Cortelco | Patriot II 2194 | Instruction manual | Cortelco Patriot II 2194 Instruction manual

Cortelco Patriot II 2194 Instruction manual
Owner’s
Instruction Manual
2194**V0E27S
PATRIOT II
MEMORY TELEPHONE
PATRIOT II
MEMORY TELEPHONE
*Desk/Wall Mountable * Tone/Pulse
Switchable Dialing * FLASH * HOLD *
Message Waiting Light * Last Number
Redial * Handset Volume Control * PAUSE
* Ringer Volume Control * Data Port * 10
One-Touch Memory Locations * HearingAid Compatible
Congratulations on purchasing the
PATRIOT II MEMOR
Y TELEPHONE
MEMORY
telephone. All products in the P
ATRIOT
PA
family of telephones combine the latest
technology to provide sophisticated solutions
to your complex communication needs.
Your new telephone was made by
people who take a great deal of PRIDE in
producing quality products to assure you
years of trouble-free service.
We want you to know all about your new
telephone
telephone, how to install it, the features it
provides, and the services you can expect
from its use. We have included this
information in your Owner’s Instruction
Manual.
PLEASE READ BEFORE INST
ALLING
INSTALLING
AND USING YOUR NEW TELEPHONE.
2
Important Safety Instructions
Always follow basic safety precautions when using your
telephone equipment to reduce the risk of fire, electrical shock,
and injury.
1. Read and understand all instructions in the Owner’s
Instruction Manual.
2. Read all warnings and follow all instructions marked on the
product.
3. Unplug this product from the wall outlet before cleaning.
Use a damp cloth for cleaning. Do not use liquid or aerosol
cleaners.
4. Do not use the telephone near water. For example, do
not use near a bathtub, wash bowl, kitchen sink, laundry tub,
swimming pool, or in a wet basement.
5. Do not place this product on an unstable cart or stand.
The product may fall causing serious damage to the product.
6. Do not place any objects on the telephone line cord. Do
not locate the telephone where the line cord will be walked on.
7. Do not block or cover ventilation slots and openings in
the bottom of the telephone. The openings should never be
blocked by placing the telephone on a bed, sofa, rug, or other
similar surfaces. This telephone should never be placed near
or over a radiator or heat register. This telephone should never
be placed in a built-in installation unless proper ventilation is
provided.
8. Never spill liquid on the telephone or push objects of
any kind through ventilation slots. Liquid or objects may
touch dangerous voltage points or short out parts that could
result in a risk of fire or electrical shock.
9. Do not disassemble this product. Opening or removing
covers may expose you to dangerous voltages or other riskes.
Incorrect reassemble can cause electrical shock when the
product is subsequently used.
10. Avoid using a telephone during a local thunderstorm.
There may be a remote risk of electrical shock from lightning.
3
11.Do not use a telephone in the vicinity
of a gas leak to report the leak, or otherwise.
12.Unplug the telephone from the wall
outlet and refer servicing to qualified service person
nel under the following conditions:
•When the line cord is frayed or plugs damaged.
•If liquid has been spilled into the telephone.
•If the telephone has been exposed to rain or water.
•If the telephone does not operate properly by followi
ng the operating instructions.
•If the telephone has been dropped or the housing
damaged.
•If the telephone exhibits distinct change in
performance.
SAVE THESE INSTRUCTIONS
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning:
Changes
expressly
approved
or
modifications
by
the
to
party
unit
not
responsible
this
for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a CLASS B digital device,pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If
this equipment does cause harmful interference to radio or
television reception, which can
be
determined
by
turning
the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase
the
separation
between
the
equipment
the
equipment
into
outlet
and
receiver.
-
Connect
an
on
a
circuit
different from that to which the receiver is connected.
-
Consult
the
dealer
or
an
technician for help.
4
experienced
radio
TV
BEFORE USING YOUR TELEPHONE
1. Set the ringer volume control. If the control is set
to OFF, you will not hear the ringer when someone
calls you.
2. Your telephone has a TONE-PULSE switch. Set
the switch to match the dialing service from the tele
phone company.
• If you have pulse service, set the Tone-Pulse
switch to PULSE.
• If you set the switch for TONE service, you must
have TONE service or you cannot dial.
• If you set the switch for PULSE service and you
haveTONE service, you can dial numbers, but you
cannot use distant services, such as bank-byphone, unless you press the TONE button.
USING YOUR TELEPHONE
TO PUT A CALL ON LOCAL HOLD
While on a call, press the HOLD button, the LED lights and the call
is on local hold. Place the handset on hook, the HOLD indicator
remains on while the call is on local hold.
To return to the call on hold:
Lift the handset or if the handset is off-hook, press the HOLD
button, the LED will go off and the call is no longer on hold.
TO STORE NUMBERS:
Lift the handset, you will receive dial tone. Press the STORE button
and dial the number (15 digits maximum). If desired press the
PAUSE button to insert a two-second pause in the number sequence.
Then press the STORE button again and press desired memory
location button and place the handset on-hook, or press the STORE
button to continue storing numbers. Use the shift button to store in
two-touch memory locations.
TO DIAL STORED NUMBER:
To dial the stored numbers in the 10 one-touch memory locations:
1. Lift the handset.
2. Press memory location button
MAINTENANCE INFORMATION
Treat your telephone with care for trouble-free
performance. Avoid dropping the handset. Carefully place
the handset on-hook after use.
Clean your telephone with a damp cloth. Stains
may be removed with a mild soap. Do not use liquid or
aerosol detergents or cleaning agents.
5
FEATURES OF YOUR TELEPHONE
HEARING-AID COMPATIBLE HANDSET The handset on
your Patriot II telephone works with magnetically-coupled
hearing aids.
PUSHBUTTON DIAL. The pushbutton dial is used to dial
numbers using either pulse or tone dialing
TELEPHONE LINE CORD JACK Connect the modular line
cord supplied with your telephone at this jack. Use long cord
for desk installation, short cord for wall installation.
DATA PORT Data Port is a connection which is in parallel
with the telephone line. This allows the connection of a
device such as a modem, or an answering machine.
MESSAGE WAITING INDICATOR The Message Waiting
Indicator will light when a message is waiting. This switch
allows the phone to be configured for 90V-message waiting
either on T/R (tip/ring, the red/green wires) or Y/B (the
yellow/black wires).
If this switch is in the T/R Position then the lamp also serves
as visual ring indication.
MEMORY LOCATIONS One-Touch locations are used to
store and retrieve numbers for automatic dialing. Each
location can store 15 digits, including numbers and pauses.
6
FEATURES OF YOUR TELEPHONE
TONE/PULSE SWITCH The TONE/PULSE switch, located on the
side of your telephone, is used to set the type of dialing for your
telephone to match the local service from your telephone company.
The ‘P’ position is for Pulse dialing service. The ‘T’ position is for
Tone dialing.
RINGER VOLUME CONTROL The 3-position switch (located on the
side of the telephone) is used to set ringer volume.
HANDSET VOLUME CONTROL The 3-position switch (located on
the side of the telephone) is used to set the handset volume.
STORE BUTTON The STORE Button is used to store numbers in
memory locations for automatic dialing. You can store a maximum of
10 one-touch numbers with 15 digits maximum. To store a number
lift the andset, press the STORE button and dial numbers (15 digits
maximum), press the STORE button again and press the desired
memory location button. Place the handset on-hook, or press the
STORE button to continue storing numbers.
REDIAL BUTTON Your Patriot II telephone stores in memory the last
nubmer dialed (31 digits maixmum). You can redial the last nubmer
dialed by lifting the handset and pressing the RD/P button. This
button must be the first button pressed after lifting the handset to
activate the redial feature. You can erase the number stored in redial
memory by lifting the handset and dialing any digit.
PAUSE BUTTON The PAUSE button can be used to program pauses
in your memory locations.
FLASH BUTTON The FLASH button sends an interrrupt signal to the
distant office. The interrupt is a 600-millisecond, timed line
disconnect which tells the distant office that you wish to use an
available feature. The results of a FLASH signal will depend on the
services you have available. DIP switch selection located on the
bottom of the phone allows for flash setting of 300 msec. or 600
msec.
HOLD BUTTON To place a call on local hold, press this button and
return the handset to tht ecreadle (the hold LED will light). To
retrieve the call lift the handset or, if the handset if off-hook, press the
hold button.
DIP SWITCH The DIP switch located on the bottom of the phone
priveds for:
a) Flash timing selection of 300 or 600 msec
b) Positive line disconnect option selection.
c) Pause time selection for 2 or 3.6 seconds.
d) A-Lead feature.
7
TELEPHONE SERVICE PROBLEMS
If you have any problems with your telephone service, determine if the problem is with your telephone or the telephone company lines. BEFORE CALLING THE TELEPHONE COMPANY, be
aware that they may charge you for a service call if the problem is
caused by your telephone.
NO DIAL TONE
Unplug your telephone from the wall jack. Plug a substitute
telephone that is known to work properly into the same wall jack.
•If the problem persists when using the substitute telephone,
notify the telephone company.
•If the substitute telephone works properly, you must have your
telephone repaired before reconnecting it to the wall jack.
DIAL TONE BUT NO RINGING
•Check that the RINGER VOLUME CONTROL is not set to OFF.
•Set the RINGER VOLUME CONTROL to HIGH and have
someone on another line call you. Before answering the call set
the RINGER VOLUME CONTROL to the desired volume.
DIAL TONE BUT NO DIALING
•Set the TONE/PULSE switch. You cannot dial out in TONE
position if you have Rotary Dial Service.
•For Rotary Dial Service, set the switch to PULSE position.
•For Tone Dial Service, set the switch to TONE position.
•Try both positions if you are not sure.
REPAIR OF YOUR TELEPHONE
DO NOT ATTEMPT TO REPAIR THE TELEPHONE YOURSELF.
Telephones manufactured by Cortelco must be returned to us for repair.
You can return your telephone to Cortelco for repair or replacement in accordance with our LIMITED WARRANTY.
DATE-OF-PURCHASE Cortelco warrants telephones against defects in material and workmanship in accordance with our LIMITED WARRANTY. If your telephone is returned for repair, include a copy of your sales
receipt containing the date-of-purchase. DO NOT INCLUDE THE ORIGINAL
SALES RECEIPT.
If date-of-purchase is not included, the factory date printed on the
label on the bottom of your telephone will be used as the date-of-purchase.
The factory date allows six months for distribution and sale of the telephone.
If you return your telephone for repair, the warranty period is not
extended. The original date-of-purchase continues to apply to your warranty.
OUT-OF-WARRANTY REPAIR We will repair this telephone for a
nominal fee after the LIMITED WARRANTY has expired if you send it to us in
a complete and undamaged condition. The repaired telephone will be shipped
to you C.O.D., freight collect.
FOREIGN ATTACHMENTS Remove all attached devices, such as
adapter plugs or long cords, from your telephone before returning for repair.
We do not assume responsibility for repair or return of attachments. Check
our LIMITED WARRANTY.
RETURN-FOR-REPAIR PACKAGING If you are returning a telephone to us for repair, package it carefully, preferably in the original carton.
Be sure to include your return address, a copy of the sales receipt showing
date-of-purchase, and a note describing the problem you have with your telephone. Shipping must be prepaid. If the telephone is in warranty, it will be
repaired or replaced, at our option, at no cost to you, and it will be returned
shipping prepaid.
Ship telephones (shipping prepaid) to:
Cortelco - REPAIR CENTER
1703 SAWYER ROAD
CORINTH, MS 38834
8
INSTALLING YOUR TELEPHONE
UNPACKING YOUR TELEPHONE
Check the contents of the carton. Make sure you have a
telephone, a baseplate, a 8-foot handset cord, a long modular line
cord, and a short modular line cord.
If anything is missing or damaged, contact the place of
purchase.
MODULAR JACKS
To install your telephone, you must have a modular wall
jack at the desired location, or a 4-prong jack that can be modified
with a 4-prong adapter. If your telephone line does not have a
modular wall jack, or a jack that can be modified, you must have one
installed.
DANGER: To reduce the risk of electrical shock and
personal injury, observe the followingwhen installing
station wiring:
1.Never install telephone wiring during a lightning storm.
2.Never install telephone jacks in wet locations
unless the jack is specifically designed for wet
locations.
3.Never touch uninsulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
4.Use caution when installing or modifying
telephone lines.
Various types of
modular wall jacks are
shown to the right. The
USOC RJ11C modular wall
jack is for desk telephones and
the USOC RJ11W modular wall
jack is for modular wall
telephones.
Various types of 4prong wall jacks are shown to
the right along with a 4-prong
adapter. The 4-prong adapter
plugs into the wall jack for
modular wall jack service.
9
INSTALLING YOUR TELEPHONE
DESK INSTALLATION
To install as a desk telephone, refer to the diagram.
• Insert the baseplate mounting
posts into the mounting holes and
locking slot on the housing.
• Connect the line cord into the
jack on the back of the phone.
• Plug the line cord into the
jack and route the free end down
through the channel to the baseplate.
• Plug the unattached end of the
line cord into the modular wall jack.
WALL INSTALLATION
To install a wall telephone, refer to the diagram.
• Insert the baseplate
mounting posts and latch into the
mounting holes and locking slot.
• Plug the line cord into
the wallplate.
• Slip the eyelets of the
baseplate down onto the wallplate
posts in a downward direction.
• Adjust the wall mount
clip, located on the face of the
housing, by lifting up the clip and
rotating it 180 degrees.
Complete the Desk/Wall mounting by installing the handset
and handset cord.
CHECK FOR DIAL TONE
Lift the handset and listen for dial tone.
1) When you hear dial tone, your telephone is ready to use.
2) If you do not hear dial tone, refer to the Telephone Service
Problems part of your manual.
10
THE FCC WANTS YOU TO
KNOW
DESIGN COMPLIANCE Your telephone is designed to
comply with FCC Rules and Regulations, Part 68. It can be connected to the telephone network as FCC-registered terminal equipment. The registration number is printed on the label on the bottom
of your telephone.
NOTIFICATION TO THE TELEPHONE COMPANY
As a customer of the local telephone company, you must, if they ask,
tell them before connecting your telephone to the telephone company lines. The telephone company may need the FCC registration
number and the ringer equivalence of the telephone. This information is printed on a label on the bottom of your telephone.
RINGER EQUIVALENCE The ringer equivalence indicates the amount of power that your telephone draws from the telephone company line during ringing. The number is printed on the
label on the bottom of your telephone.
If you have more than one telephone (or other terminal device) connected to the telephone company line, you should total the
ringer equivalence numbers (REN’s), and be sure that the total is not
more than five. Your telephones may not ring if the total is more than
five. Also, in some rural locations, your telephone may not ring if the
REN total is more than three.
RESTRICTIONS You must not connect your telephone to
coin-operated lines or party lines.
INTERFERENCE POTENTIAL Your telephone has a
pushbutton dial that generates radio frequency energy. If not properly used, it may interfere with radio and television reception. If the
telephone does cause interference with reception, move the radio or
television to another electrical circuit or another location. If necessary, you may need to seek advice from an experienced technician.
INSTALLATION This model telephone must be connected
to the telephone company lines through a modular jack. The required
USOC for the modular jack is RJ11C for desk mounting and RJ11W
for wall mounting. The USOC number is printed on the label on the
bottom of your telephone.
TYPE OF DIALING Your telephone has a TONE/PULSE
switch that allows Tone or Pulse dialing. To use TONE dialing, you
must have TONE service from your telephone company to use your
telephone for dialing. Note that you will usually be charged extra for
TONE service.
HEARING-AID COMPATIBILITY The handset on your
telephone will work with magnetically-coupled hearing aids. You can
use a hearing aid equipped with a T (Telephone) switch.
IN CASE OF TROUBLE If your telephone should cause
problems on the telephone line, the telephone company can temporarily disconnect your service. The telephone company must then
notify and allow you to correct the problem.
The telephone company may from time to time change its
lines or equipment. They must notify you if planned changes will
affect your telephone service, to allow you to take steps to prevent
interruptions.
11
LIMITED WARRANTY
If you purchased this product new in the U.S. or Puerto
Rico, CORTELCO warrants it against defects in material
and workmanship for a period of one (1) year from the
date of original purchase. This warranty is in lieu of all
other express warranties. During the warranty period,
CORTELCO agrees to repair or, at its option, replace the
defective product, or any part of it without charge for parts
or labor. This is your exclusive remedy. This warranty does
not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care,
the affixing of any attachment not provided by CORTELCO
with the product and loss of parts. The warranty is voided
in the event any unauthorized person alters or repairs the
unit.
Telephone companies use different types of equipment and
offer various types of services to customers. CORTELCO
does not warrant that this product is compatible with
the type of equipment of any particular phone company or the services provided by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY,
INCLUDING THE WARRANTY OF MERCHANTABILITY
AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AS OF THE DATE ONE YEAR FROM
THE ORIGINAL PURCHASE OF THE PRODUCT.
CORTELCO ASSUMES NO RESPONSIBILITY FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE EXCLUSION AND LIMITATION
MAY NOT APPLY TO YOU.
If failure occurs and your telephone is in warranty, service
shall be provided by returning it to CORTELCO - Repair
Center, 1703 Sawyer Road, Corinth, Mississippi 38834,
shipping prepaid. The product will be repaired or replaced
if examination by us determines the product to be defective. Telephones received damaged as a result of shipping will require you to file a claim with the carrier.
PATRIOT II MEMORY Rev0805
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising