User manual | International Pocket Guide

HIGH PERFORMANCE
NETWORK INFRASTRUCTURE
PR ODUCT POCK ET GUIDE
A
Ortronics, a group brand Legrand, is a global leader in
high performance network infrastructure solutions,
offering a complete range of Category 5e, 6 and 6A
copper and fibre optic connectivity solutions, as well
as Layer Zero® physical support solutions.
Ortronics is headquartered in New London,
Connecticut, USA, and is a group brand of Legrand,
the global leader in products and systems for wire
and cable management worldwide.
INDEX
OR T RON I C S
WAR R A N TY P R OGR A M
We offer four different warranty assurances to
support our products and solutions.
BASIC PRODUCT WARRANTY
Product repair or replacement for up to five (5) years
from time of purchase, excluding labour costs.
EXT EN D ED
PRO D U C T WA R R A N TY
Product repair or replacement for up to fifteen (15)
years from time of purchase including labour costs.*
Only available for projects registered by an Ortronics
Certified Installer (CI), Certified Installer Plus (CIP)
or Certified Installer Plus-ESP (CIP-ESP).
T ECHC H OI C E WA R R A N T Y
IN D E X
5
TIA Standards Relationships
6 – 7
9 – 11
EMEA and US Standards Overview
12 – 15
Copper Patch Panels
16 – 20
Copper Patch Cords
21 – 23
Copper Cable
24 – 25Faceplates
Copper Jacks
26Workstation
27
30 – 31
Fibre Modules
32 – 33
Fibre Cords
34 – 37
Fibre Cable
38
Fibre Pigtails
Fibre Accessories
Fibre Cabinets / Panels
Product repair or replacement for up to fifteen (15)
years from time of purchase including labour costs.*
Assurance that guarantees applications designed to
run over the specified cabling category will do so
providing channel performance to meet current
relevant standards. Only available to CIP or
CIP-ESP contractors.
39
40 – 41
Mighty Mo GX
42 – 43
Mighty Mo 6
44 – 45
Mighty Mo 10
46 – 47
Mighty Mo Accessories
CL ARI TY WA R R A N TY
48 – 49
Mighty Mo Fiber Raceway
50 – 51
Mighty Mo Air Control Solutions
52
Product repair or replacement for up to twenty-five
(25) years from time of purchase including labour
costs.* Assurance that guarantees applications
designed to run over the specified cabling category
will do so and provide channel performance that
exceeds current relevant standards. Only available to
CIP or CIP-ESP contractors.
*At an agreed rate.
General Accessories
T I A S TA N D A R D S R E L AT I O N S H I P S
T IA S TA N D A R D S R E L AT I ONSHI PS
COMMON
S TA N D A R D S
ANSI/TIA-568-C.0
ANSI/TIA-568-C.1
Generic
Telecommunications
Cabling for
Customer Premise
Commercial Building
Telecommunications
Cabling Standards
COMPONENT
S TA N D A R D S
TIA-569-C
ANSI/TIA-570-C
ANSI/TIA-568-C.2
Commercial Building
Standard for
Telecommunications
Pathways and Spaces
Residential
Telecommunications
Infrastructure Standard
Balanced Twisted-Pair
Telecommunications
Cabling and
Component Standard
ANSI/TIA-606-B
ANSI/TIA-942-A
ANSI/TIA-568-C.3
Administration Standard
for Commercial
Telecommunications
Infrastructure
Telecommunications
Infrastructure Standard
for Data Centres
Optical Fibre Cabling
Component Standard
ANSI-J-STD-607-B
ANSI/TIA-1005-A
Commercial Building
Bonding and Grounding
(Earthing)
Requirements for
Telecommunications
Telecommunications
Infrastructure
Standards for
Industrial Premises
ANSI/TIA-758-B
Customer-Owned
Outside Plant
Telecommunications
Infrastructure Standard
ANSI/TIA-862-A
Building Automation
Systems Cabling
Standards for
Commercial Buildings
5
PREMISE
S TA N D A R D S
ANSI/TIA-1179
Healthcare Facility
Telecommunications
Infrastructure Standard
ANSI/TIA-568-C.4
Coax Cabling
Component Standard
I S O S TA N D A R D S O V E R V I E W
I SO /IEC 11801
BUI LDI NG
DE SI GN PHASE
The International Organization for Standardization
(ISO) and the International Electrotechnical Commission
(IEC) jointly oversee international standardization
of telecommunications cabling.
GENERIC CABLING SPE CI FI CATI ON
DE SI GN PHASE
PHASE
EN 50173 series
except EN 50173-4
EN 50174-1
EN 5 0 1 7 4 - 1
6: Bonding
networks
4: Structure
except EN 50173-4
4: Requirements
for specifying
installations
of information
technology cabling
4: Requirements
for specifying
installations
of information
technology cabling
7: Cable
requirements
8: Connecting
hardware
requirements
Other major organizations in Europe for building,
construction, and telecommunications codes
and standards include: AFNOR (Association Francaise
de Normalisation), BSI (British Standards Institution),
CEI (Italian Electrotechnical Committee),
CENELEC (European Committee for
Electrotechnical Standardization), and ETSI
(European Telecommunications Standards Institute).
5: Requirements
for installers
of information
technology cabling
9: Requirements
for cords
and jumpers
A: Link
performance limits
PLANNING PHASE
and EN 50173-4
EN 50174-2
EN 50174-2
4 and 5: Structure
4: Requirements
for installations
of information
technology cabling
5: Requirements
for installations
of information
technology cabling
6: Segregation of
metallic information
technology
cabling and power
supply cabling
6: Segregation of
metallic information
technology cabling
and power supply
cabling
7: Electricity
distribution
systems and
lighting protection
8: Office
(commercial)
premises
6: Channel
performance
Contextual relationship between EN 50173
series and other standards relevant for information
technology cabling systems.
8: Cable
requirements
9: Connecting
hardware
requirements
10: Requirements
for cords
and jumpers
9: Industrial
premises
10: Homes
11: Data centres
and EN 50174-3
and EN 5017 4 - 3
and (for equipotential
bonding) EN 50310
and (for equipotential
bonding) EN 50310
and EN 5034 6
4: General
requirements
5: Test parameters
for balanced cabling
6: Test parameters
for optical fibre
cabling
I S O S TA N D A R D S O V E R V I E W
7
O P ER AT I O N
P HA SE
EN 50310
5: Channel
performance
These organizations form a specialized system
for worldwide standardization.
I NSTALLATI ON
PHASE
COPPER JACKS
C AT 6 A S H IE L D ED
KEYSTONE
Rugged cast-encased Keystone jack design
is durable and easy to use. Quick tool-less
termination process reduces installation time.
Rear load design supports quick and easy
option for shielded termination.
PA R T N U M B E R DESCRIPTION
TKS6A
Category 6A shielded self-terminating keystone jack
*See page 13 for unloaded Cat 6A shielded panels.
C L A R IT Y C AT 6 A / 6
S H IE L D E D
®
Clarity shielded TracJacks and panel jacks meet
TIA Category component specifications and are
precisely tuned to the terminated plug values of
Clarity patch cords for optimum performance that
is field measurable in the channel.
®
PA R T N U M B E R DESCRIPTION
TJS6A
Clarity 6A, Category 6A shielded
jack, 8-position
TJS600
Clarity 6, Category 6 shielded jack,
8-position,
9
PJS6A
Clarity 6A, Category 6A shielded
Panel jack, 8 positions
PJS6
Clarity 6, Category 6 shielded
Panel jack, 8 positions
COPPER JACKS
CLARITY CAT 6A / 6 UTP
CLARITY HIGH
DENSITY JACKS
®
®
Clarity TracJacks feature the improved performance
of centre tuned Cat 6A and Cat 6 connector technology.
®
Ortronics high density jacks incorporate patentpending mechanical and electrical advancements,
providing greater headroom, as well as a new
installation mechanism. In addition, the easy to
lace-and-crimp termination maintains cable
performance, reduces time to install and offers a
simple hand tool that contributes additional time
savings. These jacks are rear loading, utilizing
an innovative locking latch for quick and
reliable mounting.
Enhanced IDC designs make it easier to
terminate while reducing the size of the jack.
PA R T N U M B E R TJ6A
TJ600
DESCRIPTION
Clarity 6A/10G, Category 6A, 180° exit, fog white
Clarity 6, Category 6, 180° exit, fog white
Clarity jacks are available in the following colours:
-00=black, -36=blue, -42=red, -43=orange, -44=yellow,
-45=green, -68=Wiremold® gray, -88=white,
-99=Wiremold ivory. Add tailcode to end of part number.
TECHCHOICE CAT 6 / 5E UTP
®
TechChoice keystone jacks and modules
feature an easy-to-follow universal wiring
label and support standard termination using
a 110-impact tool. The keystone footprint
allows for flexibility in installation scheduling
because of its rear insertion into the faceplate.
PA R T N U M B E R KS6
KS5E
PA R T N U M B E R HDJ6A
Clarity HDJ Category 6A jack, 8 position, T568A/B,
fog white
HDJ6
Clarity HDJ Category 6 jack, 8 position, T568A/B,
fog white
HDJ5E
Clarity HDJ Category 5e jack, 8 position, T568A/B,
fog white
Clarity HDJ jacks are available in the following colours:
-00 black, -36 blue, -42 red, -43 orange, -44 yellow,
-45 green, -88 white. Add tailcode to end of part number.
*See page 15 for high density jack panels.
DESCRIPTION
Category 6, T568 A/B, fog white, pack of 25
HIGH DENSITY
JACK ACCESSORIES
Category 5e, T568 A/B, fog white, pack of 25
TechChoice jacks are available in the following colours:
-00=black, -13= Electrical ivory, -36=blue, -42=red,
-43=orange, -44=yellow, -45=green, -78= gray,
-88=white, -99=Wiremold ivory. Add tailcode to end of
part number. For individual jacks, add "A" to part number
before colour tailcode.
COPPER JACKS
DESCRIPTION
PA R T N U M B E R 11
HDJHCT
DESCRIPTION
HDJ handled crimping tool
HDJTJA20
HD TracJack mounting adapter bezel,
pack of 20, fog white
HDJB20
HD jack blank, pack of 20, fog white
HDJB20-00
HD jack blank, pack of 20, black
C O P P E R PAT C H PA N E L S
CLARITY C AT 6A / 6 U TP
®
C AT 6 A S H IE L D ED
KEYSTONE
Clarity patch panels combine the Ortronics
commitment to ease and reliability with the ETL
verified TIA-568C.2 performance of centre tuned
connector technology. Panels provide extensive
designation abilities, icon compatibility and
complete rear cable management to assist
in dressing cables and fixing screws. This range
is also available in an angled finish to increase
cabinet density.
PA R T N U M B E R PHD6AU24
Modular shielded panels come either complete
with modules or unloaded (order Ortronics
TKS6A to go with unloaded panel). Rear
management bar to assist in dressing cables
and easing installation is included.
DESCRIPTION
Clarity 6A/10G, Category 6A, 24 port, 1U, flat
PHA6AU24
Clarity 6A/10G, Category 6A, 24 port, 1U, angled
PHD6AU48
Clarity 6A/10G, Category 6A, 48 port, 2U, flat
PHA6AU48
Clarity 6A/10G, Category 6A, 48 port, 2U, angled
PHD66U24
Clarity 6, Category 6, 24 port, 1U, flat
PHA66U24
Clarity 6, Category 6, 24 port, 1U, angled
PHD66U48
Clarity 6, Category 6, 48 port, 2U, flat
PHA66U48
Clarity 6, Category 6, 48 port, 2U, angled
PA R T N U M B E R DESCRIPTION
PHDTKS6A24
Category 6A, 24 port, 1U, flat, with jacks
PHATKS6A24
Category 6A, 24 port, 1U, angled, with jacks
PHDTKS6A48
Category 6A, 48 port, 2U, flat, with jacks
PHATKS6A48
Category 6A, 48 port, 2U, angled, with jacks
PHDTKSU24
24 port, 1U, flat, unloaded*
PHATKSU24
24 port, 1U, angled, unloaded*
PHDTKSU48
48 port, 2U flat, unloaded*
PHATKSU48
48 port, 2U angled, unloaded*
*See page 9 for Cat 6A shielded Keystone jacks.
CLARITY CAT 6A SHIELDED
®
Clarity shielded panels offer rear loading shielded
110-terminated jacks to support improved ease
of termination and installation from the back of
the panel.
PA R T N U M B E R PHDPJS6A24
C O P P E R PAT C H PA N E L S
13
DESCRIPTION
Clarity 6A, Category 6A shielded, 24 port, 1U, flat, with jacks
C O P P E R PAT C H PA N E L S
CLARITY HIGH
DENSITY PANELS
TECHCHOICE CAT 6 / 5E UTP
®
®
24- and 48-port TechChoice patch panels are
available in the traditional multi-port panel format
with 6-port modules.
PA R T N U M B E R The HDJ series of jacks is supported by high density
flat or angled panel options, which includes 24 port
(1RU), 48 port (1RU) and 72 port (2RU) sizes. All
panels are supplied with rear cable management bars,
straps and ties.
DESCRIPTION
SP6U24
Category 6, 24 port, 1U, flat
SPA6U24
Category 6, 24 port, 1U, angled
SPA6U48
Category 6, 48 port, 2U, angled
Support up to 48 ports in 1 rack unit (1RU) cabinet density.
SP6U48
Category 6, 48 port, 2U, flat
SP5EU24
Category 5e, 24 port, 1U, flat
PA R T N U M B E R DESCRIPTION
Category 5e, 24 port, 1U, angled
PHAHJU24
24 port angled HDJ jack panel, unloaded, 1RU
SP5EU48
Category 5e, 48 port, 2U, flat
PHAHJU48
48 port angled HDJ jack panel, unloaded, 1RU
Category 5e, 48 port, 2U, angled
PHAHJU72
72 port angled HDJ jack panel, unloaded, 2RU
PHDHJU24
24 port flat HDJ jack panel, unloaded, 1RU
PHDHJU48
48 port flat HDJ jack panel, unloaded, 1RU
PHDHJU72
72 port flat HDJ jack panel, unloaded, 2RU
SPA5EU24
SPA5EU48
*See page 11 for high density jacks.
C O P P E R PAT C H PA N E L S
15
C O P P E R PAT C H C O R D S
CLARITY CAT 6A / 6 SHIELDED
®
Clarity shielded cords incorporate a flexible snagless plug
design that provides proper bend relief to ensure optimal
performance. They meet TIA component specifications to
centre tuning. These cords provide a significant elevation
of channel performance that can be field measured.
CLARITY SHIELDED CORDS IN LSZH
CLARITY SHIELDED CORDS IN PVC
PA R T N U M B E R DESCRIPTION
MCSZ1010M-xx Category 6A FTP, 1M, LSZH
MCS6A03-xx Category 6A FTP, 3 ft, PVC
MCSZ1020M-xx Category 6A FTP, 2M, LSZH
MCS6A05-xx Category 6A FTP, 5 ft, PVC
MCSZ1030M-xx Category 6A FTP, 3M, LSZH
MCS6A07-xx Category 6A FTP, 7 ft, PVC
MCSZ1050M-xx Category 6A FTP, 5M, LSZH
MCS6A09-xx Category 6A FTP, 9 ft, PVC
MCSZ610M-xx Category 6 FTP, 1M, LSZH
MCS6A15-xx Category 6A FTP, 15 ft, PVC
MCSZ620M-xx Category 6 FTP, 2M, LSZH
MCS6A20-xx Category 6A FTP, 20 ft, PVC
MCSZ630M-xx Category 6 FTP, 3M, LSZH
MCS6A25-xx Category 6A FTP, 25 ft, PVC
MCSZ650M-xx Category 6 FTP, 5M, LSZH
MCS603-xx Category 6 FTP, 3 ft, PVC
MCS605-xx Category 6 FTP, 5 ft, PVC
MCS607-xx Category 6 FTP, 7 ft, PVC
MCS609-xx Category 6 FTP, 9 ft, PVC
MCS615-xx Category 6 FTP, 15 ft, PVC
MCS620-xx Category 6 FTP, 20 ft, PVC
MCS625-xx Category 6 FTP, 25 ft, PVC
LSZH Clarity FTP cords are available in the following colours:
-02=red, -05=green, -06=blue, -08=gray, -09=white. Replace xx
with proper tailcode.
PA R T N U M B E R DESCRIPTION
PVC Clarity FTP cords are available in the following colours:
-02=red, -04 yellow, -08=gray, Replace xx with proper tailcode.
C O P P E R PAT C H C O R D S
17
C O P P E R PAT C H C O R D S
CLARITY CAT 6A / 6 UTP
®
Clarity modular patch cords are ETL verified to
component standards, while providing elevated
field-measurable channel performance.
CLARITY UTP CORDS IN LSZH
CLARITY UTP CORDS IN PVC
DESCRIPTION
PA R T N U M B E R MCZ61010M-xx Category 6A UTP, 1M, LSZH
MC61003-xx
Category 6A UTP, 3 ft, PVC
MCZ61020M-xx Category 6A UTP, 2M, LSZH
MC61005-xx
Category 6A UTP, 5 ft, PVC
MCZ61030M-xx Category 6A UTP, 3M, LSZH
MC61007-xx
Category 6A UTP, 7 ft, PVC
MCZ61050M-xx Category 6A UTP, 5M, LSZH
MC61009-xx
Category 6A UTP, 9 ft, PVC
MCZ610M-xx Category 6 UTP, 1M, LSZH
MC61015-xx
Category 6A UTP, 15 ft, PVC
MCZ620M-xx Category 6 UTP, 2M, LSZH
MC61020-xx
Category 6A UTP, 20 ft, PVC
MCZ630M-xx Category 6 UTP, 3M, LSZH
MC61025-xx
Category 6A UTP, 25 ft, PVC
MCZ650M-xx Category 6 UTP, 5M, LSZH
MC603-xx
Category 6 UTP, 3 ft, PVC
MC605-xx
Category 6 UTP, 5 ft, PVC
MC607-xx
Category 6 UTP, 7 ft, PVC
MC609-xx
Category 6 UTP, 9 ft, PVC
MC615-xx
Category 6 UTP, 15 ft, PVC
MC620-xx
Category 6 UTP, 20 ft, PVC
MC625-xx
Category 6 UTP, 25 ft, PVC
PA R T N U M B E R LSZH Clarity UTP cords are available in the following
colours: -02=red, -05=green, -06=blue, -08=gray,
-09=white. Replace xx with proper tailcode.
DESCRIPTION
PVC Clarity UTP cords are available in the following colours:
02=red, -04 yellow, -05=green, -06=blue, -08=gray, -09=white.
Replace xx with proper tailcode.
C O P P E R PAT C H C O R D S
19
COPPER CABLE
TECHCHOICE CAT 6 / 5E UTP
CLARITY CAT 6A SHIELDED
TechChoice patch cords offer a slim design for high
density applications and come factory terminated
with a snagless boot. Each cable is pre-tested for
component performance.
Clarity Category 6A U/FTP 100Ω data cable,
4 twisted pairs, individually shielded, low smoke
zero halogen sheathed for indoor installations.
TECHCHOICE UTP CORDS IN LSZH
500M reel.
®
PA R T N U M B E R SPCZ610M-xx
Category 6, UTP, 1M, pack of 10
SPCZ615M-xx
Category 6, UTP, 1.5M, pack of 10
SPCZ620M-xx
Category 6, UTP, 2M, pack of 10
SPCZ625M-xx
Category 6, UTP, 2.5M, pack of 10
SPCZ630M-xx
Category 6, UTP, 3M, pack of 10
SPCZ650M-xx
Category 6, UTP, 5M, pack of 10
SPCZ660M-xx
Category 6, UTP, 6M, pack of 10
®
Jacket colour: yellow.
DESCRIPTION
PA R T N U M B E R 100UF6AH-EU-04
CLARITY CAT 6 SHIELDED
®
Clarity Category 6 U/FTP 100Ω data cable,
4 twisted pairs, individually shielded, for
indoor installations.
LSZH TechChoice UTP cords are available in the following
colours: -05=green, -06=blue. Replace xx with proper
tailcode. For individual patch cords, add “A” after “SPCZ”
in part number.
Jacket colour: green.
500M reel.
PA R T N U M B E R DESCRIPTION
TECHCHOICE UTP CORDS IN PVC
PA R T N U M B E R DESCRIPTION
SPC603-xx
Category 6, UTP, 3ft, pack of 10
SPC607-xx
Category 6, UTP, 7ft, pack of 10
SPC610-xx
Category 6, UTP, 10ft, pack of 10
SPC615-xx
Category 6, UTP, 15ft, pack of 10
SPC5E03-xx
Category 5e, UTP, 3ft, pack of 10
SPC5E07-xx
Category 5e, UTP, 7ft, pack of 10
SPC5E10-xx
Category 5e, UTP, 10ft, pack of 10
SPC5E15-xx
Category 5e, UTP, 15ft, pack of 10
PVC TechChoice UTP cords are available in the following
colours: -00=black, -02=red, -04=yellow, -05=green,
-06=blue, -08=gray, -09=white. Replace xx with proper
tailcode. For individual patch cords, add "A" after "SPC"
in part number.
C O P P E R PAT C H C O R D S
21
100UF6H-EU-05 LSZH
100UFC6X-EU-05PVC/Riser
COPPER CABLE
CL ARI TY ® C AT 6A U TP
C L A R IT Y ® C AT 5 E U T P
Clarity Category 6A, 100Ω, 4 twisted pairs, low
smoke zero halogen sheathed, data cable for
indoor installations.
Clarity Category 5e, 100Ω, 4 twisted pairs,
low smoke zero halogen sheathed, data cable for
indoor installations.
Jacket colour: yellow.
Jacket colour: white.
500M reel.
305M reel in box.
PA R T N U M B E R 100UC6AH-EU-04
100UC5EH-EU-09
CL ARITY ® C AT 6 U TP
Clarity Category 6, 100Ω, 4 twisted pairs, low
smoke zero halogen sheathed, data cable for
indoor installations.
Jacket colour: green.
305M reel in box.
PA R T N U M B E R PA R T N U M B E R 100UC6H-EU-05
COPPER CABLE
23
FA C E P L AT E S
US FAC EP L ATES
FRANCE
Ortronics TracJack and TechChoice plastic faceplates
are available in a variety of port capacities to match
your workstation applications.
Programme Mosaic adapters for TracJack are all
rear load and come in 2 varieties, flush and indented.
Standard coulour is fog white.
PA R T N U M B E R DESCRIPTION
40300548 Holds two TracJacks
40300546
Holds four TracJacks
KSFP2
Holds two keystones
KSFP4 Holds four keystones
PA R T N U M B E R DESCRIPTION
FPK1TJ
22.5 x 45mm flush single
FPK2TJ
45 x 45mm flush double
FPIK2TJ
22.5 x 45mm indented single
T E C H C H O IC E
A D A P T E R S / B E Z E LS
®
TracJack and TechChoice faceplates are available in the
following additional colours: -13=electrical ivory, -88=white,
-99=Wiremold ivory. Add tailcode to end of part number.
Please contact Ortronics for additional sizes and finishes.
For the TechChoice keystone range of connectors.
All adapter/bezels hold one TechChoice or
Keystone Jack.
UK
The UK bezel is a 6Ce foot print.
Synergy TracJack faceplates are compatible with
the Synergy range of wiring devices available from
Legrand Electric, giving you the option to perfectly
match all the faceplates in your office or home.
Complete with integral shutters/fixing screws
and screw covers.
®
The French Bezel is a 45 x 45mm Mosaic.
Standard coulour is white.
PA R T N U M B E R DESCRIPTION
6C TracJack bezel with integral shutter.
FPF8686
UK faceplate frame,
holds 2 bezels
PA R T N U M B E R DESCRIPTION
FPF86146
UK faceplate frame,
holds 4 bezels
40300745P-88
Single gang, 1 jack
KSB6CE
UK bezel, pack of 10
40300746P-88
Single gang, 2 jack
KSB2550
40300747P-88
Double gang, 4 jack
FPMK1TC
42100018P-88
6C single bezel
FA C E P L AT E S
25
UK bezel blank, pack of 10
Mosaic bezel, pack of 10
F I B R E C A B I N E T S / PA N E L S
COPPER W OR KS TATI ON
C A B IN E T S
Ortronics TracJack and TechChoice surface
mount boxes are available to house two and
four TracJacks.
Each fibre cabinet offers complete flexibility allowing
the ability to patch and splice in the same cabinet.
Each cabinet has optimized cable entry and exit
points, allows access to terminations from front
and rear, and accommodates the unique needs
of optical fibre bend radius limitation through
enhanced patch cord management devices and
novel internal fibre management components.
®
®
®
Bases are easily installed with supplied screws
or double-sided adhesive. Snap-on covers
have recessed label fields. Boxes are ruggedly
constructed from high impact thermo-plastic.
94V-0 rated.
TracJack blanks are also available.
PA R T N U M B E R These surface mount boxes are also available
for the TechChoice TC range.
FC01U-C
1U, holds 3 adapter panels
FC02U-C
2U, holds 6 adapter panels
PA R T N U M B E R DESCRIPTION
404TJ2-88
2 x TJ surface mount
404TJ4-88
4 x TJ surface mount
42100002-88
KSSMB2
2 x TC surface mount
KSSMB4
4 x TC surface mount
PA N E L S
TracJack blanks
The rack mount fibre panel is ideally suited for
both large and small fibre installations offering
complete flexibility in terms of cable entry
and exit, access to front, rear, and top, and
accommodation for the unique needs of optical
fibre bend radius limitation through enhanced patch
cord management devices and innovative internal
fibre management components.
The Jak-Pak is a compact, flexible, multi-user
solution that can be structurally mounted or
used in more temporary environments. Kits come
supplied with 6 port module and heat shrink.
PA R T N U M B E R JP66U
DESCRIPTION
PA R T N U M B E R Clarity Jac-Pak mount
61500569-00
C O P P E R W O R K S TAT I O N
DESCRIPTION
27
DESCRIPTION
1U, holds 3 adapter panels
O R T RO NICS .COM
IS YOUR COMPLETE
RESOURCE FOR ORTRONICS ®
HIGH PERFORMANCE
NETWORK INFRASTRUCTURE
PRODUCTS AND SOLUTIONS.
Visit ortronics.com to access:
• Interactive catalog and product database
• Brochures, white papers and design tools
• Live and online training information
• Warranty specifications and requirements
The website is available in English, French, Spanish
and Chinese.
FIBRE MODULES
PA R T N U M B E R DESCRIPTION
OFP-SCD06MB
3 SC duplex MM beige
OFP-SCD06AC
3 SC duplex SM blue
OFP-SCD06LC
3 SC duplex MM aqua
OFP-SCD12MB
6 SC duplex MM beige
OFP-SCD12AC
6 SC duplex SM blue
OFP-SCD12LC
6 SC duplex MM aqua
OFP-BLANK
PA R T N U M B E R OFP-LCD12MB
6 LC duplex MM beige
OFP-LCD12AC
6 LC duplex SM blue
OFP-LCD12LC
6 LC duplex MM aqua
OFP-LCQ24MB
6 LC quad MM beige
OFP-LCQ24AC
6 LC quad SM blue
OFP-LCQ24LC
6 LC quad MM aqua
OFP-BLANK
Blank panel
SC AN D L C MOD U L ES
The Ortronics OptiMo OFP series adapter
panels are used with our popular FC Series modular
fibre cabinets, offering great flexibility in structured
cabling design. Front-removable adapter panels
are available with LC or SC modules and feature options
ideal for both single mode and multimode applications.
They are held securely in place with plunger/grommet
fasteners. Where applicable, the adapters used
(LC and SC) contain application specific alignment
sleeves to ensure optimal performance in conjunction
with the economic constraints of network design.
For multimode applications, phosphor-bronze
(metal) alignment sleeves are commonly
utilized, while most single mode adapters and adapters
for higher performance multimode applications contain
ceramic alignment sleeves, ensuring dependable
transmission in demanding single mode applications.
®
®
FIBRE MODULES
31
DESCRIPTION
Blank panel
FIBRE CORDS
5 0 /1 25µ m OM3
PAT CH C OR D S
S IN G L E M O D E
PAT C H C O R D S
Ortronics has developed the best connectors
in the industry for our fibre system components.
Ortronics has selected the best connectors
in the industry for our fibre system components.
All cords are duplex, coloured aqua, 2mm zip cord.
All cords are duplex, coloured yellow, 2mm zip cord.
Insertion loss maximum 0.50 dB per connection.
Insertion loss maximum 0.30 dB per connection.
PC/LSZH
UPC/LSZH
®
PA R T N U M B E R ®
DESCRIPTION
P1DF2LLGZGZ00xM
LC–PC to LC–PC
P1DC2ILSZSZ00xM
LC–UPC to LC–UPC
P1DF2LLFZFZ00xM
SC–PC to SC–PC
P1DC2ILRZRZ00xM
SC–UPC to SC–UPC
P1DF2LLFZGZ00xM
LC–PC to SC–PC
P1DC2ILRZSZ00xM
LC–UPC to SC–UPC
PC/OFNR
PA R T N U M B E R PA R T N U M B E R DESCRIPTION
UPC/OFNR
DESCRIPTION
P1DF2LRGZGZ00xM
LC-PC to LC-PC
P1DC2IRSZSZ00xM
P1DF2LRFZFZ00xM
SC-PC to SC-PC
P1DC2IRRZRZ00xM
SC–UPC to SC–UPC
P1DF2LRFZGZ00xM
LC-PC to SC-PC
P1DC2IRRZSZ00xM
LC–UPC to SC–UPC
50/125um OM3 patch cords are available in 1, 2 and
3 metre lengths. Replace "x" with desired length.
FIBRE CORDS
PA R T N U M B E R DESCRIPTION
LC–UPC to LC–UPC
Single mode patch cords are available in 1, 2 and
3 metre lengths. Replace "x" with desired length.
33
FIBRE CABLE
OM 3 BU L K F I B R E OP TI C
CABLE – TIGHT BUFFERED
O M 4 B U L K F IB R E OPT I C
CABLE – TIGHT BUFFERED
900 micron tight buffered, multi-fibre, bendoptimized OM3 fibre distribution cable for indoor/
outdoor applications.
900 micron tight buffered, multi-fibre, bendoptimized OM4 fibre distribution cable for indoor/
outdoor applications.
Jacket colour: aqua LSZH.
Jacket colour: aqua LSZH.
2,100M reel.
PA R T N U M B E R 2,100M reel.
DESCRIPTION
PA R T N U M B E R 211F4TGLZOM3
4 fibre
211F4TGLZOM4
4 fibre
211F6TGLZOM3
6 fibre
211F6TGLZOM4
6 fibre
211F8TGLZOM3
8 fibre
211F8TGLZOM4
8 fibre
211F12TGLZOM3
12 fibre
211F12TGLZOM4
12 fibre
211F24TGLZOM3
24 fibre
211F24TGLZOM4
24 fibre
DESCRIPTION
OM 3 BU L K F I B R E OP TI C
CABLE – LOOSE BUFFERED
O M 4 B U L K F IB R E OPT I C
CABLE – LOOSE BUFFERED
Loose tube, gel-filled, multi-fibre, bend-optimized
OM3 fibre cable for outdoor applications.
Loose tube, gel-filled, multi-fibre, bend-optimized
OM4 fibre cable for outdoor applications.
Jacket colour: aqua LSZH.
Jacket colour: aqua LSZH.
2,100M reel.
PA R T N U M B E R 211F4LZAD0M3L
211F6LZAD0M3L
2,100M reel.
DESCRIPTION
PA R T N U M B E R 4 fibre
211F4LZAD0M4L
4 fibre
6 fibre
211F6LZAD0M4L
6 fibre
211F8LZAD0M3L
8 fibre
211F8LZAD0M4L
8 fibre
211F12LZAD0M3L
12 fibre
211F12LZAD0M4L
12 fibre
211F24LZAD0M3L
24 fibre
211F24LZAD0M4L
24 fibre
FIBRE CABLE
35
DESCRIPTION
FIBRE CABLE
OS2 SI N GL E MOD E
B UL K F I B R E OP TI C
CABLE – TIGHT BUFFERED
O S 2 S IN G L E M O D E
B U L K F IB R E O P TI C
CABLE – LOOSE BUFFERED
900 micron tight buffered, multi-fibre, bendoptimized OS2 fibre distribution cable for indoor/
outdoor applications.
Loose tube, gel-filled, multi-fibre, bend-optimized
OS2 fibre cable for outdoor applications.
Jacket colour: yellow LSZH.
Jacket colour: yellow LSZH.
2,100M reel.
2,100M reel.
PA R T N U M B E R DESCRIPTION
PA R T N U M B E R 211F4TGLZ9
4 fibre
211F4LZAD9
4 fibre
211F6TGLZ9
6 fibre
211F6LZAD9
6 fibre
211F8TGLZ9
8 fibre
211F8LZAD9
8 fibre
211F12TGLZ9
211F24TGLZ9
12 fibre
24 fibre
211F12LZAD9
12 fibre
211F24LZAD9
24 fibre
FIBRE CABLE
37
DESCRIPTION
FIBRE ACCESSORIES
ACCESSORIES
H E AT S H R IN K S PLI CE
P R O T E C T O R S L EE V E S
Available in 2 lengths.
Pack of 50.
SI NGL E P I GTA I L S
Available in OM3 and single mode.
All pigtail products include a 1 metre breakout
section consisting of 900 μm buffered fibre
with terminated ends. LC & SC cable assemblies
have connectors with ceramic ferrules.
PA R T N U M B E R DESCRIPTION
20500043 40mm Heat shrink sleeve
20500130 60mm Heat shrink sleeve
Insertion loss maximum 0.50 dB per connection for
multimode and 0.30 dB maximum for single mode.
PC/LSZH and UPC/LSZH
PA R T N U M B E R F IB R E S P L IC E T RAY
F O R 1 2 S P L IC E S
DESCRIPTION
P1PF9FLFZZZ00xM
OM3 SC-PC
P1PF9FLGZZZ00xM
OM3 LC-PC
P1PC9FLRZZZ00xM
SM SC-UPC
P1PC9FLSZZZ00xM
SM LC-UPC
Transparent stackable design with hinged cover
and mylar insert. Ideal for VFL verifications.
PC/OFNR and UPC/OFNR
PA R T N U M B E R P1PF9FRFZZZ00xM
OM3 SC-PC
P1PF9FRGZZZ00xM
OM3 LC-PC
P1PC9FRRZZZ00xM
SM SC-UPC
P1PC9FRSZZZ00xM
SM LC-UPC
PA R T N U M B E R DESCRIPTION
FST2-F012
Use with FC fibre enclosures
61500016 DESCRIPTION
Single pigtails are available in 1 and 2 metre lengths.
Replace "x" with desired length.
Please contact Ortronics for additional lengths, fibre
counts and connector configurations.
F I B R E P I G TA I L S
39
Use with 615 fibre enclosures
MIGHTY MO GX CABINETS
®
MIGHTY MO GX CABINETS
A C C E S S O R IE S
Mighty Mo GX cabinets are fully modular and
configurable to suit the needs of any installation.
Each cabinet can be assembled with as few or as
many accessories as needed to properly support
servers, switches and patch panels. The cabinets
are designed to stand alone or easily gang together,
as network demands increase.
®
PA R T N U M B E R DESCRIPTION
GXC4229ADK-B
Air dam kit, for 42U x 29.5"W
frames, black
GXC4229SPB-B
Side patching baffle, for
42U x 29.5"W frames, black
MM6BLC
Bend limiting clips
PS-1224CN
Cage nuts
60400533Screws
PRE-C ON F I GU R ATI ON S
PA R T N O . GXC422442-A1-B
GXC422942-A1-B
DESCRIPTION
BAFFLES
Server cabinet assembly,
42U x 24"W x 42"D, black
Network cabinet assembly,
42U x 29.5"W x 42"D, black
PA R T N U M B E R DESCRIPTION
Please contact Ortronics for additional configurations.
GXCAB421629
Baffle, for 42U x 29.5"W
frame with management
angles of 16.25"
CABLE MA N A GEMEN T
GXCAB421629SA
Baffle, for 42U x 29.5"W with
management angles of 16.25"
with side panels installed
GXCAB423029
Baffle, for 42U x 29.5"W frame
with management angles of 30"
GXCAB423029SA
Baffle, for 42U x 29.5"W with
management angles of 30"
with side panels installed
PA R T N O . GXC29WMK-5 DESCRIPTION
Wire manager kit, set of (5)
29.5"W frames, black
GXC4206VWT-B
Vertical wire trellis, 42U, 6"W,
black
GXC42VFK
Vertical finger kit, 42U,
for (1) vertical rail
GXC42VPMLD
Vertical lacing bar/PDU
management bar 42U,
double wide, black
GXC42VPMLS
Vertical lacing bar/PDU
management bar 42U, single
wide, black
MIGHTY MO GX CABINETS
®
41
MIGHTY MO 6 RACKS
®
M IGHTY MO 6 R A C K
MIGHTY MO END PANELS
Mighty Mo 6 racks are available in 6.5," 10.5"
and 16.25" channel depths and are designed
specifically for large and heavy network equipment.
The end panel is used to finish the end of a row
of Mighty Mo racks. It mounts flush and provides
a surface for the vertical cable management channel
while concealing cables in the rack channel.
®
PA R T N O . Colour is black.
DESCRIPTION
MM6706
7ft (45U), 6.5" channel depth
MM6710
7ft (45U), 10.5" channel depth
MM6810
8ft (51U), 10.5" channel depth
M IGHTY MO 6
VER T IC A L MA N A GER
Hinged doors allow easy access during moves, adds,
and changes. 10" wide cage creates a 6.5" gap
between racks. 6" wide cage creates a 2.5" gap
between racks for front-to-back routing of equipment
cables and patch cords. Both are supplied with four
spools and 12 bend-limiting clips.
Colour is black.
PA R T N O . DESCRIPTION
MM6VMD706 7ft, 6" wide with door
MM6VMD806
8ft, 6" wide with door
MM6VMD710
7ft, 10" wide with door
MM6VMD810
8ft, 10" wide with door
MM6VMDs can be used with the MM10 racks.
MIGHTY MO 6 RACKS
®
43
PA R T N U M B E R DESCRIPTION
MM6EP710 7ft, 10.25" channel depth
MM6EP810 8ft, 10.25" channel depth
MM6EPN716 7ft, 16.25" channel depth
MM6EPN816 8ft, 16.25" channel depth
MM10EPS End panel support brace
MIGHTY MO 10 RACKS
®
M IGHTY MO 10 R A C K
M IG H T Y M O 1 0 SE R V E R
Designed to maximize the airflow of network equipment.
The patent designed honeycomb side rails and baffles
combine to manage intake and exhaust air creating
cold aisle/hot aisle air distribution from side vented
equipment. The bottom flange turns inward, allowing
it to fit on a 2' x 2' (600mm x 600mm) floor tile.
The Mighty Mo 10 server rack works with all of the
Mighty Mo 6 and 10 racks and cable management.
The mounting rails adjust from 12.5" to 30,"
independent of the structural members, allowing
the rails to be adjusted after the rack is installed.
®
Mighty Mo vertical managers can be mounted
front or rear.
Colour is black.
Colour is black.
PA R T N U M B E R DESCRIPTION
MM10716
7ft (45U) 16.25" channel depth
MM10816
8ft (51U) 16.25" channel depth
MIGHTY MO 10
VERTICAL MANAGER
Hinged doors allow easy access. 16" wide cage
creates a 12.25" gap between racks. 12" wide cage
creates a 8.25" gap between racks for front-to-back
routing of cables and patch cords. Angled section
at the rear allows for fitting of baffle kit if required.
DESCRIPTION
MM10VMD712 7ft 12" wide with door
MM10VMD812 8ft 12" wide with door
MM10VMD716 7ft 16" wide with door
MM10VMD816 8ft 16" wide with door
MM107SVR 7ft (45U) server rack
MM108SVR 8ft (51U) server rack
MM107SVRABR 7ft baffle rail kit
MM108SVRABR 8ft baffle rail kit
Mighty Mo 10 airflow baffles mount between racks
and direct intake and exhaust air on side flow
network equipment from cold aisle to hot aisle.
Colour is black.
Please ensure correct baffle to VMD combination.
MIGHTY MO 10 RACKS
®
DESCRIPTION
MIGHTY MO BAFFLE KITS
Both are supplied with four spools and 12 bend-limiting
clips. Colour is black.
PA R T N U M B E R PA R T N U M B E R 45
PA R T N U M B E R DESCRIPTION
MM10AB71612
Use with MM10VMD712
MM10AB81612
Use with MM10VMD812
MM10AB71616
Use with MM10VMD716
MM10AB81616
Use with MM10VMD816
MIGHTY MO ACCESSORIES
®
MIGHTY MO
HORIZONTAL MANAGEMENT
B L A N K F IL L E R P LAT E S
®
Ortronics blank filler panels fill in open spaces
on all standard 19" EIA racks. They are available
in two options: a black powder coated aluminum
angled version and a flat toolless plastic
snap-in version.
Ortronics Mighty Mo cable management panels
are optimized to organize patch cords vertically and
horizontally on our Mighty Mo racks. They will also
mount on any standard 19" rack. The finger design
encourages defined and traceable routing of
individual patch cords.
®
Colour is black.
PA R T N U M B E R DESCRIPTION
BFPA-1RU 1U angled blank
BFPA-2RU 2U angled blank
PA R T N U M B E R DESCRIPTION
MM6HMF1RU Multi finger 1U
MM6HMF2RU Multi finger 2U
BFPT-1RU-10
1U toolless blank, pack of 10
MM6HM61RU 5 finger 1U
BFPT-2RU-10
2U toolless blank, pack of 10
MM6HM62RU 5 finger 2U
PANEL MOUNTING SCREWS
Replace lost or damaged screws for patch panels
and cable management panels. These combination
head screws with #12-24 threads have a pilot point
for easy starting.
CABLE MA N A GEMEN T
Ortronics cable management panels provide
organized movement of patch cables horizontally
and vertically on 19" EIA distribution racks.
PA R T N U M B E R DESCRIPTION
808004759 5 horizontal ring top entry 1U
808045590 5 horizontal ring front entry 1U
808044855 4 horizontal, 4 vertical, 24 dist rings 2U
MIGHTY MO ACCESSORIES
®
PA R T N U M B E R DESCRIPTION
Pack of 50 screws
40300533 BASE DUST COVER
Prevents dust and debris from accumulating in rack
base. Scored for bending to clear cables from floor
up to channel.
47
PA R T N U M B E R DESCRIPTION
Cover for 16.25" deep rack
MM6BDC16 M I G H T Y M O F I B R E R A C E W AY
®
MIGHTY MO FIBRE RACEWAY
®
Ortronics Mighty Mo Fibre Raceway provides an
easy to install, flexible plastic solution that’s ideal
for routing fibre above racks and cabinets. Fibre
Raceway provides a path for critical network
cabling in a variety of environments, including
telecommunications exchanges, data centres,
universities and hospitals.
Features and Benefits
n Made from Noryl , a halogen free, fire retardant,
metal free, zero dust plastic
n All standard parts are delivered “slotted” for
easy installation
n Easy installation joiners snap together all
system components
n Available with and without covers
®
Breakouts can be easily and safely added, even
after fibre cables are installed
n RoHS compliant
n
n
UL2024A standard certified
Product Offering
n Range
– 260 SKUs
– 22 categories of duct and fittings
– 4 tool styles
n Sizes
– 5 sizes available
– 2” x 2” up to 12” x 4”
– All 6’ 6-3/4” long
n Colours
– Yellow is standard
– Orange and black available by special order
M I G H T Y M O F I B R E R A C E W AY
®
49
Please visit www.ortronics.com/solutions/fiber-raceway
for specific part numbers.
MIGHTY MO AIR CONTROL
®
MIGHTY MO AIR CONTROL
MIGHTY MO
AIR CONTROL DOORS
®
Mighty Mo Air Control solutions improve data centre
cooling efficiency and reduce cooling requirements
by separating hot and cold aisles.
Mighty Mo Air Control Doors are installed with vinyl
panels or roof systems to provide containment at the
end of a row of cabinets or racks.
MIGHTY MO AIR CURTAINS
Mighty Mo Air Curtains are fire resistant hanging
vinyl panels that mount to aluminum tracks that
hang from the ceiling via heat release fusible links.
PA R T N U M B E R PA R T N U M B E R DESCRIPTION
MALDRS80X89DL Air door, sliding, 80"H x 89"W, dual 24"
M
with doors, clear
MALDRS80X89LH Air door, sliding, 80"H x 89"W, single 36"
M
with door, left, clear
DESCRIPTION
MMACNPXXxYY Vinyl panel kit, XX”H x YY”L
MALDRS80X89RH Air door, sliding, 80"H x 89"W, single 36"
M
with door, right, clear
Available heights(XX)=29, 56, 98, 110, 122, 146, 182.
Available lengths(YY)=12, 24, 36, 48, 60, 72.
MMALDRH80X56LH Air door, hinged, 80"H x 56"W, left hand open, clear
MMALDRH80X56RH Air door, hinged, 80"H x 56"W, right hand open, clear
MMACNCPXXx12 Vinyl corner panel kit, XX”H x 12”L
Standard door frame color is clear aluminum. For Black, add a “-B” to the end
of the part number. Custom sizes available.
Available heights(XX)=29, 56, 98, 110, 122, 146, 182.
MMACNSXXxYY Vinyl strip door kit, XX”H x YY”L
MIGHTY MO AIR CAP
AND AIR PANEL ROOF
Available heights(XX)= 98, 110, 122, 146, 182.
Available lengths(YY)=12, 24, 36, 48, 60, 72.
Standard product kits include fusible links for 1” drop
ceiling. For unistrut compatible vinyl kits add a “U” before
the dimensions in the part number ex. MMACNPUXXxYY.
Mighty Mo Air Cap and Air Panel Roof systems
attach to the top of racks and cabinets to create a
barrier that prevents hot and cold air from mixing.
The Air Cap is a retractable roof system; the Air Panel
Roof has heat sensitive panels that drop away during
a fire event.
M IGHTY MO A I R P L U GS
Mighty Mo Air Plugs are soft compressible fireproof
cubes that are used to block airflow through
openings in floors and cabinets.
PA R T N U M B E R DESCRIPTION
MMAPLXXYY Air plug, 5” x XX” x YY”, black
Available widths(XX) = 4, 6, 9, 12, 14, 16, 18, 20, 24.
Available lengths(YY) = 4, 6, 9, 12, 14, 16, 18, 20, 24.
MIGHTY MO AIR CONTROL
®
PA R T N U M B E R MMACAP60X30
Air cap, 60"W x 30’L, black
MMACAP84X30
Air cap, 84"W x 30’L, black
MMAPR56X80
Air panel roof, 2”H x 55-1/2”W x 79-1/2”L, clear
MMAPR56X80-B
Air panel roof, 2”H x 55-1/2”W x 79-1/2”L, black
Custom sizes available.
51
DESCRIPTION
GENE R A L A C C ES S OR I ES
PA R T N U M B E R DESCRIPTION
70700080-xx
6" cable management straps
70700079-xx 12" cable management straps
60300005 110 punch down tool
60300006 110 replacement blade
60300032 Stripping tool
403xx100 Voice icon
403xx200 Data icon
403xx500 Blank icon
Cable managment straps are available in the following
colours: -00=black, -22=red, -23=orange, -24=yellow,
-25=green, -26=blue. Place tailcode at end of part number.
Icons are available in the following colours. Replace xx
with 00=black, 09=fog white, 13=Electrical ivory, 22=red,
23=orange, 24=yellow, 25=green, 26=blue, 27=purple.
GENERAL ACCESSORIES
Latin America Headquarters
Montes Urales NO. 715 3er Piso
Col. Lomas de Chapultepec
MEXICO D.F. - C.P. 11000
Phone: +52.55.5201.6450
Asia Pacific Headquarters
125 Eugene O’Neill Drive
New London, CT 06320
Phone: 860.445.3900
Fax: 860.405.2992
Ortronics
Global Headquarters
125 Eugene O’Neill Drive
New London, CT 06320
Phone: 860.445.3900
Fax: 860.405.2992
www.ortronics.com
©2012 Ortronics All Rights Reserved rev.12|12
Europe/Middle East/Africa
Headquarters
Great King Street North
Birmingham, B19 2LF
United Kingdom
Phone: +44 (0) 1344 751 228

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project