- No category
advertisement
NTSC
Time-Lapse Videocassette Recorder
SVT-RA168/RA40
Quality Recording and Playback for Those Critical Moments
Sony’s new SVT-RA168/RA40 time-lapse videocassette recorders deliver clear playback images and capture more information than conventional time lapse VCRs. With a host of new user-friendly and convenient features, the SVT-RA168/RA40 recorders will enhance the efficiency and ease of use of your CCTV system.
RealAction
The SVT-RA168/RA40 achieves high-quality time-lapse recording thanks to the incorporation of Sony’s RealAction technology. Sony’s RealAction technology allows the SVT-RA168/RA40 to record 20 fields per second in 24-hour recording mode – that’s four times as much information compared to conventional time-lapse VCRs (5 fields per second).
The SVT-RA168/RA40 with its improved recording density provides smooth, natural recording even of fast moving objects.
RealAction recording 20 fields/second
Normal time-lapse recording 5 fields/second
APC
(Adaptive Picture Control)
For maximum-quality recording at all times, the SVT-RA168/RA40 recorders feature
APC (Adaptive Picture Control) – the function that automatically detects the condition of the recording head and the videocassette tape and then sets the optimum recording-head current.
APC enables the SVT-RA168/RA40 to record clear images even after long periods of use.
Maximum Recording Times
SVT-RA168
48
72
96
120
168
Recording speed
T-120
6
18
30
T-160
18
24
40
64
96
128
160
224
Maximum recording time
EP mode
T-120
6
18
30
T-160
8
24
40
Time-lapse mode
54
78
102
126
174
72
104
136
168
232
SVT-RA40
Recording speed
T-120
6
18
30
T-160
18
24
40
Maximum recording time
EP mode
Time-lapse mode
T-120
6
18
30
T-160
8
24
40
Interval
1/60
1/20
1/12
0.15
0.22
0.28
0.35
0.48
Audio recording
Possible
Impossible
Interval Audio recording
1/60
1/20
1/12
Possible
Choice of Recording Modes
Auto Repeat
This feature allows the SVT-RA168/RA40 to automatically rewind the tape when it reaches its end and then re-start recording. This enables virtually continuous, unattended operation using a single tape. Auto
Repeat is automatically disabled in Alarm Recording mode to safeguard against recording over an alarm event.
Timer Recording
A built-in timer allows the user to set the exact recording time and recording mode in advance. Timer Recording can be preset to either weekly or daily, with holiday and daylight settings also available. You can also operate Timer Recording externally via the EXT
TIMER IN terminal. If an alarm occurs, the SVT-RA168/RA40 will initiate recording as required even if it is in Standby mode.
Alarm Recording
When an alarm signal is received via the ALARM IN terminal, the recorder will automatically switch to Alarm Recording mode regardless if it is in Stop or Power-off mode. The Alarm Recording speed and duration can be set in advance. The SVT-RA168/RA40 recorder can quickly locate and review recorded alarm segments by using one of its user friendly functions such as Alarm Scan, Alarm Recall or Alarm
Search. An alarm log of up to 100 entries can be recorded* at the beginning of the tape so that, even if the tape is ejected, the data is retained on the tape and can be reviewed when needed.
* This function can be disabled.
Series Recording
Several recorders can be cascaded to extend the total recording time.
By utilizing the Series Recording function, recording can continue without interruption – as soon as one unit finishes recording, the next unit is automatically activated.
Reliable Safety Features
Quick-Recording Check
If the REC CHECK button is pressed when recording in time-lapse mode, the tape rewinds for approximately three seconds and then plays back for another four seconds. Upon completion of playback, the recorder then returns to its original recording mode.
Power-Failure Protection
In the event of power failure, the SVT-RA168/RA40 recorder’s built-in lithium battery supplies back-up power to retain the current time and setting modes in memory for up to 30 days.
Warning Signal Output
If a recording is inadvertently stopped, the WARNING OUT terminal automatically generates a pulse signal.
Tape-Use Frequency Check*
This feature checks and records the amount of tape used at the beginning of the tape.
* This function can be disabled.
Video Loss Alert
A “VIDEO LOSS” message is displayed on the monitor whenever video input signals are lost during recording.
Rec Out
During recording or when the recording is posed, the recorder outputs a pulse to allow users to know that the recorder is in recording mode.
Automatic Head Cleaning
Thread Check
Clog Detection
Tape End Out
Security Lock Function
User-Friendly Operation
• Rapid Fast-Forward and Rewind - 100 seconds for an entire T-160 tape
• Sharpness control for crisp picture reproduction
• Quick-start mechanism for smooth operation
• Excellent Time/Date Search Accuracy - 10-minute increments
• Alarm-List Recording – Record up to 100 alarms of data showing time and date of occurrence
• Real-time Display indicates real operating times in recording or stop modes
• On-screen display available in English, French and Spanish
• Built-in time and date generator
• Remote control function with optional remote control unit
• Used time indicator
• Power saving mode
• Loop-through capability
• Camera switcher interface
• RS-232C/RS-485 interface with the optional SVT-RS100 interface board
• Alarm reset
Specifications
SVT-RA168 SVT-RA40
General
Mass
Dimensions
(W x H x D)
Power requirements
Power consumption
Operating temperature
Operating humidity
Fast-forward/rewind time
Video Input/Output
Input
Output
S/N ratio
4.1 kg (9 lb)
420 x 100 x 300 mm
(16 5/8 x 4 x 11 7/8 inches)
120 V, 60 Hz
16 W
5°C to 40°C (41°F to 104°F)
80% or less
Approx. 100 seconds
(when using T-160 tape)
System
Video signal
Recording/playback system
Tape speed
Recording/ playback time
Horizontal resolution
T-120
EIA standard (monochrome)
NTSC (color)
Rotary four-head helical scanning system
11. 12 mm/s (6- or 8-hour mode)
6, 18, 30, 48, 72,
96, 120, 168 hours
6, 18, 30 hours
8, 24, 40 hours T-160 8, 24, 40, 64, 96,
128, 160, 224 hours
Monochrome 350 TV lines or more
Color 300 TV lines or more
BNC (1), 1 Vp-p, 75
BNC (1), 1 Vp-p, 75
44 dB
Ω
Ω
, unbalanced
, unbalanced
Audio Input/Output
Audio recording system
Input
Output
Microphone input
Distortion
Audio S/N ratio
Others
Alarm input
Alarm output
Warning output
Low-level, terminal trip (1)
+5 V, 5.7 k
Ω
(low active), terminal trip (1)
Switch output +5 V, 5.7 k
Ω
(low active), terminal trip (1)
Tape-end output/Series output +5 V, 5.7 k
Ω
(low active), terminal trip (1)
+5 V, 5.7 k
Ω
(low active), terminal trip (1)
External timer input
Recording output
Alarm-reset input
Low-level, terminal trip (1)
+5 V, 5.7 k
Ω
(low active), terminal trip (1)
Low-level, terminal trip (1)
Series input
Remote-control input
Low-level, terminal trip (1)
ø 3.5 mm minijack (1)
Supplied accessories
Monaural
Phono (1), -8 dBs, 27 k
Ω
, unbalanced
Phono (1), -8 dBs, 600
Ω
, unbalanced
ø 3.5 mm minijack (1), -60 dBs, 600
Ω
Less than 4 %
43 dB
Operation manual (1), AC power cord (1)
Optional accessories
SVT-RM10
SVT-RS100
Remote control unit
Interface board
Front Panel
SVT-RM10
(Remote control unit)
SVT-RS100
(Interface board)
Distributed by
ALARM
IN RESET
SERIES
IN
EXT
TIMER IN COM
WARNING
OUT
ALARM
OUT
TAPE END
SERIES OUT
REC
OUT
SW
OUT
REMOTE MIC IN
IN
AUDIO
OUT IN
VIDEO
OUT
Rear Panel
MK7813V1OHB02MAR
©2002 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony is a registered trademark of Sony Corporation.
Printed in Japan on recycled paper
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement