null  null
Introduction
Connections
DV-S717
DVD Player
Basic Playback
Instruction Manual
CINEMA SCAN
STANDBY/ ON
ENTER
RETURN
STANDBY
POWER
OFF
OPEN/CLOSE
PHONER LEVEL
TITLE
MENU
PAUSE
STOP
PLAY
DIMMER
MAX
DVD / VIDEO CD / CD PLAYER
THIS DVD PLAYER IS MANUFACTURED FOR PLAYBACK
O F R E G I O N 1 ( U S A , C A N A DA ) E N C O D E D DV D
SOFTWARE. USE OF SOFTWARE NOT INTENDED FOR
REGION 1 PLAYBACK MAY RESULT IN UNDESIRABLE
PLAYER PERFORMANCE.
DV-S717
Advanced Playback
MIN
Function Setup
PHONER
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Others
Thank you
for your purchase of the Onkyo DVD
player.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable you
to obtain optimum performance and listening enjoyment
from your new DVD player.
Please retain this manual for future reference.
Safety Precautions
“WARNING”
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
“TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.”
CAUTION:
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
“TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.”
WARNING
AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
Important Safeguards
1. Read Instructions – All the safety and operating
instructions should be read before the appliance is
operated.
10. Power Sources – The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.
2. Retain Instructions – The safety and operating
instructions should be retained for future reference.
11. Polarization – If the appliance is provided with a
polarized plug having one blade wider than the other,
please read the following information: The polarization
of the plug is a safety feature. The polarized plug will
only fit the outlet one way. If the plug does not fit fully
into the outlet, try reversing it. If there is still trouble,
the user should seek the services of a qualified
electrician. Under no circumstances should the user
attempt to defeat the polarization of the plug.
3. Heed Warnings – All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions – All operating and use
instructions should be followed.
5. Water and Moisture – The appliance should not be
used near water – for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the like.
6. Carts and Stands – The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
PORTABLE CART WARNING
6A. An appliance and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces
may cause the
appliance and cart
combination to overturn.
12. Power- Cord Protection – Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them,
especially wear plugs, convenience receptacles, and
the point where they exit from the appliance.
13. Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
14. Nonuse Periods – The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
S3125A
7. Wall or Ceiling Mounting – The appliance should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
8. Ventilation – The appliance should be situated so that
its location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or if placed in a built-in
installation, such as a book case or cabinet that may
impede the flow of air through the ventilation openings,
there should be free space of at least 5 cm (2 in.) and
open up behind the appliance.
9. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or
appliances (including
amplifiers)
Downloaded Fromother
DvDPlayer-Manual.com
Onkyo
Manualsthat produce heat.
15. Object and Liquid Entry – Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
16. Damage Requiring Service – The appliance should
be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally
or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
17. Servicing – The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
Precautions
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT
EXPOSURE TO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
FOR U.S.A. MODEL:
1.This laser is covered by a housing which prevents exposure during operation or maintenance. However, this product
is classified as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a department of the
Food and Drug Administration. According to their regulations 21 CFR section 1002.30, all manufactures who sell
Laser Products must maintain records of written communications between the manufacturer, dealers and customers
concerning radiation safety. If you have any complaints about instructions or explanations affecting the use of this
product, please feel free to write to the address on the back page of this manual. When you write us, please include
the model number and serial number of your DVD player.
2.In compliance with Federal Regulations, the certification, identification and the period of manufacture are indicated
on the real panel.
3.FCC INFORMATION FOR USER
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, it not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications made to this equipment, not expressly approved by Onkyo, or parties authorized by
Onkyo, could void the user’s warrantee of the equipment.
“CLASS 1 LASER
PRODUCT ”
This label on the rear panel of the unit states that:
1.This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet.
2.To prevent the laser from being exposed, do not remove the cover. Refer servicing to
qualified personnel.
FOR CANADIAN MODEL:
(POUR LE MODELE CANADIEN)
• THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM
DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN
DEPARTMENT OF COMMUNICATIONS.
• L'INTERFERENCE, RADIO ELECTRIQUE GENEREE PAR CET APPAREIL NUMERIQUE DE TYPE B NE
DEPASSE PAS LES LIMITES ENONCEES DANS LE REGLEMENT SUL LES PERTURBATIONS RADIO
ELECTRIQUES, SECTION APPAREIL NUMERIQUE, DU MINISTERE DES COMMUNICATIONS.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Introduction
DANGER:
Precautions
FOR CANADIAN MODEL:
POUR LE MODELE CANADIEN:
For models having a power cord with a polarized plug.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM DIGITAL
APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN DEPARTMENT OF
COMMUNICATIONS.
Sur les modèles dont la fiche est polarisée.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
• L’INTERFERENCE, RADIO ELECTRIQUE GENEREE PAR CET APPAREIL NUMERIQUE DE TYPE B NE DEPASSE PAS LES LIMITE
ENONCEES DANS LE REGLEMENT SUL LES PERTURBATIONS RADIO ELECTRIQUES, SECTION APPAREIL NUMERIQUE, DU
MINISTERE DES COMMUNICATIONS.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
You can find the serial number on the rear panel. In case of
warranty claim, please report this number.
Notes on Handling
When shipping the DVD player, the original shipping carton
and packing materials come in handy. For maximum
protection, repack the unit as it was originally packed at the
factory.
Do not use volatile liquids, such as insect spray, near the
DVD player. Do not leave rubber or plastic products in
contact with the DVD player for a long time. They will leave
marks on the finish.
The top and rear panels of the DVD player may become
warm after a long period of use. This is not a malfunction.
When the DVD player is not in use, be sure to remove the
disc and turn off the power.
If you do not use the DVD player for a long period, the unit
may not function properly in the future. Turn on and use the
DVD player occasionally.
Notes on Placement
Notes on Moisture Condensation
Moisture condensation damages the DVD player.
Please read the following carefully.
Moisture condensation occurs, for example, when you pour a
cold drink into a glass on a warm day. Drops of water form on
the outside of the glass. In the same way, moisture may
condense on the optical pick-up lens inside this unit, one of
the most crucial internal parts of the DVD player.
Examples of moisture
condensation
Moisture condensation occurs during the
following cases.
When you bring the DVD player directly from a cold place
to a warm place.
When you use the DVD player in a room where you just
turned on the heater, or a place where the cold wind from
the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD player in a humid place.
When you place this DVD player near a TV, radio, or VCR,
the playback picture may become poor and the sound may
be distorted. In this case, place the DVD player away from
the TV, radio, or VCR.
Notes on Cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD
player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
To Obtain a Clear Picture
The DVD player is a high technology, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality becomes poor. To obtain a clear
picture, we recommend regular inspection and maintenance
(cleaning or parts replacement) every 1,000 hours of use
depending on the operating environment. For details, contact
your nearest dealer.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Do not use the DVD player when moisture
condensation may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc, connect
the power cord of the DVD player to the wall outlet, turn on
the DVD player, and leave it for two or three hours. After
two or three hours, the DVD player will have warmed up
and evaporated any moisture. Keep the DVD player
connected to the wall outlet and moisture condensation will
seldom occur.
Introduction
Warranty Claim
Features
Audiophile-class DVD/VIDEO CD/CD player
Component Video Outputs (Gold-Plated)
Dolby* Digital Audio Output
10-Bit Video D/A conversion
Optical & Coaxial digital audio output
Complete front-panel control
4-power picture zoom
Brushed aluminum front panel
DTS** Bitstream Digital Out
3D DNR function
* Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992-1997
Dolby Laboratories, Inc. All rights reserved.
** "DTS" and "DTS Digital Surround" are trademarks of Digital
Theater Systems, Inc.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Table of Contents
Safety Precautions .................................... 2
Important Safeguards ............................... 2
Precautions ............................................ 3-5
Features .................................................... 6
Identification of Controls ...................... 8-11
Front Panel/Rear Panel/DVD display
Remote Controller
Preparing the Remote Controller
Operating with the Remote Controller
Introduction
Introduction
Connecting to a TV ................................. 12
Connecting to an Audio System and TV with
COMPONENT VIDEO Inputs .................. 13
Connecting to Optional Equipment ... 14, 15
Connecting to an Amplifier Equipped with a Dolby Digital Decoder
Connecting to an Amplifier Equipped with a Dolby Pro Logic Surround
Connecting to an Amplifier Equipped with a DTS Decoder
Connecting to an Amplifier Equipped with a Digital Audio Input
Connections
Connections
Playing a Disc .................................... 16-19
Basic Playback
Using the Shuttle Ring
Using the Jog Dial
Fast Reverse Playback, Fast Forward Playback
Playing in Slow-Motion
Resuming Playback from the Same Location
Locating a Specific Title, Chapter,
or Track ............................................. 20, 21
Locating a Title Using the Title Menu
Locating a Title
Locating a Specific Chapter or Track Directly
Locating a Specific Chapter or Track
Basic Playback
Basic Playback
Advanced Playback
storing Locations in the Memory
Locating a Specific Location by Entering the Time
Playing Repeatedly ................................. 23
Repeating a Title, Chapter, or Track
Repeating a Specific Segment
Playing in a Favorite Order ..................... 24
Setting Titles, Chapters, or Tracks in a Favorite Order
Playing in Random Order ............................... 25
Playing Titles in Random Order
Playing Chapters or Tracks in Random Order
Selecting 3D DNR Picture Enhancement ....... 26
Zooming a Picture .......................................... 27
Zooming a Picture
Selecting the Camera Angle ................... 28
Changing the Camera Angle
Selecting a Language ............................. 29
Selecting a Playback Audio Setting
Selecting Subtitles .................................. 30
Turning Subtitles On or Off
Selecting a Subtitle Language
Using the On-Screen Display .................. 31
Advanced Playback
Playing From the Desired Location ......... 22
Checking the Operational Status
Checking the Remaining Time and Setting Status
Selecting 3D DNR On/Off
Customizing the Function Settings .... 32-45
Selecting a Setting Category
LANGUAGE Setting
PICTURE Setting
AUDIO Setting
DISPLAY Setting
OPERATION Setting
Table of Languages ................................ 46
Table of Languages and Their Abbreviations
Function Setup
Function Setup
Notes on Discs ........................................ 47
On Handling Discs
On Cleaning Discs
On Storing Discs
About This Instruction Manual
Notes on Region Numbers
PlayableOnkyo
Discs Manuals
Downloaded From DvDPlayer-Manual.com
On VIDEO CDs
Notes on Copyright
Before Calling Service Personnel ........... 48
Symptoms and Correction
Specifications .......................................... 49
Others
Others
Identification of Controls
See the page in
for details.
Front Panel/Rear Panel/DVD Display
■ Front Panel
Shuttle ring 18
STANDBY/ON button 16
ENTER button 17 , 30 - 38
Jog dial 18
RETURN button 35 , 37 , 41
DVD display 9
POWER switch 16
Direction buttons
( y/u,a/s )
CINEMA SCAN
17 , 30 - 44
STANDBY/ ON
ENTER
RETURN
STANDBY
indicator
STANDBY
POWER
OFF
PHONER
16
OPEN/CLOSE
PHONER LEVEL
MIN
TITLE
MENU
PAUSE
STOP
PLAY
DIMMER
MAX
DVD / VIDEO CD / CD PLAYER
DV-S717
PLAY button 16
DIMMER button 9
MENU button 10
PHONES jack
12
STOP button 17
Disc tray 16
PAUSE button 17
TITLE button 20
Up/Down buttons 21
PHONES LEVEL knob 12
OPEN/CLOSE button 16
■ Rear Panel
Power cord
ANALOG
OUTPUT
VIDEO OUT
L
DIGITAL
OUTPUT
REMOTE
CONTROL
COAXIAL OPTICAL
R
Y
CB
CR
S VIDEO
VIDEO
Power plug 12
COMPONENT VIDEO OUT jacks
Y•CB•CR 13
S VIDEO OUT jack 12
VIDEO OUT jack 12 , 14 , 15
z REMOTE CONTROL jacks 8
DIGITAL OPTICAL AUDIO OUT terminal 14 , 15
DIGITAL COAXIAL AUDIO OUT jack 14 , 15
ANALOG AUDIO OUT (L/R) jacks 12 , 13
, 15
Connections for remote control ( z )
When connecting ONKYO products, it is necessary to attach the z cable to be able to use the remote controller of the main component to control the entire system.
1.To use this DVD player with an amplifier (or receiver), cassette tape deck and tuner with the z symbol, insert the remote control
cable plugs into the REMOTE CONTROL jacks.
2.As the exact connection sequence of the z cable is unimportant, you can connect from the amplifier (or receiver) to either the tuner,
the cassette tape deck or to the compact disc player.
3.If using an z equipped ONKYO amplifier (or receiver), to operate correctly, the remote control must face towards the remote control
sensor of the amplifier (or receiver).
Notes:
• The upper and lower z remote control jacks have the same function.
• Remote control operation is not possible when only the remote control cable is connected — the audio connection cables must also be connected.
• An z remote control cable equipped with a 1/8" (3.5mm) diameter miniature two-conductor phone plug is included with the DV-S717
and with every tuner, compact
player or cassette tape deck with the z symbol.
Downloaded From DvDPlayer-Manual.com
Onkyodisc
Manuals
Introduction
■ DVD Display
• Pressing of the DIMMER button changes
the brightness of the Display.
Dimmed
Off
Connections
Normal
Repeat playback mode indicators 22
RANDOM indicator 25
Operating status indicator
Title number indicator
PBC indicator
MEMORY indicator 24
RANDOM
MEMORY
VCD
TITLE
CHP/TR
TOTAL
REMAIN
PBC
REPEAT
A - B ALL
DVD
VCD/Audio CD indicator
DVD indicator
Angle icon indicator 28
Chapter/track number indicator
Total playing time/remaining time/PBC/elapsed time indicators
■ The indicators vary depending on the kinds of discs you play.
■ DVD Video disc
■ VIDEO CD
■ Audio CD
• When closing the disc tray:
• When closing the disc tray:
• When closing the disc tray:
Example
RANDOM
MEMORY
VCD
Example
TITLE
CHP/TR
TOTAL
REMAIN
PBC
RANDOM
MEMORY
VCD
REPEAT
A - B ALL
DVD
CHP/TR
TOTAL
REMAIN
RANDOM
MEMORY
VCD
PBC
REPEAT
A - B ALL
• During playback:
Total number of
tracks
CHP/TR
REMAIN
PBC
REPEAT
A - B ALL
RANDOM
MEMORY
VCD
Playing chapter 3
in title 2
Elapsed time of
the current title
Some DVD video discs may not display the
chapter numbers or elapsed time.
REMAIN
PBC
Total playing time of
the disc
Example
TITLE
CHP/TR
REMAIN
PBC
REPEAT
A - B ALL
DVD
DVD
TOTAL
• During playback:
Example
Example
CHP/TR
REPEAT
A - B ALL
Total playing
Total number of
time of the disc
tracks
Lights up when using a PBC-controllable
VIDEO CD.
• During playback:
TITLE
TITLE
DVD
DVD
Total number of titles
RANDOM
MEMORY
VCD
Example
TITLE
RANDOM
MEMORY
VCD
TITLE
CHP/TR
REMAIN
PBC
REPEAT
A - B ALL
DVD
Playing track 6
Playing track 6
Elaplsed time of
the current track
Elaplsed time of
the current track
Some VIDEO CDs may not display the track
numbers or elapsed time.
■ Other indicators
When playing back the
REPEAT
same title, chapter or track
repeatedly.
23
When playback is paused.
17
RANDOM During random playback.
25
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
When playing back a specific
REPEAT
A-B
segment repeatedly. (A-B
repeat)
23
MEMORY During memory playback.
22
When playing back the
REPEAT
ALL
entire disc repeatedly.
23
When the camera angle can
be changed. 28
Identification of Controls (continued)
The instructions in this manual describe the controls on the remote controller. See the page in
for details.
Remote Controller
SET UP button 32
DISPLAY button 31
POWER button 16
OPEN/CLOSE button 16
SUBTITLE ON/OFF button 30
AUDIO button 29
POWER
SET UP
DISPLAY
OPEN /
CLOSE
AUDIO
ANGLE
SUBTITLE
SUBTITLE
ON / OFF
ANGLE button 28
MENU
SUBTITLE button 30
MENU button* 20
Direction buttons
17 , 32 - 41
TITLE
ENTER
TITLE button 20
ENTER button 17 , 32 - 41
ZOOM
RETURN
ZOOM button 27
RETURN button 35
DISC MEMORY
1
2
DISC MEMORY button 22
3
CLEAR
4
5
6
7
8
9
Number buttons 20
CLEAR button 23
3D DNR
SEARCH
3D DNR button 26
DIMMER
SEARCH button 20
+10
0
FR (fast reverse) button 18
FR
PLAY
FF
PAUSE
DOWN
STOP
UP
S LOW
REPEAT
A-B
MEMORY
RANDOM
PLAY button 18
DIMMER button 9
DOWN button 21
STOP button 17
PAUSE button 17
FF (fast forward) button 18
SLOW button 19
UP button 21
REPEAT button 23
RANDOM button 25
A-B button 23
MEMORY button 24
REMOTE CONTROLLER RC-388 DV
∗ MENU button
Use the MENU button to display
the menu screen included on
DVD video discs. To operate a
menu screen, follow the
instructions in “Locating a Title
Using the Title Menu” 20 .
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
1
Open the cover.
This section shows you how to use the remote controller.
Point the remote controller at the
remote sensor and press the
buttons.
30°
30°
Within about 5 m (16-11/16 feet)
2
Insert batteries (AA size).
Make sure to match the + and – on the
batteries to the marks inside the battery
compartment.
3
Close the cover.
Distance: About 5 m(16-11/16 feet) from
the front of the remote sensor
Angle:
About 30° in each direction of
the front of the remote sensor
* Do not expose the remote sensor of the
DVD player to a strong light source such
as direct sunlight or illumination. If you do
so, you may not be able to operate the
DVD player with the remote controller.
Notes on the remote controller:
Notes on batteries:
Improper use of batteries may cause battery leakage and corrosion. To
operate the remote controller correctly, follow the instructions below.
• Do not insert the batteries into the remote controller in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries. Do not
throw the batteries into a fire.
• Do not leave dead or exhausted batteries in the remote controller.
• Do not use different types of batteries together, or mix old and new
batteries.
• If you do not use the remote controller for a long period of time,
remove the batteries to avoid possible damage from battery
corrosion.
• If the remote controller does not function correctly or if the operating
range becomes reduced, replace all batteries with new ones.
• If battery leakage occurs, wipe the battery liquid from the battery
compartment, then insert new batteries.
• The batteries should last about one year with normal use.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
• Direct the remote controller at the remote sensor of the DVD player.
• Do not drop or give the remote controller a shock.
• Do not leave the remote controller near an extremely hot or humid
place.
• Do not spill water or put anything wet on the remote controller.
• Do not open the remote controller.
Introduction
Insert the batteries into the remote controller so you can use it
to operate the DVD player.
Operating with the Remote Controller
Connections
Preparing the Remote Controller
Connecting to a TV
For details of Output sound, see 29 .
Connect the DVD player to your TV.
Connecting to a TV
■ Setting of the output sound type
From the on-screen displays, set the “Audio Out Select” to “Analog 2ch”. 38
To wall outlet
Power plug
ANALOG
OUTPUT
VIDEO OUT
DIGITAL
OUTPUT
REMOTE
CONTROL
COAXIAL OPTICAL
L
R
Y
CB
CR
To S VIDEO OUT
S VIDEO
VIDEO
(yellow)
To
VIDEO
OUT
(white)
To ANALOG AUDIO OUT
(red)
Audio·video cable (supplied)
To audio inputs
(red)
(white)
(yellow)
To video input
Signal flow
S video cable (supplied)
To S video input
If the TV has an S video input, connect the
DVD player with the supplied S video cable.
TV or monitor with
audio video inputs
Notes:
• Refer to the instruction manual of the connected TV and how to activate TV input as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
• If your television set has one audio input, connect the DVD player to a Y cable adapter (not supplied) and then connect to your TV.
• Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback
picture may be distorted as DVD discs are copy protected.
Connecting headphones
Connect headphones to the PHONES jack on the front panel using a
stereo plug.
Before connecting, temporarily turn down the volume with the PHONES
LEVEL volume. Readjust to your preference when playback begins.
C
SYSTEM
PHONES LEVEL
STANDBY
POWER
OPEN
PHONES
PHONES LEVEL
TITLE
MIN
MENU
DIMMER
MAX
MIN
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
MAX
Connecting to an Audio System or TV with
COMPONENT VIDEO Inputs
For details of Output sound, see 29 .
■ Setting of the output sound type
From the on-screen displays, set the “Audio Out Select” to “Analog 2ch”. 38
To wall outlet
Power plug
ANALOG
OUTPUT
VIDEO OUT
L
DIGITAL
OUTPUT
REMOTE
CONTROL
COAXIAL OPTICAL
R
Y
To Y
VIDEO
OUT
CB
CR
S VIDEO
To CB
VIDEO
OUT
VIDEO
To CR
VIDEO
OUT
To ANALOG AUDIO OUT
(white) (red)
Signal flow
To audio inputs
of the amplifier
(red)
(white)
Audio system
To CR video input
To CB video input
To Y video input
TV or monitor with
component signal inputs
COMPONENT VIDEO OUT (COLOR DIFFERENCE):
Some TVs or monitors are equipped with color difference inputs. Connecting to these inputs allows you to enjoy higher quality picture
playback.
Actual labels for color difference inputs may vary depending on the TV manufacturer. (ex. Y, B-Y, R-Y etc.)
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust
the TV or monitor for optimum performance.
Notes:
• Refer to the instruction manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD player away
from the tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level.
Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers
may be damaged.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Connections
Connecting to an Audio System and TV with COMPONENT VIDEO Inputs
Introduction
You can listen to the sound of audio CDs and DVD video discs in stereo and enjoy the enhanced picture quality of
DVD video discs on a TV with COMPONENT VIDEO inputs.
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.
For connection to your TV, see pages 12 and 13.
Select the connection type depending on your audio equipment.
When connecting the optical digital cable, remove the cap and fit the connector into the jack firmly. When not using
the jack, keep it capped to protect it from dust intrusion.
Connecting to an Amplifier Equipped With a Dolby Digital Decoder
Dolby Digital
ANALOG
OUTPUT
VIDEO OUT
DIGITAL
OUTPUT
REMOTE
CONTROL
COAXIAL OPTICAL
L
R
Y
CB
CR
S VIDEO
VIDEO
75 Ω
coaxial
cable
Signal flow
Optical digital cable
Connection
example
To OPTICAL type digital audio
input
To COAXIAL type
digital audio input
Amplifier equipped with
a Dolby Digital decoder
Front
speaker
(left)
Front
speaker
(right)
TV
Sub
woofer
Dolby Digital is the surround sound technology used in theaters
showing the latest movies, and is now available to reproduce
this realistic effect in the home. You can enjoy motion picture
and live concert DVD video discs with this dynamic realistic sound
by connecting the DVD player to a 6 channel amplifier equipped
with a Dolby Digital decoder or Dolby Digital processor. If you
have a Dolby Pro Logic Surround decoder, you will obtain the
full benefit of Pro Logic from the same DVD movies that provide
full 5.1-channel Dolby Digital soundtracks, as well as from titles
with the Dolby Surround mark.
• Use DVD video discs encoded via the Dolby Digital
recording system.
• Make the following setting
Setting
Select:
Page
Audio Out Select
Bitstream
38
Recording system
j
29
Center speaker
Rear speaker
(right surround)
Rear speaker
(left surround)
Connecting to an Amplifier Equipped With a Dolby Pro Logic Surround
Dolby Pro Logic Surround
ANALOG
OUTPUT
VIDEO OUT
L
DIGITAL
OUTPUT
You can enjoy the dynamic realistic sound of Dolby Pro Logic
Surround by connecting an amplifier and
speaker system (right and left front speakers, a center speaker,
and one or two rear speakers).
REMOTE
CONTROL
COAXIAL OPTICAL
R
Y
Signal flow
CB
CR
S VIDEO
VIDEO
Audio cable
Connection
example
To audio input
Amplifier equipped with
Dolby Pro Logic surround
• With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in
“Connecting to an Amplifier equipped with a Dolby Digital
Decoder.” Refer to that amplifier’s owner’s manual and set the
amplifier so you can enjoy Dolby Pro Logic Surround sound.
• With an amplifier not equipped with Dolby Digital
Front
speaker
(left)
Front
speaker
(right)
TV
Connect the equipment as follows.
• Make the following setting
Setting
Select:
Page
Audio Out Select
Analog 2ch
38
Center speaker
Rear speaker
Connect one or two rear speakers.
The output sound from the rear speakers will be monaural even if you connect two
rear speakers.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Note:
• Be sure to set "Audio Out Select" to "Analog 2ch" when you enjoy
sounds of Dolby Pro Logic Surround using this connection.
Connecting to an Amplifier Equipped With a DTS Decoder
ANALOG
OUTPUT
VIDEO OUT
DIGITAL
OUTPUT
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and
now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full
benefit or 5.1 channel DTS encoded sound tracks on DVD video
discs or audio CDs.
REMOTE
CONTROL
COAXIAL OPTICAL
L
R
Y
CB
CR
S VIDEO
VIDEO
75 Ω
coaxial
cable
Signal flow
Optical digital cable
Connection
example
To OPTICAL type digital audio
input
To COAXIAL type
digital audio input
Amplifier equipped with a
DTS decoder
Front
speaker
(left)
Front
speaker
(right)
TV
• Use DVD video discs or audio CDs encoded via the
DTS recording system.
• Make the following setting
Setting
Select:
Page
Audio Out Select
Bitstream
38
Recording system
DTS
29
Sub
woofer
Center speaker
Rear speaker
(right surround)
Rear speaker
(left surround)
Connecting to an Amplifier Equipped With a Digital Audio Input
ANALOG
OUTPUT
VIDEO OUT
L
DIGITAL
OUTPUT
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo
by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
REMOTE
CONTROL
COAXIAL OPTICAL
R
Y
CB
CR
S VIDEO
VIDEO
75 Ω
coaxial
cable
Signal flow
• Make the following setting
Optical digital cable
Connection
example
To OPTICAL type digital audio
input
To COAXIAL type
digital audio input
Amplifier equipped with a
Digital Audio Input
Front
speaker
(left)
TV
Setting
Select:
Page
Audio Out Select
PCM
38
Front
speaker
(right)
Notes:
• DO NOT connect the DIGITAL OUTPUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This input on you’re A/V Receiver
is reserved for Laserdisc use only and is incompatible with the DIGITAL OUTPUT jack of the DVD player.
• Connect the DIGITAL OUTPUT jack of the DVD player to the “DIGITAL” or “COAXIAL” input of a Receiver or Processor.
• Refer to the Instruction manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.
The output
sound of the DVD player
has a
wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,
Downloaded• From
DvDPlayer-Manual.com
Onkyo
Manuals
the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
Connections
• Do not set “Audio Out Select to “Bitstream” from the menu 32 38 unless you are connecting (via the DIGITAL OUTPUT jack) an AV
decoder that has the Dolby Digital or Digital Theater System (DTS) decoding function. High volume sound may damage your hearing as well
as the speakers.
• When playing DTS-encoded discs (DVD videodisc and audio CDs), excessive noise may be exhibited from the analog stereo jacks. To avoid
possible damage to the audio system, you should take proper precautions when the ANALOG OUTPUT jacks of the DVD player is connected
to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must
be connected to the DIGITAL OUTPUT jack of the DVD player.
Introduction
Warning
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to may cause serious personal injury.
Playing a Disc
STANDBY/ON button
DVD display
POWER switch
CINEMA SCAN
STANDBY/ON
ENTER
RETURN
STANDBY
POWER
OPEN /CLOSE
OFF
PHONES
PHONES LEVEL
MIN
TITLE
PAUSE
STOP
DVD / VIDEO CD / CD PLAYER
This section shows you the basics on how to play
back a disc.
PLAY
DIMMER
MENU
MAX
STANDBY indicator
3
2
DV-S717
4
STOP
PAUSE
Up/Down
Basic Playback
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD
player.
• For connection details, see "Connections". 12 – 15
1
Note:
Connecting the power supply.
You cannot use the remote controller if the
POWER button on the DVD player is set to
OFF.
POWER
1. Plug the power cord into an AC wall outlet.
2. Press the POWER switch.
The STANDBY indicator on the player illuminates.
STANDBY/ON
3. Press the STANDBY/ON button or POWER button on the
remote controller to turn on the DVD player. The display lights
up and the STANDBY indicator goes off.
2
OPEN /
CLOSE
Press OPEN/CLOSE.
Note:
You can open the disc tray by pressing this
button even if the DVD player is turned off.
The disc tray opens.
3
Place the disc on the
disc tray.
Notes:
CINEMA
SCAN
ENTER
RETURN
STOP
PAUSE
OPEN
/CLOSE
DVD
With the playback side down
4
PLAY
Press PLAY.
If you insert a DVD video disc that contains a title menu, or insert
a PBC (Playback Control)-equipped VIDEO CD, a menu screen
may appear. See “To start playback from the menu screen” 17 .
To start playback of a PBC-equipped VIDEO CD from the menu
screen, set “PBC” to “ON” via the on-screen displays. 32 44
First Setup screen
ONKYO
Thank you for your purchase of
our DVD-Video Player.
Please make a selection for
On-Screen Language and your TV shape
and press ENTER button on your remote control.
FIRST SETUP
ENG
On-Screen Language
4:3LB
TV Shape
On-screen Language: Select the
appropriate on-screen language.
TV Shape: Select a picture size
according to the aspect ratio of
Downloaded From
yourDvDPlayer-Manual.com
TV (See 36 for details.) Onkyo Manuals
• There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
• Do not place anything except DVD video discs
or audio CDs on the disc tray.
Note:
The disc tray closes and playback starts.
The First Setup screen appears
only once when the DVD player
is turned on for the first time.
From this screen, make the
following settings.
PLAYER
To select the items
on the screen.
ENTER
After selecting an
items, press this.
• For PBC (Playback Control) of VIDEO CDs,
see “On VIDEO CD” 47 .
• You may need to press the TITLE or MENU
button to display the menu screen depending
on the DVD video discs.
1. Press the /
buttons to select “On-Screen Language,” and press
the ENTER button.
2. Select a language using the / buttons, and press the ENTER button.
3. Press the
button to select “TV Shape,” and press the ENTER button.
4. Select a picture size (see 36 ) using the /
buttons, and press
the ENTER button.
5. Finally press the SETUP button.
All your selections are entered and the First Setup screen disappears.
To change your settings, see “Customizing the Function Settings.” 32
1
2
/
/
MENU
TITLE
1
2
3
4
5
6
7
8
9
+10
0
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a
normal broadcast may appear on the TV screen while playing a
DVD video disc because the high resolution pictures on these
discs include a lot of information. While the amount of noise
depends on the TV you use with this DVD player, you should
generally reduce the sharpness adjustment on your TV when
viewing DVD video discs.
/
ENTER
4
About DVD VCD CD
The DVD VCD CD icons on the heading bar show the playable
discs for the function described under that heading.
PAUSE
STOP
DVD
: You can use this function with DVD video discs
VCD
: You can use this function with VIDEO CDs
CD
: You can use this function with audio CDs
REMOTE CONTROLLER
DVD
TITLE 1
TITLE 2
TITLE 3
TITLE 4
STOP
To remove the disc
OPEN /
CLOSE
ENTER
2 Press ENTER.
The DVD player starts playback from
the selected title.
• When not using the menu screen of
a PBC-controllable VIDEO CD, set
“PBC” to “Off” via the on-screen
displays. 32 44
Press OPEN/CLOSE.
CINEMA
SCAN
ENTER
RETURN
STO
PAUSE
OPEN
/CLOSE
DVD PLA
Remove the disc after the disc tray
opens completely.
To pause playback (still mode)
PAUSE
Press STOP.
Basic Playback
1 Press /
/ /
or the number
buttons to select the title you want.
e.g.
CD
To stop playback
To start playback from the menu screen
ENTER
VCD
Press PAUSE during playback.
To resume normal playback, press the
PLAY button.
• The sound is muted during still mode.
• Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
Notes:
• Do not move the DVD player during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button on the remote controller or DVD player to open and close the disc tray. Do not push the disc tray
while it is moving. Doing so may cause the DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD player to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu
may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the STOP button on
your remote controller once the movie is completed.
• If you pause a picture and leave it still for a long while, the screen saver of the DVD player automatically appears (when “Screen
Saver” is set to “On” 41 ). To turn off the screen saver, press the PLAY button.
About This Instruction Manual
This Instruction manual explains the basic instructions of this DVD player. Some DVD video discs are produced in a manner that
allows specific or limited operation during playback. As such, the DVD player may not respond to all operating commands. This is
not a defect in the DVD player. Refer to the instruction notes of discs.
“
” may appear on the TV screen during operation. A “
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
” means that the operation is not permitted by the DVD player or the disc.
Playing a Disc (continued)
Shuttle Ring
Jog Dial
2
8
30
3
1
2
4
5
6
7
8
9
+10
0
PLAY
PAUSE
Fast reverse
Fast forward
SlowMotion
FF
Last
Play
FR
REMOTE CONTROLLER
You can play back discs at various speeds, and resume playback from the
location where you stopped playback.
DVD
VCD
DVD
CD
Using the Shuttle Ring
You can play back a disc at ×2, ×8 or ×30 the normal speed.
Turn the shuttle ring during playback.
Slow
Fast
Reverse
Fast
Forward
CD
Fast Reverse Playback, Fast Forward Playback
You can play discs at various speeds by turning the shuttle ring.
Slow
VCD
The playback speed
can be controlled by
the extent of the wheel
rotation.
Press FR or FF during playback.
FR
FF
To resume normal playback
• DVD video disc
The playback speed becomes x2 the
normal speed.
Each time you press the FR or FF button,
the playback speed changes.
FR:
FF:
Release the shuttle ring.
Notes:
TV screen
• The playback speed may differ depending on the disc.
• If you slow down the playback speed of a DVD video disc by turning the ring
leftward, the DVD player performs reverse frame playback. The reverse
frame playback may advance more rapidly than in the forward direction.
DVD
Fast reverse playback
Fast forward playback
×2
×2 the
normal speed
VCD
Using the Jog Dial
×8
× 30
×8 the
normal speed
×30 the
normal speed
• VIDEO CD/Audio CD
The fast reverse or fast forward playback
alternates between two speeds.
You can advance or reverse a picture frame by frame from the jog dial.
Turn the jog dial.
TV screen
"Jog On" appears when "On-Screen
Display" is set to "On." 32 40
Jog On
FR
FF
a FR1
a FR2
Fast reverse
playback
FF1 s
FF2 s
Fast forward
playback
Prolonged absence of operation may
automatically cancel this function.
Rightward: To advance the
picture frame by frame.
Leftward: To reverse the picture
frame by frame. (Only
when using a DVD disc.)
To resume normal playback
PLAY
Press PLAY.
Notes:
• The sound is muted during frame by frame playback.
• The
reverse frame playback may
advance
more rapidly than in the
Downloaded From
DvDPlayer-Manual.com
Onkyo
Manuals
forward direction.
To resume normal playback
PLAY
Press PLAY.
Notes:
• The DVD player does not play back sound and subtitles during scan
reverse and forward of DVD video discs. However, the DVD player
plays back sound during fast forward or fast reverse playback of
audio CDs.
• The ×2, ×8 and ×30 speeds are only approximate speeds. These
speeds may vary slightly from disc to disc.
3
1
2
3
1
2
4
5
6
4
5
6
7
8
9
7
8
9
+10
0
0
2
1
SLOW
REMOTE CONTROLLER
REMOTE CONTROLLER
DVD
Playing in Slow-Motion
VCD
CD
Resuming Playback from the Same Location
You can play a disc in slow-motion.
Press SLOW
DVD
VCD
You can stop playback and resume playback later from the
same location on the disc.
1
during playback.
S LOW
Press STOP e at the location where
you want to interrupt playback.
STOP
Each time you press the SLOW button, the
slow-motion speed changes.
• The DVD player memorizes the location
where playback is stopped.
TV screen
1/2
1/2 the
normal speed
1/4
1/4 the
normal speed
To resume normal playback
1/8
2
Press PLAY.
PLAY
The DVD player resumes playback from
the location where you stopped playback.
1/8 the
normal speed
To start playback from the beginning regardless
of the location where you stopped playback.
1. Press STOP twice.
PLAY
Press PLAY.
STOP
The DVD player’s memory is cleared.
Note:
2. Press PLAY.
PLAY
The sound is muted during slow-motion playback.
If you are using a DVD video disc, playback
starts form the beginning of the current title.
If you are using a VIDEO CD/audio CD,
playback starts from the beginning of the disc.
• If you want to return to the beginning of a
DVD video disc, open and close the disc
tray once with the OPEN/CLOSE button
before pressing the PLAY button.
Notes:
• The DVD player’s memory is also cleared when:
– you unplug the DVD player from the wall outlet after you stop
playback.
– you open the disc tray.
– You adjust/change parental lock 42 or select a disc menu
language setting 34 .
• There may be a difference of the location where playback resumes
depending on the disc.
• Settings you changed using the menu screens while the DVD player
keeps a location in the memory may function only after the memory
is cleared.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Basic Playback
+10
PLAY
Locating a Specific Title, Chapter, or Track
DVD video disc
Title 1
Chapter 1
Chapter 2
Title 2
VIDEO CD/ Audio CD
Chapter 1 Chapter 2 Chapter 3
Track 2
Track 1
Track 3
Track 4
Track 5
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio
CDs are divided into tracks. You can quickly locate any specific title, chapter, or track.
DVD
Locating a Title Using the Title Menu
DVD
Locating a Title
If a DVD video disc contains a title menu, you can locate a
specific title using the title menu function.
If a DVD video disc contains title numbers, you can locate a
specific title by directly selecting a title number.
1
1
TITLE
Press TITLE.
Press SEARCH.
SEARCH
The title menu appears on the TV screen.
Make sure that the space next to Title is
highlighted.
e.g.
Example of a title menu
TITLE 1
TITLE 2
TITLE 3
TITLE 4
1
T i t l e:
Chapter :
2
1
2
3
4
5
6
7
8
9
+10
0
Press the corresponding number
buttons for the title you want.
e.g. To select title 2
T i t l e:
2
Chapter :
2
2
ENTER
Press /
you want.
/
/
1
to select the title
To select title 12
If the titles in the title menu are assigned a
number, you can directly locate a specific
title by pressing its assigned number with
the number buttons.
1
3
3
1
PLAY
2
T i t l e: 12
Chapter :
1
Press PLAY.
The DVD player starts playback from
chapter 1 of the selected title.
Press ENTER.
ENTER
The DVD player starts playback from
chapter 1 of the selected title.
Notes:
• The instructions above describe basic procedures which may vary
depending on the contents of the DVD video disc. If different
instructions appear on the TV screen, follow those instructions.
• If you display the title menu during playback and press the TITLE
button again without selecting any title, the DVD player resumes
playback from the point where you first pressed the TITLE button.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Notes:
• You can shift the highlight space between Title and Chapter by
pressing the /
buttons.
• Pressing the CLEAR button resets the Title and Chapter numbers.
To clear the Title , Chapter display, press the SEARCH button
several times.
• You can select a preferred language for on-screen displays.
32 , 34
/
/
/
ENTER
TITLE
Number buttons
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
SEARCH
PLAY
UP
DOWN
REMOTE CONTROLLER
VCD
Locating a Specific Chapter or Track Directly
If you know the chapter or track number you want to play, you
can locate it directly.
1
UP
e.g. DVD video disc
2
3
2
1
3
4
5
6
7
8
9
+10
0
1
T i t l e:
Chapter :
Press Down
or Up
repeatedly to display the chapter or
track number you want.
The DVD player starts playback from the
selected chapter or track.
1
: To locate preceding chapters or
tracks
When you press the DOWN
button, the DVD player starts
playback from the beginning of the
current chapter or track.
When you press the DOWN
button twice, the DVD player starts
playback from the beginning of the
preceding chapter or track.
Press
to highlight the space
next to Chapter.
e.g. DVD video disc
CD
You can locate consecutive chapters or tracks.
Skip steps 1 and 2 if you are using an
VIDEO CD/audio CD.
1
T i t l e:
Chapter :
VCD
Locating a Specific Chapter or Track
DOWN
Press SEARCH.
SEARCH
DVD
CD
1
Press the corresponding number
buttons of the chapter or track you
want.
: To locate succeeding chapters or
tracks
You can use the +10 button to select
numbers from 10 through 99.
e.g. To select chapter or track 25
(VIDEO/
(DVD video disc) Audio CD)
4
•
2
5
•
+10
+10
Title:
1
25
Chapter :
Track : 2 5
5
Notes:
Press PLAY.
PLAY
The DVD player starts playback from the
selected chapter or track.
To select a title and chapter number at the same time
e.g. To select chapter 25 in title 2
SEARCH
PLAY
2
2
Title number
5
Chapter number
T i t l e:
2
25
Chapter :
Note:
Pressing the CLEAR button resets the Title and Chapter numbers. To
clear the Title, Chapter display, press the SEARCH button several
times.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
• Some titles may not display chapter numbers.
• When you set “Title Stop” to “Off” 44 , you can access to locate
chapters in another title. If you go back to the preceding title by
pressing the DOWN q button, the DVD player locates the first
chapter of the title. When "Title Stop" is set to "On", you can access
chapters only within the current title.
Basic Playback
DVD
Playing From the Desired
Location
DISC MEMORY
3
1
2
4
5
6
7
8
9
+10
0
NUMBER
SEARCH
PLAY
REMOTE CONTROLLER
You can play a disc from the desired location.
DVD
Storing Locations in the Memory
The DVD player memorizes a location of a disc, so that you
can start playback from there later.
DISC MEMORY
Press DISC MEMORY at the
location where you want to start
playback later.
DVD
VCD
CD
Locating a Specific Location by Entering the Time
You can locate a specific location by entering its
corresponding time (hours, minutes, seconds).
1
Press SEARCH twice.
SEARCH
You may have to press further depending
on the disc. Press the button repeatedly
until the following
The DVD player memorizes the location.
indication appears.
D i s c Memo r y Se t
TIME –:––:––
The DISC MEMORY button can be
pressed also while you are playing in slowmotion or the picture is
pausing.
2
1
2
3
4
5
6
7
8
9
+10
0
Press the number buttons to enter
the time.
e.g.
1
2
5
3
0
To start playback from the location you stored.
TIME 1:25:30
DISC MEMORY
Insert the disc that contains the
location you stored, and press DISC
MEMORY during stop.
Some discs may be played automatically
after inserted. In such a case, first stop
playback by pressing the STOP button.
3
PLAY
Press PLAY.
The DVD player starts playback from the
desired location.
Notes:
• The DVD player memorizes only one location at each side of a DVD
video disc. It has the capability to memorize 3 different locations (eg. 3
single sided discs). Storing the fourth memory location erases the first.
• Storing a new location erases the old one of the disc.
• If you start playback of a DVD video disc equipped with the parental
lock feature, after changing the parental lock level 42 on the DVD
player, the display of the parental lock level may return to the
previous one. In this case, set the parental lock level back to it.
• Some discs or scenes (especially menu screens included on the
disc) may not permit this operation.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Notes:
• Some discs may not respond to this process.
• Some scenes may not be located precisely as you specified.
• This method for accessing specific locations is available only within
the current title of the DVD video disc or within the current track of
the VIDEO CD/audio CD.
Playing Repeatedly
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
PLAY
A-B
REPEAT
REMOTE CONTROLLER
You can play back a specific title, chapter, track, or segment repeatedly.
(Title repeat, chapter/track repeat, A-B repeat)
DVD
VCD
DVD
CD
Repeating a Title, Chapter, or Track
You can play back a specific segment repeatedly.
(A-B repeat)
1
1
2
REPEAT
CD
Repeating a Specific Segment
You can play back the same title, chapter, or track repeatedly.
(Title, chapter/track repeat)
Select the title, chapter, or track you
want to repeat.
20 , 21
VCD
A-B
Press REPEAT.
Press A-B at the beginning of the
segment (point A) you want to play
repeatedly.
A–
Each time you press the REPEAT button,
the repeat mode changes as follows.
• DVD video disc
Repeats the
same chapter.
Title Repeat
Repeats the
same title.
Repeat Off
Resumes normal
playback.
2
A-B
Press A-B again at the end of the
segment (point B).
A–B
The DVD player automatically returns to
point A and starts repeat playback of the
selected segment (A-B).
• VIDEO CD / Audio CD
Track Repeat
All Repeat
Repeat Off
Repeats the
same track.
Repeats the
entire disc.
Resumes normal
playback.
To resume normal playback
CLEAR
Press CLEAR.
Note:
Some discs may not permit repeat operation.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
To resume normal playback
CLEAR
Press CLEAR.
Notes:
• Some discs may not permit A-B repeat operation.
• You can specify a segment only within the current title.
• You cannot set the A-B repeat function for segment that include
multiple camera angles.
• There may be a slight difference between point A and the location
where playback actually resumes depending on the discs.
Advanced Playback
Chapter Repeat
Playing in a Favorite Order
Title : 2
Chapter : 25
Title : 2
Chapter : 12
/
Title : 1
Chapter : 1
2
2
3
1
2
4
5
6
7
8
9
+10
0
/
CLEAR
3
1
You can combine your favorite titles, chapters, or tracks and play them in
any order. You can program up to 28 items into the memory. (Memory
playback)
REMOTE CONTROLLER
DVD
VCD
CD
Setting Titles, Chapters, or Tracks in a Favorite Order
The DVD player automatically plays back titles, chapters, or tracks in the order you program.
1
Insert a disc and press MEMORY
during stop.
MEMORY
MEMORY
The following menu appears.
1
2
3
4
5
6
7
MEMORY
1
2
3
4
5
6
7
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
8
9
10
11
12
13
14
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
15
16
17
18
19
20
21
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
22
23
24
25
26
27
28
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
2
1
3
4
5
6
7
8
9
+10
0
ENTER
3
Select the items in the order you
want by pressing the number
buttons, then ENTER for each item.
Each time you press the
/
button, the
-- indication next to T and C is highlighted in
turn. Highlight where you want to enter, then
press the number buttons.
e.g. To play back chapter 25 in title 2, chapter
12 in title 2, all the chapters in title 1, and
chapter 2 in title 4.
Title number Chapter number
PLAY
2
2
1
2
1
2
ENTER
1
Memory 4
4
C
––
––
––
––
––
––
––
15
16
17
18
19
20
21
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
22
23
24
25
26
27
28
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
Press PLAY while the MEMORY
menu appears on the TV screen.
While the MEMORY menu appears on the TV screen,
press
/ to move the highlighted bar to the item
you want to change.
Change the selection following the instructions in step 2.
To cancel the programmed selections
1
2
Memory 3
T
––
––
––
––
––
––
––
To change the programmed selections
5
ENTER
Memory 2
8
9
10
11
12
13
14
The DVD player starts memory playback.
ENTER
Memory 1
C
2S
12
––
02
––
––
––
To select another chapter in the same title,
you do not need to select the title number.
T: Title number
C: Chapter number
2
T
02
02
01
04
––
––
––
While the MEMORY menu appears on the TV screen,
press
/ to move the highlighted bar to the item
you want to cancel.
Press the CLEAR button.
To resume normal playback from memory
playback
CLEAR
Press CLEAR.
The MEMORY indicator disappears.
ENTER
2
To select tracks from a VIDEO CD/audio CD
in order, press the number buttons for the
track, then press the ENTER button for each
selection you want.
To program during playback
If you press the MEMORY button during playback, a menu
appears to accept your programming.
If you further press the DISPLAY button, you can display
the MEMORY menu also. Follow step 2 and 3.
Notes:
•
•
•
•
•
Some discs may not permit memory playback operation.
If you press the REPEAT button during memory playback, the DVD player repeats the current memory playback.
You cannot select title, chapter, and track numbers not included on the disc.
If you press the MEMORY or RETURN button while the MEMORY menu appears on the TV screen, the MEMORY menu disappears.
The programmed selections will be cleared when:
- you turn off the DVD player, or
- you remove the disc.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
/
Playing in Random Order
TITLE
Title
: 1: 1
CHAPTER
Chapter
: 3: 3
Title : 2
Chapter : 2
1
2
3
4
5
6
7
8
9
+10
0
Number buttons
CLEAR
SEARCH
PLAY
UP
RANDOM
Title : 3
Chapter : 1
REMOTE CONTROLLER
You can play back titles, chapters within a title, or tracks in random order.
(Random playback)
DVD
DVD
Playing Titles in Random Order
VCD
CD
Playing Chapters or Tracks in Random Order
The DVD player automatically selects the titles in a DVD video
disc and plays them randomly.
The DVD player automatically selects chapters within a title, or
tracks in a video CD/audio CD, and plays them randomly.
1
1
RANDOM
Press RANDOM twice during stop.
T i t l e Ran dom
2
1
Press the appropriate number
buttons for the title which contains
the chapters you want to play back
in random order.
3
4
5
6
7
8
9
+10
0
SEARCH
Skip this step if you are using VIDEO CD/
audio CD.
e.g. To play back the chapters in title 2 in
random order
(DVD video disc)
If you press the RANDOM button during
playback, the DVD player automatically
starts random playback after finishing the
current title.
SEARCH
2
Press RANDOM during stop.
RANDOM
(DVD video disc)
Cha p t e r Ra nd om
2
Ti t le: 2
Cha p t e r : 1
PLAY
(VIDEO CD/audio CD)
T r a c k Ra nd om
Tr ack : 1
If you press the RANDOM button during
playback, the DVD player automatically
starts random playback after finishing the
current chapter or track.
Press PLAY.
The DVD player starts random playback.
Press the PLAY button within about 5
seconds after you press the RANDOM
button.
1
3
Press PLAY.
PLAY
The DVD player starts random playback.
Press the PLAY button within about 5
seconds after you press the RANDOM
button.
To resume normal playback
CLEAR
To resume normal playback
CLEAR
Press CLEAR.
Press CLEAR.
Notes:
• Some discs may not permit random playback operation.
• You cannot use the random playback function in conjunction with the
memory playback function.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Notes:
• Some discs may not permit random playback operation.
• You cannot use the random playback function in conjunction with the
memory playback function.
• If you press the UP
button during random playback, the DVD
player goes to another chapter or track and starts random playback.
Advanced Playback
2
Ti t l e: 2
Ch a p t e r :
Selecting 3D DNR Picture
Enhancement
/
/
ZOOM
3D DNR
1
2
3
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
You can enhance picture quality during playback. (3D DNR)
DVD
VCD
Selecting 3D DNR On/Off
You can view a picture with less video noise.
Press 3D DNR during playback.
3D DNR
The current setting appears.
Each time you press the 3D DNR button,
the effect changes as follows.
3D DNR On
3D DNR Expanded
3D DNR Off
Normal level
effect
Expanded level
effect
Off
3D DNR: Three Dimension Digital Noise
Reduction
Notes:
• Actual picture enhancement may vary depending on the quality of
the disc.
• While the expanded level can provide additional improvement in the
reduction of noise in the video signal, it may produce undesirable
picture artifacts on some discs. Should this occur, select a more
appropriate 3D DNR level (off or normal).
• Depending on the disc, some kinds of picture details may be lost by
the picture enhancement.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
3D DNR
/
Zooming a Picture
/
RETURN
/
/
ZOOM
1
2
3
4
5
6
7
8
9
+10
0
CLEAR
REMOTE CONTROLLER
You can magnify areas within a picture.
DVD
Zooming a Picture
You can zoom in on a picture. You can shift the zoom point as well.
To resume normal playback
ZOOM
Press ZOOM during normal, slow or
still playback.
If you further press the ZOOM button
repeatedly, the magnification level increases.
ZOOM
Press ZOOM repeatedly so that "Zoom"
disappears.
Zoom 1
↓
Zoom 2
↓
Zoom 3
RETURN
ENTER
CLEAR
buttons, the
If you press the / / /
zoom point shifts.
When the zoom point reaches an edge of
the picture, the color of “Zoom” changes.
Pressing the CLEAR button restores the
zoom point to the center of the picture.
Notes:
•
•
•
•
Some discs may not respond to zoom feature.
During some scenes, the buttons may not work as described above.
Zooming does not work on subtitles or menu screens included on DVD video discs.
During zoom playback, the / / /
buttons cannot work one menu screens included on the DVD video discs. If you want to use the menu
screens, cancel the zoom playback.
• The magnification level varies depending on the picture size you select. 32
36
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Advanced Playback
To reduce the magnification level, press
the RETURN button.
Selecting the Camera Angle
Angle : 1
Angle : 2
1, 2
2
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
Angle : 3
REMOTE CONTROLLER
You can select a preferred camera angle to watch a scene.
DVD
Changing the Camera Angle
If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching.
1
ANGLE
Press ANGLE while playing a scene
recorded with multiple angles.
While playing a scene recorded with
multiple angles, the angle icon ( )
appears in the DVD display
and on the TV screen.
Press the ANGLE button while the angle
icon is displayed.
Angle: 1
Angle icon
To turn off the angle number indication
CLEAR
Press CLEAR.
To disable the angle icon display on the TV
From the on-screen displays, set “On-Screen Displays” to
“Off”. 32 40
Monitor the DVD display when you want to change the camera
angle.
Current angle
number
2
ANGLE
Press ANGLE or
while the angle
number appears on the TV screen.
Each time you press the ANGLE or
button, the camera angle changes.
ENTER
Angle: 1
Angle: 2
Angle: 3
: Cycles backwards
You can change the camera angle directly
by pressing the number buttons
corresponding to its angle number instead
of using the / buttons.
Notes:
• You can change the camera angle during still playback. The camera angle changes to the new setting when you resume normal playback.
• If you pause a picture immediately after changing the camera angle, the resumed playback picture may not use the new camera angle.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Selecting a Language
Good morning!
Bon jour!
1, 2
2
¡Buenos días!
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
REMOTE CONTROLLER
You can select a preferred language.
DVD
Selecting a Playback Audio Setting
You can select a preferred language and sound recording system from those included on the DVD video disc.
1
AUDIO
Press AUDIO during playback.
The current audio setting appears for
about 3 seconds.
Audio: 1 ENG PCM
2CH
About recording systems
This DVD player uses the Dolby Digital, DTS, and PCM
recording systems and cannot play back DVD video discs
recorded in any other recording system.
Dolby Digital 5.1 Channel is displayed as “ j 6CH.”
The abbreviation of the language appears
instead of the language name. Refer to the
list of languages and their abbreviations. 46
2
AUDIO
A VIDEO CD may have left and right sound channels and
contain sounds or languages on each. You can switch
these two channels to hear a preferred sound or language.
During playback, press AUDIO repeatedly to select the
sound cannel.
Each time you press the AUDIO or
button, the audio settings included on the
DVD video disc change.
e.g.
AUDIO
→
L. R
→
ENTER
Press AUDIO or
while the audio
setting appears on the TV screen.
Selecting sound channels of VIDEO CDs
L
AUDI O: 2 FRE
R
→
AUDI O: 1 ENG PCM 2CH
6CH
AUDI O: 3 SPA PCM 2CH
Both the left and right
channel are heard.
The left channel is heard.
The right channel is heard.
Notes:
• Some discs allow you to change audio selections only via the disc
menu. If this is the case, press the MENU button and choose the
appropriate language from the selections on the disc menu.
• When you turn on the DVD player or replace a disc, player returns to
the initial default setting. 35
• When you select a sound track which is not Included on the disc,
the DVD player plays a prior sound track programmed on the disc.
: Cycles backwards
To turn off the audio setting display
CLEAR
Press CLEAR.
Output sound conversion table (sampling frequency/quantization bit)
Audio s. on the setting screen 32
Discs
Sound recording system
Bitstream
ANALOG
DIGITAL
OUTPUT jack
OUTPUT jack
48 kHz/16 bit
Bitstream
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
–
Bitstream
Dolby Digital
48 kHz/16 bit
48 kHz/20 bit
Linear
DVD
48 kHz/24 bit
PCM
video discs
96 kHz/16 bit
96 kHz/20bit
96 kHz/24 bit
DTS
MPEG1
44.1Manuals
kHz/16 bit
DownloadedVIDEO
FromCDs
DvDPlayer-Manual.com
Onkyo
Audio CDs Linear PCM 44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
Analog 2ch Stereo Output
ANALOG
DIGITAL
OUTPUT jack
OUTPUT jack
48 kHz/16 bit
Bitstream
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/24 bit
–
96 kHz/16 bit
–
96 kHz/20 bit
–
96 kHz/24 bit
–
–
Bitstream
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
38
PCM
ANALOG
DIGITAL
OUTPUT jack
OUTPUT jack
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
–
–
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
Advanced Playback
Audio channel
Recording system
Language
Position number
SUBTITLE
SUBTITLE
ON/OFF
/
Selecting Subtitles
Good evening!
Bon soir!
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
¡Buenas tardes!
REMOTE CONTROLLER
You can display subtitles on the TV screen and select a preferred subtitle
language.
DVD
Selecting a Subtitle Language
Turning Subtitles On or Off
You can select whether to display subtitles or not.
SUBTITLE
ON / OFF
You can select a subtitle language from those included on the
DVD video disc.
Press SUBTITLE ON/OFF during
playback.
Subtitle:
1 ENG On
DVD
1
Press SUBTITLE during playback.
SUBTITLE
Current subtitle setting appears for about 3 seconds.
Subtitle: 1 ENG On
Appears for
about 3 seconds
Language
Position number
Good morning!
The abbreviation of the language appears
instead of the language name. Refer to the
list of languages and their abbreviations.
46
Subtitles
2
SUBTITLE
To turn off the subtitles
SUBTITLE
ON / OFF
ENTER
Press SUBTITLE ON/OFF.
1 ENG Of f
Each time you press the SUBTITLE or
button, the subtitle languages included on
the DVD video disc change.
e.g.
The subtitles disappear.
Subtitle:
Press SUBTITLE or
while the
subtitle setting appears on the TV
screen.
Subtitle : 1 ENG On
Appears for
about 3 seconds
Subtitle : 2 FRE On
Subtitle : 3 SPA On
: Cycles backwards
Notes:
• Some DVD video discs are set to display subtitles automatically, and
you cannot turn them off even if you set the subtitle function to off.
• During some scenes, the subtitles may not appear immediately after
you select “On.”
• Some DVD video discs will allow you to make subtitle selections and
turn subtitles on or off only via the disc menu.
To turn off the subtitle setting indication
CLEAR
Press CLEAR.
Notes:
• When you turn on the DVD player or replace a disc, player returns
to the initial default setting. 35
When you select a subtitle language which is not included on the disc,
the DVD player plays a prior language programmed on the disc.
• During some scenes, the subtitles may not appear immediately after
you change the subtitle language by pressing the
/
buttons.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Using the On-Screen Display
DISPLAY
3
1
2
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
You can view information about a disc and its operational status on the
TV screen.
DVD
VCD
CD
Checking the Operational Status
You can view the current title number, track number, and total
playing time of the disc on the TV screen.
Press DISPLAY during stop.
Each time you press the DISPLAY button, the
on-screen display changes as follows.
Current title number
Current chapter number
e.g.
Title : 2
Chapter :
Stop
Operational
status
1
↓
Turns off.
→
Track : 1
Checking the Remaining Time and Setting Status
You can view the elapsed time, remaining time, and setting
status of the disc on the TV screen.
DISPLAY
Press DISPLAY during playback.
Each time you press the DISPLAY button, the
on-screen display changes as follows.
Current title number
Current chapter number
Operational status
Playback mode
Elapsed time and
e.g.
remaining time of
the current title
Play
Elapsed time and
Elapsed Remain
remaining time of
Title : 3 0:10:15 0:50:45
the current chapter
Chapter : 2 0:03:08 0:10:24
Chapter Repeat
VIDEO CD/Audio CD
e.g.
CD
DVD video disc
DVD video disc
→
VCD
Current track number
Stop
Total 0:46:30
↓
Turns off.
→
Operational
status
Total playing
time of the disc
3D DNR : On
Audio : 1 ENG j 2CH
Subtitle : 12 ENG Off
Angle : 1
Current 3D DNR
setting
Current audio setting
Current subtitle setting
Current angle setting
The abbreviation of the language (e.g. ENG)
appears instead of the language name. Refer to
the list of languages and their abbreviations. 46
↓
Bit Rate: 0
10 6.0 Mbps
Data transfer rate (Mbit/s)
= Amount of picture, sound and subtitle data
in the DVD video disc transferred per second.
The larger the value is, the more data
processed, but this does not necessarily
insure better picture quality.
↓
Turns off.
VIDEO CD/Audio CD
Current track number
Playback mode
e.g.
→
Operational status
Elapsed time and
remaining time of
Play
the current track
Elapsed Remain
Elapsed time and
Track : 3 0:01:20 0:02:00
remaining time of
0:05:12 0:43:00
Disc
Track Repeat
the disc
3D DNR : On
↓
Turns off.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Current 3D DNR
setting (only when
using a VIDEO CD)
Advanced Playback
DISPLAY
DVD
1
Customizing the Function Settings
2
2
3
1
2
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
You can change the default settings to customize performance to your
preference.
Selecting a Setting Category
The setting menu asks you to select a setting category from LANGUAGE, PICTURE, AUDIO, DISPLAY and OPERATION, Each
selected category will provide you setting details.
1
SET UP
Press SET UP during stop.
The setting menu appears.
2
Press / to select the category,
then press ENTER.
ENTER
category
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
ENG
---
ENG
ENG
ENG
---
ENTER
Notes:
• The setting menu disappears when you press the SETUP button.
• The SETUP button can work even during normal playback, however
some operations may be inaccessible, and a message will appear.
In this case, try again after playing is stopped.
PICTURE
TV Shape 4:3LB
Black Level Nrml
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
Bitstream
On
Off
Off
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
OPERATION
Pause/Still
Parental Lock
Remote Confirmation
Title Stop
PBC
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Auto
Off
On
Off
On
On
Gray
Off
On
Setting
VCD
Details
Page
To select a preferred language for on-screen displays.
34
To select a preferred language for disc menus.
34
On-Screen Language
DVD
Disc menu Language
DVD
Audio Language
DVD
To select a preferred language for the sound track.
35
Subtitle Language
DVD
To select preferred language for subtitles.
35
TV Shape
Black Level
DVD
To select a picture size according to the aspect ratio of your TV
To select the black level of playback pictures.
36
37
VCD
DVD
VCD
Audio Out Select
DVD
VCD
Dynamic Range Control
DVD
Karaoke Vocal
Extended Audio Features
DVD
CD
CD
DVD
On-Screen Displays
DVD
VCD
CD
OSD Background Color
Extended Subtitle Features
Screen Saver
DVD
VCD
CD
Pause/Still
Parental Lock
Remote Confirmation
DVD
DVD
DVD
VCD
DVD
DVD
Title Stop
DVD
PBC
VCD
VCD
CD
CD
To select an output sound type according to your system
connection.
To turn on or off a function that makes faint sound easier to hear
even if you lower the volume during late hours playback.
To turn on or off the vocal output during KARAOKE disc playback.
To turn on or off special language for visually impaired
persons.
To turn on or off the operational status display (On-screen
display) on the TV screen.
To select the background color for on-screen displays.
To turn on or off special subtitles for hearing Impaired persons.
To turn on or off the screen saver.
To select the resolution of still pictures.
To turn on or off the parental lock function.
To turn on or off the confirmation beeper for Each remote
command received.
To turn on or off a feature that automatically stops playback
after a title has been viewed.
To use the menu screen when playing a PBC-controllable VIDEO CD.
38
39
39
39
40
40
40
41
42
42
44
44
44
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
(Continued)
Function Setup
DVD
Customizing the Function Settings (continued)
After you select LANGUAGE 32 , adjust to your preference.
LANGUAGE Setting
3
(Continued from page 32.)
ENTER
Press
/
to select the item, then press ENTER.
On-Screen Language
DVD
VCD
CD
ENTER
ENTER
ENTER
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
ENG
---
If you do not make any other settings,
proceed to step 4.
English
French
Spanish
Disc Menu Language
Select a preferred language by pressing
/ , and then press ENTER.
DVD
ENTER
Select a preferred language by pressing
/ , and then press ENTER.
ENTER
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
ENG
---
English
French
Spanish
Others
If you do not make any other settings,
proceed to step 4.
To select other languages:
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
PA
ENG
---
English
French
Spanish
Others
Code
P A
1) Select “Others” and press the ENTER
button.
2) Obtain the abbreviation of the preferred
language from the list 46 .
3) Select the first character by pressing the
/
buttons.
4) Press the
/
buttons to shift and select
the second character by pressing the /
buttons.
5) Press the ENTER button.
• Some DVD video discs may not include your pre-selected language. In this
case, the DVD player automatically displays disc menus consistent with the
disc’s initial language setting.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
4
3
1
RETURN
2
ENTER
RETURN
3
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
: If you press the RETURN button while a menu appears on the screen,
you will return to the previous menu screen displayed.
DVD
Audio Language
VCD
CD
DVD
ENTER
Select a preferred language by pressing
/ , and then press ENTER.
ENTER
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
ENG
---
If you do not adjust any other settings,
proceed to step 4.
English
French
Spanish
Others
To select other languages:
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
PA
---
English
French
Spanish
Others
Code
P A
1) Select “Others” and press the ENTER button.
2) Obtain the abbreviation of the preferred
language from the list 46 .
3) Select the first character by pressing the /
buttons.
4) Press the /
buttons to shift and select the
second character by pressing the / buttons.
5) Press the ENTER button.
• Some DVD video discs may be played in a different language than you selected.
A prior language programmed on the disc.
Subtitle Language
DVD
ENTER
Select a preferred language by pressing
/ , and then press ENTER.
ENTER
ENG
ENG
ENG
---
English
French
Spanish
No Subtitles
Others
If you do not make any other settings,
proceed to step 4.
To select other languages:
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
ENG
ENG
PA
English
French
Spanish
No Subtitles
Others
Code
P A
1) Select “Others” and press the ENTER button.
2) Obtain the abbreviation of the preferred
language from the list 46 .
3) Select the first character by pressing the /
buttons.
buttons to shift and select the
4) Press the /
second character by pressing the / buttons.
5) Press the ENTER button.
• If you select “No Subtitles” subtitles are not displayed.
• Some DVD video discs may be set to display subtitles in a different language
than you selected. A prior subtitle language programmed on the disc.
• Some DVD video discs allow you to change subtitle selections only via the disc
menu. If this is the case, press the MENU button and choose the appropriate
subtitle language from the selection on the disc menu.
4
SET UP
Press SETUP.
The setting menu disappears.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Function Setup
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
Customizing the Function Settings (continued)
After you select PICTURE 32 , adjust to your preference.
PICTURE Setting
3
(Continued from page 32.)
ENTER
Press
/
TV Shape
to select the item, then press ENTER.
DVD
4:3 LetterBox:
Select when a 4:3 TV is connected.
Displays theatrical images with masking
bars above and below the picture.
4:3 Normal:
Select when a 4:3 TV is connected.
Displays pictures cropped to fill your TV
screen. Either or both sides of the
picture are cut off.
ENTER
PICTURE
TV Shape 4:3LB
Black Level Nrml
4:3 LetterBox
4:3 Normal
16:9Widescreen
16:9 Widescreen: Select when a 16:9 wide TV is
connected.
ENTER
ENTER
Select your TV type by pressing
and then press ENTER.
/
,
If you do not make any other settings,
proceed to step 4.
• The displayable picture size is preset on the DVD video disc. Therefore, the
playback picture of some DVD video discs may not conform to the picture size
you select.
• When you play DVD video discs recorded in the 4:3 picture size only, the
playback picture always appears in the 4:3 picture size regardless of the TV
shape setting.
• If you select “16:9 Widescreen” and you own a 4:3 TV set, the DVD playback
picture will be horizontally distorted during playback. Images will appear to be
horizontally compressed. Always be sure that your TV shape conforms to the
actual TV in use.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
4
3
RETURN
1
2
3
4
5
6
7
8
9
+10
0
RETURN
REMOTE CONTROLLER
: If you press the RETURN button while a menu appears on the screen,
you will return to the previous menu screen displayed.
DVD
Black Level
DVD
VCD
VCD
Enhanced: Expanded black level.
Normal:
Standard black level.
PICTURE
TV Shape 4:3LB
Black Level Nrml
Enhanced
Normal
ENTER
Select the black level by pressing
and then press ENTER.
/
,
If you do not make any other settings,
proceed to step 4.
4
SET UP
Press SETUP.
Function Setup
The setting menu disappears.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Customizing the Function Settings (continued)
After you select AUDIO 32 , adjust to your preference.
DVD
VCD
CD
Audio Setting
3
(Continued from page 32.)
ENTER
Press
/
to select the item, then press ENTER.
Audio Out Select
DVD
VCD
CD
Select the output sound type according to your system connection.
ENTER
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
For details of sound recording systems, see 29 .
Bitstream
On
Off
Off
Bitstream
Analog 2ch
PCM
Bitstream:
Select when an amplifier equipped with a Dolby Digital or DTS decoder is
connected. 14 15 .
The DVD player outputs sounds in the bitstream format when you play a
DVD video disc recorded on the Dolby Digital or DTS recording system.
Analog 2ch:
Select when a TV or stereo system is connected via the analog audio
jacks. 12 13
PCM:
Select when a 2 channel digital stereo amplifier is connected. 15
The DVD player outputs sounds in the PCM 2ch (48 kHz/16 bit) format when
you play a DVD video disc recorded on the Dolby Digital or PCM recording
system.
ENTER
Select the output sound type by pressing
/ , and then press ENTER.
ENTER
If you do not make any other settings,
proceed to step 4.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Customizing the Function Settings
4
(continued)
3
RETURN
1
2
3
4
5
6
7
8
9
+10
0
RETURN
REMOTE CONTROLLER
: If you press the RETURN button while a menu appears on the screen,
you will return to the previous menu screen displayed.
DVD
Audio Setting (continued)
(Continued)
ENTER
Dynamic Range Control
DVD
On: Dynamic range is reduced.
Off: Full dynamic range is maintained.
ENTER
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
Bitstream
On
Off
Off
ENTER
Off
On
ENTER
Select "On" or "Off" by pressing
and then press ENTER.
/
,
If you do not make any other settings,
proceed to step 4.
• This function works only on playback of Dolby Digital recorded discs.
• The level of Dynamic Range Reduction may differ depending on the DVD
video disc.
DVD
Karaoke Vocal
On: The primary vocal is output when it is recorded on the disc.
Off: The primary vocal is not output.
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
Bitstream
On
Off
Off
ENTER
Off
On
ENTER
Select "On" or "Off" by pressing
and then press ENTER.
/
,
If you do not make any other settings,
proceed to step 4.
The vocal output feature is used during playback of Dolby Digital (multi-channel)
recorded DVD KARAOKE discs. This feature allows you to turn off vocal audio
tracks, or restore them for background accompaniment.
AUDIO
Audio Out Select
Dynamic Range Control
Karaoke Vocal
Extended Audio Feature
Bitstream
On
Off
Off
Off
On
DVD
On: Some DVD video discs contain special language track that describes the
actions on-screen for visually impaired persons. The DVD player
automatically plays this special feature.
Off: The DVD player does not play this special feature.
ENTER
ENTER
Select "On" or "Off" by pressing
and then press ENTER.
If you do not make any other settings,
proceed to step 4.
4
SET UP
Press SETUP.
The setting menu disappears.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
/
,
Function Setup
Extended Audio Features
Customizing the Function Settings (continued)
After you select DISPLAY 32 , adjust to your preference.
DISPLAY Setting
3
(Continued from page 32)
ENTER
Press
/
to select the item, then press ENTER.
ON-Screen Display
DVD
VCD
CD
On: Operational modes are displayed on-screen. (e.g. “PLAY”,
Off: Operational modes are not displayed.
ENTER
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
On
Gray
Off
On
Off
On
ENTER
ENTER
)
Select "On" or "Off" by pressing
and then press ENTER.
/
,
If you do not make any other settings,
proceed to step 4.
OSD Background Color
DVD
VCD
CD
Gray: Gray background.
Blue: Blue background.
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
On
Gray
Off
On
Blue
Gray
On
Gray
Off
On
Select the background color by pressing
/ , and then press ENTER.
If you do not make any other settings,
proceed to step 4.
Extended Subtitle Features
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
ENTER
ENTER
Off
On
DVD
On: Some DVD video discs contain special subtitles, an enhancement of
closed captioning for hearing impaired persons. The DVD player
automatically displays these special subtitles.
Off: The DVD player does not display these special subtitles.
ENTER
ENTER
Select "On" or "Off" by pressing
and then press ENTER.
If you do not make any other settings,
proceed to step 4.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
/
,
4
3
RETURN
1
2
3
4
5
6
7
8
9
+10
0
RETURN
REMOTE CONTROLLER
: If you press the RETURN button while a menu appears on the screen,
you will return to the previous menu screen displayed.
DVD
DVD
Screen Saver
VCD
CD
VCD
On: The screen saver works.
Off: The screen saver does not work.
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
On
Gray
Off
On
Off
On
ENTER
ENTER
Select "On" or "Off" by pressing
and then press ENTER.
/
,
If you do not make any other settings,
proceed to step 4.
4
SET UP
Press SETUP.
Function Setup
The setting menu disappears.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Customizing the Function Settings (continued)
After you select OPERATION 32 , adjust to your preference.
OPERATION Setting
3
(Continued from page 32.)
ENTER
Press
/
to select the item, then press ENTER.
DVD
Pause / Still
Auto: For normal use. Pictures can pause without shaking.
Frame: The resolution of still pictures is raised, so that you can make especially
a motionless picture more clearer when you pause it.
ENTER
OPERATION
Pause/Still
Parental Lock
Remote Confirmation
Title Stop
PBC
Auto
Off
On
Off
On
Auto
Frame
ENTER
ENTER
Select "Auto" or "Frame" by pressing
/ , and then press ENTER.
If you do not make any other settings,
proceed to step 4.
DVD
Parental Lock
Parental Lock
DVD video discs equipped with the parental lock function are rated according to their content. The contents
allowed by a parental lock level and the way a DVD video disc can be controlled may vary from disc to disc. For
example, if the disc allowed you could edit out violent scenes unsuitable for children and replace them with more
suitable scenes, or lock out playback of the disc altogether.
• DVD video discs may or may not respond to the parental lock settings. This Is not a defect in the DVD player.
Make sure this function works with your DVD video discs.
OPERATION
Pause/Still
Parental Lock
Remote Confirmation
Title Stop
PBC
Auto
Off
On
Off
On
Off
On
On: Select when you activate the parental lock feature or change the settings.
The next screen will appear for the detailed setting. 43
Off: The parental lock feature does not function.
ENTER
ENTER
Select "On" or "Off" by pressing
and then press ENTER.
/
,
Press the number buttons to create a
personal 4-digit security code, then press
ENTER.
OPERATION
Pause/Still
Parental Lock
Remote Confirmation
Title Stop
PBC
Auto
Off
On
Off
On
Off
On
If you make a mistake before pressing the
ENTER button, press the CLEAR button and
enter your 4-digit security code again.
Security Code
If you do not make any other settings,
proceed to step 4.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
3
1
2
3
4
5
6
7
8
9
+10
0
RETURN
CLEAR
Number buttons
STOP
RETURN
REMOTE CONTROLLER
: If you press the RETURN button while a menu appears on the screen,
you will return to the previous menu screen displayed.
DVD
When you select “On” 42 :
1) Press the
/
buttons to select the country whose standards were
used to rate the DVD video disc, then press the ENTER button.
Viewable
Level8
Level7
Level6
Level5
Level4
Level3
Level2
Level1
buttons to select the parental lock level, then press the
2) Press the /
ENTER button.
Locked
Viewable
Level8
Level7
Level6
Level5
Level4
Level3
Level2
Level1
You cannot play DVD video discs rated higher than the level you selected
unless you cancel the parental lock function. For example, when you
select level 7, discs rated higher than level 7 are locked out and cannot
be played.
The parental lock level is equivalent to the following USA movie ratings.
LEVEL 7: NC-17
LEVEL 6: R
LEVEL 4: PG 13
LEVEL 3: PG
LEVEL 1: G
The parental lock levels for “CANADA” are included for future use.
Check the appropriate parental lock level when you buy a DVD video
disc equipped with the parental lock feature in the future.
To change your 4-digit security code:
After selecting “On” or “Off” 42 , press the STOP button for times,
then press the ENTER button.
STOP
STOP
STOP
STOP
ENTER
The 4-digit security code is cleared.
Press the number buttons to create a new 4-digit security code, then
press the ENTER button.
(Continued)
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Function Setup
To change the parental lock level:
Follow the above procedure.
Customizing the Function Settings (continued)
OPERATION Setting (continued)
(Continued)
Remote Confirmation
DVD
VCD
CD
On: Beeper sounds with each remote operation.
Off: The beeper does not sound.
OPERATION
Pause/Still
Parental Lock
Remote Confirmation
Title Stop
PBC
Auto
Off
On
Off
On
Off
On
ENTER
ENTER
Select "On" or "Off" by pressing
and then press ENTER.
/
,
/
,
If you do not make any other settings,
proceed to step 4.
DVD
Title Stop
On: Player stops after playback of a title is completed.
Off: Player continues after playback of a title is completed.
OPERATION
Pause/Still
Parental Lock
Remote Confirmation
Title Stop
PBC
PBC
Auto
Off
On
Off
On
Off
On
ENTER
ENTER
Select "On" or "Off" by pressing
and then press ENTER.
If you do not adjust any other settings,
proceed to step 4.
VCD
On: To view the menu screen when playing a PBC-featured VIDEO CD.
Off: For playing without using the menu screen.
OPERATION
Pause/Still
Parental Lock
Remote Confirmation
Title Stop
PBC
Auto
Off
On
Off
On
Off
On
* PBC is the abbreviation of
Playback Control.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
ENTER
ENTER
Select "On" or "Off" by pressing
and then press ENTER.
If you do not make any other settings,
proceed to step 4.
/
,
4
3
RETURN
1
2
3
4
5
6
7
8
9
+10
0
RETURN
REMOTE CONTROLLER
: If you press the RETURN button while a menu appears on the screen,
you will return to the previous menu screen displayed.
DVD
4
SET UP
VCD
CD
Press SETUP.
Function Setup
The setting menu disappears.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Table of Languages
Table of Languages and Their Abbreviations
Abbreviation Language
of the
Language
–––
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali,Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Abbreviation Language
of the
Language
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Abbreviation Language
of the
Language
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
Lingala
Laotian
Lithuanian
Latvian,Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto,Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Abbreviation Language
of the
Language
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Notes on Discs
This section shows you how to handle, clean, and store discs.
On Handling Discs
Playable Discs
• Do not touch the playback side of the disc.
This DVD video player can play back the following discs.
Disc mark
Playback side
• Do not attach paper or tape to discs.
On Cleaning Discs
• Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outwards with a
soft cloth. Always keep the disc clean.
DVD
video
discs
VIDEO
CDs
Contents
Disc
size
Audio
+
Video
(moving
pictures)
12 cm
Audio +
Video
(moving
pictures)
Audio
CDs
Audio
8 cm
Maximum
playback time
Approx. 4 hours
(single sided disc)
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
Approx. 160 minutes
(double sided disc)
12 cm
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm (CD Approx. 20 minutes
single)
You cannot play back discs other than those listed above.
This DVD video player uses the PAL/NTSC color system, and cannot play
back DVD video discs recorded in any other color system (SECAM, etc.).
On Storing Discs
• Do not store discs in a place subject to direct sunlight or
near heat sources.
• Do not store discs in places subject to moisture and dust
such as a bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects
on discs outside of their case may cause warping.
About This Instruction Manual
This instruction manual explains the basic instructions of this
DVD player. Some DVD video discs are produced in a manner
that allows specific or limited operation during playback, As
such, the DVD player may not respond to all operating
commands. Refer to instruction notes of discs.
” may appear on the TV screen during operation. A “
”
“
means that the operation is not permitted by the DVD player
or the disc.
Notes on Region Numbers
The region number of this DVD player is 1. If region numbers,
which stand for their playable area, are printed on your DVD
, disc playback will
video disc and you do not find 1 or
not be allowed by the player. (In this case, the DVD player
displays the message.)
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Avoid using heart-shaped or octagonal discs. Playing irregularly
shaped discs may damage the internal mechanism of the DVD player.
Do not use discs on which adhesive from adhesive tape or a disc
label (if it is a rental disc) remains. Otherwise, you may not be able to
eject the discs or the DVD player may become inoperative.
On VIDEO CDs
This DVD video player supports the VIDEO CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of Playback
Control.)
You can enjoy two playback variations depending on types of discs.
• VIDEO CD not equipped with PBC function (Version 1.1)
Sound and movie can be played on this DVD video player in the
same way as an audio CD.
• VIDEO CD equipped with PBC function (Version 2.0)
In addition to operation of the VIDEO CD not equipped with the
PBC function, you can enjoy playback with interactive software
and with search function by using the menu displayed on the
TV screen (Menu Playback). Some of the functions described in
this owner’s manual may not work with some discs.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable,
play in public, and rent copyrighted material without permission.
DVD video discs are copy protected, and any recordings made
from these discs will be distorted.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Others
• If you cannot wipe off the dust with a soft cloth, wipe the disc
lightly with a slightly moistened soft cloth and finish with a
dry cloth.
• Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl
LPs. It may damage the disc.
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and Correction
Symptom
Cause
Correction
No power.
The power plug is disconnected.
Connect the power plug into the wall outlet
securely.
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode on
the TV so the picture from the DVD player
appears on the TV screen.
• The video cable is not connected securely.
• Connect the video cable into the jacks
securely.
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
• Select the correct input mode of the audio
receiver so you can listen to the sound from
the DVD player.
• The audio cables are not connected
securely.
• Connect the audio cable into the jacks
securely.
No sound.
• The power of the equipment connected with • Turn on the equipment connected with the
audio cable.
the audio cable is turned off.
Page
12, 13
16
12-15
16
12-15
–
29, 32,
38
• The setting of output sound type is not
correct.
• Set the audio setting correctly.
The playback picture has
occasional distortion.
• The disc is dirty.
• Eject the disc and clean it.
47
• It is in fast forward or fast reverse playback.
• Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
–
Brightness is unstable or
noises are produced on
playback pictures.
• The copy protection's effect.
• Connect the DVD player directly to the TV.
Avoid connecting the DVD player to a VCR
or TV/VCR combination.
12
The DVD player does not start
playback.
• No disc is inserted.
• Insert a disc. (Check that the DVD or VIDEO
CD/audio CD indicator in the DVD display is lit.)
9
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type
and color system.)
47
• The disc is placed upside down.
• Place the disc with the playback side down.
16
• The disc is not placed within the guide.
• Place the disc on the disc tray correctly
inside the guide.
16
• The disc is dirty.
• Clean the disc.
• The parental lock function is set.
• Cancel the parental lock function or change
the parental lock level.
Buttons do not work.
Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operation.
Turn the power on or off with the POWER
button. Or disconnect the power plug and
insert it into the wall outlet again.
–
The remote controller does not
work properly.
• The remote controller is not pointed at the
remote sensor of the DVD player.
• Point the remote controller at the remote
sensor of the DVD player.
11
• The remote controller is too far from the
DVD player.
• Operate the remote controller within about 5 m.
11
• The batteries in the remote controller are
exhausted.
• Replace the batteries with new ones.
11
This unit contains a sensitive microcomputer, which under certain circumstances might fail to operate due to excessive noise
interference. In such case, disconnect the AC power from the electrical outlet, wait five seconds and replace.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
47
32, 42
Specifications
DVD Player/Outputs/Supplied Accessories
DVD Player
Power supply
AC 120 V, 60 Hz
Power consumption
20 W
Weight
4.5 kg
External dimensions
435 × 121 × 306 mm (W/H/D)
Signal system
Standard NTSC
Laser
Semiconductor laser, wavelength 650 nm
Frequency range (digital audio)
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Audio CD :
4 Hz to 20 kHz
Signal-to-noise ratio (digital audio)
More than 106 dB (EIAJ)
Audio dynamic range (digital audio)
More than 96 dB (EIAJ)
Harmonic distortion (digital audio)
Less than 0.005 %
Wow and flutter
Below measurable level (less than ±0.001 % (W.PEAK)) (EIAJ)
Operating conditions
Temperature: 5 °C to 35 °C (41 to 95 Degree), Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
S video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1
(C) 0.286 V (p-p), 75 Ω
Color different output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
(Cb)/(Cr) 0.7 V (p-p), 75 Ω
Audio output (optical audio)
Optical connector × 1
Audio output (digital audio)
0.5 V (p-p), 75 Ω, pin jack × 1
Audio output (analog audio)
2.0 V (rms), 470 Ω, pin jack (L, R) × 1
Headphone terminal
32 Ω (10mW), Impedance; more than 8 Ω
Supplied Accessories
S video cable ....................................................................... 1
Audio·video connection cable .............................................. 1
Remote controller (RC-388DV) ............................................ 1
Batteries (AA) ...................................................................... 2
z cable .............................................................................. 1
Others
• Designs and specifications are subject to change without notice.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Memo
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Others
Memo
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Sales & Product Planning Div.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 0720-31-8111 Fax: 0720-33-5222
ONKYO U.S.A. CORPORATION
200 Williams Drive, Ramsey, N.J. 07446, U.S.A.
Tel: 201-825-7950 Fax: 201-825-8150 E-mail: [email protected]
ONKYO EUROPE ELECTRONICS GmbH
Industriestrasse 20, 82110 Germering, GERMANY
Tel: 089 84 93 20 Fax: 089 84 93 226 E-mail: [email protected]
ONKYO EUROPE FRANCE BRANCH
Domaine Technologique de Saclay 4, Rue René Razel, SACLAY-91892
ORSAY CEDEX, FRANCE Tel: (1) 69 33 14 00 Fax: (1) 69 41 35 84
ONKYO CHINA LIMITED
Units 2102-7 Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852 2429 3118 Fax: 852 2428 9039
HOMEPAGE
http://www.onkyo.co.jp/
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
SN 29342658
Printed in Japan
D9808-1
E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement