zumtobel_luxmate_brochure

zumtobel_luxmate_brochure
LUXMATE
Lighting
management
In the beginning was
dark space. Then
light, energy and life.
LUXMATE controls
the potential of light,
creating new worlds of
experience. For people, their visions, their
well-being. With maximum energy efficiency.
Intelligently controlled light
STRONG ON DESIGN
ERGONOMICS
Langen Foundation, Hombroich missile base, Neuss/D
Museum by Tadao Ando
E N E R G Y- E F F I C I E N T
FLEXIBLE
Innovative lighting management
Transforming light into a lighting solution
Emergency lighting
Light
Opening up worlds of experience LUXMATE lighting management is
the bridge between the application concept and the luminaires, making the lighting solution complete. Requirements are met, desired effects are created – at minimum use of resources. In this way, intelligent
management strikes a balance between economy and the environment.
Convenience and safety are increased to the same extent. Emergency
lighting is an integral component of any lighting solution; Zumtobel also
provides customised emergency lighting control systems. Numerous automatic functions are included, which make work easier for the building
operator. In practical implementation, customers are assisted by experienced Zumtobel experts. Thanks to their extensive solution competence,
they ensure sophisticated implementation of the customers’ wishes as
well as functional reliability.
5
Service
Lighting management
Natural light
Good for people and good for the energy balance
19 %
19 %
0%
0%
current energy consumption
22,7 Watts
9,5 % of a total of 239 watts installed load
Human beings and daylight Daylight is vital for human beings. It influences our performance and our well-being. Modern architecture often
relies on large areas of glass frontage with transparent façades, but
however pleasing natural light may generally be felt to be, it can also be
disturbing under certain conditions. A LUXMATE lighting management
system guarantees the correct balance.
11:45 am At lunchtime the sun is
at its zenith, which may lead to undesired glare and warming. Correctly
positioned blind slats allow sufficient
light to enter the room, and luminaires
directly at the window front are heavily
dimmed.
7
86 %
86 %
86 %
86 %
current energy consumption
205,5
82,4 Watts
Watts
34,5%%ofofa total
86
a totalofof239
239watts
wattsinstalled
installedload
load
7:17 pm A clear view through the
open blinds brings evening atmosphere into the room. Indirect distribution light creates a pleasant ambient
brightness. The visual task determines
the right quantity of direct light.
Meaningful changes in lighting
Taking nature as a model Nature has shown us how light influences
our mood by colour, intensity and direction. Even subtle changes in white
tones are sufficient to provide stimulation or relaxation. As people are
highly sensitive; visual enhancements and increases in performance can
therefore be easily brought about in museums or offices, for instance.
Even where lighting effects are intended to create a high level of attention,
Zumtobel has all the right components and formulas at hand. Dynamic
changes of high-intensity light colours, for example, make retail areas or
façades come alive.
Changing colour
temperatures in the
white range, for
museums or office
areas.
6.500 K
4.000 K
2.500 K
Dynamic colour
sequences for retail
areas or façades.
9
Chromaticity diagram according to CIE 1931
2500 K
3000 K
4000 K
5000 K
6500 K
15000 K
endless
Black-Body Curve
Attractive interfaces between people and technology
Convenient, intuitive operation
Adjusting lighting scenes at the touch of a button Every activity is
associated with different optimum lighting conditions. LUXMATE users
therefore have at their disposal an instrument for composing lighting
scenes for specific activities and calling them up on demand - at the
touch of a button. All modules use the same symbols, which have been
tried and tested in practice: CIRCLE control point, EMOTION touch panel,
CIRIA, PC user interface, Web access or telephone. All modules are
operated according to the same model. This helps to reinforce familiar
and “acquired” processes until operating the system ultimately becomes
child’s play.
Desk-based work scene
Bright ambient lighting provides for convenient
reading at the desktop. The balanced ratio of
horizontal and vertical illuminance levels ensures perfect contrast rendition.
11
CIRCLE
CIRIA
Screen-based work scene
The luminaires in the room provide uniform
light distribution as well as minimum glare
and reflection; for the user’s convenience, the
walls are brightened up as well.
LUXMATE EMOTION
Conference scene
A bright room with a large direct light component is ideal for meetings where people also
take notes. Moreover, the cool light colour of
the LED luminaires creates a stimulating atmosphere.
Facility Management
Control centre
Via a convenient graphic interface, facility
managers, service technicians or porters
have the whole building firmly under their
control.
13
Thanks to its comprehensive interfaces with all building services,
LUXMATE achieves networked light through a simple control and monitoring centre. Even building-wide or site-wide solutions are possible. The
openness of this system can integrate the lighting and shading systems
into a centralised building-control system. What really excites facility
managers is the speed with which errors can be detected and localised.
Information can be collected and the system can be modified at any
time by remote maintenance. The user interface is well-structured; the
symbols are easily comprehensible.
ONLITE emergency lighting system and escape-sign luminaires
Integrated solutions for increased security
Integrated and safe In addition to its functions related to design, visual
task and emotion, lighting must also fulfil basic safety requirements. A
perfectly balanced interplay between the ONLITE safety concept and
LUXMATE lighting control modules guarantees that lighting, lighting
management and emergency lighting cooperate as a functional whole.
Control with safety All ONLITE components were designed for integration within the LUXMATE system environment. Emergency lighting and
control use the same DALI data line, thereby avoiding the need for additional bus lines. However, general lighting and emergency lighting can
be switched and dimmed independently of one another. During normal
operation, the emergency lighting component is deliberately suppressed
and only shows its true ability in tests or in a real emergency.
15
Supply and monitor with safety Routine monitoring and registration of
emergency lighting and escape-sign luminaires are a legal requirement.
With LUXMATE, these systems can be linked and integrated within a centrally monitored system. This means that savings can be made already at
the installation stage; furthermore, monitoring and the writing of test protocols take place automatically, and this reduces the use of personnel.
General lighting and emergency lighting are perfectly matched. General
luminaires take over the job of emergency luminaires allowing a continuous
luminaire design and an architecturally
calm overall image.
Appropriate solutions for every application
LUXMATE lighting management systems at a glance
LUXMATE BASIC
single-room lightingmanagement
ZBOX
plug & play system for hotel rooms
LUXMATE EMOTION
multi-room lightingmanagement
LUXMATE LITENET / PROFESSIONAL
high-end room management system with lighting
and blinds control
DMX lighting management
Dynamic lighting scenarios for external façades
DMX
LUXMATE LITENET / PROFESSIONAL
LUXMATE EMOTION
ZBOX
HOTEL
LUXMATE BASIC / DIMLITE
LUXMATE BASIC / DIMLITE
single-room lightingmanagement
LUXMATE BASIC / DIMLITE
ZBOX
LUXMATE EMOTION
LUXMATE LITENET / PROFESSIONAL
LUXMATE BASIC is the ideal solution for increasing comfort and convenience with the simplest possible resources, while at the same time
reducing energy consumption. This entry-level system dims the lighting
system either at the touch of a button or automatically depending on the
incoming daylight. This solution not only increases the well-being and
productivity of employees, it also saves energy and reduces power costs.
LUXMATE BASIC is equally suitable for controlling individual luminaires
and luminaire groups. Electrical installation and commissioning procedures do not require specially-trained technicians or special equipment.
An intelligent lighting solution at an affordable price: perfect for offices, schools,
educational institutions and production facilities.
DMX

LUXMATE BASIC/DIMLITE
Entry-level lighting
management
If you prefer a cost-favourable
entry into the world of controllable light:
This affordably-priced lighting
management package offers:
– convenient control of dimmable luminaire groups in individual small or large rooms
– lighting control dependent on
daylight or the presence of
people in the room
– infrared remote control
21
DIMLITE: overview of products and applications
Saving energy
Daylight-based
control
Conventional switches/momentary
action switches
CIRCLE
control point
Infrared remote
control unit
A direct comparison of ballasts
Electronic ballast
dim²save
DALI dimmable
Mode
switch
dim from
10 – 100 %
dim from
1 – 100 %
Input interface
none
switchdim
DIMLITE, DSI
switchdim
DALI addressable
Emergency lighting
DC-compatible
Fixed level: 100 %
DC-compatible
fixed level: 15 %
DC-compatible
adjustable to 70 %
Lamps
T16, T26, compact
fluorescent lamps
T16, compact
fluorescent lamps
T16, T26, compact
fluorescent lamps
Functions
Components that
can be integrated
Remote control
unit
CIRCLE
control unit
Daylight-based
control
Presence detector
Control by
momentary-action
switch
Lighting scene
Number of
DALI luminaires
DIMLITE
basic module
Number of
DSI/dim²save
luminaires
System size
Dimming
DIMLITE four versions
Number
of groups
Presence
detector
Convenience features
DIMLITE single*
1
25
25
•
•
•
•
DIMLITE daylight*
2
50
50
•
•
•
•
•
DIMLITE multifunction 2ch**
2
100
50
•
•
•
•
•
•
•
DIMLITE multifunction 4ch**
4
200
100
•
•
•
•
•
•
•
* to be installed in luminaire or ceiling void
** for installation in switch cabinet (DIN rail mounted device)
LUXMATE BASIC/DIMLITE
Complete package
Complete package for
2 lighting groups and
3 lighting scenes
– Control and programming via
CIRCLE CSx control point
– Several CIRCLE control points
can be connected in parallel
– Control point available in white
or silver
Control devices
– as DALI version
(dim²save not possible)
– Up to 64 luminaires can be
connected via DALI
– Easy to install and commission
– Bus supply included in
package
Control units
Lamp control gear
Lamps
Fluorescent lamps T26/T16
TC-L/TC-DEL/TC-TEL
Mains 230 V/50 Hz
L
N
PE
DALI control line,
e.g. NYM 2 x 1.5 mm 2
up to 100 m long
L
12
11
DALI electronic ballasts
N
DA
10
9
DA
DA
DA
Incandescent lamps/HV
halogen incandescent lamps
or
EMOTION BV2
bus power supply
2 lighting groups
3 scene keys
PCA, PHD, TEL, max. 64 off
DALI phase dimmers
L'
N
DA
DA
N
L
or
DALI-CSx
LV halogen incandescent lamps
DALI transformers
max. 2 m
DA
DA
Scene call-up
Lighting scene 1: „screen-based work“
Lighting scene 2: „good morning“
Lighting scene 3: „conference“
Individual control of luminaire groups
Group 1:
indirect light
Group 2:
direct light
23
Dimming via control by momentary-action switches
– absolutely flicker-free,
synchronous dimming
– easy programming and call-up
of lighting scenes
– presence detector can be
integrated, 3 functional
profiles: ONLY OFF, ON/OFF,
CORRIDOR
Control units
– dimming range max. 1–100 %
(dim²save 10–100 %)
– can be operated by any standard momentary-action light
switch 230 V
– several momentary-action
switches can be connected in
parallel
Control devices
– DALI/DSI/dim²save auto identification (no mixed mode)
– easy installation
– designs available: installed in
luminaire, recessed into ceiling
(using strain relief supplied)
Lamp control gear
Lamps
Fluorescent lamps T26/T16
TC-L/TC-DEL/TC-TEL
Mains 230 V/50 Hz AC
L
N
PE
Conventional
momentary-action
light switch
scene
*
**
L
N
T
T
PIR
Sc
L
N
D1
D2
Fluorescent lamps T26/T16
TC-L/TC-DEL/TC-TEL
DA
DA
dim²save
DIMLITE single
max. 25 control gear
Conventional double
momentary-action
light switch
On/off
Dim
DALI/DSI electronic ballasts
DALI/DSI control line
e.g. NYM 2 x 1.5 mm 2 ,
up to 300 m long
Conventional
presence detector
L
N
DA-B
DA-B
DALI/DSI phase dimmers
L'
N
L
N
* Saving the preset lighting level
NEW:
snap-on strain relief
Incandescent lamps/HV
halogen incandescent lamps
or
D1
D2
** Alternative:
When using a single momentaryaction switch, fit jumper on terminal
“T↑” und “T↓”
or
DALI/DSI transformers
LV halogen incandescent lamps
max. 2 m
D1
D2
LUXMATE BASIC/DIMLITE
Daylight-based dimming
– absolutely flicker-free,
synchronous dimming
– automatic daylight-based
control
– alternatively: integration of one
lighting scene or a presence
detector possible
– presence detector with
3 functional profiles:
ONLY OFF, ON/OFF,
CORRIDOR
Sensors
L
N
PE
Control units
– dimming range max. 1 –100 %
(dim²save 10–100 %)
– can be operated by any standard momentary-action light
switch 230 V
– several momentary-action
switches can be connected in
parallel
– DALI/DSI/dim²save auto identification (no mixed mode)
– easy installation
Control devices
– designs available: installed in
luminaire, recessed into ceiling
(using strain relief supplied) or
already built into luminaire
Lamp control gear
Mains 230 V/50 Hz AC
Lamps
Group I (max. 25 control gear)
L
Interior illuminance
sensor LSD
Illuminance-sensor circuit e.g.
NYM 2 x 1,5 mm 2 , max. 100 m long
Fluorescent lamps
T26/T16/TCL/TC-DEL/TC-TEL
DALI/DSI electronic ballast
N
D1
D2
L
N
T1
Conventional double
momentary-action
light switch
On/off
Dim
Fluorescent lamps
T26/T16/TCL/TC-DEL/TC-TEL
S1
S2
G1 DA
DA
DA
G2 DA
T2
PIR/Sc
L
dim²save
N
DIMLITE daylight
DA-B
DA-B
Group II (max. 25 control gear)
L
Conventional
presence detector
Fluorescent lamps
T26/T16/TCL/TC-DEL/TC-TEL
DALI/DSI electronic ballast
N
NEW:
snap-on strain relief
D1
D2
Alternatively:
conventional
momentary-action
light switch
scene
Fluorescent lamps
T26/T16/TCL/TC-DEL/TC-TEL
DALI/DSI control circuit e.g.
NYM 2 x 1,5 mm 2
max. 300 m long
L
dim²save
N
DA-B
DA-B
Control line:
DALI/DSI/dim²save
Group 2
Group 1
LSD
daylight sensor
Mains
DALI/DSI channel 1
LSD daylight sensor
DALI/DSI channel 2
Mains
Presence
detector
Master luminaire:
DIMLITE daylight
DALI/DSI channel 2
Mains
Momentaryaction switch
Group 1
Group 2
Momentary-action
switch control
Slave luminaire:
DALI or dim²save
25
Multifunctional lighting control
Multifunctional
lighting control unit
L
N
PE
230 V AC
ED-Eye light
sensor
– Compact lighting control unit
for 2/4 luminaire groups
– DALI/dim²save and DSI outputs – automatic identification
– Reducing stand-by loss:
automatic power disconnection of lighting actuators via
integrated relay
– Up to 3 lighting scenes, one
of them with daylight-based
control (depending on additional devices)
ED-Sens
(PD+IR)
Multi-sensor
IRTOUCH
ED-IR
infrared receiver
ED-SDED2
group module
ED-SDED2
lighting scene
module
– Modular range of functions,
to be individually combined:
- daylight-based control
- presence detectors /
movement sensors ONLY
OFF, ON/OFF, CORRIDOR
- infrared remote control unit
- CIRCLE comfort control unit
- lighting scene module
- group module
– AUTO setup: automatic initialisation, no addressing required
CIRCLE Cxx control
point comfort control unit
Load contactor
(optional)
max. 300 m at
1.5 mm²
max. 8 ED units
optional mains isolation
facility
max. 300 m at
1.5 mm²
max. 25 DALI or
50 DSI per channel
Relay
L
N
DA
DA
DALI/DSI HFG (1 DALI load)
T26/T16 TC-L/TC-DEL/
TC-TEL fluorescent lamps
L
N
DA-B
DA-B
dim²save HFG (1 DALI load)
T26/T16 TC-L/TC-DEL/
TC-TEL fluorescent lamps
L
N
DA
DA
DALI/DSI HFG (1 DALI load)
T26/T16 TC-L/TC-DEL/
TC-TEL fluorescent lamps
L
N
DA-B
DA-B
dim²save HFG (1 DALI load)
T26/T16 TC-L/TC-DEL/
TC-TEL fluorescent lamps
Control IN
Channels 3 + 4
only with
DIMLITE multifunction 4ch
L’
N
DA
DA
Presence
detector
APDX-500 (1 DALI load)
e.g.: halogen lamp
TE one4all (1 DALI load)
e.g.: low-voltage
halogen lamp
L
N
DA
DA
Lighting scene /
automatic
daylight-based
control (only
4ch)
All groups
Group 1
Group 2
Group 3
Group 4
Design notes
− DIMLITE multifunction 2ch twochannel unit and DIMLITE multifunction 4ch four-channel unit are identical except for the number of output
channels and corresponding key
inputs.
− AUTO setup function: each time the
power returns to the unit, the system
will be initialised automatically.
− Maximum cable length for all control
lines (Control-IN, DSI and DALI):
max. 300 m each at 1.5 mm².
− The DIMLITE outputs are DSI or
DALI broadcast – no addressing
is required during commissioning.
Groups are assigned by wiring the
lighting actuators accordingly.
− Maximum of 25 DALI/dim²save units
(25 DALI loads) or 50 DSI/dim²save
units per output channel
− Only Zumtobel ED units may be connected to Control-IN. Maximum of
8 ED units at Control IN (exception:
max. 1 light sensor).
− ED-SENS presence detector can be
assigned to individual groups via IR
remote control.
− Installation of light sensor: surfacemounted on the ceiling, directed
towards the window.
− Lighting scenes and daylight settings
are entered using key combinations.
− If a light sensor is installed, Lighting
Scene 1 will always call up the daylight programme; all available groups
will always be subject to daylightbased control.
− Up to 3 lighting scenes, depending
on the control unit used; each control unit will always call up the same
scene 1, 2, 3 or OFF.
− The functions of the “ED-SDED2”
ED unit may be selected using the
integrated rotary switch: either scene
module (1, 2, 3, OFF) or group module (dimming of Group 1, 2, 3, 4).
− CIRCLE control unit calls up three
lighting scenes and OFF; the two
rocker control switches will dim
Lighting Groups 1 and 2; Lighting
Groups 3 and 4 cannot be individually dimmed.
− Conventional 230 V momentaryaction switches can be connected to
the momentary-action switch inputs.
− PIR input to connect a conventional
movement sensor.
− Relay for mains cut-off: 16 A resistive load; in case of higher loads
or capacitive/inductive loads, an
external power contactor is recommended.
LUXMATE BASIC/DIMLITE
|...| Shared properties
DALI package with Circle control
point
■
■
■
3 individually programmable lighting
scenes
Dimming of 2 luminaire groups
Bus power supply for up to 64 DALI
dimmable luminaires
CIRCLE kit including control point in rounded-edge design
■ |...|
■ KIT includes: DALI-CSx Circle control
point and EMOTION-BV2 power supply
■
■
■
Easy installation
1 Circle control point is equivalent to
3 DALI loads
DALI Circle control points can be
added
L/W/H
Order no.
DALI package with control unit
DALI-CSS KIT silver
DALI-CSW KIT white
86/86/13
86/86/13
22 154 492
22 154 493
160/30/21
22 154 419
Converter for DSI operation
DALI-2DSI 2 outputs
25 11
102
51
86
Ø 56
30
86
13
CIRCLE kit including control point in square-edge design
■ |...|
■ KIT includes: DALI-CCx Circle control
point and EMOTION-BV2 power
supply
L/W/H
Order no.
DALI package with control unit
DALI-CCS KIT silver
DALI-CCW KIT white
87/87/13
87/87/13
22 161 689
22 154 625
160/30/21
22 154 419
Converter for DSI operation
DALI-2DSI 2 outputs
INTO-1CCX mounting frame for 25mm plasterboard wall
INTO-CCX TOOL Pull-off tool
22 161 751
22 161 893
25 11
102
51
87
Ø 56
30
87
13
L/W/H
CIRCLE control point, rounded-edge design, for CIRCLE wall-recessed kit
Order no.
rounded-edge
DALI-CSS 1/2/3 silver
DALI-CSW 1/2/3 white
86/86/13
86/86/13
22 154 490
22 154 491
87/87/13
87/87/13
22 154 626
22 154 627
square-edge
25 11
■
■
■
■
Additional control point for a DALI
Circle KIT system
Power supply via DALI control line
(occupies 3 DALI loads)
Installed in single Euro socket, dimensions acc. to DIN 0606 (Ø 60 mm,
depth 42 mm), or UK metal backbox
(not included in supply)
All control points in a Circle KIT installation can be used to run the same
scenes and groups in the installation
13
25 11
86
86
Ø 56
86
86
Ø56
DALI-CCS 1/2/3 silver
DALI-CCW 1/2/3 white
13
27
Order no.
DALI package with control unit
CIRCLE tune Kit CCS silver
CIRCLE tune Kit CCW white
22 185 168
22 185 167
25 11
102
51
Ø 56
30
87
87
13
Order no.
22 185 170
22 185 169
25 11
87
Ø 56
CIRCLE tune control point, square-edge design, for CIRCLE wall-recessed kit
square-edge
■ Provides extra functions for the CIRCIRCLE tune CCS silver
CLE tune KIT
CIRCLE tune CCW white
■ For controlling tunable white luminaires (DALIdt8)
■ Can control 1 luminaire group (up to
64 luminaires)
■ 3 individually programmable lighting
scenes
■ Rocker switches for adjusting intensity and colour temperature
■ No commissioning (address-setting)
necessary (Broadcast mode)
■ 1 Circle control point is equivalent to
3 DALI loads
■ Installed in single Euro socket, dimensions acc. to DIN 0606 (Ø 60 mm,
depth 42 mm), or UK metal backbox
(not included in supply)
87
CIRCLE tune kit including control point in square-edge design
■ For controlling tunable white luminaires (DALIdt8)
■ Can control 1 luminaire group (up to
64 luminaires)
■ 3 individually programmable lighting
scenes
■ Rocker switches for adjusting intensity and colour temperature
■ No commissioning (address-setting)
necessary (Broadcast mode)
■ Up to 11 extra CIRCLE tune control
units can be added to package
■ 1 Circle control point is equivalent to
3 DALI loads
■ Installed in single Euro socket, dimensions acc. to DIN 0606 (Ø 60 mm,
depth 42 mm), or UK metal backbox
(not included in supply)
■ KIT includes: Circle CIRCLE tune control unit and EMOTION-BV2 power
supply
13
DALI/DSI control unit (PIR, momentary-action switch), 1 channel, installed in luminaire/ceiling
Control device
■ For single or double momentaryDIMLITE single
action switch control of a max. of 25
DSI-, DALI or dim²save-compatible
control gear
■ DALI/DSI/dim²save control gear, no
mixed operation
■ ON / OFF / dimming (1–100 %)
■ Either motion detector function (only
off, on/off, corridor) or store/run one
light scene
■ Installation: fitted in luminaire or ceiling void with plug-on strain relief
(included)
L/W/H
DALI/DSI control unit (sensor, PIR), 2 channels, installed in luminaire/ceiling
■ For daylight-based control of 2 luminaire groups, each with up to 25 DSI,
DALI or dim²save compatible control
gear
■ DALI/DSI/dim²save control gear, no
mixed operation
■ ON / OFF / dimming (1–100 %)
■ Either motion detector function (only
off, on/off, corridor) or store/run one
light scene
■ Installation: fitted in luminaire or ceiling void with plug-on strain relief
(included)
L/W/H
Order no.
281/50/21
22 162 194
50
281
21
3
269
ø4
Order no.
Control device
DIMLITE daylight
281/50/21
22 162 195
80/80/24
20 731 906
Sensor
281
50
LSD Light sensor
21
3
269
ø4
LUXMATE BASIC/DIMLITE
H/Ø
Sensor (light) ceiling mounted
■
■
LSD Light sensor
24/80
20 731 906
80
24
■
The light sensor measures the daylight entering the room
Installation: surface-mounted on ceiling
For connecting to the local control
units.
Order no.
30°
Order no.
DIMLITE multifunction 2ch
70/90/59
22 161 822
87/87/13
87/87/13
119/57/28
22 154 657
22 154 658
22 154 450
53/53/15
22 154 681
80/80/24
104/104/42
104/104/42
22 154 682
22 161 823
22 154 506
Operation
ED-CCS 1/2/3 Li1/Li2 silver
ED-CCW 1/2/3 Li1/Li2 white
IRTOUCH Infrared remote control for ED-SENS sensor
Input device
ED-SDED2 4-channel input unit
Sensor
ED-EYE Light sensor
ED-IR Infrared sensor
ED-SENS Präsens + infrared sensor
59
35
90
70
L/W/H
Order no.
Control device
DIMLITE multifunction 4ch
140/90/59
22 161 824
87/87/13
87/87/13
119/57/28
22 154 657
22 154 658
22 154 450
53/53/15
22 154 681
80/80/24
104/104/42
104/104/42
22 154 682
22 161 823
22 154 506
Operation
ED-CCS 1/2/3 Li1/Li2 silver
ED-CCW 1/2/3 Li1/Li2 white
IRTOUCH Infrared remote control for ED-SENS sensor
Input device
ED-SDED2 4-channel input unit
Sensor
ED-EYE Light sensor
ED-IR Infrared sensor
ED-SENS Präsens + infrared sensor
140
59
35
DALI/DSI multifunction control unit, 4 channels, switch cabinet
■ Dims 4 luminaire groups
■ DALI/DSI/dim²save control gear, no
mixed operation, 50 DSI/dim²save or
25 DALI per channel
■ Modular light controller with variable
range of functions:
■ Daylight-based control using ED-EYE
■ Occupancy control using ED-SENS
■ Wireless control using IRTOUCH and
ED-IR/ED-SENS
■ Circle control point (3 scenes, 2
groups) with ED-CSx/ED-CCx
■ Four independent conventional
momentary-action switches can be
integrated via the ED-SDED2 (configured using rotary switch:4 lighting
scenes or 4 groups)
■ 1 relay output for disconnecting the
control gear from the supply
■ No commissioning (address-setting)
necessary (Broadcast mode)
■ Installed on EN rail 35 mm
L/W/H
Control device
90
DALI/DSI multifunction control unit, 2 channels, switch cabinet
■ Dimming of 2 luminaire groups
■ DALI/DSI/dim²save control gear, no
mixed operation, 50 DSI/dim²save or
25 DALI per channel
■ Modular light controller with variable
range of functions:
■ Daylight-based control using ED-EYE
■ Occupancy control using ED-SENS
■ Wireless control using IRTOUCH and
ED-IR/ED-SENS
■ Circle control point (3 scenes, 2
groups) with ED-CSx/ED-CCx
■ With ED-SDED2: Integration of 4
independent momentary-action switches (can be set via rotary switch: 4
lighting scenes or 2 groups)
■ 1 relay output for disconnecting the
control gear from the supply
■ No commissioning (address-setting)
necessary (Broadcast mode)
■ Installed on EN rail 35 mm
29
Order no.
Complete package for classrooms
■
■
■
■
■
25 11
87
59
80
24
Ø 56
140
30°
13
Ø 99
42
Ø 104
42
24
Ø 79
90
■
22 162 310
87
■
DIMLITE school KIT
35
■
Dims 4 luminaire groups
DALI/DSI/dim²save control gear, no
mixed operation, 50 DSI/dim²save or
25 DALI per channel
Includes all the components for a
classroom:
Daylight-based control using ED-EYE
Occupancy control using ED-SENS
Circle control point (3 scenes, 2
groups) with special classroom symbols
Four independent conventional
momentary-action switches can be
integrated via the ED-SDED2 (configured using rotary switch:4 lighting
scenes or 4 groups)
1 relay output for disconnecting the
control gear from the supply
Units already pre-configured; no commissioning / no addressing required
Installed on EN rail 35 mm
58
■
90
■
18
L/W/H
Phase dimmer (DSI/momentary-action switch), installed in luminaire/ceiling
■ Phase dimmer up to 500 VA max.
PDAX 500VA leading / trailing edge
■ Automatic load recognition (leading/
trailing edge control)
■ Control via DSI signal or momentary
action switch
■ Installation: in luminaire/in the ceiling
void
Order no.
167/42/31
22 154 307
167
42
31
143-148
Phase dimmer (DALI/DSI/momentary-action switch), installed in luminaire/ceiling
■ Phase dimmer up to 500 VA max.
APDX-500 leading / trailing edge
■ Automatic load recognition (leading/
trailing edge control)
■ Control via DALI/DSI signal or
momentary action switch
■ Installation: in luminaire/in the ceiling
void
DB Modules
105/90/59
6
Order no.
22 154 306
105
L/W/H
167/42/31
59
35
PDAS 1000VA leading / trailing edge
L/W/H
90
Phase dimmer (DSI/momentary-action switch), switch cabinet
■ Phase dimmer with a max. of 1000
VA
■ Automatic load recognition (leading/
trailing edge control)
■ With Preset function: stores and calls
up any light level
■ Control via DSI signal or momentary
action switch
■ Installed on EN rail 35 mm
Order no.
22 154 224
LUXMATE BASIC/DIMLITE
Phase dimmer (DALI/DSI/momentary-action switch)
■ Phase dimmer with max. 5000 VA
■ With Preset function: stores and calls
up any light level
■ Control via DALI/DSI signal or
momentary action switch
■ Installed in switch cabinet, with terminals facing downwards
APDS-1000 leading / trailing edge
L/W/H
DB Modules
105/90/59
6
Order no.
22 154 223
L/W/H
APDS-5000 leading edge
59
35
90
105
Order no.
156/220/100
22 154 264
156
145
100
220
140
Phase dimmer (DALI/DSI/momentary-action switch), switch cabinet
■ Phase dimmer with a max.
of 1000 VA
■ Automatic load recognition (leading/
trailing edge control)
■ With Preset function: stores and calls
up any light level
■ Control via DALI/DSI signal or
momentary action switch
■ Installed on EN rail 35 mm
130
Relay output (DSI), installed in luminaire/ceiling
■ 1 relay contact for switching luminaires and load circuits depending on
a programmable DSI actuating value
■ Switching capacity: 500 W / 200 VA
■ Installation: in luminaire/in the ceiling
void
L/W/H
DSI-RK
Order no.
190/30/28
86 449 304
190
28
30
4,5
180
L/W/H
DSI-ADX
Order no.
190/30/28
22 154 308
190
28
4,5
180
30
DSI control unit(1-10V), installed in luminaire/ceiling
■ For actuation of 50 DSI-compatible
control gear in conjunction with 1–10
V control voltages
■ Installation: in luminaire/in the ceiling
void
31
DSI control module (1-10V), switch cabinet
■ For controlling 100 DSI-compatible
control gear using 1–10 V control voltages
■ Installed on EN rail 35 mm
DSI-ADS
L/W/H
DB Modules Order no.
70/90/59
4
24 011 314
35
59
90
70
Order no.
DALI amplifier, installed in luminaire
■
■
For amplifying the DALI signal and
connecting an extra 64 DALI-compatible control gear
Installation: in luminaire/in the ceiling
void
No feedback on lamp faults
DALI-V
22 176 496
261
71
■
5
255
27
L/W/H
■
■
■
For amplification of the DSI signal and
connection of additional 50 DSI-controllable control gear
Installation: in luminaire/in the ceiling
void
No feedback on lamp faults
DSI-V
Order no.
230/30/28 20 975 705
230
28
4,5
219
30
DSI amplifier, installed in luminaire
ZBOX
Plug & play system for hotel rooms
LUXMATE LITENET / PROFESSIONAL
Plug & play lighting control system for hotel rooms, private dwellings and shops Beneficial lighting scenes at the touch of a button: the
all-inclusive package comprising a central control unit and four innovative
CIRCLE control points is fully pre-addressed – with optional connectors
for dimming, presence detection, door lock systems, blinds control and
building management systems.
LUXMATE EMOTION
ZBOX
HOTEL
Light for feeling at ease. Pre-configured lighting scenes can be called up at the
touch of a button on the CIRCLE control points supplied with the system.
DMX

www.zumtobel.com/zbox
ZBOX
ZBOX: Plug & Play
system for hotel rooms,
domestic areas and shops
Like an all-inclusive holiday
package, the ZBOX hotel room
package by Zumtobel, complete
with controller and four CIRCLE
control points, offers a large
number of conveniences and
benefits.
The package includes four control points, sufficient for a typical
hotel room. The standard packages can be supplemented with
additional control modules and
control points for larger rooms
or different types of application
areas.
35
Order no.
Includes 4 dimmer modules and 4 control points
ZBOX 4/300 CCB anthracite
ZBOX 4/300 CCS silver
ZBOX 4/300 CCW white
22 161 628
22 161 627
22 161 626
Includes 4 control points
ZBOX CCB anthracite
ZBOX CCS silver
ZBOX CCW white
22 161 620
22 161 619
22 161 618
Assessoires
INTO-1CCX mounting frame for 25mm plasterboard wall
INTO-CCX TOOL Pull-off tool
PC-RJ45 CROSS crossed network cable
ZBOX-DIMMER300
60
25 11
ø56
86
86
372
22 161 751
22 161 893
22 154 194
22 154 526
372
ZBOX package with Circle control point, square-edged design
■ Light contoller for hotel rooms;
includes Circle control point in
square-edge design
■ 8 lighting groups for switching by
means of relay contact and dimming
via DALI as well as slot for dimmer
module
■ ZBOX.Nightlogic for timed scene
settings (when networked with
Luxmate Professional)
■ 1 lighting group with RGB colour
sequence via DALI
■ 5 inputs for ZBOX Circle control
points
■ 1 motor channel for blinds
■ 2 inputs for key card and access
system
■ Includes 4 control points with symbol
set for 1 x room, 2 x bed, 1 x
bathroom
■ Plug & Play with preset scenes
■ ZBOX Webtool for simple configuration and scene creation via web
access
■ Stand-alone or linked to network via
LUXMATE Bus
13
Order no.
ZBOX phase dimmer
■
■
ZBOX easy package with Circle control point, square-edge design
■ Light contoller for hotel rooms;
includes Circle control point in
square-edge design
■ 8 lighting groups for switching by
means of relay contact and dimming
via DALI as well as slot for dimmer
module
■ ZBOX.Nightlogic for timed scene
settings (when networked with
Luxmate Professional)
■ 5 inputs for ZBOX Circle control
points
■ 2 inputs for key card and access
system
■ Includes 4 control points with symbol
set for 1 x room, 2 x bed, 1 x
bathroom
■ Plug & Play with preset scenes
■ ZBOX Webtool for simple configuration and scene creation via web
access
■ Stand-alone or linked to network via
LUXMATE Bus
ZBOX-DIMMER300
22 154 526
Order no.
Includes 2 dimmer modules and 4 control points
ZBOX easy 2/300 CCB anthracite
ZBOX easy 2/300 CCS silver
ZBOX easy 2/300 CCW white
22 176 323
22 176 321
22 176 322
Includes 4 dimmer modules and 4 control points
ZBOX easy 4/300 CCB anthracite
ZBOX easy 4/300 CCS silver
ZBOX easy 4/300 CCW white
22 176 326
22 176 324
22 176 325
Includes 4 control points
ZBOX easy 0/300 CCB anthracite
ZBOX easy 0/300 CCS silver
ZBOX easy 0/300 CCW white
22 176 320
22 176 328
22 176 319
372
60
25 11
86
ø56
■
Electrical accessories
Automatic load recognition (leading/
trailing edge control)
Automatic overload protection in
event of lamp fault
Max. output 300 VA
Can be plugged into slot 1 to 8 of
ZBOX Controller
86
■
372
■
13
ZBOX
ZBOX Circle control point, square-edge design, (blinds/light level)
■ Control point in square-edge design
for connecting to ZBOX controller
■ Three scene buttons and presence/
absence scene button
■ Individual buttons for control of
brightness and blinds
L/W/H
Order no.
Symbol set for room
ZBOX-CCB ROOM anthracite
ZBOX-CCS ROOM silver
ZBOX-CCW ROOM white
87/87/13
87/87/13
87/87/13
22 161 643
22 161 639
22 161 652
87/87/13
87/87/13
87/87/13
22 161 644
22 161 640
22 161 653
87/87/13
87/87/13
87/87/13
22 161 645
22 161 641
22 161 654
Symbol set for bedroom
ZBOX-CCB BED anthracite
ZBOX-CCS BED silver
ZBOX-CCW BED white
Symbol set for bathroom
ZBOX-CCB BATH anthracite
ZBOX-CCS BATH silver
ZBOX-CCW BATH white
25 11
87
Ø 56
87
13
ZBOX Circle control point, square-edge design (2x light-level)
■ Control point in square-edge design
for connecting to ZBOX controller
■ Three scene buttons and presence/
absence scene button
■ Individual buttons for brightness control
Order no.
Symbol set for room
ZBOX-CCB ROOM Li/Pe anthracite
ZBOX-CCS ROOM Li/Pe silver
ZBOX-CCW ROOM Li/Pe white
22 162 182
22 162 180
22 162 181
Symbol set for bedroom
ZBOX-CCB BED Li/Bo anthracite
ZBOX-CCS BED Li/Bo silver
ZBOX-CCW BED Li/Bo white
22 162 185
22 162 183
22 162 184
Symbol set for bathroom
ZBOX-CCB BATH Li/Co anthracite
ZBOX-CCS BATH Li/Co silver
ZBOX-CCW BATH Li/Co white
22 162 188
22 162 186
22 162 187
25 11
87
Ø 56
87
13
L/W/H
Order no.
Symbol set for corridor
87/87/13
87/87/13
87/87/13
22 161 646
22 161 642
22 161 638
25 11
87
Ø 56
ZBOX-CCB GO anthracite
ZBOX-CCS GO silver
ZBOX-CCW GO white
87
ZBOX Circle control point, square-edge design, corridor
■ Control point in square-edge design
for connecting to ZBOX controller
■ Button for running scene for person
in room/not in room
■ Individual button for brightness control
13
37
Order no.
Mounting frame for Circle control point
■
■
■
4-way input (switch/momentary-action switch), recessed
■ 4 independent conventional single
momentary-action light switches or
2 dual momentary-action switches
■ Function can be configured for each
input
■ 25 cm connecting cable
■ Installed in standard flush socket
22 161 751
INTO-CCX TOOL Pull-off tool
22 161 893
Please order extraction tool separately for non-scratch removal of control unit
162
92
Order no.
ZBOX-SDED2 (V) 4-way
22 176 497
39
15
■
INTO-1CCX mounting frame for 25mm plasterboard wall
Extractor tool
82
■
Installation box for flush-fitting control point in wall
25
■
Installation accessory for flush-fitting
one square-edge Circle control point
Stainless steel recessed frame
With adjusting screws for precise
horizonal alignment after installing in
unfinished wall structure
Standard 68 mm Ø cavity wall socket
included
For 25mm plasterboard wall
Constant shadow gap between control point and wall cut-out
Cutout size 92 x 92 mm
Ø 53
■
48,5
LUXMATE EMOTION
multi-room lightingmanagement
Especially in applications, in which the emotional qualities of light are important, the control and operating panel always ensures the appropriate
lighting scenery. In shops and stores, colour and dynamics increase customer frequency. With EMOTION, the wellness sector is transformed into
a sensuous and relaxing experience. In the office, pleasant and productive lighting solutions can be created throughout the room. Every lighting
scene, every combination of different luminaires and light sources can
be focused rapidly and accurately as required to support actual visual
tasks. The system is operated either via the CIRCLE touch panel marked
with easily comprehensible symbols specially designed by Matteo Thun,
or using conventional momentary-action switches.
LUXMATE EMOTION
LUXMATE LITENET / PROFESSIONAL
Good lighting is more than just bright The LUXMATE EMOTION
touch panel opens up additional opportunities for creativity in design:
mobile and coloured light, compositions using several light sources,
mixtures of direct and indirect light.
The local DALI-based lighting management system boosts the value of
boutiques, offices, medical practices, wellness areas, restaurants and bars.
DMX

www.zumtobel.com/emotion
LUXMATE EMOTION
Organisational talent for
static and dynamic lighting
scenery
If you prefer simplicity and clarity; if you are looking for an
Intelligent Lighting Management
System (title case) for individual
rooms or smaller architectural
units; if you want dynamics,
colour and design:
The EMOTION touch panel is an
operating and control unit in one
and offers:
– superior lighting comfort for
offices, banks, medical
practices, shops or production
facilities
– control and operation of up
to 2 X 64 DALI-compatible,
dimmable luminaires
– flexible management of groups
of luminaires
– programming and installation
without the use of special
equipment.
41
L/W/H
Order no.
Control and commissioning panel
EMOTION-Touch Standard full version
200/156/40
22 154 510
102/30/51
35/90/59
186/150/72
22 154 729
22 154 276
22 154 482
Accessories
EMOTION-BV2
EMOTION-BVS2
MKXP Touchpanel installation box
200
120
5
180
266
186
149,5
141,5
135
156
90
DALI touch panel (standard), wall-recessed
■ Standard full version including all
functions
■ DALI control and addressing unit for
up to 128 (2 x 64) DALI actuators
■ Definition of complex light shows and
sequences
■ For controlling special luminaires:
colour, colour-temperature and CTC
luminaires (Tempura)
■ Can be used with motion sensors and
infrared remote control units
■ Daylight-based control of luminaires
■ Advanced time-based control
■ Daytime natural-light simulation
(Motivation cycle, Pureline)
■ Data backup by SD (64 MB card
included)
■ Special image-guided setup manual
included on CD
■ Up to 32 groups and 16 scenes
■ Multi-room capability: up to 16 rooms
can be controlled
■ An additional 128 areas max. (multiple-room control)
40
72
LUXMATE EMOTION
|...| Shared properties
ED Circle control point, wallrecessed
■
■
■
■
3 lighting scenes
Dimming of 2 luminaire groups
Intuitive symbols for convenient operation
ED-Cxx 1/2/3 printed with „1“, „2“,
„3“ and 2x „Light level“
ED Circle control point, rounded-edge design, wall-recessed
■ |...|
■
■
Power supply via DALI line (3 DALI
loads)
Installed in single Euro socket, dimensions acc. to DIN 0606 (Ø 60 mm,
depth 42 mm), or UK metal backbox
(not included in supply)
■
■
No DALI addresses occupied
Variant (V): customised combination
of key sets from the intuitive LUXMATE icon collection (see page 84)
Order no.
Light level (2x)
ED-CSB 1/2/3 Li1/Li2 anthracite
ED-CSS 1/2/3 Li1/Li2 silver
ED-CSW 1/2/3 Li1/Li2 white
22 161 827
22 154 422
22 154 427
Variant
ED-CSB (V) anthracite
ED-CSS (V) silver
ED-CSW (V) white
22 154 674
22 154 672
22 154 673
25 11
86
Ø 56
86
13
ED Circle control point, square-edge design, wall-recessed
■ |...|
Order no.
Light level (2x)
ED-CCB 1/2/3 Li1/Li2 anthracite
ED-CCS 1/2/3 Li1/Li2 silver
ED-CCW 1/2/3 Li1/Li2 white
22 161 828
22 154 657
22 154 658
Variant
ED-CCB (V) anthracite
ED-CCS (V) silver
ED-CCW (V) white
22 154 668
22 154 666
22 154 667
25 11
87
Ø 56
87
13
Order no.
Mounting frame for Circle control point
■
■
■
■
■
Installation box for flush-fitting control point in wall
INTO-1CCX mounting frame for 25mm plasterboard wall
22 161 751
Extractor tool
INTO-CCX TOOL Pull-off tool
22 161 893
Please order extraction tool separately for non-scratch removal of control unit
162
82
■
Installation accessory for flush-fitting
one square-edge Circle control point
Stainless steel recessed frame
With adjusting screws for precise
horizonal alignment after installing in
unfinished wall structure
Standard 68 mm Ø cavity wall socket
included
For 25mm plasterboard wall
Constant shadow gap between control point and wall cut-out
Cutout size 92 x 92 mm
92
25
■
43
Order no.
Infrared remote control unit
■
■
■
4-way input (switch/momentary-action switch), recessed
■ 4 separate conventional single
momentary-action light switches or 2
double momentary-action switches
■ Function can be configured for each
input
■ 25 cm connecting cable
■ Installed in standard flush socket
■ 1 ED-SDED2 is equivalent to 2 DALI
loads
22 154 450
119
■
IRTOUCH Infrared remote control for ED-SENS sensor
57
28
Order no.
ED-SDED2 4-channel input unit
22 154 681
39
15
■
For control of up to 5 independent
groups (depending on system family
used)
3 lighting scenes
ON / OFF / dimming (1–100 %)
Housing made of grey polycarbonate
Only in conjunction with ED-SENS
part no. 22 154 506 or ED-IR part no.
22 161 823
When used in EMOTION installation,
must be configured using EMOTIONTouch, part no. 22 154 510
Ø 53
■
48,5
LUXMATE EMOTION
DSI converter (DALI), installed in luminaire/ceiling
■ For controlling 2 luminaire groups,
each with a max. of 25 DSI-compatibel control gear
■ 1 DALI-2DSI occupies 1 DALI load
■ Installation: in luminaire/in the ceiling
void
EMOTION-ANAS
L/W/H
DB Modules
72/90/64
4
Order no.
22 154 234
90
Analogue converter (DALI), switch cabinet
■ Units controlled using 0/1–10 V
system
■ Positioning of colour/dimming wheel
module for fibreoptic systems (BCD
switch addressed on projector: 650–
653)
■ Outputs: 0/1–10 V control voltage,
load contact (max. 5 A~, internally
linked with „L“)
■ Installed on EN rail 35 mm
■ Linear adjustment of dimming type
■ 1 analog converter is assigned to 1
DALI load
72
64
L/W/H
DALI-2DSI 2 outputs
Order no.
160/30/21
22 154 419
160
21
30
4,5
149
L/W/H
Phase dimmer (DALI) , switch cabinet
■
■
■
■
■
Phase dimmer with a max. of
1000 VA
Phase dimmer with DALI control
Automatic load recognition (leading/
trailing edge control)
1 dimmer occupies 1 DALI load
Installed on EN rail 35 mm
EMOTION-APDS 1000VA
Order no.
167/42/31
L/W/H
DB Modules
105/90/59
6
22 154 290
Order no.
22 154 291
105
59
35
EMOTION-APDX 500VA
90
Phase dimmer (DALI), installed in luminaire/ceiling
■ Phase dimmer up to 500 VA max.
■ Phase dimmer with DALI control
■ Automatic load recognition (leading/
trailing edge control)
■ Installation: in luminaire/in the ceiling
void
■ 1 dimmer occupies 1 DALI load
45
L/W/H
APDS-5000 leading edge
Order no.
156/220/100
22 154 264
156
145
100
220
140
Phase dimmer (DALI/DSI/momentary-action switch)
■ Phase dimmer with max. 5000 VA
■ Phase dimmer with DALI control
■ Installed in switch cabinet, with terminals facing downwards
■ 1 dimmer occupies 1 DALI load
130
L/W/H
Order no.
Relay output
EMOTION-1RUK 1 output
41/30/11
22 066 047
RC-GLIED
70 088 118
11
Relay output (EMOTION), installed in luminaire/ceiling
■ Relay contact for connecting luminaires and electrical consumers
■ 25 cm connecting cable
■ Current load 1 x 4 A (cosPHI = 1)
■ Installation: in ceiling void/dado trunking
■ Resistive loads only: incandescent
bulb 500 W HV halogen 500 W
■ 1 relay occupies 10 DALI loads
41
Relay output (DALI), switch cabinet
■
■
■
■
L/W/H
DB Modules
Order no.
105/90/59
6
22 154 262
0,1
70 088 118
Relay output
EMOTION-4RUKS 4 outputs
RC-GLIED
105
59
35
■
Control of luminaires and other loads
for mains voltages up to a maximum
of 230/240 V
4 relay outputs, each max. 10 A (CosPHI = 1)
A, PAR, QT 4 x 2.000 W T16/T26 with
low-l. ballast 4 x 920 W (parallel p.f.
corrected) TC with low-l. ballast 4 x
800 W (parallel p.f. corrected) T16/
T26/TC with electr. ballast 4 x 10 A
LV with transformer 4 x 10 A HIT,
SDW-T, HS, HM 4 x 800 W
Installed on EN rail 35 mm
1 relay is assigned to 1 DALI load
Universal interference suppression filters recommended for inductive/
capacitive loads (part no. 70088118)
90
■
30
LUXMATE EMOTION
L/W/H
EMOTION-BV2
Order no.
102/30/51
22 154 729
102
51
30
DALI power supply, installed in luminaire/ceiling
■ Power supply of 1 DALI line with a
max. of 100 DALI loads (1 DALI load:
2mA)
■ Installation: in ceiling void
■
■
Power supply of 1 DALI line with a
max. of 100 DALI loads (1 DALI load:
2mA)
Power loss: < 6 W
Installed on EN rail 35 mm
EMOTION-BVS2
DB Modules
35/90/59
2
Order no.
22 154 276
35
59
35
■
L/W/H
90
DALI power supply, switch cabinet
47
H/Ø
Sensor (light), surface-mount
Sensor (infrared, PIR), surface-mount/recessed
■ Combined PIR sensor with integrated
infrared interface
■ Power supplied via DALI line (EMOTION) or Control-In (DIMLITE)
■ Ceiling-mounted in Euro/standard
single back box; fitting accessories
for surface-mounting and flushmounting included
■ When used in EMOTION installation,
must be configured using EMOTIONTouch, part no. 22 154 510
■ EMOTION: does not occupy any DALI
addresses
Sensor (infrared), surface-mount/recessed
■ Infrared sensor for use with IRTOUCH
remote control (part no. 22 154 450)
■ Power supplied via DALI line (EMOTION) or Control-In (DIMLITE)
■ Ceiling-mounted in Euro/standard
single back box; fitting accessories
for surface-mounting and flushmounting included
■ When used in EMOTION installation,
must be configured using EMOTIONTouch, part no. 22 154 510
■ EMOTION: does not occupy any DALI
addresses
80
30°
Order no.
ED-SENS Präsens + infrared sensor
22 154 506
Ø 99
42
Ø 104
42
24
Ø 79
90
■
22 154 682
18
ED-IR Infrared sensor
Ø 99
42
Ø
H
Order no.
104
42
22 161 823
42
Ø 104
24
Ø 79
90
■
24/80
24
■
ED-EYE Light sensor
58
■
Light sensor (look out) for monitoring
daylight coming into the room
Power supplied via DALI line (EMOTION) or Control-In (DIMLITE)
Installation: surface-mounted on ceiling
EMOTION: does not occupy any DALI
addresses
When used in EMOTION installation,
must be configured using EMOTIONTouch, part no. 22 154 510
58
■
Order no.
18
LUXMATE LITENET / PROFESSIONAL
high-end room management system with lighting and blinds control
LUXMATE LITENET / PROFESSIONAL
The high-end room management systems combine 15 years’ experience in lighting management with future-proof system standards. They
flexibly respond to the building’s specific conditions and the customer’s
personal requirements in the long run. A wide range of functions are available for any area of application. Modifications and extra functions can
be added easily, also subsequently. Especially where intelligent functions
such as daylight-based lighting control and blinds, or automatic compensation for ageing of luminaires (“Maintenance Control”) are integrated,
the resulting significant reduction of energy consumption ensures short
payback periods.
Office investment properties with constantly changing requirements.
DMX

LITENET solution packages
Systems for 500 to 10,000 addresses
LITENET economy
Solution package for up to 500 output addresses
The smallest LUXMATE LITENET package is perfect for
smaller applications which require only 500 output addresses and do not need the entire range of functions available.
Hence no LITENET server is needed.
LITENET flexis N2
with server functionality
TCP/IP
LITENET compact
Solution package for up to 2,000 output addresses
Like a compact mid-range car, LUXMATE LITENET
compact offers a decent level of convenience without the
need to splash out on all the options available.
This solution, which is geared towards medium-sized
applications, also needs no LITENET server.
LITENET flexis N3
with server functionality
TCP/IP
LITENET flexible
Solution package for up to 10,000 output addresses
One central LITENET server is enough to achieve maximum flexibility and integrate 10,000 output addresses (or
more upon request). This high-end expansion level enables
separate IT and lighting management structures within one
building and includes the full range of LUXMATE LITENET
features.
LITENET server
TCP/IP
LITENET flexis N1
51
Sensor
Control points Windows
Screens
LUXMATE bus
LITENET netlink
Blinds
Control points
Sensor
Luminaires
DALI
3 x 64 addresses
PC with LITENET insite
management software
LITENET netlink
TCP/IP
Sensor
Control points Windows
Screens
LUXMATE bus
LITENET netlink
Blinds
Control points
Sensor
Luminaires
DALI
3 x 64 addresses
PC with LITENET insite
management software
LITENET netlink
TCP/IP
Sensor
Control points Windows
Screens
LUXMATE bus
LITENET flexis N1
LITENET netlink
Blinds
Control points
Sensor
Luminaires
DALI
3 x 64 addresses
PC with LITENET insite
management software
LITENET netlink
TCP/IP
LUXMATE LITENET
Order no.
Room automation system
LITENET flexis N1
22 161 749
SUP24VDC/1,5A 24V power supply
22 161 814
187
69
121
Room automation, flexible - controller 1000
■ Network-compatible automation processor for lighting and blinds for up
to 1000 LUXMATE outputs
■ Installed on EN rail 35 mm
■ Disabled functions enabled via flexcredits, if required
■ Credits can be withdrawn at any time
and used for other functions in the
LITENET installation
63
L/W/H
Room automation, economy - package
■
■
■
■
■
■
Network-compatible automation processor for lighting and blinds for up
to 500 LUXMATE outputs
Includes server components (software); no server (hardware) required
Includes LITENET insite single-user
management software
Installed on EN rail 35 mm
Optional PC control via LITENET
incontrol
Disabled functions enabled via flexcredits, if required
Credits can be withdrawn at any time
and used for other functions in the
LITENET installation
Order no.
Room automation system
LITENET flexis N2 economy package
187/121/63
22 154 456
SUP24VDC/1,5A 24V power supply
22 161 814
187
63
L/W/H
Room automation, compact - package
■
■
■
■
■
■
■
482/472/88
22 154 644
2
■
LITENET flexis N3 compact - package
Order no.
47
■
Network-compatible automation processor for lighting and blinds for up
to 2000 LUXMATE outputs
RAID1 fail-safe reliability
Includes server components (software); no server (hardware) required
Includes LITENET insite single-user
management software
Remote maintenance access
Case suitable for 19“ rack-mounting
or as desktop unit
Optional PC control via LITENET
incontrol
Optional OPC or BACnet interfaces
Disabled functions enabled via flexcredits, if required
Credits can be withdrawn at any time
and used for other functions in the
LITENET installation
88
■
69
121
■
482
Order no.
Credits
■
■
Inactive LITENET functions can be
enabled as required via Flex-Credits
(management software), e.g. daylightbased automation, enabling DOD
luminaires, emergency lighting visualisation etc.
Credits can be withdrawn at any time
and used for other functions in the
LITENET installation
LITENET flex-credit
22 154 449
53
Order no.
Software (planning)
■
■
■
■
Offline software (freeware) for planning a LITENET installation
Ste-by-step creation of building
structure
Easy configuration and parameterisation of installation features via predefined room profiles
The design result is a LITENET project
file, which is imported into the installation by the service engineer
LITENET inbuild (Freeware)
22 154 442
Order no.
Management software
■
■
■
■
Single-user licence for monitoring,
configuration and central control of a
LITENET installation
Display of fault signals
Analysis and installation documentation
Installation on any workstation within
the network
LITENET insite
22 154 444
LUXMATE LITENET
Software (schematic graphical user interface)
■ Schematic visualisation (LITENET Graphics basic)
■ Central visualisation, monitoring and
control of a LITENET installation
■ Continuous zoom for flexible navigation
■ Makes it quick and easy to locate
problems
■ Integral editor for customizing building views
■ Licence packages for
500/2000/10,000 addresses
Software (authentic graphical user interface)
■ Diagrams, photos and CAD drawings
provide excellent visualization of reallife situation
■ Central visualisation, monitoring and
control of a LITENET installation
■ Continuous zoom for flexible navigation
■ Integral layer manager
■ Makes it quick and easy to locate
problems
■ Integral editor for customizing building views
■ Licence packages for
500/2000/10,000 addresses
Operating software (running on network PC)
■ Browser software for intuitive control
of LUXMATE areas
■ Up to 20 scenes can be called up
■ Interface design (Skin) can be changed
■ for PC and MAC
■ Installation on LITENET server
■ Licence packages for
50/200/500/1000 users
Order no.
LITENET graphics basic 10000
LITENET graphics basic 2000
LITENET graphics basic 500
22 162 200
22 162 199
22 161 894
Design service available on request for designing the graphical visualization interface
Order no.
LITENET graphics advanced 10000
LITENET graphics advanced 2000
LITENET graphics advanced 500
22 162 203
22 162 202
22 162 201
Design service available on request for designing the graphical visualization interface
Order no.
LITENET incontrol 1000
LITENET incontrol 50
LITENET incontrol 200
LITENET incontrol 500
22 154 457
22 154 445
22 154 447
22 154 448
55
■
■
■
Software interface between LITENET
and a building services control system
Definition and transfer of data points
Transfer of information and functions
relating to system operation, status
display, display of alarms and events
and emergency lighting integration
Order no.
BACnet
■
■
|...|
Requirement for LITENET integration
using BACnet standard
LITENET BACnet 500
LITENET BACnet 1000
LITENET BACnet 3000
22 161 690
22 161 692
22 161 691
Order no.
OPC
■
■
|...|
Must be present in order to integrate
LITENET via the OPC standard
LITENET OPC 500
LITENET OPC 1000
LITENET OPC 3000
22 154 685
22 154 686
22 154 687
Order no.
Touchpanel
■
■
■
■
Software licence for interface to
touch-panel made by another manufacturer
Ethernet (TCP/IP) communication,
text-based
1 licence per installation
Max. 5 touch-panels per Flexis controller
LITENET TP-NetCom
22 154 716
L/W/H
■
■
■
■
■
■
For individual control of up to 3 x 64
DALI-compatible dimmable ballasts
that can be assigned any LUXMATE
address.
With integral DALI power supplies
With integral LM-BUS power supply
Ethernet (TCP/IP) network connection
Installed on EN rail 35 mm
For connecting an ED-SENS or EDEYE sensor
LITENET netlink
Order no.
210/105/59
22 154 451
210
105
DALI Gateway, switch cabinet
59
35
|...| Shared properties
BACnet and OPC
44
LUXMATE PROFESSIONAL
Centralised lighting
management can do
more than just switch and
control luminaires.
at the same time, the input of
heat into the building is reduced.
This saves up to 60 percent of
the energy used for lighting and
air conditioning systems.
Extensive interfaces allow easy
integration into a superordinate
LUXMATE PROFESSIONAL
automatically controls incident
daylight by controlling the blinds,
followed by automatic control of
the artificial lighting. Carefully
calculated algorithms ensure
optimum, glare-free lighting,
Building Management System.
Thanks to sophisticated control
and operating concepts, acceptance by users and system controllers is exceptionally high.
Schematic presentation of automation topology
Mains
LM bus
Office network
(TCP/IP)
LUXMATE network
(TCP/IP)
Internet
Monitoring of
emergency lighting
LMW-iSKIN
Office network, TCP/IP
Graphical user interface
LMW-GO
For example
Honeywell, Johnson
Controls, Landis & Staefa,
BACNET, K+P …
internal
modem
LRA-1500
LRA-1500
RS232
Systems of other
manufacturers/ building
management system
21
PC interface with relay
LM-PCSIR
Field bus 1
For information on components at the
LUXMATE bus, please refer to System
components section.
Mains
Bus supply
LM bus
Remote
maintenance
Server
LUXMATE network, TCP/IP
RS 232
BMS
LMPC-iSKIN
3
61
7
max. 18
(max.6 LRA-1500x / server
PC interface
module
LM-PCSIX
57
LUXMATE PROFESSIONAL
|...| Shared properties
Room automation
■
■
■
Automation unit for daylight-based
control of artificial light and blinds
Time management with conditions
link
Flexible super-room function
■
■
Status information and alarm lists
Optional licences can be downloaded
for additional functions
Order no.
Room automation 250
■
■
■
■
Room automation system
LRA-250 Package
22 161 934
Licences
LRA-BMS Interface for connecting an external system
LRA-RMA Use of an output under automatic control
22 147 157
22 147 014
Modem USB Analog-Extern
Modem USB ISDN - Extern
PC-ANYV
22 162 047
22 162 046
72 008 581
165
49,8
105
■
|...|
Up to 250 LUXMATE outputs can be
automated
Includes all necessary LRA-RMA
licences
Included in LRA-250 package: 1 x
LRA-250 automation unit, 1 x LMTLM external daylight sensor, 1 x LMPCSIR interface, 1 x PC-RS232 interface cable, 1 x SUP24VDC/1.5A
power pack
Installed on EN rail 35 mm
42
Order no.
Room automation 500
■
■
■
■
|...|
Up to 500 LUXMATE outputs can be
automated
Installed on EN rail 35 mm
The minimum quantity for first orders
of LRA-RMA licences is 100 units, for
subsequent expansion 50 units. No
daylight-based and time optimisation
possible without LRA-RMA licences.
Room automation system
LRA-500
22 161 933
Licences
LRA-BMS Interface for connecting an external system
LRA-RMA Use of an output under automatic control
22 147 157
22 147 014
Modem USB Analog-Extern
Modem USB ISDN - Extern
PC-ANYV
SUP24VDC/1,5A 24V power supply
22 162 047
22 162 046
72 008 581
22 161 814
69
121
187
63
Order no.
Room automation 1500/2500
LRA-1500 with ISDN modem
LRA-1500A with analog modem
22 162 053
22 162 052
for 2500 LUXMATE outputs
LRA-2500 with ISDN modem
LRA-2500A with analog modem
22 161 681
22 162 097
Licences
LRA-BMS Interface for connecting an external system
LRA-RMA Use of an output under automatic control
22 147 157
22 147 014
PC-4NETG 4-way network switch
PC-SBOX VGA switch box (4x)
PC-SBOK VGA cable
22 147 099
22 153 921
22 153 920
2
■
for 1500 LUXMATE outputs
47
■
|...|
Case suitable for 19“ rack-mounting
or as desktop unit
The minimum quantity for first orders
of LRA-RMA licences is 100 units, for
subsequent expansion 50 units. No
daylight-based and time optimisation
possible without LRA-RMA licences.
88
■
482
LUXMATE PROFESSIONAL
Order no.
LUXMATE server
■
■
■
■
■
Personal computer with LAN interface
for connection to the LUXMATE system
Software for running application programmes in customer networks
Exchange of data between management and automation level
Hardware matched to LUXMATE
requirements
By means of these software components, LUXMATE can be linked to
TCP/IP networks or central HVC units.
Personal Computer
PC-LAN19 With ISDN modem
PC-LAN19A with analog modem
22 161 935
22 162 070
Software
LMW-SRV Server software
20 975 190
Licences
LMW-SRVL Software licence LUXMATE server (local)
SRV-BMS Building management licence on server
22 145 519
22 145 525
59
|...| Shared properties
Software (operation)
■
■
■
Windows software for intuitive control
of LUXMATE areas
Up to 20 scenes can be called up
Interface design (Skin) can be changed
Operating software (running on local PC)
■ |...|
■ Control of all building services in the
area
■ Local installation on PC
■ Connection of the PC to the LUXMATE
bus via LM-PCSIX (PC interface,
desktop housing) and RS232 cable
(both included in the package supplied)
Operating software (running on network PC)
■ |...|
■ Control of all building services in the
area assigned to a user
■ Control via the Intranet
■ Central configuration and assignment
to areas
■ Installed on web server
■ Single-user licence
■ A max. of 100 licenses possible
(more licenses upon request)
■ Simultaneous access by a max. of
100 users (more users upon request)
■
Standard interface can be adjusted to
area (scene icons, output lists etc.)
Order no.
LMPC-iSKIN
22 154 288
Order no.
Software
LMW-iSKIN Licence for 1 client
22 154 030
Order no.
Software (graphical overview)
■
■
■
■
■
■
Central monitoring and control of
LUXMATE and ONLITE installations
Extremely easy navigation via building
views/zoom levels on the screen
All system events logged by means of
alarm list
ONLITE: automatic running of function
and duration tests
Editor for independent creation/
change of building views in the plan
file
GO-DP: minimum quantity for first
order: 100 off
Basic licences
LMW-1GO Software licence, 1 user
LMW-3GO Software licence, 3 users
LMW-5GO Software licence, 5 users
22 145 531
22 145 547
22 145 553
Extension licences
GO-ELZ Expansion licence (2 additional users)
LMW-GOE Editor for Graphical User Interface
22 145 566
24 046 228
Service
GO-DP Data point for graphical user interface
22 154 517
The units can be operated at
the LITENET and PROFESSIONAL automation systems.
They can also be operated as
an autonomous lighting control system without automation. This provides the basis
for the philosophy of decentralised control, according to
which the key functions and
setting values can be run and
stored in the respective field
units.
Programming/
control units
LM-EG
LM-CG
LM-CIRIA
Control
units
LM-BG
LM-SG
Circle
control units
LM-CSG
LM-CSM
LM-CSS
LM-CSW
IR remote
control unit
IRS
IRTOUCH
Momentaryaction switches /
switches
LM-4UAD
LM-SWE/D
LM-SCE/D
LM-SDE/D
Presence
detector
LM-4AWS
Presence
detector + receiver for IRTOUCH
ED-SENS
Receiver for
EnOcean wireless
switch
LM-RFR
Windows
LM-2FSE
Screen
LM-2LSE
Daylight actuators
LM-TLS
LM-2TL
Bus control
LM-BV
LM-BVS35
LM-BK
Bus interface
PCSIX
PCSIR
LM-SI03
Emergency lighting
Blind
LM-2JSE
LM-4JSP
LM-2JSM
LM-2JSMX
LM-2JDCX
JSW
Central units
Receiver
for IRS
IRED + LM-IRB
Lighting
actuators
LM-3DALIS
LM-DALIS
LM-DALI
LM-3DLIS
LM-DSI
LM-2DSI
LM-3DSIS
LM-IR2DSI
LM-BLS
LM-2ANAS
Motor control
Control
Lighting control
Control panel
LM-XPO
LM-CPO
LM-CPA
LM-MPO
Sensors
LUXMATE system components
make it possible to control
luminaires and blinds, send
control unit and sensor commands, and enable bus communication among units. In
building automation, these are
the field level units.
Control
LUXMATE system components
Room combination module
LM-RV
Meteorological
sensor input for
weather sensors
LM-4WZS
Daylight-based
control
Daylight
sensor
LM-TLM
Light sensor
LSD
Wind/rainbased control
Weather sensors
LM-SN
LM-SR
LM-ST
LM-SW
Relay outputs
LM-1RUK
LM-2RUK
LM-3RUKS
LM-4RUKS
Light sensor input
for LSD sensor
LM-4ILS
Section central
EPS 360
+
– +
–
SB128 local check
Integration for
lighting control via
LM-DALI /
LM-DALIS
Integration for
display in
Professional via
Nport 24
Time-based
control
LM-ZSM
LM-iZSQ
Multifunctional box
LM-TLX
LM-RLX
Dimmers
LM-PAD 1000
LM-PD 1000
Basic information on all units can be found in the product
descriptions on the following pages.
LUXMATE SYSTEM COMPONENTS
61
Operation
L/W/H
Touch panel, wall-recessed
■
■
■
■
■
■
■
■
Control panel for intuitive control and
programming of LUXMATE rooms
Up to 20 scenes can be configured
and called up
Can be used to operate up to 10
devices (lighting, blinds etc.)
User-configurable display (scene
icons, text etc.)
Fully enclosed housing with blackand-white glass front and plastic surround in black, white and chrome
Operated by touching the glass surface of the OLED display (capacitive
sensor); contains dimming ring and
ON-OFF button
Installed in single Euro box to DIN
0606 of minimum depth 50mm
Control device
For commissioning, configuration and
control of a complete LUXMATE installation
20 scenes can be configured and
called up
Control of all services in a room
Definition of control characteristics
and system points for artificial lighting and blinds
Plastic housing, halogen-free, white
(RAL 9003) or grey (RAL 7012)
Printed with pictographs and properties that can be specified (LM-EGi (V))
Includes mounting plate for 2 x or 3 x
Euro socket
Input device
For easy commissioning, configuration and control of a LUXMATE room
20 scenes can be configured and
called up
Control of 10 (groups of) luminaires,
3 (groups of) blinds, 1 (group of)
screen(s)
Plastic housing, halogen-free, white
(RAL 9003) or grey (RAL 7012)
Printed with pictographs and properties that can be specified (LM-CGi (V))
Includes mounting plate for 2 x or 3 x
Euro socket
Comfort control device
Order no.
200/156/40
200/156/40
200/156/40
200/156/40
22 146 153
22 154 195
22 154 196
22 154 405
186/150/72
22 154 482
Installation box
MKXP Touchpanel installation box
200
120
5
180
266
186
72
149,5
141,5
■
LM-CPA Colour TFT with enter/leave button
LM-CPO Colour TFT
LM-MPO Monochrome LCD
LM-XPO Colour TFT
135
■
Control panel for intuitive control and
programming of LUXMATE rooms
Control of all services in a room
Standard interface can be adjusted to
room (scene icons, room representation etc.)
Up to 20 scenes can be configured
and called up
easy configuration of sequences
Data backup by SD/MMC card
5.7“ display, resolution 320 x 240
dots
plastic frame, silver colour
Colour TFT (LM-CPO, LM-CPA) or
monochrome LCD touch screen (LMMPO)
LM-CPA with enter/leave button
LM-XPO for central control of up to
12 rooms
156
90
■
Touchpanel
40
L/W/H
LM-CIRIA wall-recessed control point
■
■
■
■
■
■
LM-CIRIA BK black
LM-CIRIA BK-CR black with chrome surround
LM-CIRIA WH white
Order no.
130/92/50
130/92/50
130/92/50
22 162 348
22 162 350
22 162 349
92
130
■
12,6
L/W/H
Input unit, wall-recessed
■
■
■
247/83/52
22 154 272
Variant
LM-EGi (V) printed white or grey
19
242
■
20 735 716
20 735 722
130
■
247/83/52
247/83/52
226
■
LM-EG unprinted, grey grey (RAL 7012)
LM-EG unprinted, white white (RAL 9003)
247
■
Order no.
L/W/H
Comfort unit, wall-recessed
■
■
Variant
LM-CGi (V) printed white or grey
247/83/52 22 154 273
19
83
242
■
247/83/52 22 154 271
247/83/52 22 154 270
130
■
LM-CG04 unprinted, grey grey (RAL 7012)
LM-CG04 unprinted, white white (RAL 9003)
Order no.
226
■
247
■
72,5
52
83
52
72,5
Operation
L/W/H
Wall-recessed user control unit
■
■
■
For easy configuration and control of
a LUXMATE room
3 scenes can be configured and
called up
Control of 2 (groups of) luminaires
and one (group of) blind(s) (LM-SG02)
or of 3 services as required (LM-SGi
(V))
Plastic housing, halogen-free, white
(RAL 9003) or grey (RAL 7012)
Printed with pictographs and properties that can be specified (LM-SGi (V))
Includes mounting plate for 2 x Euro
socket
Control device
22 115 067
22 115 073
180/83/52
22 154 274
Variant
LM-BGi (V) printed white or grey
L/W/H
Control unit, wall-recessed
■
■
LM Circle control point, square-edge design, wall-recessed
■ Control point for running 3 scenes,
and for controlling light level and
blinds
■ Printed with neutral symbols „1“, „2“
and „3“ for general applications
■ Certain auxiliary functions such as
saving of scenes, for instance, can be
enabled
■ Supplied from external 24 V DC
power pack or via LUXMATE bus
(counts as 14x bus load for LM-BV
bus supply etc.)
■ Installed in single Euro socket, dimensions acc. to DIN 0606 (Ø 60 mm,
depth 42 mm), or UK metal backbox
(not included in supply)
■ Variant (V): customised combination
of key sets from the intuitive LUXMATE icon collection (see page 84)
180/83/52
22 154 275
Variant
LM-SGi (V) printed white or grey
63
■
22 114 565
22 114 552
159
■
Order no.
180/83/52
180/83/52
180
■
LM-SG02 unprinted, grey grey (RAL 7012)
LM-SG02 unprinted, white white (RAL 9003)
72,5
83
L/W/H
Order no.
Light level and drapes
LM-CCB 1/2/3 Li/Be anthracite
LM-CCS 1/2/3 Li/Be silver
LM-CCW 1/2/3 Li/Be white
87/87/13
87/87/13
87/87/13
22 154 677
22 154 675
22 154 676
87/87/13
87/87/13
87/87/13
22 154 680
22 154 678
22 154 679
Variant
LM-CCB (V) anthracite
LM-CCS (V) silver
LM-CCW (V) white
INTO-1CCX mounting frame for 25mm plasterboard wall
INTO-CCX TOOL Pull-off tool
SUP24VDC/1,5A 24V power supply
22 161 751
22 161 893
22 161 814
25 11
87
87
■
175
72,5
83
175
■
180/83/52
180/83/52
63
■
LM-BG03 unprinted, grey grey (RAL 7012)
LM-BG03 unprinted, white white (RAL 9003)
159
■
For easy configuration and control of
a LUXMATE room
3 scenes can be configured and
called up
Control of 4 (groups of) luminaires
and 2 (groups of) blinds (LM-BG03) or
of 6 services as required (LM-BGi
(V)), e.g. air-conditioning outputs
Plastic housing, halogen-free, white
(RAL 9003) or grey (RAL 7012)
Printed with pictographs and properties that can be specified (LM-BGi (V))
Chain of LEDs for visualising „invisible“ interventions (e.g. temperature)
Includes mounting plate for 2 x Euro
socket
Order no.
180
■
User control device
Ø 56
LUXMATE SYSTEM COMPONENTS
13
63
LM rocker switch, square-edge design, wall-recessed
■ Control unit for 2, 3 or 4 individual
light groups
■ Printed with light symbol
■ Power supply via external 24 V DC
power supply or via LUXMATE bus
(3-times bus load for LM-BV bus supply etc.)
■ Installed in single Euro socket, dimensions acc. to DIN 0606 (Ø 60 mm,
depth 42 mm), or UK metal backbox
(not included in supply)
■ Version:
■ Switches printed with symbols for
blinds and combination of lighting
and blinds groups; symbols must be
defined with order
L/W/H
Order no.
2 rocker-switches, light
LM-RCB2 Li anthracite
LM-RCS2 Li silver
LM-RCW2 Li white
87/87/13
87/87/13
87/87/13
22 161 843
22 161 837
22 161 831
87/87/13
87/87/13
87/87/13
22 161 844
22 161 838
22 161 832
87/87/13
87/87/13
87/87/13
22 161 884
22 161 839
22 161 833
87/87/13
87/87/13
87/87/13
22 161 885
22 161 840
22 161 834
87/87/13
87/87/13
87/87/13
22 161 886
22 161 841
22 161 835
87/87/13
87/87/13
87/87/13
22 161 887
22 161 842
22 161 836
2 rocker-switches, option
LM-RCB2 (V) anthracite
LM-RCS2 (V) silver
LM-RCW2 (V) white
3 rocker-switches, light
LM-RCB3 Li anthracite
LM-RCS3 Li silver
LM-RCW3 Li white
3 rocker-switches, option
LM-RCB3 (V) anthracite
LM-RCS3 (V) silver
LM-RCW3 (V) white
4 rocker-switches, light
LM-RCB4 Li anthracite
LM-RCS4 Li silver
LM-RCW4 Li white
4 rocker-switches, option
LM-RCB4 (V) anthracite
LM-RCS4 (V) silver
LM-RCW4 (V) white
INTO-1CCX mounting frame for 25mm plasterboard wall
INTO-CCX TOOL Pull-off tool
SUP24VDC/1,5A 24V power supply
13
25 11
87
Ø 56
Ø 56
87
Ø 56
87
25 11
87
87
25 11
87
22 161 751
22 161 893
22 161 814
13
13
Order no.
Mounting frame for Circle control point
■
■
■
■
■
Installation box for flush-fitting control point in wall
INTO-1CCX mounting frame for 25mm plasterboard wall
22 161 751
Extractor tool
INTO-CCX TOOL Pull-off tool
22 161 893
Please order extraction tool separately for non-scratch removal of control unit
162
82
■
Installation accessory for flush-fitting
one square-edge Circle control point
Stainless steel recessed frame
With adjusting screws for precise
horizonal alignment after installing in
unfinished wall structure
Standard 68 mm Ø cavity wall socket
included
For 25mm plasterboard wall
Constant shadow gap between control point and wall cut-out
Cutout size 92 x 92 mm
92
25
■
LUXMATE SYSTEM COMPONENTS
|...| Shared properties
Circle control point, rounded-edge,
wall-recessed
■
■
■
Operation
Control point for running 3 scenes,
and for controlling light level and
blinds
Printed with neutral symbols „1“, „2“
and „3“ for general applications
Certain auxiliary functions such as
LM Circle control point, rounded-edge design, wall-recessed
■ |...|
■ Supplied from external 24 V DC
power pack or via LUXMATE bus
(counts as 14x bus load for LM-BV
bus supply etc.)
■
saving of scenes, for instance, can be
enabled
Installed in single Euro socket, dimensions acc. to DIN 0606 (Ø 60 mm,
depth 42 mm), or UK metal backbox
(not included in supply)
■
Variant (V): customised combination
of key sets from the intuitive
LUXMATE icon collection (see page
84)
L/W/H
Order no.
Light level and drapes
LM-CSB 1/2/3 Li/Be anthracite
LM-CSS 1/2/3 Li/Be silver silver (RAL 9007)
LM-CSW 1/2/3 Li/Be white white (RAL 9003)
86/86/13
86/86/13
86/86/13
22 161 829
22 154 213
22 154 211
86/86/13
86/86/13
86/86/13
22 161 830
22 154 178
22 154 175
Variant
LM-CSB (V) anthracite
LM-CSS (V) silver
LM-CSW (V) white
SUP24VDC/1,5A 24V power supply
22 161 814
25 11
86
Ø 56
86
13
ED Circle control point, rounded-edge design, wall-recessed
■ |...|
■ Power supply via DALI line (3 DALI
loads)
■ No DALI addresses occupied
■ For use with LM-3DALIS and LITENET
netlink
L/W/H
Order no.
Light level (2x)
ED-CSB 1/2/3 Li1/Li2 anthracite
ED-CSS 1/2/3 Li1/Li2 silver silver
ED-CSW 1/2/3 Li1/Li2 white white (RAL 9003)
86/86/13
86/86/13
86/86/13
22 161 827
22 154 422
22 154 427
86/86/13
86/86/13
86/86/13
22 154 674
22 154 672
22 154 673
Variant
ED-CSB (V) anthracite
ED-CSS (V) silver
ED-CSW (V) white
25 11
86
Ø 56
86
13
L/W/H
■
■
■
■
■
■
■
For easy configuration and control of
a LUXMATE room
ON / OFF / dimming (1–100 %)
3 scenes can be configured and
called up
Control of 5 services as required
Encoding switch for IR channel allocation
Plastic housing, halogen-free, grey
(RAL 7021)
Includes wall bracket and batteries
IRS Infrared remote control
IRTOUCH Infrared remote control for ED-SENS sensor
Order no.
119/57/28
119/57/28
20 975 492
22 154 450
119
Infrared remote control
57
28
LUXMATE SYSTEM COMPONENTS
|...| Shared properties
Input (momentary-action/standard
switch...) control cabinet
■
■
■
65
Input devices
4 inputs for momentary-action and
standard switches, motion detectors
and other contact-makers
Change between „Absent“ and „Present“ scenes
For assigning inputs to rooms or indi-
■
■
■
vidual groups
Adjustable switch-off delay
Installed on EN rail 35 mm
In the LM-4UAS multifunction unit,
the functions and properties of the
inputs can be modified using the
■
■
additional commissioning tool
Version:
Different functions and properties can
be specified when ordering
L/W/H
Input (momentary-action switch/standard switch etc.) 230V, switch cabinet
Four
momentary-action
switch
inputs
for
scene
changing
■ |...|
LM-SCE
70/90/59
■ for 230/240V AC mains voltage
DB Modules
Order no.
4
20 975 063
4
20 975 085
Two switch inputs for scene changing
LM-SWE
70/90/59
Four momentary-action switch inputs for scene changing and dimming
LM-SDE
70/90/59
4
20 975 079
4
22 154 488
70/90/59
4
22 154 621
70/90/59
4
22 154 732
70/90/59
4
22 154 731
4 motion-detector inputs for scene changing
LM-4AWS
70/90/59
2-way double momentary action switch for operating blinds
LM-SJE
Four universal inputs
LM-4UAS
Variant
LM-4UAS (V)
L/W/H
DB Modules
Order no.
70/90/59
4
22 154 734
70/90/59
4
22 154 733
Four universal inputs
LM-4UAS2 24V AC
Variant
70
59
35
LM-4UAS2 (V) 24V AC
90
Input (momentary-action switch/switch) 24V, switch cabinet
■ |...|
■ for 24V AC operating voltage
59
35
90
70
LUXMATE SYSTEM COMPONENTS
Input devices
H/Ø
Input (momentary-action switch/standard switch etc.), installed in luminaire/ceiling
Two
momentary-action
switch
inputs
for
scene
changing
■ 2 inputs for momentary-action and
LM-SCED
15/53
standard switches, motion detectors
Single switch input for scene changing
and other contact-makers
LM-SWED
15/53
■ Change between „Absent“ and „Present“ scenes
Two momentary-action switch inputs for scene changing and dimming
■ For assigning inputs to rooms or indiLM-SDED
15/53
vidual groups
Blinds operation using two-way momentary-action switch; single unit
■ Supplied via LUXMATE bus
LM-SJED
15/53
■ Installed in backbox behind switch
Screen operation using two-way momentary-action switch; single unit
■ Version:
LM-SLED
15/53
■ Different functions and properties can
Window operation using two-way momentary-action switch; single unit
be specified when ordering
LM-SFED
Order no.
24 046 764
20 975 022
20 975 016
20 975 524
24 046 663
15/53
22 154 095
15/53
15/53
15/53
24 046 820
24 046 792
24 046 836
Variant
LM-SCED (V)
LM-SDED (V)
LM-SWED (V)
13
15
39
Ø 53
48,5
Order no.
LM-4UAD
15/53
22 154 508
15/53
22 154 515
Variant
LM-4UAD (V)
MBUE Mounting plate for EIB monentary-action switch
SUP24VDC/1,5A 24V power supply
22 154 516
22 161 814
39
13
Ø 53
48,5
L/W/H
Order no.
Infrared input
LM-IRB
230/30/28
22 114 219
IRED Infrared sensor, surface-mount
IRS Infrared remote control
80/80/26
119/57/28
22 114 587
20 975 492
230
28
4,5
219
30
Infrared input, installed in luminaire/ceiling
■ For converting infrared signals of a
maximum of 2 IRS infrared remote
control units into LUXMATE bus commands
■ Installation: in luminaire/in the ceiling
void
H/Ø
Universal input
15
Universal input (momentary-action switch), installed in luminaire/ceiling
■ For electronic and EIB/KNX switch 1 x
– 4 x with LED
■ Change between „Absent“ and „Present“ scenes
■ Dimming of room lighting or a group
of luminaires
■ Feedback via LED key switch
■ Assignment to room or group of
rooms
■ Supply via external 24 V DC power
pack or via LUXMATE bus (13-fold
bus load for LM-BV bus supply etc.)
■ Connection via 10-pole plug-in connector
■ Installed behind switch in back box
(35 mm)
LUXMATE SYSTEM COMPONENTS
67
Light actuators
DALI control unit (LM-bus), installed in luminaire/ceiling
■ For individual control up to 64 DALIcompatible control gears to which any
LUXMATE address may be assigned.
■ Installation: in luminaire/in the ceiling
void
L/W/H
LM-DALI
Order no.
230/30/28
22 146 950
230
28
30
4,5
219
DALI control module (LM-bus), switch cabinet
■ For individual control up to 64 DALIcompatible control gears to which any
LUXMATE address may be assigned.
■ Installed on EN rail 35 mm
LM-DALIS
L/W/H
DB Modules
105/90/59
6
Order no.
22 146 963
DB Modules
210/105/59
12
Order no.
22 154 455
59
35
105
210
44
LM-3DLIS 3 DALI outputs
L/W/H
DB Modules
140/90/59
8
Order no.
22 154 096
140
59
35
DALI control module (LM-bus, momentary-action switch), switch cabinet
■ For connection of a max. of 64 DALI
dimmable ballasts per output
■ All DALI ballasts connected to the
same output are switched and dimmed synchronously
■ Key switch input for calling up scenes
■ Installed on EN rail 35 mm
LM-3DALIS
L/W/H
90
DALI control module 3x (LM-bus), switch cabinet
■ For individual control of up to 3 x 64
DALI-compatible dimmable ballasts
that can be assigned any LUXMATE
address.
■ With integral DALI power supplies
■ Installed on EN rail 35 mm
■ For connecting an ED-SENS or EDEYE sensor
59
35
90
105
LUXMATE SYSTEM COMPONENTS
Light actuators
LM-3DSIS 3 DSI outputs
L/W/H
DB Modules
140/90/59
8
DSI control unit (LM-bus), installed in luminaire/ceiling
■ For connection of a max. of 10 digital
control gear per output
■ Installation: in luminaire/in the ceiling
void
■ LM-BLS: to control light centre of
Balanced Light luminaires
Order no.
22 114 395
140
L/W/H
LM-2DSI 2 outputs
LM-BLS 2 outputs
LM-DSI 1 output
59
35
90
DSI control module (LM-bus), switch cabinet
■ For connection of a max. of 100 digital control gear per output
■ Operated manually by using momentary-action switch
■ Installed on EN rail 35 mm
Order no.
230/30/28
230/30/28
230/30/28
20 975 799
20 975 310
20 975 301
230
28
30
4,5
219
L/W/H
Order no.
Control device
LM-IR2DSI 2 outputs
230/30/28
22 114 231
IRED Infrared sensor, surface-mount
IRS Infrared remote control
80/80/26
119/57/28
22 114 587
20 975 492
230
28
4,5
219
30
DSI control unit (LM-bus, infrared), installed in luminaire/ceiling
■ For connection of a max. of 10 digital
control gear per output
■ For converting infrared signals into
LUXMATE bus commands
■ Installation: in luminaire/in the ceiling
void
69
Light actuators
LM-2ANAS
L/W/H
DB Modules
105/90/59
6
105
Phase dimmer (LM-bus) , switch cabinet
■
■
■
Phase dimmer with a max. of
1000 VA
Controlled directly via LUXMATE bus
Installed on EN rail 35 mm
Order no.
22 115 166
90
Analogue control module (LM-bus), switch cabinet
■ For control of 2 mutually independent
luminaire groups with analog control
gear
■ Additional 16 A switching contact per
output
■ Installed on EN rail 35 mm
LM-PAD 1000VA TRAILING edge control
LM-PD 1000VA LEADING edge control
59
35
LUXMATE SYSTEM COMPONENTS
L/W/H
DB Modules
140/90/59
140/90/59
8
8
Order no.
22 115 095
22 115 089
35
Phase dimmer (DALI/DSI/momentary-action switch), installed in luminaire/ceiling
■ Phase dimmer up to 500 VA max.
APDX-500 leading / trailing edge
■ Automatic load recognition (leading/
trailing edge control)
■ Control via DALI/DSI signal or
momentary action switch
■ Installation: in luminaire/in the ceiling
void
59
90
140
L/W/H
Order no.
167/42/31
22 154 224
167
42
31
143-148
DB Modules
105/90/59
6
Order no.
22 154 223
105
59
35
APDS-1000 leading / trailing edge
L/W/H
90
Phase dimmer (DALI/DSI/momentary-action switch), switch cabinet
■ Phase dimmer with a max. of
1000 VA
■ Automatic load recognition
(leading/trailing edge control)
■ With Preset function: stores and calls
up any light level
■ Control via DALI/DSI signal or
momentary action switch
■ Installed on EN rail 35 mm
Light actuators
Phase dimmer (DALI/DSI/momentary-action switch)
■ Phase dimmer with max. 5000 VA
■ With Preset function: stores and calls
up any light level
■ Control via DALI/DSI signal or
momentary action switch
■ Installed in switch cabinet, with terminals facing downwards
L/W/H
APDS-5000 leading edge
Order no.
156/220/100
22 154 264
156
145
100
220
140
LUXMATE SYSTEM COMPONENTS
130
L/W/H
LM-1RUK 1 output
LM-2RUK 2 outputs
Order no.
230/30/28
230/30/28
22 115 010
22 114 777
230
28
4,5
30
Relay output (LM-bus), installed in luminaire/ceiling
■ For switching luminaires and electrical loads
■ Installation: in luminaire/in the ceiling
void
■ LM-2RUK with 2 independently
switchable contacts
■ Max. total current load of both
contacts 8 A
219
■
140/90/59
105/90/59
8
6
140
20 735 397
22 154 120
59
35
90
■
LM-3RUKS 3 outputs
LM-4RUKS 4 outputs
Order no.
105
59
L/W/H
DSI converter (EIB)
■
279/40/29
72/90/65
279
72
65
28
L/W/H
DSI amplifier, installled in luminaire
■
■
For amplification of the DSI signal and
connection of additional 50 DSI-controllable control gear
Installation: in luminaire/in the ceiling
void
20 827 097
24 030 297
40
■
DSI-EIB Installed in luminaire
DSI-EIBS Installed in switch cabinet
35
■
For controlling 50 DSI-compatible
control gear
Switching, dimming, status inquiry
as well as fault reports
Installation: in ceiling void/in luminaire (DSI-EIB) or on EN rail 35 mm
(DSI-EIBS)
The EIBP product database for commissioning using the EIBA tool software (ETS) can be downloaded from
www.Zumtobel.com
90
■
Order no.
Converters
DSI-V
Order no.
230/30/28
20 975 705
230
28
4,5
219
30
■
For switching luminaires and
electrical loads
Installed on EN rail 35 mm
LM-3RUK with 3 independently
switchable contacts, 16 A each
LM-4RUKS with 4 separately switchable contacts, 10 A each (cosPhi = 1)
DB Modules
35
■
L/W/H
90
Relay output (LM-bus), switch cabinet
71
Daylight actuators
L/W/H
Order no.
Control device
LM-2TL DALI
230/30/28
22 146 131
80/80/24
20 731 906
Sensor
LSD Light sensor
230
28
4,5
80
24
DALI control unit (LM-bus, sensor, PD), installed in luminaire/ceiling
■ For individual rooms, for direct daylight-based control of up to 2 x 10
DALI dimmable ballasts.
■ All DALI ballasts connected to the
same output are switched and dimmed synchronously
■ Presence detector can be connected
■ Installation: in luminaire/in the ceiling
void
30
LUXMATE SYSTEM COMPONENTS
219
L/W/H
Order no.
Control device
LM-2TL
230/30/28
22 114 880
80/80/24
20 731 906
Sensor
LSD Light sensor
230
28
80
30
4,5
24
DSI control unit (LM-bus, sensor, PD), installed in luminaire/ceiling
■ For individual rooms, for direct daylight-based control of up to 2 x 10
digital control gear
■ Presence detector can be connected
■ Installation: in luminaire/in the ceiling
void
30°
219
L/W/H
DB Modules
140/90/59
8
22 154 141
80/80/24
0,1
20 731 906
59
Order no.
80
24
140
35
90
30°
DSI control module (LM-bus, sensor, momentary-action switch, switch), switch cabinet
Control device
■ For individual rooms, for direct dayLM-TLS
light-based control of up to 3 x 100
Sensor
digital control gear
LSD Light sensor
■ Additional connections for: ON/OFF,
manual/automatic and dimming keys
■ Operated manually by using momentary-action switch
■ Installed on EN rail 35 mm
L/W/H
DB Modules
140/90/59
8
20 735 356
80/80/24
0,1
20 731 906
59
80
90
24
140
Order no.
35
DALI control module (LM-bus, sensor, momentary-action switch, switch), switch cabinet
Control device
■ For individual rooms, for local dayLM-TLS DALI
light-based control of a max. of 3 x
Sensor
64 DALI-compatible control gear
LSD Light sensor
■ All DALI ballasts connected to the
same output are switched and dimmed synchronously
■ Operated manually by using momentary-action switch
■ Additional connections for: ON/OFF,
manual/automatic and dimming keys
■ Installed on EN rail 35 mm
30°
30°
Multifunction boxes
L/W/H
Order no.
Control device
LM-TLX DALI RJ45 9 DALI outputs
LM-TLX RJ45 9 DSI outputs
305/258/55
305/258/55
22 154 489
22 115 147
28/28/21
50/40/15
22 154 294
22 154 219
Sensor
350
59
305
55
258
LUE AC1 Current sensor for HF emergency lighting
LUE DC1 Current sensor for DC emergency lighting
458
DSI/DALI control unit (LM-bus, momentary-action switch...), ceiling void
■ For daylight-based control of up to 9
luminaire groups with up to 2 digital
ballasts per group
■ 2 outputs for emergency luminaires
(self-contained)
■ 1 input for LSD light sensor
■ 2 inputs for PST presence detector or
for manual control via double
momentary-action switch or emergency lighting sensor
■ Installation: in ceiling void
mit Stecker / with plugs
LUXMATE SYSTEM COMPONENTS
505
mit Stecker / with plugs
Order no.
LM-TLX Hardwired 6 DSI outputs
365/470/55
70 389 744
28/28/21
50/40/15
22 154 294
22 154 219
Sensor
LUE AC1 Current sensor for HF emergency lighting
LUE DC1 Current sensor for DC emergency lighting
365
470
415
55
L/W/H
Order no.
Relay output
LM-RLX 9 outputs
290/265/59
22 154 049
28/28/21
50/40/15
22 154 293
22 154 220
Sensor
LUE AC2 Current sensor for HF emergency lighting
LUE DC2 Current sensor for DC emergency lighting
290
59
243
55
265
465
Relay output (LM-bus, momentary-action switch...), ceiling void
■ For switching a max. of 9 luminaire
outputs with an installed load of 250
W per luminaire output
■ 2 outputs for emergency luminaires
(self-contained)
■ 2 inputs for PST presence detector
■ 2 inputs for manual control via double
momentary action switch or emergency lighting sensor
■ Installation: in ceiling void
L/W/H
Control device
mit Stecker / with plugs
DSI control module (LM-bus, momentary-action switch...) ceiling void
■ For daylight-based control of up to 6
luminaire groups with up to 5 digital
ballasts in each group
■ 2 outputs for emergency luminaires
(self-contained)
■ 1 input for LSD light sensor
■ 2 inputs for PST presence detector or
for manual control via double
momentary-action switch or emergency lighting sensor
■ Inputs and outputs are wired to screw
terminals
■ Installation: in ceiling void
443
mit Stecker / with plugs
L/W/H
Order no.
Relay output
LM-RLX Hardwired 4 outputs
305/470/55
70 088 193
28/28/21
50/40/15
22 154 293
22 154 220
Sensor
55
305
415
LUE AC2 Current sensor for HF emergency lighting
LUE DC2 Current sensor for DC emergency lighting
470
Relay output (LM-bus, momentary-action switch...) ceiling void
■ For switching up to 4 luminaire outputs with installed load of 500 W per
luminaire output
■ 2 outputs for emergency luminaires
(self-contained)
■ 2 inputs for PST presence detector
■ 2 inputs for manual control via double
momentary action switch or emergency lighting sensor
■ Inputs and outputs are wired to screw
terminals
■ Installation: in ceiling void
73
Motor actuators
Blinds control module (LM-bus, momentary-action switch), switch cabinet
■ For controlling 2 separate AC drives,
suitable for blinds with 3 mechanical
end switches
■ 2 lokal momentary-action switch
inputs
■ Installed on EN rail 35 mm
■ Travelling up / down and slat positioning relative to position of sun using
higher-order automation systems
Order no.
140/90/59
6
22 114 783
140/90/59
6
22 154 216
Variant
LM-2JSE (V)
35
59
90
105
Order no.
LM-4JAS
22 162 346
70
35
71
L/W/H
LM-2JSMX
Order no.
205/70/50
20 975 587
205
48
Ø 4,5
186
198
47
50
LM-2JSM
L/W/H
DB Modules
140/90/59
8
Order no.
24 046 616
140
59
35
Blinds control module (LM-bus, momentary-action switch)
■ For controlling 2 separate AC drives,
suitable for blinds with 3 mechanical
end switches
■ 2 lokal momentary-action switch
inputs
■ Installation: in ceiling void/dado trunking
■ Travelling up / down and slat positioning relative to position of sun using
higher-order automation systems
DB Modules
70
Blinds control unit 4x (LM-bus), control cabinet
■ For controlling 4 separate ac drives;
suitable for window hangings fitted
with 2 mechanical limit switches
■ Travelling up / down and slat positioning relative to position of sun using
higher-order automation systems
■ Installed on EN rail 35 mm
LM-2JSE
L/W/H
90
Blinds control module (LM-bus), switch cabinet
■ For controlling 2 separate AC drives
■ Intermediate position manually adjustable
■ Installed on EN rail 35 mm
■ Version:
■ For the LM-2JSE (V) it can be indicated which of the 3 control philosophies is to be enabled for the
momentary action switch
■ For the LM-2JSE (V), the duration of
the output‘s timeout can be indicated
90
LUXMATE SYSTEM COMPONENTS
Motor actuators
L/W/H
LM-2JDCX
Order no.
205/70/50
22 114 827
205
Ø 4,5
186
198
47
70
Blinds control module DC (LM-bus, momentary-action switch)
■ For controlling 2 separate DC drives
■ 2 lokal momentary-action switch
inputs
■ Installation: in ceiling void/dado trunking
■ Travelling up / down and slat positioning relative to position of sun using
higher-order automation systems
48
LUXMATE SYSTEM COMPONENTS
50
Window control module (LM-bus), switch cabinet
■ For controlling 2 separate AC drives
■ Installed on EN rail 35 mm
LM-2FSE
L/W/H
DB Modules
105/90/59
6
Order no.
22 114 903
Screen control module (LM-bus), switch cabinet
■ For controlling 2 separate AC drives
■ Installed on EN rail 35 mm
LM-2LSE
59
35
90
105
L/W/H
DB Modules
105/90/59
6
Order no.
22 114 912
■
■
For joint control of a number of AC
drives using the LM-2JSE, LM-2FSE,
LM-2LSE control units
1 input, 4 outputs
Installed on EN rail 35 mm
JSW
L/W/H
DB Modules
70/90/59
4
Order no.
20 975 106
70
59
35
■
90
Motor extension module, switch cabinet
59
35
90
105
LUXMATE SYSTEM COMPONENTS
75
Central devices
Bus supply room, switch cabinet
■
■
For voltage supply to a bus domain
with a maximum of 35 terminal points
Installed on EN rail 35 mm
LM-BVS35
L/W/H
DB Modules
35/90/59
2
Order no.
22 115 026
Bus supply building, switch cabinet
■
■
For voltage supply to a bus domain
with a maximum of 100 terminal
points
Installed on EN rail 35 mm
LM-BV
59
35
90
35
L/W/H
DB Modules
105/90/59
6
Order no.
20 975 247
Bus coupler, switch cabinet
■
■
■
For linking of bus domains
Achieves electrical isolation of bus
domains without data filtering
Installed on EN rail 35 mm
LM-BK
59
35
90
105
L/W/H
DB Modules
140/90/59
8
Order no.
20 735 369
59
35
90
140
Order no.
Remote maintenance
■
■
Encrypted VPN link with user name
and password
8-Port 10/100 Fast Ethernet Switch
Firewall
PC-ROUTER VPN VPN access via the Internet
22 162 071
201
45
175
■
LUXMATE SYSTEM COMPONENTS
Central devices
Interface, switch cabinet
■
■
For connecting a LUXMATE field bus
to the LRA-1500(x) or LRA-250 room
automation processor
Installed on EN rail 35 mm
L/W/H
DB Modules
Order no.
105/90/59
6
22 114 799
0,1
03 920 218
Interface
LM-PCSIR
PC-RS232 Interface cable
AV interface, switch cabinet
■
■
For coupling touch panels and AV
systems via RS232 interface
Installed on EN rail 35 mm
LM-SI03
59
35
90
105
L/W/H
DB Modules
70/90/59
4
Order no.
20 975 530
Time control module, switch cabinet
■
DB Modules
70/90/59
4
70
LM-iZSQ
L/W/H
DB Modules
70/90/59
4
59
Order no.
22 154 152
70
90
Sequence control unit package, switch cabinet
■ Package for configuration of dynamic
sequences of scenes
■ For configuring, copying and filing
sequences
■ Definition of start and stop times,
number of runs, time intervals, dissolve speeds
■ Control unit plus Windows configuration software plus RS232 cable
■ Installed on EN rail 35 mm
Order no.
20 735 510
90
■
LM-ZSM
L/W/H
35
■
For time-based control of the LUXMATE system
Programmable date and time
70 switching times with selectable
dissolve speeds
Installed on EN rail 35 mm
59
35
■
59
35
90
70
LUXMATE SYSTEM COMPONENTS
77
Central devices
H/Ø
Radio aerial
■
■
For LM-ZSM time control or LM-ZSQ
sequencer control module
Installation: outside the switch cabinet using 2 metal catches
ZSMA
Order no.
165/30
20 975 225
30
165
Sensor input (LSD), switch cabinet
■
■
■
LM-4ILS sensor input 4x for LSD interior light sensors
Unit pre-configured for connection of
sensors
Installed on EN rail 35 mm
L/W/H
DB Modules
Order no.
105/90/59
6
22 154 258
80/80/24
0,1
20 731 906
Sensor input
LM-4ILS for LSD indoor light sensor
Sensor
LSD Light sensor
59
80
35
90
24
105
30°
Sensor input (weather), switch cabinet
■
■
■
Sensor input
Installed on EN rail 35 mm
LM-4WZS
LM-4WZS sensor input 4x for wind
speed and direction, outside tempera- Variant
LM-4WZS (V)
ture and precipitation
LM-SB: basic sensor package for ins- Sensor
tallation of wind speed, wind direcLM-SN Precipitation sensor
tion, outside temperature and precipi- LM-SR Wind direction sensor
LM-ST Temperature sensor
tation sensors. For each LM-4WZS,
LM-SW Wind speed sensor
one basic package is required.
L/W/H
DB Modules
Order no.
105/90/59
6
22 154 128
105/90/59
6
22 154 305
0,1
0,1
0,1
0,1
22 154 283
22 154 285
22 154 284
22 154 286
0,1
22 154 282
Basic package
LM-SB Basic package sensor installation
■
■
For management of 2 partitions using
an end switch
Controls affect the entire room or the
divided-off area of the room
Installed on EN rail 35 mm
LM-RV Room combination module
L/W/H
DB Modules
70/90/59
4
Order no.
24 046 467
70
59
35
■
90
Room linking device, switch cabinet
59
35
90
105
LUXMATE SYSTEM COMPONENTS
Sensors
H/Ø
Sensor (light) outdoor
■
■
LM-TLM
310/350
20 724 105
355
130
■
External daylight sensor for measuring daylight levels for daylight-based
adjustment of artificial lighting and
position of blinds (slats)
Installed on pole Ø 42–50 mm
Used in conjunction with LRA-1500(x)
and LRA-150S
Order no.
105
H/Ø
Sensor (light) surface-mount
■
■
LSD Light sensor
24/80
20 731 906
80
24
■
The light sensor measures the
daylight entering the room
Installation: surface-mounted on
ceiling
For connecting to the local control
units.
Order no.
30°
H/Ø
ED sensor (light), surface-mount
■
■
■
■
The light sensor measures the
daylight entering the room
Power supply via DALI line (2 DALI
loads)
Installation: surface-mounted on
ceiling
No DALI addresses occupied
For use with LM-3DALIS and LITENET
netlink
ED-EYE Light sensor
Order no.
24/80
22 154 682
80
24
■
30°
H/Ø
Sensor (infrared), surface-mount
■
Installation: surface-mounted on
ceiling
For use with LM-IRB and LM-IR2DSI
infrared input modules
Order no.
Sensor
IRED Infrared sensor, surface-mount
26/80
22 114 587
IRS Infrared remote control
28/57
20 975 492
Ø 80
26
■
LUXMATE SYSTEM COMPONENTS
79
Sensors
H/Ø
Sensor (radio) surface-mount/recessed
■
■
■
■
■
Radio receiver picks up switch commands from up to 60 EnOcean
momentary-action switches within
specified receive radius
Range approx. 10 metres
Housing: halogen-free white plastic
(RAL 9003)
Mains voltage supply
Ceiling-mounted in Euro/standard
single back box; fitting accessories
for surface-mounting and flushmounting included
Momentary-action switch material: all
those that can be fitted with EnOcean
sender modules, models PTM100,
PTM200 nd PTM250
LM-RFR
42/104
22 154 466
Range extender
Easyklick UP-Repeater Signal amplifier
22 154 633
Switch unit
H5101-A210 Enocean 1-way momentary-action switch, white
H5101-A211 Enocean 1-way momentary-action switch, anthracite
H5101-A212 Enocean 1-way momentary-action switch, aluminium
H5101-A230 Enocean 2-way momentary-action switch, white
H5101-A231 Enocean 2-way momentary-action switch, anthracite
H5101-A232 Enocean 2-way momentary-action switch, anthracite
22 154 638
22 154 637
22 154 639
22 154 636
22 154 635
22 154 634
Trim
B3 aluminium - anthracite
B3 aluminium - white
22 154 641
22 154 640
Ø 99
42
42
Ø 104
24
58
Ø 79
90
■
Order no.
Sensor
18
Order no.
Sensor
ED-SENS Präsens + infrared sensor
22 154 506
Remote control
IRTOUCH Infrared remote control for ED-SENS sensor
Ø 99
42
22 154 450
42
Ø 104
90
24
Ø 79
58
Sensor (infrared, presence), surface-mount/recessed
■ Presence detector and integrated infrared interface
■ Housing: halogen-free white plastic
(RAL 9003)
■ Detection range at 2.5 m mounting
height: 8 m Ø
■ Power supply via DALI line (4 DALI
loads)
■ Ceiling-mounted in Euro/standard
single back box; fitting accessories
for surface-mounting and flushmounting included
■ Up to 3 IRTOUCH remote control units
with diffierent configuration
■ For use with LM-3DALIS and LITENET
netlink
■ No DALI addresses occupied
18
H/Ø
PIR sensor, surface-mount/recessed
■
■
■
■
■
Order no.
Sensor
PST 2 PIR sensor
22 162 319
PST cable, 10m
LPST10 preconfigured cable, 10m
22 154 126
Ø 99
42
42
Ø 104
24
Ø 79
90
■
High resolution and sensitivity, optimised for office applications
Detection range: 5mØ when installed
at a height of 2.5m; 6m Ø at height
of 3m; 7m Ø at height of 3.5m.
Housing: halogen-free white plastic
(RAL 9003)
Pre-assembled cable included for
connecting sensor to LM-TLX or LMRLX
Ceiling-mounted in Euro/standard
single back box; fitting accessories
for surface-mounting and flushmounting included
Optimum sensor position: hands of
user sitting at workstation should be
in centre of detection range
Connection to LUXMATE LM-TLX or
LM-RLX
58
■
18
DMX lighting management
Dynamic lighting scenarios, especially for external façades
Zumtobel is a one-stop supplier of complete solutions for large-area
lighting scenarios. Experienced technicians ensure intelligent implementation of the customers’ personal requirements, covering everything from
creative design and DMX hardware and software through to programming. DMX lighting management makes light unfold its artistic talents, by
allowing for lightning-fast control of a large number of lighting points and
automatic running of time sequences. Control is via momentary-action
switches or innovative glass control points.
Private and public buildings, where external façades are used to enhance an institution’s or a company’s image.
DMX

DMX
Order no.
Butler XT
■
■
■
■
■
■
■
■
Butler XT
24 175 962
RJ45 XLR 5pol Butler XT adapter cable
SUP24VDC/1,5A 24V power supply
24 159 615
22 161 814
177
59,5
■
Controls 2 DMX universes (2 x 512
DMX channels)
Internal clock and astronomical clock
For playing scenes, shows and short
videos
For integrating standard momentaryaction switches or glass touchpanel
control units
Programmed using „Lighting Application Suite“ PC software (by Zumtobel
Service)
Installation on rail in switch cabinet
Voltage supply: 24 V DC
Connections via RJ45 connector or
plug-in terminals
Adapter cable for connecting XLR
5-pin female connector (DMX standard ANSI E1.11) to Butler XT RJ45
24V/1.5A power supply
75,4
59,5
■
L/W
Glass touchpad T6 XT
■
■
■
■
■
Elegant control unit with touch-sensitive glass face
4 touch pads printed with „1“ to „4“
plus two symbols for intensity; customisable labels
Available in „white“ or „black“
Programmed using „Lighting Application Suite“ PC software (by Zumtobel
Service)
Only for connection to Butler XT
Power supplied via control line from
Butler XT
Glass Touch T6 XT B black
Glass Touch T6 XT W white
Order no.
80/80
80/80
24 175 967
24 175 968
80
L/W
■
■
■
■
■
■
Elegant control unit with touch-sensitive glass face
6 touch pads printed with „1“ to „6“;
customisable labels
Dimming ring with „Play“ button
Available in „white“ or „black“
Programmed using „Lighting Application Suite“ PC software (by Zumtobel
Service)
Only for connection to Butler XT
Power supplied via control line from
Butler XT
Glass Touch T6R XT B black
Glass Touch T6R XT W white
Order no.
80/160
80/160
24 175 965
24 175 966
80
160
Glass touchpad T6R XT
■
11
80
■
11
83
DMX
Order no.
DMX splitter
■
■
■
■
■
■
4-way splitter for DMX or VCU
230V AC supply
Termination resistance on input side
can be set by switches
Input: RJ 45 or 5-pin XLR, Output:
RJ45
Bench-top or wall-mounting unit
Includes IEC cable fitted with safety
plug
SPLITTER DMX VC
22 166 267
Order no.
DALI-DMX gateway
■
■
■
■
DALI-DMX GATEWAY
24 166 449
65
65
105
■
For integrating DMX luninaires in
DALI light control systems
Converts 16 DALI addresses into 16
DMX addresses
Adapted dimming curve (DALI control
value 86 = DMX value 1)
Equivalent to 1 DALI load
Installation on rail in switch cabinet
230V AC power supply
105
■
Circle
button combinations
Scene buttons
01: Office 1
VDT
When ordering, please specify
the code for the symbol combination required:
e.g. LM-CCB(V) 22 154 680,
version 03 (= conference room),
rocker control switches A/E
(= brightness I, blilnds).
03: Conference room
02: Office 2
VDT
Conferencing
Desk
Desk
Meeting
Presentation
Welcome
04: Presentation room
Overhead
05: Times of day
06: Opening hours
Day
Lecture
Open
Dusk
Break
Closed
Night
Video
07: Shop
Cleaning
08: Museum
Presentation
09: Standard
1
Exhibition
Sequence
Scene 1
2
Event
Rearrangement
Scene 2
3
Cleaning
10: Shop window
Scene 3
12: Hotel room
11: Gallery
Exhibition
Sequence
Brightness
Lecture
Day
Writing
Event
Night
13: Hotel bathroom
Watching TV
14: Hotel bed, left side
Brightness
15: Hotel bed, right side
Brightness
Brightness
Make-up
Reading
Reading
Watching TV
Watching TV
Relaxation
Rocker control switches
1
2
3
4
A: Brightness I
B: Brightness
group 1
C: Brightness
group 2
J: Brightness
group 3
K: Brightness
group 4
1
2
3
4
E: Blinds
L: Blinds
group 1
M: Blinds
group 2
N: Blinds
group 3
O: Blinds
group 4
I: Relaxation
Q: Reading
R: Writing
F: Make-up
D: Lighting
balancing
H: Brightness II
F: Window
G: Screen
P: Curtain
LIGHT
FOR
OFFICES
AND
COMMUNICATION
www.zumtobel.com/office
LIGHT
FOR ART
AND
CULTURE
www.zumtobel.com/culture
LIGHT
FOR
TRANSIT AREAS
AND
PARKING
www.zumtobel.com/parking
LIGHT
FOR
EDUCATION
AND
SCIENCE
www.zumtobel.com/education
LIGHT
FOR
HEALTH
AND
CARE
www.zumtobel.com/healthcare
LIGHTING
FOR
ORIENTATION
AND
SAFETY
www.zumtobel.com/safety
YEAR GUARANTEE
Top quality – with a fi ve-year guarantee.
As a globally leading luminaire manufacturer,
Zumtobel provides a five-year guarantee
for its complete product range with effect from
1 April 2010.
www.zumtobel.com/guarantee
LIGHT
FOR
PRESENTATION
AND
RETAIL
www.zumtobel.com/shop
LIGHT
FOR
INDUSTRY
AND
ENGINEERING
www.zumtobel.com/industry
LIGHT
FOR
HOTEL
AND
WELLNESS
www.zumtobel.com/hotel
LIGHT
FOR
SPORT
AND
LEISURE
www.zumtobel.com/sport
Zumtobel is the internationally leading supplier of integral
lighting solutions for professional interior and exterior
lighting applications.
TRACK AND SPOTS
■
■
■
■
MODUL AR LIGHTING SYSTEMS
■
■
■
■
■
DOWN-/UPLIGHTS
RECESSED LUMINAIRES
SURFACE-MOUNTED AND PENDANT LUMINAIRES
LED, TASK, WALL AND UPLIGHTS
CONTINUOUS ROW AND BAT TEN LUMINAIRES
■
Offices and Communication
Education and Science
Presentation and Retail
Hotel and Wellness
Art and Culture
Health and Care
Industry and Engineering
Sport and Leisure
Transit Areas and Parking
Orientation and Safety
We provide unique customer benefits by integrating technology, design, emotion and energy efficiency. Under the
Humanergy Balance concept, we combine the best possible ergonomic lighting quality for an individual’s wellbeing with the responsible use of energy resources.
The company’s own sales organisa tions in twenty countries, as well as commercial agencies in fifty other countries, form an international network of experts and design
partners providing professional lighting consulting, design
assistance and comprehensive services.
Lighting and sustainability In line with our corporate
philosopy “We want to use light to create worlds of experience, make work easier and improve communications and
safety while remaining fully aware of our responsibility to
the environment”, Zumtobel offers energy-efficient highquality products, while at the same time making sure that
our production processes based on the considerate use
of resources are environmentally compatible.
www.zumtobel.com/sustainability
HIGH-BAY LUMINAIRES
LUMINAIRES WITH E X TRA PROTECTION
LIGHTING MANAGEMENT
EMERGENCY LIGHTING
Art.-Nr. 04 797 479-UK 01/2011
© Zumtobel Lighting GmbH
Technical data was correct at time of
going to press. We reserve the right to
make technical changes without notice.
Please contact your local sales office for
further information.
For the sake of the environment:
Luxo Light is chlorine-free paper from
sustainably managed forests and
certified sources.
natureOffice.com
DE-101-933021
natureOffi
ce.com|| AT-000-000000
MEDICAL SUPPLY SYSTEMS
www.pefc.org
PEFC/06-38-214
United Kingdom
Zumtobel Lighting Ltd.
Unit 4 - The Argent Centre,
Pump Lane
Hayes/Middlesex UB3 3BL
T +44/(0)20 8589 1800
F +44/(0)20 8756 4800
M [email protected]
www.zumtobel.co.uk
USA and Canada
Zumtobel Lighting Inc.
Location Highland
3300 Route 9W
Highland, New York 1258-2630
T +1/(0)845/691 62 62
F +1/(0)845/691 62 89
www.zumtobel.us
www.zumtobel.ca
Australia and New Zealand
Zumtobel Lighting Pty Ltd
333 Pacific Highway
North Sydney, NSW 2060
T +61/(2)8913 5000
F +61/(2)8913 5001
M [email protected]
www.zumtobel.com.au
China
Zumtobel Lighting China
Beijing Office
T5-2-152 Tayuan
Diplomatic Compound
No. 1 Xin Dong Road,
Chaoyang District
100600 Beijing
T +86/(10) 8532 3886
F +86/(10) 8532 3889
M [email protected]
Hong Kong
Zumtobel Lighting Hong Kong
Unit 319, Level 43,
Tower 1, Metroplaza,
223 Hing Fong Road,
Kwai Chung, N.T.
T +852/(0)2503 0466
F +852/(0)2503 0177
M [email protected]
India
Zumtobel Lighting GmbH
Branch Office India
S-605, Manipal Centre
Dickenson Road
560042 Bangalore
M [email protected]
United Arab Emirates
Zumtobel Lighting GmbH (Branch)
Dubai Airport Free Zone,
Building 6W, B Block, 233
PO Box 54302
Dubai
T +971/(0)4 299 3530
F +971/(0)4 299 3531
M [email protected]
Hungary
Zumtobel Lighting Kft
Lomb u. 15.
1139 Budapest
T +36/(1) 35 00 828
F +36/(1) 35 00 829
M [email protected]
www.zumtobel.hu
Croatia, Serbia,
Bosnia and Herzegovina
Zumtobel Licht d.o.o.
Radnička cesta 80 – Zagrebtower
10000 Zagreb
T +385/(1) 64 04 080
F +385/(1) 64 04 090
M [email protected]
M [email protected]
www.zumtobel.hr
Czech Republic and
Slovak Republic
Zumtobel Lighting s.r.o.
Jankovcova 2
Praha 7
170 00 Praha
T +420/(2) 66 782 200
F +420/(2) 66 782 201
M [email protected]
www.zumtobel.cz
Poland
Zumtobel Licht GmbH Sp.z.o.o.
Przedstawicielstwo w Polsce
ul. Narbutta 46/48
02-541 Warszawa
T +48/(22) 856 7431
F +48/(22) 856 7432
www.zumtobel.pl
Slovenia
Zumtobel Licht d.o.o.
Dunajska cesta 159
1000 Ljubljana
T +386/(1) 56 09 820
F +386/(1) 56 09 866
M [email protected]
www.zumtobel.si
Russia
Zumtobel Lighting GmbH
Official Representative Office
Skakovaya Str. 17
Bld. No 1, Office 1104
125040 Moscow
T +7/(495) 945 36 33
F +7/(495) 945 16 94
www.zumtobel.ru
Norway
Zumtobel Belysning
Pilestredet 75 C
0354 Oslo
Postbox 5829 Majorstuen
0308 Oslo
T +47 22 46 85 00
F +47 22 46 85 02
M [email protected]
www.zumtobel.no
Sweden
Zumtobel Belysning
Birger Jarlsgatan 57
113 56 Stockholm
T +46 8 26 26 50
F +46 8 26 56 05
M [email protected]
www.zumtobel.se
Denmark
Light Makers AS
Indiavej 1
2100 København/Copenhagen
T +45 35 43 70 00
F +45 35 43 54 54
M [email protected]
www.lightmakers.dk
Headquarters
Zumtobel Lighting GmbH
Schweizer Strasse 30
Postfach 72
6851 Dornbirn, AUSTRIA
T +43/(0)5572/390-0
F +43/(0)5572/22 826
Zumtobel Licht GmbH
Grevenmarschstrasse 74-78
32657 Lemgo, GERMANY
T +49/(0)5261 212-0
F +49/(0)5261 212-7777
www.zumtobel.de
www.zumtobel.com
LUXMATE
Lighting
management
In the beginning was
dark space. Then
light, energy and life.
LUXMATE controls
the potential of light,
creating new worlds of
experience. For people, their visions, their
well-being. With maximum energy efficiency.
www.zumtobel.com/lightingmanagement
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement