNNING HOURS
001 -
↓
507 -
TEMPERATURES LED
SMPS
PAN:
GOBO:
BASE:
HUMIDITY
SENSORS
D: H:
D: H:
D: H:
D: H:
R: G: B:
TILT:
FOCUS:
HEAD:
B: H:
Level 4 Info
Manual_G_Profile_EN_170x113,3.book Page 21 Friday, March 13, 2015 8:52 AM
Level 1
INFO
(continued)
Level 2
FANS
LOG
ERRORS
Level 3
LED FAN 1:
LED FAN 2:
HEAD:
BASE:
FIRMWARE:
BUILD:
BUILD:
UPTIME:
SMPS
PAN
TILT
GOBO
ZOOM rpm rpm rpm rpm
D: H: M: S:
Level 4 Info
21
Manual_G_Profile_EN_170x113,3.book Page 22 Friday, March 13, 2015 8:52 AM
Level 1
SETTINGS
Level 2
WIRELESS DMX
Level 3
LOG OFF
STATUS
Level 4
SIGNAL
STRENGHT %
CRMX PAIRD:
RDM ACTIVE:
DMX ACTIVE:
CRMX RATE Hz
Info
ENABLE/DISABLE
CRMX
→
DMX
22
Manual_G_Profile_EN_170x113,3.book Page 23 Friday, March 13, 2015 8:52 AM
Level 1
SETTINGS
(continued)
Level 2 Level 3
DIMMING CURVE LINEAR ()
GAMMA CORRECTED (X)
INVERT PAN ()
INVERT TILT ()
SWAP PAN TILT ()
FLIP DISPLAY ()
DISPLAY OFF ()
FAN MODE STANDARD
SILENT
MAX POWER
ALWAYS 100%
Level 4 Info
23
Manual_G_Profile_EN_170x113,3.book Page 24 Friday, March 13, 2015 8:52 AM
Level 1
SETTINGS
(continued)
Level 2
CALIBRATION
Level 3
PAN HOME
TILT HOME
GOBO SELECT
EFFECT WHEEL
Level 4
CALIBRATION
→
XXXXX
PAN POS XXXX -
REV. X.XX
CALIBRATION
→
XXXXX
PAN POS XXXX -
REV. X.XX
CALIBRATION
→
XXXXX
CALIBRATION
→
XXXXX
Info
24
Manual_G_Profile_EN_170x113,3.book Page 25 Friday, March 13, 2015 8:52 AM
Level 1
SETTINGS
(continued)
Level 2
CALIBRATION
(continued)
Level 3
FROST
PRISM
IRS
ZOOM
FOCUS
SERVICE PIN
SERVICE MENU FIXTURE TYPE
DEBUG
Level 4
CALIBRATION
→
XXXXX
CALIBRATION
→
XXXXX
CALIBRATION
→
XXXXX
CALIBRATION
→
XXXXX
CALIBRATION
→
XXXXX
Info
25
Manual_G_Profile_EN_170x113,3.book Page 26 Friday, March 13, 2015 8:52 AM
Level 1
SETTINGS
(continued)
TEST
Level 2
FACTORY
DEFAULT
OFF
AUTOMATED
TEST
LED TEST
Level 3
FACTORY DEFAULT SET
TESTING RED 2
TESTING RED 1
TESTING BLUE 2
TESTING BLUE 1
TESTING YELLOW
TESTING GREEN
DISPLAY TEST
Level 4
26
Info
Manual_G_Profile_EN_170x113,3.book Page 27 Friday, March 13, 2015 8:52 AM
Level 1
RESET
1
Level 2
PAN TILT
EFFECT MODULE
ZOOM FOCUS
MODULE
ALL
Level 3 Level 4 Info
1. If the G-Profile is subjected to extreme exposure, the fixture might not reset correctly. If this happens, the fixture will automatically heat up the gobo bearings at maximum light output for approx. five minutes and attempt to reset the fixture again. Should this not resolve the issue, disconnect the fixture from power, and power it back on again to repeat the heat-up procedure. Should this not solve the issue, contact your local SGM distributor or SGM Technical Support.
See http://sgmlight.com/service-aftersales/ for more details.
27
Manual_G_Profile_EN_170x113,3.book Page 28 Friday, March 13, 2015 8:52 AM
Gobo replacement
Identification of gobo wheel
Gobo Wheel
5
O p e n
1
3
4
5
No.
Open
1
2
Description
Open gobo
Breakup bricks
Dots
Part No.
37000001
37005006
37005003
Fire up close
Spiral leaf
37005001
37005010
Kaleidoscope gems 37002001
2
4
28
Magnet
3
Manual_G_Profile_EN_170x113,3.book Page 29 Friday, March 13, 2015 8:52 AM
•
•
•
•
Replacing rotating gobo
To replace a gobo:
•
Disconnect the fixture from power and allow to cool.
Position the head and apply the tilt lock.
•
Remove the rear head cover located on the same side as the pan lock
(A). See figure below.
Remove the gobo wheel cover for access to the gobo wheel.
Turn the gobo wheel until the gobo you want to replace is accessible.
Unhook the end of the spring and turn it upwards. Pull the gobo holder out of the gobo wheel.
TORX
20
29
Manual_G_Profile_EN_170x113,3.book Page 30 Friday, March 13, 2015 8:52 AM
How to replace a gobo in a gobo holder
• Place gobo with silver side towards the light source.
•
•
Align index markers on the gobo and the gobo holder as shown below.
Insert the gobo holder and align it with the index marker on the gobo wheel as shown below. If necessary, continue replacing gobos one by one as described above. If no further service is necessary, reinstall the gobo wheel cover. To maintain the fixture’s IP65 rating, it is important to fasten the gobo covers to 1 Nm.
1
30
Manual_G_Profile_EN_170x113,3.book Page 31 Friday, March 13, 2015 8:52 AM
Maintenance
When cleaning the fixture, do not use any product that contains abrasives or solvents that can damage plastic or painted surfaces. Use a clean cloth with water and a standard household cleaner.
To maintain adequate cooling, fans must be cleaned periodically.
Upgrading the firmware
The firmware installed on the fixture can be identified using the “Info→Software version” menu. We recommend that you keep your fixture’s firmware up-to-date. Visit http://www.sgmlight.com to download the latest firmware.
To perform firmware updates, you need a Windows-based personal computer and a SGM USB 5-Pin-XLR upload cable (available from your SGM distributor).
Cleaning
To maintain optimal performance, regular cleaning is essential. Cleaning schedules will vary greatly depending on the operating environment, and the installation should therefore be checked at frequent intervals within the first few weeks of operation to see whether cleaning is necessary. This procedure will allow you to assess cleaning requirements in your particular situation. If in doubt, consult your SGM dealer for a suitable maintenance schedule.
Setting the OLED display saver
By default the OLED display dims down after a short period when the control panel is not in use, but it can also be set to turn off completely. Pressing any key will always turns on the display or restore it to normal brightness. To change the display saver, use the “Settings→Display Off” menu.
NOTE: To avoid the risk of display deterioration caused by long term use in permanent installations, it is recommended to use the “Settings→Display Off” setting.
31
Manual_G_Profile_EN_170x113,3.book Page 32 Friday, March 13, 2015 8:52 AM
DMX protocols
Standard Mode
31 Channel Mode (Standard)
Channel
1
2
3
Name
Shutter
Intensity
Red
176
200
245
0
0
8
16
152
DMX Value
0
199
244
255
255
7
15
151
175
255
0,0%
3,1%
6,3%
59,6%
69,0%
78,4%
96,1%
0,0%
DMX Percentage
0,0%
Description Info
Default
DMX
Value
2,7%
5,9%
Closed
Open
59,2% Strobe
68,6% Pulse - Open
78,0% Pulse - Close
95,7% Strobe - Random
100,0% Open
100,0% No light > Maximum light
100,0%
No RED >
Maximum RED
Slow > Fast
Slow > Fast
Slow > Fast
Slow > Fast
10 (3,9%)
0 (0%)
0 (0%)
Fader
Type
Snap
Fade
Fade
32
Manual_G_Profile_EN_170x113,3.book Page 33 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel Name DMX Value DMX Percentage
4
5
6
Description
Green 0
Blue 0
0
5
15
CTC
40
54
255
4
5
255
15
40
54
0,0%
0,0%
0,0%
2,0%
5,9%
15,7%
21,2%
100,0%
100,0%
1,6%
2,0%
No GREEN >
Maximum GREEN
No BLUE >
Maximum BLUE
No CTC
5,9%
15,7%
21,2%
≈ 2000° K
≈ 2200° K
(High Pressure Sodium
Lamp)
≈ 2700° K
(Incandescent Lamp)
≈ 3000° K
(Halogen / Tungsten Lamp)
Info
Default
DMX
Value
Fader
Type
0 (0%) Fade
0 (0%) Fade
33
Manual_G_Profile_EN_170x113,3.book Page 34 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel Name DMX Value DMX Percentage
6 CTC
Description
65
105
115
177
216
238
255
177
216
238
255
65
105
115
25,5%
41,2%
45,1%
69,4%
84,7%
93,3%
100,0%
25,5%
41,2%
45,1%
69,4%
≈ 3200° K
(Warm Metal Halide Lamp)
≈ 4000° K
(Clear Metal Halide Lamp)
≈ 4200° K
(Cool White Fluorescent
Lamp)
≈ 5500° K
(Daylight Metal Halide Lamp)
84,7% ≈ 6300° K
93,3% ≈ 8000° K
100,0% ≈ 10,000° K
Info
Default
DMX
Value
Fader
Type
0(0%) Fade
34
Manual_G_Profile_EN_170x113,3.book Page 35 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel Name DMX Value DMX Percentage Description
7
8
Pan 0 65535 0,0% 100,0% -270° to 270°
Info
Default
DMX
Value
Fader
Type
-270° = Front
Lens @ Mains
Power Input
(Tilt=0)
-120° = Front
Lens @ Base
Front
(Pan=32767)
32767
(50%)
32767
(50%)
Fade
Fade
9
10
Tilt 0 65535 0,0% 100,0% -120° to 120°
11 Gobo Wheel 1
0
21
42
63
84
105
20
41
62
83
104
127
0,0%
8,2%
16,5%
24,7%
32,9%
41,2%
7,8% Open
16,1% Gobo 1 - Position 1
24,3% Gobo 1 - Position 2
32,5% Gobo 1 - Position 3
40,8% Gobo 1 - Position 4
49,8% Gobo 1 - Position 5
0 (%) Snap
35
Manual_G_Profile_EN_170x113,3.book Page 36 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel
11
12
13
Name DMX Value DMX Percentage Description Info
Default
DMX
Value
Fader
Type
Gobo Wheel 1
128
192
193
191
192
255
0 32767
32768 32799
Gobo Wheel 1
Indexing
Rotation Shake
32800 46418
46419 46919
0,0%
50,0%
50,0%
70,8%
50,2%
75,3%
75,7%
74,9%
Gobo Wheel
Continuous Rotation CW
75,3% No Rotation
100,0%
Gobo Wheel
Continuous Rotation
CCW
50,0% Gobo Index
50,0% No Effect
70,8%
Gobo Continuous
Rotation CW
71,6% No Rotation
Fast > Slow
Slow > Fast
Fast > Slow
0 (0%)
0 (0%)
Snap
Fade
36
Manual_G_Profile_EN_170x113,3.book Page 37 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel Name DMX Value DMX Percentage Description
12
13
17
18
19
14
15
16
Gobo Wheel 1
Indexing
Rotation Shake
Blade 1 In
46920 60538
60539 65535
0 255
71,6%
92,4%
0,0%
0,0%
Blade 1 Angle 0 255
92,4%
100,0% Gobo Shake
100,0% Blade 1 In
100,0%
Gobo Continuous
Rotation CW
Blade 1 Angle
Blade 2 In 0 255 0,0%
0,0%
Blade 2 Angle
Blade 3 In
0
0
255
255 0,0%
100,0% Blade 2 In
100,0%
Blade 2 Angle
100,0% Blade 3 In
Blade 3 Angle 0 255 0,0% 100,0% Blade 3 Angle
Info
Default
DMX
Value
Fader
Type
Slow > Fast
0 (0%)
Slow >Fast
Out >In
-30° > +30°
Out >In
-30° > +30°
Out >In
-30° > +30°
0 (0%)
128
(50%)
0 (0%)
128
(50%)
0 (0%)
128
(50%)
Fade
Fade
Fade
Fade
Fade
Fade
Fade
37
Manual_G_Profile_EN_170x113,3.book Page 38 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel
20
21
22
23
24
Name DMX Value DMX Percentage Description
Blade 4 In
Blade 4 Angle
Blade
Assembly
Rotate
Effect Wheel
0
0
0
255
255
255
0,0%
0,0%
0,0%
0
512
2560
511
2559
32767
0,0%
0,8%
3,9%
100,0% Blade 4 In
100,0% Blade 4 Angle
100,0%
0,8%
3,9%
Blade
Assembly
Rotate
Open
Inserted Not Indexed
50,0% Indexed
Info
Out >In
-30° > +30°
Default
DMX
Value
0 (0%)
128
(50%)
Fader
Type
Fade
Fade
-45° > +45°
128
(50%)
Fade
0 (0%) Fade
38
Manual_G_Profile_EN_170x113,3.book Page 39 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel
23
24
25
Name DMX Value DMX Percentage Description Info
Default
DMX
Value
Fader
Type
Effect Wheel
Iris
32768
46403
60539
0
201
206
46402
46903
46904 60538
65535
200
205
210
50,0%
70,8%
71,6%
92,4%
0,0%
78,8%
80,8%
70,8% Continuous Rotation CW Fast > Slow
71,6% Stop
92,4%
100,0%
Continuous Rotation
CCW
Reserved
(Calibration Position)
78,4% Open > Close
80,4%
82,4%
Effect - “Open fast /
Close slow”
Effect - “Open slow /
Close fast”
Slow >Fast
0 (0%) Fade
0 (0%) Fade
39
Manual_G_Profile_EN_170x113,3.book Page 40 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel
25
26
27
28
Name
Iris
Prism
Frost
Zoom
DMX Value
6
0
211
216
0
5
130
131
0
215
255
4
129
130
255
5
255
255
DMX Percentage Description Info
Default
DMX
Value
Fader
Type
82,7%
84,7%
0,0%
2,0%
51,0%
51,4%
0,0%
2,4%
0,0%
84,3% Effect - “Open / Close”
100,0%
1,6%
Effect - “Random Close /
Open”
Slow > Fast
Open
50,6% Continuous Rotation CW Fast > Slow
51,0% No Rotation
Slow > Fast
100,0%
2,0%
100,0%
Continuous Rotation
CCW
Open
No Frost >
Maximum Frost
100,0% Wide > Narrow
0 (0%)
0 (0%)
0 (0%)
0 (0%)
Fade
Fade
Fade
40
Manual_G_Profile_EN_170x113,3.book Page 41 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel
29
30
Name
Focus
Effect
Channel
DMX Value DMX Percentage Description
27
33
39
45
5
16
0
0
51
57
63
32
38
44
50
255
4
15
26
56
62
68
10,6%
12,9%
15,3%
17,6%
0,0%
0,0%
2,0%
6,3%
20,0%
22,4%
24,7%
100,0% Far > Near
1,6% No Effect
5,9% Reserved (No Effect)
10,2% Reserved (No Effect)
12,5% Shutter Black = RED
14,9% Shutter Black = GREEN
17,3% Shutter Black = BLUE
19,6% Shutter Black = WHITE
22,0% Shutter Black = Magenta
24,3% Shutter Black = Yellow
26,7% Shutter Black = Cyan
Info
Default
DMX
Value
0 (0%)
Fader
Type
Fade
0 (0%) Snap
41
Manual_G_Profile_EN_170x113,3.book Page 42 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel Name
30
31
Effect
Channel
Control
Channel
DMX Value DMX Percentage Description Info
Default
DMX
Value
Fader
Type
0 (0%) Snap
20
25
10
15
69
0
5
255
4
9
27,1% 100,0% Reserved (No Effect)
0,0%
2,0%
1,6%
3,5%
No Function
Full Reset
14
19
24
29
3,9%
5,9%
7,8%
9,8%
5,5% Pan Reset
7,5% Tilt Reset
9,4% Gobo Reset
11,4% Zoom Reset
Hold
3 seconds
Hold
3 seconds
Hold
3 seconds
Hold
3 seconds
Hold
3 seconds
0 (0%) Snap
42
Manual_G_Profile_EN_170x113,3.book Page 43 Friday, March 13, 2015 8:52 AM
31 Channel Mode (Standard)
Channel Name DMX Value DMX Percentage Description Info
Default
DMX
Value
Fader
Type
30 34 11,8% 13,3% Sleep Mode
35 39 13,7% 15,3% Display Off
31
Control
Channel
40 44 15,7% 17,3% Display On
45 255 17,6% 100,0% Reserved (No Function)
1. All other channels must be zero and this has to be held for 30 sec. (fixture will wake up on a full reset).
See note 1
Hold
3 seconds
Hold
3 seconds
0 (0%) Snap
43
Manual_G_Profile_EN_170x113,3.book Page 44 Friday, March 13, 2015 8:52 AM
Extended Mode
46 Channel Mode (Extended)
Channel
1
Name
Shutter
Intensity
DMX Value DMX Percentage Description Info
Default
DMX
Value
Fader
Type
152
176
200
245
0
8
16
0
7
15
151
175
199
244
255
0,0%
3,1%
6,3%
59,6%
69,0%
78,4%
96,1%
2,7%
5,9%
Closed
Open
59,2% Strobe
68,6% Pulse - Open
78,0% Pulse - Close
95,7% Strobe - Random
100,0% Open
65535 0,0% 100,0% No light > Maximum light
Slow > Fast
Slow > Fast
Slow > Fast
Slow > Fast
10 (3,9%) Snap
0 (0%)
2
3
4
5
Red 0 65535 0,0% 100,0%
No RED > Maximum
RED
0 (0%)
44
Manual_G_Profile_EN_170x113,3.book Page 45 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel
6
7
8
9
10
Name DMX Value DMX Percentage Description
Green 0
Blue
CTC
0
0
5
15
40
54
65535
65535
4
5
15
40
54
0,0%
0,0%
0,0%
2,0%
5,9%
15,7%
21,2%
100,0%
No GREEN > Maximum
GREEN
100,0%
No BLUE > Maximum
BLUE
1,6%
2,0%
5,9%
15,7%
21,2%
No CTC
≈ 2000K
≈ 2200K
(High Pressure Sodium
Lamp)
≈ 2700K
(Incandescent Lamp)
≈ 3000K
(Halogen / Tungsten lamp)
Info
Default
DMX
Value
Fader
Type
0 (0%)
0 (0%)
0(0%) Fade
45
Manual_G_Profile_EN_170x113,3.book Page 46 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel Name DMX Value DMX Percentage
10 CTC
Description
177
216
238
255
65
105
115
177
216
238
255
65
105
115
25,5%
41,2%
45,1%
69,4%
84,7%
93,3%
100,0%
25,5%
41,2%
45,1%
69,4%
≈ 3200K
(Warm Metal Halide Lamp)
≈ 4000K
(Clear Metal Halide Lamp)
≈ 4200K
(Cool White Fluorescent
Lamp)
≈ 5500K
(Daylight Metal Halide Lamp )
84,7% ≈ 6300K
93,3% ≈ 8000K
100,0% ≈ 10,000K
Info
Default
DMX
Value
Fader
Type
0(0%) Fade
46
Manual_G_Profile_EN_170x113,3.book Page 47 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel
11
12
Name
Pan
DMX Value DMX Percentage Description
0 65535 0,0% 100,0% -270° to 270°
13
14
Tilt 0 65535 0,0% 100,0% -120° to 120°
15 Gobo Wheel 1
0
21
42
63
84
105
20
41
62
83
104
127
0,0%
8,2%
16,5%
24,7%
32,9%
41,2%
7,8% Open
16,1% Gobo 1 - Position 1
24,3% Gobo 1 - Position 2
32,5% Gobo 1 - Position 3
40,8% Gobo 1 - Position 4
49,8% Gobo 1 - Position 5
Info
Default
DMX
Value
Fader
Type
-270° = Front
Lens @ Mains
Power Input
(Tilt=0)
-120° = Front
Lens @ Base
Front
(Pan=32767)
32767
(50%)
32767
(50%)
Pan
Tilt
0(0%) Snap
47
Manual_G_Profile_EN_170x113,3.book Page 48 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel
15
16
17
Name DMX Value DMX Percentage Description Info
Default
DMX
Value
Fader
Type
Gobo Wheel 1
Gobo Wheel 1
Indexing
Rotation
Shake
128
192
193
0
32768
32800
46419
191
192
255
32767
32799
46418
46919
46920 60538
50,2%
75,3%
75,7%
0,0%
50,0%
50,0%
70,8%
71,6%
74,9%
Gobo Wheel Continuous
Rotation CW
Fast > Slow
75,3% No Rotation
100,0%
Gobo Wheel Continuous
Rotation CCW
Slow > Fast
50,0% Gobo Index
50,0% No Effect
70,8%
Gobo Continuous
Rotation CW
71,6% No Rotation
92,4%
Gobo Continuous
Rotation CCW
Fast > Slow
Slow > Fast
0(0%)
0(0%)
Snap
Fade
48
Manual_G_Profile_EN_170x113,3.book Page 49 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel Name DMX Value DMX Percentage
16
17
22
23
24
25
18
19
20
21
26
27
Gobo Wheel 1
Indexing
Rotation
Shake
60539 65535 92,4% 100,0%
Blade 1 In 0 65535 0,0% 100,0%
Blade 1 Angle 0 65535 0,0% 100,0%
Blade 2 In
Blade 2 Angle
Blade 3 In
0 65535 0,0% 100,0%
0 65535 0,0% 100,0%
0 65535 0,0% 100,0%
Description
Blade 1 In
Blade 1 Angle
Blade 2 In
Blade 2 Angle
Blade 3 In
Info
Default
DMX
Value
Fader
Type
Fade
Out >In
-30° > +30°
Out >In
-30° > +30°
Out >In
0(0%)
32767
(50%)
0(0%)
32767
(50%)
0(0%)
Fade
49
Manual_G_Profile_EN_170x113,3.book Page 50 Friday, March 13, 2015 8:52 AM
28
29
30
31
32
33
34
35
46 Channel Mode (Extended)
Channel
36
37
Name
Blade 3 Angle
DMX Value
0 65535
DMX Percentage
0,0% 100,0%
Description
Blade 3 Angle
Info
-30° > +30°
Default
DMX
Value
32767
(50%)
Fader
Type
Blade 4 In 0 65535 0,0% 100,0% Blade 4 In Out >In
Blade 4 Angle
Blade
Assembly
Rotate
Effect Wheel
0 65535 0,0% 100,0% Blade 4 Angle -30° > +30°
0 65535 0,0%
0
512
2560
511
2559
32767
32768 46402
0,0%
0,8%
3,9%
50,0%
100,0%
Blade
Assembly
Rotate
-45° > +45°
0,8% Open
3,9% Inserted Not Indexed
50,0% Indexed
70,8% Continuous Rotation CW Fast > Slow
0(0%)
32767
(50%)
32767
(50%)
0(0%)
Fade
Fade
50
Manual_G_Profile_EN_170x113,3.book Page 51 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel
36
37
38
Name
Effect Wheel
Iris
DMX Value DMX Percentage Description Info
Default
DMX
Value
Fader
Type
46403 46903
46904
60539
0
201
206
211
216
60538
65535
200
205
210
215
255
70,8%
71,6%
92,4%
0,0%
78,8%
80,8
82,7%
84,7%
71,6% Stop
92,4%
Continuous Rotation
CCW
100,0%
Reserved
(Calibration Position)
78,4% Open > Close
80,4%
82,4%
Effect - “Open fast /
Close slow”
Effect - “Open slow /
Close fast”
Slow > Fast
84,3% Effect - “Open / Close”
100,0%
Effect - “Random Close /
Open”
Slow > Fast
0(0%)
0 (0%)
Fade
Fade
51
Manual_G_Profile_EN_170x113,3.book Page 52 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel
39
40
Name
Prism
Frost
Zoom
DMX Value DMX Percentage Description Info
Default
DMX
Value
Fader
Type
0
6
0
5
130
131
0
4
129
130
255
5
255
65535
0,0%
2,0%
51,0%
51,4%
0,0%
2,4%
1,6%
50,6%
Open
Continuous
Rotation CW
51,0% No Rotation
100,0%
2,0%
Continuous
Rotation CCW
Open
100,0%
No Frost > Maximum
Frost
0,0% 100,0% Wide > Narrow
Fast > Slow
Slow > Fast
0(0%) Fade
0 (0%) Fade
0 (0%) Fade
41
42
43
44
Focus 0 65535 0,0% 100,0% Far > Near 0 (0%) Fade
52
Manual_G_Profile_EN_170x113,3.book Page 53 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel Name DMX Value DMX Percentage
45
Effect
Channel
Description
27
33
39
45
0
5
16
51
57
63
69
32
38
44
50
4
15
26
56
62
68
255
0,0%
2,0%
6,3%
10,6%
12,9%
15,3%
17,6%
20,0%
22,4%
24,7%
27,1%
1,6% No Effect
5,9% Reserved (No Effect)
10,2% Reserved (No Effect)
12,5% Shutter Black = RED
14,9% Shutter Black = GREEN
17,3% Shutter Black = BLUE
19,6% Shutter Black = WHITE
22,0% Shutter Black = Magenta
24,3% Shutter Black = Yellow
26,7% Shutter Black = Cyan
100,0% Reserved (No Effect)
Info
Default
DMX
Value
Fader
Type
0 (0%) Snap
53
Manual_G_Profile_EN_170x113,3.book Page 54 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel Name DMX Value DMX Percentage Description
46 Control Channel 15
20
25
30
0
5
10
4
9
14
0,0%
2,0%
1,6% No Function
3,5% Full Reset
3,9% 5,5% Pan Reset
19
24
5,9%
7,8%
7,5%
9,4%
Tilt Reset
Gobo Reset
29
34
9,8%
11,8%
11,4% Zoom Reset
13,3% Sleep Mode
Info
Default
DMX
Value
Fader
Type
Hold
3 seconds
Hold
3 seconds
Hold
3 seconds
Hold
3 seconds
Hold
3 seconds
See note 1
0(0%) Snap
54
Manual_G_Profile_EN_170x113,3.book Page 55 Friday, March 13, 2015 8:52 AM
46 Channel Mode (Extended)
Channel Name DMX Value DMX Percentage Description
46 Control Channel 35 39 13,7% 15,3% Display Off
1. All other channels must be zero and this has to be held for 30 sec. (fixture will wake up on a full reset).
Info
Hold
3 seconds
Default
DMX
Value
Fader
Type
0(0%) Snap
55
Manual_G_Profile_EN_170x113,3.book Page 56 Friday, March 13, 2015 8:52 AM
Effects
Four individually controllable framing blades
The four individually controllable framing blades are each adjustable ±30 degrees while the module is rotatable through ±45 degrees. The framing blades allows the G-Profile to perform beam-shaping images and projections (see examples below) and
“DMX protocols” on page 32 for more details.
Independent rotating gobo wheel
The independent rotating gobo wheel has five slots plus one open position to control the shape of emitted light. The gobo is indexable with bi-directional rotation. The standard gobo includes both breakup patterns, geometric gobos and full colored gobos.
Combination of framing techniques and rotating gobos
The G-Profile provides the option of combining framing techniques with 5 rotating gobos and opens for gobo animation and interaction when framing is used.
56
Manual_G_Profile_EN_170x113,3.book Page 57 Friday, March 13, 2015 8:52 AM
Effect wheel
The G-Profile has an effect wheel for generating optical effect. The effect wheel features continuous rotation with variable speed and direction.
High-precision pan and tilt
The G-Profile has a 16-bit pan and tilt control, with a 540° pan and 270° tilt movement with feedback.
Ultra high-speed strobe effect
The ultra high-speed strobe effect (1-50 Hz) introduces instant color control and the possibility to strobe between two or more colors at any speed by. Random strobe and pulse effects can be generated with variable speed.
Prism
4-facet rotating prism.
Frost
The soft high-quality frost filter is variable from 0% to 100%.
57
Manual_G_Profile_EN_170x113,3.book Page 58 Friday, March 13, 2015 8:52 AM
Fixtures and accessories
Included items
Two Omega brackets with 1/4-turn fasteners
2 m power cable with Neutrik TRUE1 power connector
User manual
Ordering information
G-Profile Moving Head in cardboard box ...................................................................................................Order no: 80021010
G-Profile Moving Head in flight case (1 fixture).......................................................................................... Order no: 80021011
SGM USB uploader cable .......................................................................................................................... Order no: 83062011
2 m power cable with Neutrik TRUE1 power connector.............................................................................Order no: 07860040
Flight case (1 fixture)..................................................................................................................................Order no: 82051003
58
Manual_G_Profile_EN_170x113,3.book Page 59 Friday, March 13, 2015 8:52 AM
APPROVALS AND CERTIFICATIONS
Conforms to.................................................................................................................................. 2004/108/EC: EMC Directive
Conforms to........................................................................................................................ 2006/95/EC: Low Voltage Directive
Conforms to.................................................................................................................................2011/65/EU: RoHS2 Directive
Conforms to............................................................................................................................................................ UL Std.1573
Certified to ...........................................................................................................................................CSA E60598-1:02, Ed: 2
Certified to ......................................................................................................................................... CSA-E598-2-17-98, Ed: 1
RoHS
4008543
The information in this document is subject to change without notice
59
Manual_G_Profile_EN_170x113,3.book Page 60 Friday, March 13, 2015 8:52 AM
User’s notes
60
Manual_G_Profile_EN_170x113,3.book Page 61 Friday, March 13, 2015 8:52 AM
61
Manual_G_Profile_EN_170x113,3.book Page 62 Friday, March 13, 2015 8:52 AM
SGM A /S · Sommer vej 23 · 8210 A arhus V · Denmark
Tel +45 70 20 74 00 · [email protected] · www.sgmlight.com
Distributor: www.techni-lux.com
Phone: 407-857-8770
Fax: 407-857-8771
Email: [email protected]
advertisement
Key Features
- IP65-rated
- powerful LED light source
- virtually unlimited color palette
- four individually controllable framing blades
- wired and wireless DMX control
- RFID and NFC
- low power consumption
- 50,000 hours LED lifetime